diff --git a/Documentation/edac.txt b/Documentation/edac.txt index 79c533223762baa0df825995068b3c6475d90b8b..0b875e8da96965316d0bca49185d5a28b6d25649 100644 --- a/Documentation/edac.txt +++ b/Documentation/edac.txt @@ -6,6 +6,8 @@ Written by Doug Thompson 7 Dec 2005 17 Jul 2007 Updated +(c) Mauro Carvalho Chehab +05 Aug 2009 Nehalem interface EDAC is maintained and written by: @@ -717,3 +719,153 @@ unique drivers for their hardware systems. The 'test_device_edac' sample driver is located at the bluesmoke.sourceforge.net project site for EDAC. +======================================================================= +NEHALEM USAGE OF EDAC APIs + +This chapter documents some EXPERIMENTAL mappings for EDAC API to handle +Nehalem EDAC driver. They will likely be changed on future versions +of the driver. + +Due to the way Nehalem exports Memory Controller data, some adjustments +were done at i7core_edac driver. This chapter will cover those differences + +1) On Nehalem, there are one Memory Controller per Quick Patch Interconnect + (QPI). At the driver, the term "socket" means one QPI. This is + associated with a physical CPU socket. + + Each MC have 3 physical read channels, 3 physical write channels and + 3 logic channels. The driver currenty sees it as just 3 channels. + Each channel can have up to 3 DIMMs. + + The minimum known unity is DIMMs. There are no information about csrows. + As EDAC API maps the minimum unity is csrows, the driver sequencially + maps channel/dimm into different csrows. + + For example, suposing the following layout: + Ch0 phy rd0, wr0 (0x063f4031): 2 ranks, UDIMMs + dimm 0 1024 Mb offset: 0, bank: 8, rank: 1, row: 0x4000, col: 0x400 + dimm 1 1024 Mb offset: 4, bank: 8, rank: 1, row: 0x4000, col: 0x400 + Ch1 phy rd1, wr1 (0x063f4031): 2 ranks, UDIMMs + dimm 0 1024 Mb offset: 0, bank: 8, rank: 1, row: 0x4000, col: 0x400 + Ch2 phy rd3, wr3 (0x063f4031): 2 ranks, UDIMMs + dimm 0 1024 Mb offset: 0, bank: 8, rank: 1, row: 0x4000, col: 0x400 + The driver will map it as: + csrow0: channel 0, dimm0 + csrow1: channel 0, dimm1 + csrow2: channel 1, dimm0 + csrow3: channel 2, dimm0 + +exports one + DIMM per csrow. + + Each QPI is exported as a different memory controller. + +2) Nehalem MC has the hability to generate errors. The driver implements this + functionality via some error injection nodes: + + For injecting a memory error, there are some sysfs nodes, under + /sys/devices/system/edac/mc/mc?/: + + inject_addrmatch/*: + Controls the error injection mask register. It is possible to specify + several characteristics of the address to match an error code: + dimm = the affected dimm. Numbers are relative to a channel; + rank = the memory rank; + channel = the channel that will generate an error; + bank = the affected bank; + page = the page address; + column (or col) = the address column. + each of the above values can be set to "any" to match any valid value. + + At driver init, all values are set to any. + + For example, to generate an error at rank 1 of dimm 2, for any channel, + any bank, any page, any column: + echo 2 >/sys/devices/system/edac/mc/mc0/inject_addrmatch/dimm + echo 1 >/sys/devices/system/edac/mc/mc0/inject_addrmatch/rank + + To return to the default behaviour of matching any, you can do: + echo any >/sys/devices/system/edac/mc/mc0/inject_addrmatch/dimm + echo any >/sys/devices/system/edac/mc/mc0/inject_addrmatch/rank + + inject_eccmask: + specifies what bits will have troubles, + + inject_section: + specifies what ECC cache section will get the error: + 3 for both + 2 for the highest + 1 for the lowest + + inject_type: + specifies the type of error, being a combination of the following bits: + bit 0 - repeat + bit 1 - ecc + bit 2 - parity + + inject_enable starts the error generation when something different + than 0 is written. + + All inject vars can be read. root permission is needed for write. + + Datasheet states that the error will only be generated after a write on an + address that matches inject_addrmatch. It seems, however, that reading will + also produce an error. + + For example, the following code will generate an error for any write access + at socket 0, on any DIMM/address on channel 2: + + echo 2 >/sys/devices/system/edac/mc/mc0/inject_addrmatch/channel + echo 2 >/sys/devices/system/edac/mc/mc0/inject_type + echo 64 >/sys/devices/system/edac/mc/mc0/inject_eccmask + echo 3 >/sys/devices/system/edac/mc/mc0/inject_section + echo 1 >/sys/devices/system/edac/mc/mc0/inject_enable + dd if=/dev/mem of=/dev/null seek=16k bs=4k count=1 >& /dev/null + + For socket 1, it is needed to replace "mc0" by "mc1" at the above + commands. + + The generated error message will look like: + + EDAC MC0: UE row 0, channel-a= 0 channel-b= 0 labels "-": NON_FATAL (addr = 0x0075b980, socket=0, Dimm=0, Channel=2, syndrome=0x00000040, count=1, Err=8c0000400001009f:4000080482 (read error: read ECC error)) + +3) Nehalem specific Corrected Error memory counters + + Nehalem have some registers to count memory errors. The driver uses those + registers to report Corrected Errors on devices with Registered Dimms. + + However, those counters don't work with Unregistered Dimms. As the chipset + offers some counters that also work with UDIMMS (but with a worse level of + granularity than the default ones), the driver exposes those registers for + UDIMM memories. + + They can be read by looking at the contents of all_channel_counts/ + + $ for i in /sys/devices/system/edac/mc/mc0/all_channel_counts/*; do echo $i; cat $i; done + /sys/devices/system/edac/mc/mc0/all_channel_counts/udimm0 + 0 + /sys/devices/system/edac/mc/mc0/all_channel_counts/udimm1 + 0 + /sys/devices/system/edac/mc/mc0/all_channel_counts/udimm2 + 0 + + What happens here is that errors on different csrows, but at the same + dimm number will increment the same counter. + So, in this memory mapping: + csrow0: channel 0, dimm0 + csrow1: channel 0, dimm1 + csrow2: channel 1, dimm0 + csrow3: channel 2, dimm0 + The hardware will increment udimm0 for an error at the first dimm at either + csrow0, csrow2 or csrow3; + The hardware will increment udimm1 for an error at the second dimm at either + csrow0, csrow2 or csrow3; + The hardware will increment udimm2 for an error at the third dimm at either + csrow0, csrow2 or csrow3; + +4) Standard error counters + + The standard error counters are generated when an mcelog error is received + by the driver. Since, with udimm, this is counted by software, it is + possible that some errors could be lost. With rdimm's, they displays the + contents of the registers diff --git a/arch/x86/include/asm/pci_x86.h b/arch/x86/include/asm/pci_x86.h index 8d8797eae5d704e238d764b4b4d1e7254c2ecc62..cd2a31dc5fb8e4a956c8c34125534540d51b08f4 100644 --- a/arch/x86/include/asm/pci_x86.h +++ b/arch/x86/include/asm/pci_x86.h @@ -53,6 +53,8 @@ extern int pcibios_last_bus; extern struct pci_bus *pci_root_bus; extern struct pci_ops pci_root_ops; +void pcibios_scan_specific_bus(int busn); + /* pci-irq.c */ struct irq_info { diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index 707165dbc20343310147dcd483605b7bfde456f0..18cc4256225081077161c027a9bb1bae1013ab44 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -36,6 +36,7 @@ #include #include #include +#include #include #include @@ -168,6 +169,15 @@ void mce_log(struct mce *mce) for (;;) { entry = rcu_dereference_check_mce(mcelog.next); for (;;) { + /* + * If edac_mce is enabled, it will check the error type + * and will process it, if it is a known error. + * Otherwise, the error will be sent through mcelog + * interface + */ + if (edac_mce_parse(mce)) + return; + /* * When the buffer fills up discard new entries. * Assume that the earlier errors are the more diff --git a/arch/x86/pci/legacy.c b/arch/x86/pci/legacy.c index 0db5eaf54560b3ec1d8083ee8e69d8a1057a045c..8d460eaf524f1d6f1a54b3853de221e7b38d9e6d 100644 --- a/arch/x86/pci/legacy.c +++ b/arch/x86/pci/legacy.c @@ -11,28 +11,14 @@ */ static void __devinit pcibios_fixup_peer_bridges(void) { - int n, devfn; - long node; + int n; if (pcibios_last_bus <= 0 || pcibios_last_bus > 0xff) return; DBG("PCI: Peer bridge fixup\n"); - for (n=0; n <= pcibios_last_bus; n++) { - u32 l; - if (pci_find_bus(0, n)) - continue; - node = get_mp_bus_to_node(n); - for (devfn = 0; devfn < 256; devfn += 8) { - if (!raw_pci_read(0, n, devfn, PCI_VENDOR_ID, 2, &l) && - l != 0x0000 && l != 0xffff) { - DBG("Found device at %02x:%02x [%04x]\n", n, devfn, l); - printk(KERN_INFO "PCI: Discovered peer bus %02x\n", n); - pci_scan_bus_on_node(n, &pci_root_ops, node); - break; - } - } - } + for (n=0; n <= pcibios_last_bus; n++) + pcibios_scan_specific_bus(n); } int __init pci_legacy_init(void) @@ -50,6 +36,28 @@ int __init pci_legacy_init(void) return 0; } +void pcibios_scan_specific_bus(int busn) +{ + int devfn; + long node; + u32 l; + + if (pci_find_bus(0, busn)) + return; + + node = get_mp_bus_to_node(busn); + for (devfn = 0; devfn < 256; devfn += 8) { + if (!raw_pci_read(0, busn, devfn, PCI_VENDOR_ID, 2, &l) && + l != 0x0000 && l != 0xffff) { + DBG("Found device at %02x:%02x [%04x]\n", busn, devfn, l); + printk(KERN_INFO "PCI: Discovered peer bus %02x\n", busn); + pci_scan_bus_on_node(busn, &pci_root_ops, node); + return; + } + } +} +EXPORT_SYMBOL_GPL(pcibios_scan_specific_bus); + int __init pci_subsys_init(void) { /* diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig index 55c9c59b3f713c0f29b211f89806f321fcffc879..aedef7941b22855f17c892f73d370ae10f17632c 100644 --- a/drivers/edac/Kconfig +++ b/drivers/edac/Kconfig @@ -69,6 +69,9 @@ config EDAC_MM_EDAC occurred so that a particular failing memory module can be replaced. If unsure, select 'Y'. +config EDAC_MCE + bool + config EDAC_AMD64 tristate "AMD64 (Opteron, Athlon64) K8, F10h, F11h" depends on EDAC_MM_EDAC && K8_NB && X86_64 && PCI && EDAC_DECODE_MCE @@ -166,6 +169,16 @@ config EDAC_I5400 Support for error detection and correction the Intel i5400 MCH chipset (Seaburg). +config EDAC_I7CORE + tristate "Intel i7 Core (Nehalem) processors" + depends on EDAC_MM_EDAC && PCI && X86 + select EDAC_MCE + help + Support for error detection and correction the Intel + i7 Core (Nehalem) Integrated Memory Controller that exists on + newer processors like i7 Core, i7 Core