提交 9d31d35b 编写于 作者: Y Yinghai Lu 提交者: Ingo Molnar

x86: order functions in cpu/common.c and cpu/common_64.c v2

v2: make 64 bit get c->x86_cache_alignment = c->x86_clfush_size
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
上级 3da99c97
......@@ -60,6 +60,18 @@ EXPORT_PER_CPU_SYMBOL_GPL(gdt_page);
__u32 cleared_cpu_caps[NCAPINTS] __cpuinitdata;
/* Current gdt points %fs at the "master" per-cpu area: after this,
* it's on the real one. */
void switch_to_new_gdt(void)
{
struct desc_ptr gdt_descr;
gdt_descr.address = (long)get_cpu_gdt_table(smp_processor_id());
gdt_descr.size = GDT_SIZE - 1;
load_gdt(&gdt_descr);
asm("mov %0, %%fs" : : "r" (__KERNEL_PERCPU) : "memory");
}
static int cachesize_override __cpuinitdata = -1;
static int disable_x86_serial_nr __cpuinitdata = 1;
......@@ -123,15 +135,15 @@ int __cpuinit get_model_name(struct cpuinfo_x86 *c)
void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c)
{
unsigned int n, dummy, ecx, edx, l2size;
unsigned int n, dummy, ebx, ecx, edx, l2size;
n = c->extended_cpuid_level;
if (n >= 0x80000005) {
cpuid(0x80000005, &dummy, &dummy, &ecx, &edx);
cpuid(0x80000005, &dummy, &ebx, &ecx, &edx);
printk(KERN_INFO "CPU: L1 I Cache: %dK (%d bytes/line), D cache %dK (%d bytes/line)\n",
edx>>24, edx&0xFF, ecx>>24, ecx&0xFF);
c->x86_cache_size = (ecx>>24)+(edx>>24);
edx>>24, edx&0xFF, ecx>>24, ecx&0xFF);
c->x86_cache_size = (ecx>>24) + (edx>>24);
}
if (n < 0x80000006) /* Some chips just has a large L1. */
......@@ -185,6 +197,51 @@ static char __cpuinit *table_lookup_model(struct cpuinfo_x86 *c)
return NULL; /* Not found */
}
#ifdef CONFIG_X86_HT
void __cpuinit detect_ht(struct cpuinfo_x86 *c)
{
u32 eax, ebx, ecx, edx;
int index_msb, core_bits;
cpuid(1, &eax, &ebx, &ecx, &edx);
if (!cpu_has(c, X86_FEATURE_HT) || cpu_has(c, X86_FEATURE_CMP_LEGACY))
return;
smp_num_siblings = (ebx & 0xff0000) >> 16;
if (smp_num_siblings == 1) {
printk(KERN_INFO "CPU: Hyper-Threading is disabled\n");
} else if (smp_num_siblings > 1) {
if (smp_num_siblings > NR_CPUS) {
printk(KERN_WARNING "CPU: Unsupported number of siblings %d",
smp_num_siblings);
smp_num_siblings = 1;
return;
}
index_msb = get_count_order(smp_num_siblings);
c->phys_proc_id = phys_pkg_id(c->initial_apicid, index_msb);
printk(KERN_INFO "CPU: Physical Processor ID: %d\n",
c->phys_proc_id);
smp_num_siblings = smp_num_siblings / c->x86_max_cores;
index_msb = get_count_order(smp_num_siblings);
core_bits = get_count_order(c->x86_max_cores);
c->cpu_core_id = phys_pkg_id(c->initial_apicid, index_msb) &
((1 << core_bits) - 1);
if (c->x86_max_cores > 1)
printk(KERN_INFO "CPU: Processor Core ID: %d\n",
c->cpu_core_id);
}
}
#endif
static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c)
{
......@@ -258,7 +315,26 @@ static int __cpuinit have_cpuid_p(void)
return flag_is_changeable_p(X86_EFLAGS_ID);
}
void __init cpu_detect(struct cpuinfo_x86 *c)
static void __init early_cpu_support_print(void)
{
int i,j;
struct cpu_dev *cpu_devx;
printk("KERNEL supported cpus:\n");
for (i = 0; i < X86_VENDOR_NUM; i++) {
cpu_devx = cpu_devs[i];
if (!cpu_devx)
continue;
for (j = 0; j < 2; j++) {
if (!cpu_devx->c_ident[j])
continue;
printk(" %s %s\n", cpu_devx->c_vendor,
