提交 9ef8ca99 编写于 作者: M Matt Carlson 提交者: David S. Miller

[TG3]: Enable auto MDI.

This patch adds automatic MDI crossover support when autonegotiation is
turned off.  Automatic MDI crossover allows link to be established
without the use of a crossover cable.
Signed-off-by: NMatt Carlson <mcarlson@broadcom.com>
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 e8f3f6ca
......@@ -721,6 +721,44 @@ static int tg3_writephy(struct tg3 *tp, int reg, u32 val)
return ret;
}
static void tg3_phy_toggle_automdix(struct tg3 *tp, int enable)
{
u32 phy;
if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS) ||
(tp->tg3_flags2 & TG3_FLG2_ANY_SERDES))
return;
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
u32 ephy;
if (!tg3_readphy(tp, MII_TG3_EPHY_TEST, &ephy)) {
tg3_writephy(tp, MII_TG3_EPHY_TEST,
ephy | MII_TG3_EPHY_SHADOW_EN);
if (!tg3_readphy(tp, MII_TG3_EPHYTST_MISCCTRL, &phy)) {
if (enable)
phy |= MII_TG3_EPHYTST_MISCCTRL_MDIX;
else
phy &= ~MII_TG3_EPHYTST_MISCCTRL_MDIX;
tg3_writephy(tp, MII_TG3_EPHYTST_MISCCTRL, phy);
}
tg3_writephy(tp, MII_TG3_EPHY_TEST, ephy);
}
} else {
phy = MII_TG3_AUXCTL_MISC_RDSEL_MISC |
MII_TG3_AUXCTL_SHDWSEL_MISC;
if (!tg3_writephy(tp, MII_TG3_AUX_CTRL, phy) &&
!tg3_readphy(tp, MII_TG3_AUX_CTRL, &phy)) {
if (enable)
phy |= MII_TG3_AUXCTL_MISC_FORCE_AMDIX;
else
phy &= ~MII_TG3_AUXCTL_MISC_FORCE_AMDIX;
phy |= MII_TG3_AUXCTL_MISC_WREN;
tg3_writephy(tp, MII_TG3_AUX_CTRL, phy);
}
}
}
static void tg3_phy_set_wirespeed(struct tg3 *tp)
{
u32 val;
......@@ -1045,23 +1083,11 @@ static int tg3_phy_reset(struct tg3 *tp)
}
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
u32 phy_reg;
/* adjust output voltage */
tg3_writephy(tp, MII_TG3_EPHY_PTEST, 0x12);
if (!tg3_readphy(tp, MII_TG3_EPHY_TEST, &phy_reg)) {
u32 phy_reg2;
tg3_writephy(tp, MII_TG3_EPHY_TEST,
phy_reg | MII_TG3_EPHY_SHADOW_EN);
/* Enable auto-MDIX */
if (!tg3_readphy(tp, 0x10, &phy_reg2))
tg3_writephy(tp, 0x10, phy_reg2 | 0x4000);
tg3_writephy(tp, MII_TG3_EPHY_TEST, phy_reg);
}
}
tg3_phy_toggle_automdix(tp, 1);
tg3_phy_set_wirespeed(tp);
return 0;
}
......@@ -8847,14 +8873,14 @@ static int tg3_run_loopback(struct tg3 *tp, int loopback_mode)
phytest | MII_TG3_EPHY_SHADOW_EN);
if (!tg3_readphy(tp, 0x1b, &phy))
tg3_writephy(tp, 0x1b, phy & ~0x20);
if (!tg3_readphy(tp, 0x10, &phy))
tg3_writephy(tp, 0x10, phy & ~0x4000);
tg3_writephy(tp, MII_TG3_EPHY_TEST, phytest);
}
val = BMCR_LOOPBACK | BMCR_FULLDPLX | BMCR_SPEED100;
} else
val = BMCR_LOOPBACK | BMCR_FULLDPLX | BMCR_SPEED1000;
tg3_phy_toggle_automdix(tp, 0);
tg3_writephy(tp, MII_BMCR, val);
udelay(40);
......
......@@ -1642,6 +1642,11 @@
#define MII_TG3_AUX_CTRL 0x18 /* auxilliary control register */
#define MII_TG3_AUXCTL_MISC_WREN 0x8000
#define MII_TG3_AUXCTL_MISC_FORCE_AMDIX 0x0200
#define MII_TG3_AUXCTL_MISC_RDSEL_MISC 0x7000
#define MII_TG3_AUXCTL_SHDWSEL_MISC 0x0007
#define MII_TG3_AUX_STAT 0x19 /* auxilliary status register */
#define MII_TG3_AUX_STAT_LPASS 0x0004
#define MII_TG3_AUX_STAT_SPDMASK 0x0700
......@@ -1667,6 +1672,9 @@
#define MII_TG3_EPHY_TEST 0x1f /* 5906 PHY register */
#define MII_TG3_EPHY_SHADOW_EN 0x80
#define MII_TG3_EPHYTST_MISCCTRL 0x10 /* 5906 EPHY misc ctrl shadow register */
#define MII_TG3_EPHYTST_MISCCTRL_MDIX 0x4000
#define MII_TG3_TEST1 0x1e
#define MII_TG3_TEST1_TRIM_EN 0x0010
#define MII_TG3_TEST1_CRC_EN 0x8000
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册