Extreme, Xeon 35xx + and Xeon 55xx processors. + config EDAC_I82860 tristate "Intel 82860" depends on EDAC_MM_EDAC && PCI && X86_32 diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile index bc5dc232a0fbf046b15a28ce069d232aa11fb2b2..ca6b1bb24ccc8e76109b13f38e1237eec98ec09e 100644 --- a/drivers/edac/Makefile +++ b/drivers/edac/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_EDAC) := edac_stub.o obj-$(CONFIG_EDAC_MM_EDAC) += edac_core.o +obj-$(CONFIG_EDAC_MCE) += edac_mce.o edac_core-objs := edac_mc.o edac_device.o edac_mc_sysfs.o edac_pci_sysfs.o edac_core-objs += edac_module.o edac_device_sysfs.o @@ -23,6 +24,7 @@ obj-$(CONFIG_EDAC_CPC925) += cpc925_edac.o obj-$(CONFIG_EDAC_I5000) += i5000_edac.o obj-$(CONFIG_EDAC_I5100) += i5100_edac.o obj-$(CONFIG_EDAC_I5400) += i5400_edac.o +obj-$(CONFIG_EDAC_I7CORE) += i7core_edac.o obj-$(CONFIG_EDAC_E7XXX) += e7xxx_edac.o obj-$(CONFIG_EDAC_E752X) += e752x_edac.o obj-$(CONFIG_EDAC_I82443BXGX) += i82443bxgx_edac.o diff --git a/drivers/edac/edac_core.h b/drivers/edac/edac_core.h index 001b2e797fb383a3c4f43f805a160d2bffc3b9d6..efca9343d26a7537df0c2a9a4a6eb546cc58cab3 100644 --- a/drivers/edac/edac_core.h +++ b/drivers/edac/edac_core.h @@ -341,12 +341,30 @@ struct csrow_info { struct channel_info *channels; }; +struct mcidev_sysfs_group { + const char *name; /* group name */ + struct mcidev_sysfs_attribute *mcidev_attr; /* group attributes */ +}; + +struct mcidev_sysfs_group_kobj { + struct list_head list; /* list for all instances within a mc */ + + struct kobject kobj; /* kobj for the group */ + + struct mcidev_sysfs_group *grp; /* group description table */ + struct mem_ctl_info *mci; /* the parent */ +}; + /* mcidev_sysfs_attribute structure * used for driver sysfs attributes and in mem_ctl_info * sysfs top level entries */ struct mcidev_sysfs_attribute { - struct attribute attr; + /* It should use either attr or grp */ + struct attribute attr; + struct mcidev_sysfs_group *grp; /* Points to a group of attributes */ + + /* Ops for show/store values at the attribute - not used on group */ ssize_t (*show)(struct mem_ctl_info *,char *); ssize_t (*store)(struct mem_ctl_info *, const char *,size_t); }; @@ -424,6 +442,9 @@ struct mem_ctl_info { /* edac sysfs device control */ struct kobject edac_mci_kobj; + /* list for all grp instances within a mc */ + struct list_head grp_kobj_list; + /* Additional top controller level attributes, but specified * by the low level driver. * diff --git a/drivers/edac/edac_mc_sysfs.c b/drivers/edac/edac_mc_sysfs.c index 418b65f1a1da858c5b127c863ced032f773424e1..c200c2fd43ea48d7d6e1e466a0150fe9e443885e 100644 --- a/drivers/edac/edac_mc_sysfs.c +++ b/drivers/edac/edac_mc_sysfs.c @@ -557,6 +557,8 @@ static ssize_t mcidev_show(struct kobject *kobj, struct attribute *attr, struct mem_ctl_info *mem_ctl_info = to_mci(kobj); struct mcidev_sysfs_attribute *mcidev_attr = to_mcidev_attr(attr); + debugf1("%s() mem_ctl_info %p\n", __func__, mem_ctl_info); + if (mcidev_attr->show) return mcidev_attr->show(mem_ctl_info, buffer); @@ -569,6 +571,8 @@ static ssize_t mcidev_store(struct kobject *kobj, struct attribute *attr, struct mem_ctl_info *mem_ctl_info = to_mci(kobj); struct mcidev_sysfs_attribute *mcidev_attr = to_mcidev_attr(attr); + debugf1("%s() mem_ctl_info %p\n", __func__, mem_ctl_info); + if (mcidev_attr->store) return mcidev_attr->store(mem_ctl_info, buffer, count); @@ -726,28 +730,118 @@ void