cpu_devx->c_ident[j]);
}
}
}
void __cpuinit cpu_detect(struct cpuinfo_x86 *c)
{
/* Get vendor name */
cpuid(0x00000000, (unsigned int *)&c->cpuid_level,
......@@ -267,19 +343,20 @@ void __init cpu_detect(struct cpuinfo_x86 *c)
(unsigned int *)&c->x86_vendor_id[4]);
c->x86 = 4;
/* Intel-defined flags: level 0x00000001 */
if (c->cpuid_level >= 0x00000001) {
u32 junk, tfms, cap0, misc;
cpuid(0x00000001, &tfms, &misc, &junk, &cap0);
c->x86 = (tfms >> 8) & 15;
c->x86_model = (tfms >> 4) & 15;
c->x86 = (tfms >> 8) & 0xf;
c->x86_model = (tfms >> 4) & 0xf;
c->x86_mask = tfms & 0xf;
if (c->x86 == 0xf)
c->x86 += (tfms >> 20) & 0xff;
if (c->x86 >= 0x6)
c->x86_model += ((tfms >> 16) & 0xF) << 4;
c->x86_mask = tfms & 15;
c->x86_model += ((tfms >> 16) & 0xf) << 4;
if (cap0 & (1<<19)) {
c->x86_cache_alignment = ((misc >> 8) & 0xff) * 8;
c->x86_clflush_size = ((misc >> 8) & 0xff) * 8;
c->x86_cache_alignment = c->x86_clflush_size;
}
}
}
......@@ -341,6 +418,17 @@ static void __init early_identify_cpu(struct cpuinfo_x86 *c)
validate_pat_support(c);
}
void __init early_cpu_init(void)
{
struct cpu_vendor_dev *cvdev;
for (cvdev = __x86cpuvendor_start; cvdev < __x86cpuvendor_end; cvdev++)
cpu_devs[cvdev->vendor] = cvdev->cpu_dev;
early_cpu_support_print();
early_identify_cpu(&boot_cpu_data);
}
/*
* The NOPL instruction is supposed to exist on all CPUs with
* family >= 6, unfortunately, that's not true in practice because
......@@ -500,7 +588,7 @@ static void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
*/
if (c != &boot_cpu_data) {
/* AND the already accumulated flags with these */
for (i = 0 ; i < NCAPINTS ; i++)
for (i = 0; i < NCAPINTS; i++)
boot_cpu_data.x86_capability[i] &= c->x86_capability[i];
}
......@@ -529,52 +617,6 @@ void __cpuinit identify_secondary_cpu(struct cpuinfo_x86 *c)
mtrr_ap_init();
}
#ifdef CONFIG_X86_HT
void __cpuinit detect_ht(struct cpuinfo_x86 *c)
{
u32 eax, ebx, ecx, edx;
int index_msb, core_bits;
cpuid(1, &eax, &ebx, &ecx, &edx);
if (!cpu_has(c, X86_FEATURE_HT) || cpu_has(c, X86_FEATURE_CMP_LEGACY))
return;
smp_num_siblings = (ebx & 0xff0000) >> 16;
if (smp_num_siblings == 1) {
printk(KERN_INFO "CPU: Hyper-Threading is disabled\n");
} else if (smp_num_siblings > 1) {
if (smp_num_siblings > NR_CPUS) {
printk(KERN_WARNING "CPU: Unsupported number of the "
"siblings %d", smp_num_siblings);
smp_num_siblings = 1;
return;
}
index_msb = get_count_order(smp_num_siblings);
c->phys_proc_id = phys_pkg_id(c->initial_apicid, index_msb);
printk(KERN_INFO "CPU: Physical Processor ID: %d\n",
c->phys_proc_id);
smp_num_siblings = smp_num_siblings / c->x86_max_cores;
index_msb = get_count_order(smp_num_siblings) ;
core_bits = get_count_order(c->x86_max_cores);
c->cpu_core_id = phys_pkg_id(c->initial_apicid, index_msb) &
((1 << core_bits) - 1);
if (c->x86_max_cores > 1)
printk(KERN_INFO "CPU: Processor Core ID: %d\n",
c->cpu_core_id);
}
}
#endif
static __init int setup_noclflush(char *arg)
{
setup_clear_cpu_cap(X86_FEATURE_CLFLSH);
......@@ -592,17 +634,17 @@ void __cpuinit print_cpu_info(struct cpuinfo_x86 *c)
vendor = c->x86_vendor_id;
if (vendor && strncmp(c->x86_model_id, vendor, strlen(vendor)))
printk("%s ", vendor);