edac_mc_unregister_sysfs_main_kobj(struct mem_ctl_info *mci) #define EDAC_DEVICE_SYMLINK "device" +#define grp_to_mci(k) (container_of(k, struct mcidev_sysfs_group_kobj, kobj)->mci) + +/* MCI show/store functions for top most object */ +static ssize_t inst_grp_show(struct kobject *kobj, struct attribute *attr, + char *buffer) +{ + struct mem_ctl_info *mem_ctl_info = grp_to_mci(kobj); + struct mcidev_sysfs_attribute *mcidev_attr = to_mcidev_attr(attr); + + debugf1("%s() mem_ctl_info %p\n", __func__, mem_ctl_info); + + if (mcidev_attr->show) + return mcidev_attr->show(mem_ctl_info, buffer); + + return -EIO; +} + +static ssize_t inst_grp_store(struct kobject *kobj, struct attribute *attr, + const char *buffer, size_t count) +{ + struct mem_ctl_info *mem_ctl_info = grp_to_mci(kobj); + struct mcidev_sysfs_attribute *mcidev_attr = to_mcidev_attr(attr); + + debugf1("%s() mem_ctl_info %p\n", __func__, mem_ctl_info); + + if (mcidev_attr->store) + return mcidev_attr->store(mem_ctl_info, buffer, count); + + return -EIO; +} + +/* No memory to release for this kobj */ +static void edac_inst_grp_release(struct kobject *kobj) +{ + struct mcidev_sysfs_group_kobj *grp; + struct mem_ctl_info *mci; + + debugf1("%s()\n", __func__); + + grp = container_of(kobj, struct mcidev_sysfs_group_kobj, kobj); + mci = grp->mci; + + kobject_put(&mci->edac_mci_kobj); +} + +/* Intermediate show/store table */ +static struct sysfs_ops inst_grp_ops = { + .show = inst_grp_show, + .store = inst_grp_store +}; + +/* the kobj_type instance for a instance group */ +static struct kobj_type ktype_inst_grp = { + .release = edac_inst_grp_release, + .sysfs_ops = &inst_grp_ops, +}; + + /* * edac_create_mci_instance_attributes - * create MC driver specific attributes at the topmost level - * directory of this mci instance. + * create MC driver specific attributes bellow an specified kobj + * This routine calls itself recursively, in order to create an entire + * object tree. */ -static int edac_create_mci_instance_attributes(struct mem_ctl_info *mci) +static int edac_create_mci_instance_attributes(struct mem_ctl_info *mci, + struct mcidev_sysfs_attribute *sysfs_attrib, + struct kobject *kobj) { int err; - struct mcidev_sysfs_attribute *sysfs_attrib; - /* point to the start of the array and iterate over it - * adding each attribute listed to this mci instance's kobject - */ - sysfs_attrib = mci->mc_driver_sysfs_attributes; + debugf1("%s()\n", __func__); + + while (sysfs_attrib) { + if (sysfs_attrib->grp) { + struct mcidev_sysfs_group_kobj *grp_kobj; + + grp_kobj = kzalloc(sizeof(*grp_kobj), GFP_KERNEL); + if (!grp_kobj) + return -ENOMEM; + + list_add_tail(&grp_kobj->list, &mci->grp_kobj_list); + + grp_kobj->grp = sysfs_attrib->grp; + grp_kobj->mci = mci; + + debugf0("%s() grp %s, mci %p\n", __func__, + sysfs_attrib->grp->name, mci); + + err = kobject_init_and_add(&grp_kobj->kobj, + &ktype_inst_grp, + &mci->edac_mci_kobj, + sysfs_attrib->grp->name); + if (err) + return err; + + err = edac_create_mci_instance_attributes(mci, + grp_kobj->grp->mcidev_attr, + &grp_kobj->kobj); + + if (err) + return err; + } else if (sysfs_attrib->attr.name) { + debugf0("%s() file %s\n", __func__, + sysfs_attrib->attr.name); + + err = sysfs_create_file(kobj, &sysfs_attrib->attr); + } else + break; - while (sysfs_attrib && sysfs_attrib->attr.name) { - err = sysfs_create_file(&mci->edac_mci_kobj, - (struct attribute*) sysfs_attrib); if (err) { return