printk(KERN_CONT "%s ", vendor);
if (!c->x86_model_id[0])
printk("%d86", c->x86);
if (c->x86_model_id[0])
printk(KERN_CONT "%s", c->x86_model_id);
else
printk("%s", c->x86_model_id);
printk(KERN_CONT "%d86", c->x86);
if (c->x86_mask || c->cpuid_level >= 0)
printk(" stepping %02x\n", c->x86_mask);
printk(KERN_CONT " stepping %02x\n", c->x86_mask);
else
printk("\n");
printk(KERN_CONT "\n");
}
static __init int setup_disablecpuid(char *arg)
......@@ -618,16 +660,6 @@ __setup("clearcpuid=", setup_disablecpuid);
cpumask_t cpu_initialized __cpuinitdata = CPU_MASK_NONE;
void __init early_cpu_init(void)
{
struct cpu_vendor_dev *cvdev;
for (cvdev = __x86cpuvendor_start; cvdev < __x86cpuvendor_end; cvdev++)
cpu_devs[cvdev->vendor] = cvdev->cpu_dev;
early_identify_cpu(&boot_cpu_data);
}
/* Make sure %fs is initialized properly in idle threads */
struct pt_regs * __cpuinit idle_regs(struct pt_regs *regs)
{
......@@ -636,18 +668,6 @@ struct pt_regs * __cpuinit idle_regs(struct pt_regs *regs)
return regs;
}
/* Current gdt points %fs at the "master" per-cpu area: after this,
* it's on the real one. */
void switch_to_new_gdt(void)
{
struct desc_ptr gdt_descr;
gdt_descr.address = (long)get_cpu_gdt_table(smp_processor_id());
gdt_descr.size = GDT_SIZE - 1;
load_gdt(&gdt_descr);
asm("mov %0, %%fs" : : "r" (__KERNEL_PERCPU) : "memory");
}
/*
* cpu_init() initializes state that is per-CPU. Some data is already
* initialized (naturally) in the bootstrap process, such as the GDT
......
......@@ -103,9 +103,8 @@ void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c)
if (n >= 0x80000005) {
cpuid(0x80000005, &dummy, &ebx, &ecx, &edx);
printk(KERN_INFO "CPU: L1 I Cache: %dK (%d bytes/line), "
"D cache %dK (%d bytes/line)\n",
edx>>24, edx&0xFF, ecx>>24, ecx&0xFF);
printk(KERN_INFO "CPU: L1 I Cache: %dK (%d bytes/line), D cache %dK (%d bytes/line)\n",
edx>>24, edx&0xFF, ecx>>24, ecx&0xFF);
c->x86_cache_size = (ecx>>24) + (edx>>24);
/* On K8 L1 TLB is inclusive, so don't count it */
c->x86_tlbsize = 0;
......@@ -143,8 +142,8 @@ void __cpuinit detect_ht(struct cpuinfo_x86 *c)
} else if (smp_num_siblings > 1) {
if (smp_num_siblings > NR_CPUS) {
printk(KERN_WARNING "CPU: Unsupported number of "
"siblings %d", smp_num_siblings);
printk(KERN_WARNING "CPU: Unsupported number of siblings %d",
smp_num_siblings);
smp_num_siblings = 1;
return;
}
......@@ -182,7 +181,7 @@ static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c)
if (cpu_devs[i]) {
if (!strcmp(v, cpu_devs[i]->c_ident[0]) ||
(cpu_devs[i]->c_ident[1] &&
!strcmp(v, cpu_devs[i]->c_ident[1]))) {
!strcmp(v, cpu_devs[i]->c_ident[1]))) {
c->x86_vendor = i;
this_cpu = cpu_devs[i];
return;
......@@ -217,39 +216,6 @@ static void __init early_cpu_support_print(void)
}
}
/*
* The NOPL instruction is supposed to exist on all CPUs with
* family >= 6, unfortunately, that's not true in practice because
* of early VIA chips and (more importantly) broken virtualizers that
* are not easy to detect. Hence, probe for it based on first
* principles.
*
* Note: no 64-bit chip is known to lack these, but put the code here
* for consistency with 32 bits, and to make it utterly trivial to
* diagnose the problem should it ever surface.
*/
static void __cpuinit detect_nopl(struct cpuinfo_x86 *c)
{
const u32 nopl_signature = 0x888c53b1; /* Random number */
u32 has_nopl = nopl_signature;
clear_cpu_cap(c, X86_FEATURE_NOPL);
if (c->x86 >= 6) {
asm volatile("\n"
"1: .byte 0x0f,0x1f,0xc0\n" /* nopl %eax */
"2:\n"
" .section .fixup,\"ax\"\n"
"3: xor %0,%0\n"
" jmp 2b\n"
" .previous\n"
_ASM_EXTABLE(1b,3b)
: "+a" (has_nopl));
if (has_nopl == nopl_signature)
set_cpu_cap(c, X86_FEATURE_NOPL);
}
}
void __cpuinit cpu_detect(struct cpuinfo_x86 *c)
{
/* Get vendor name */
......@@ -258,6 +224,7 @@ void __cpuinit cpu_detect(struct cpuinfo_x86 *c)
(unsigned int *)&c->x86_vendor_id[8],
(unsigned int *)&c->x86_vendor_id[4]);
c->x86 = 4;
/* Intel-defined flags: level 0x00000001 */
if (c->cpuid_level >= 0x00000001) {
u32 junk, tfms, cap0, misc;
......@@ -268,12 +235,11 @@ void __cpuinit cpu_detect(struct cpuinfo_x86 *c)
if (c->x86 == 0xf)
c->x86 += (tfms >> 20) & 0xff;
if (c->x86 >= 0x6)
c->x86_model += ((tfms >> 16) & 0xF) << 4;
if (cap0 & (1<<19))
c->x86_model += ((tfms >> 16) & 0xf) << 4;
if (cap0 & (1<<19)) {
c->x86_clflush_size = ((misc >> 8) & 0xff) * 8;
} else {
/* Have CPUID level 0 only - unheard of */
c->x86 = 4;
c->x86_cache_alignment = c->x86_clflush_size;
}
}
}
......@@ -283,9 +249,6 @@ static void __cpuinit get_cpu_cap(struct cpuinfo_x86 *c)
u32 tfms, xlvl;
u32 ebx;
/* Initialize the standard set of capabilities */
/* Note that the vendor-specific code below might override */
/* Intel-defined flags: level 0x00000001 */
if (c->cpuid_level >= 0x00000001) {
u32 capability, excap;
......@@ -361,6 +324,39 @@ void __init early_cpu_init(void)
early_identify_cpu(&boot_cpu_data);
}
/*
* The NOPL instruction is supposed to exist on all CPUs with
* family >= 6, unfortunately, that's not true in practice because
* of early VIA chips and (more importantly) broken virtualizers that
* are not easy to detect. Hence, probe for it based on first
* principles.
*
* Note: no 64-bit chip is known to lack these, but put the code here
* for consistency with 32 bits, and to make it utterly trivial to
* diagnose the problem should it ever surface.
*/
static void __cpuinit detect_nopl(struct cpuinfo_x86 *c)
{
const u32 nopl_signature = 0x888c53b1; /* Random number */
u32 has_nopl = nopl_signature;
clear_cpu_cap(c, X86_FEATURE_NOPL);
if (c->x86 >= 6) {
asm volatile("\n"
"1: .byte 0x0f,0x1f,0xc0\n" /* nopl %eax */
"2:\n"
" .section .fixup,\"ax\"\n"
"3: xor %0,%0\n"
" jmp 2b\n"
" .previous\n"
_ASM_EXTABLE(1b,3b)
: "+a" (has_nopl));
if (has_nopl == nopl_signature)
set_cpu_cap(c, X86_FEATURE_NOPL);
}
}
static void __cpuinit generic_identify(struct cpuinfo_x86 *c)
{
c->extended_cpuid_level = 0;
......@@ -448,7 +444,7 @@ static void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
}
void __cpuinit identify_boot_cpu(void)
void __init identify_boot_cpu(void)
{
identify_cpu(&boot_cpu_data);
}
......@@ -460,13 +456,6 @@ void __cpuinit identify_secondary_cpu(struct cpuinfo_x86 *c)
mtrr_ap_init();
}
static __init int setup_noclflush(char *arg)
{
setup_clear_cpu_cap(X86_FEATURE_CLFLSH);
return 1;
}
__setup("noclflush", setup_noclflush);
struct msr_range {
unsigned min;
unsigned max;
......@@ -510,6 +499,13 @@ static __init int setup_show_msr(char *arg)
}
__setup("show_msr=", setup_show_msr);
static __init int setup_noclflush(char *arg)
{
setup_clear_cpu_cap(X86_FEATURE_CLFLSH);
return 1;
}
__setup("noclflush", setup_noclflush);
void __cpuinit print_cpu_info(struct cpuinfo_x86 *c)
{
if (c->x86_model_id[0])
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册