err; } - sysfs_attrib++; } @@ -759,21 +853,44 @@ static int edac_create_mci_instance_attributes(struct mem_ctl_info *mci) * remove MC driver specific attributes at the topmost level * directory of this mci instance. */ -static void edac_remove_mci_instance_attributes(struct mem_ctl_info *mci) +static void edac_remove_mci_instance_attributes(struct mem_ctl_info *mci, + struct mcidev_sysfs_attribute *sysfs_attrib, + struct kobject *kobj, int count) { - struct mcidev_sysfs_attribute *sysfs_attrib; + struct mcidev_sysfs_group_kobj *grp_kobj, *tmp; - /* point to the start of the array and iterate over it - * adding each attribute listed to this mci instance's kobject - */ - sysfs_attrib = mci->mc_driver_sysfs_attributes; + debugf1("%s()\n", __func__); - /* loop if there are attributes and until we hit a NULL entry */ - while (sysfs_attrib && sysfs_attrib->attr.name) { - sysfs_remove_file(&mci->edac_mci_kobj, - (struct attribute *) sysfs_attrib); + /* + * loop if there are attributes and until we hit a NULL entry + * Remove first all the atributes + */ + while (sysfs_attrib) { + if (sysfs_attrib->grp) { + list_for_each_entry(grp_kobj, &mci->grp_kobj_list, + list) + if (grp_kobj->grp == sysfs_attrib->grp) + edac_remove_mci_instance_attributes(mci, + grp_kobj->grp->mcidev_attr, + &grp_kobj->kobj, count + 1); + } else if (sysfs_attrib->attr.name) { + debugf0("%s() file %s\n", __func__, + sysfs_attrib->attr.name); + sysfs_remove_file(kobj, &sysfs_attrib->attr); + } else + break; sysfs_attrib++; } + + /* + * Now that all attributes got removed, it is save to remove all groups + */ + if (!count) + list_for_each_entry_safe(grp_kobj, tmp, &mci->grp_kobj_list, + list) { + debugf0("%s() grp %s\n", __func__, grp_kobj->grp->name); + kobject_put(&grp_kobj->kobj); + } } @@ -794,6 +911,8 @@ int edac_create_sysfs_mci_device(struct mem_ctl_info *mci) debugf0("%s() idx=%d\n", __func__, mci->mc_idx); + INIT_LIST_HEAD(&mci->grp_kobj_list); + /* create a symlink for the device */ err = sysfs_create_link(kobj_mci, &mci->dev->kobj, EDAC_DEVICE_SYMLINK); @@ -806,7 +925,9 @@ int edac_create_sysfs_mci_device(struct mem_ctl_info *mci) * then create them now for the driver. */ if (mci->mc_driver_sysfs_attributes) { - err = edac_create_mci_instance_attributes(mci); + err = edac_create_mci_instance_attributes(mci, + mci->mc_driver_sysfs_attributes, + &mci->edac_mci_kobj); if (err) { debugf1("%s() failure to create mci attributes\n", __func__); @@ -841,7 +962,8 @@ int edac_create_sysfs_mci_device(struct mem_ctl_info *mci) } /* remove the mci instance's attributes, if any */ - edac_remove_mci_instance_attributes(mci); + edac_remove_mci_instance_attributes(mci, + mci->mc_driver_sysfs_attributes, &mci->edac_mci_kobj, 0); /* remove the symlink */ sysfs_remove_link(kobj_mci, EDAC_DEVICE_SYMLINK); @@ -875,8 +997,9 @@ void edac_remove_sysfs_mci_device(struct mem_ctl_info *mci) debugf0("%s() remove_mci_instance\n", __func__); /* remove this mci instance's attribtes */ - edac_remove_mci_instance_attributes(mci); - + edac_remove_mci_instance_attributes(mci, + mci->mc_driver_sysfs_attributes, + &mci->edac_mci_kobj, 0); debugf0("%s() unregister this mci kobj\n", __func__); /* unregister this instance's kobject */ diff --git a/drivers/edac/edac_mce.c b/drivers/edac/edac_mce.c new file mode 100644 index 0000000000000000000000000000000000000000..9ccdc5b140e775804a47c745022df5456d7acb5f --- /dev/null +++ b/drivers/edac/edac_mce.c @@ -0,0 +1,61 @@ +/* Provides edac interface to mcelog events + * + * This file may be distributed under the terms of the + * GNU General Public License version 2. + * + * Copyright (c) 2009 by: + * Mauro Carvalho Chehab + * + * Red Hat Inc. http://www.redhat.com + */ + +#include +#include +#include + +int edac_mce_enabled; +EXPORT_SYMBOL_GPL(edac_mce_enabled); + + +/* + * Extension interface + */ + +static LIST_HEAD(edac_mce_list); +static DEFINE_MUTEX(edac_mce_lock); + +int edac_mce_register(struct edac_mce *edac_mce) +{ + mutex_lock(&edac_mce_lock); + list_add_tail(&edac_mce->list, &edac_mce_list); + mutex_unlock(&edac_mce_lock); + return 0; +} +EXPORT_SYMBOL(edac_mce_register); + +void edac_mce_unregister(struct edac_mce *edac_mce) +{ + mutex_lock(&edac_mce_lock); + list_del(&edac_mce->list); + mutex_unlock(&edac_mce_lock); +} +EXPORT_SYMBOL(edac_mce_unregister); + +int edac_mce_parse(struct mce *mce) +{ + struct edac_mce *edac_mce; + + list_for_each_entry(edac_mce, &edac_mce_list, list) { + if (edac_mce->check_error(edac_mce->priv, mce)) + return 1; + } + + /* Nobody queued the error */ + return 0; +} +EXPORT_SYMBOL_GPL(edac_mce_parse); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab "); +MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com)"); +MODULE_DESCRIPTION("EDAC Driver for mcelog captured errors"); diff --git a/drivers/edac/i7core_edac.c b/drivers/edac/i7core_edac.c new file mode 100644 index 0000000000000000000000000000000000000000..6b8b7b41ec5f8bbad42647792417ce64f433d117 --- /dev/null +++ b/drivers/edac/i7core_edac.c @@ -0,0 +1,2078 @@ +/* Intel i7 core/Nehalem Memory Controller kernel module + * + * This driver supports yhe memory controllers found on the Intel + * processor families i7core, i7core 7xx/8xx, i5core, Xeon 35xx, + * Xeon 55xx and Xeon 56xx also known as Nehalem, Nehalem-EP, Lynnfield + * and Westmere-EP. + * + * This file may be distributed under the terms of the + * GNU General Public License version 2 only. + * + * Copyright (c) 2009-2010 by: + * Mauro Carvalho Chehab + * + * Red Hat Inc. http://www.redhat.com + * + * Forked and adapted from the i5400_edac driver + * + * Based on the following public Intel datasheets: + * Intel Core i7 Processor Extreme Edition and Intel Core i7 Processor + * Datasheet, Volume 2: + * http://download.intel.com/design/processor/datashts/320835.pdf + * Intel Xeon Processor 5500 Series Datasheet Volume 2 + * http://www.intel.com/Assets/PDF/datasheet/321322.pdf + * also available at: + * http://www.arrownac.com/manufacturers/intel/s/nehalem/5500-datasheet-v2.pdf + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "edac_core.h" + +/* + * This is used for Nehalem-EP and Nehalem-EX devices, where the non-core + * registers start at bus 255, and are not reported by BIOS. + * We currently find devices with only 2 sockets. In order to support more QPI + * Quick Path Interconnect, just increment this number. + */ +#define MAX_SOCKET_BUSES 2 + + +/* + * Alter this version for the module when modifications are made + */ +#define I7CORE_REVISION " Ver: 1.0.0 " __DATE__ +#define EDAC_MOD_STR "i7core_edac" + +/* + * Debug macros + */ +#define i7core_printk(level, fmt, arg...) \ + edac_printk(level, "i7core", fmt, ##arg) + +#define i7core_mc_printk(mci, level, fmt, arg...) \ + edac_mc_chipset_printk(mci, level, "i7core", fmt, ##arg) + +/* + * i7core Memory Controller Registers + */ + + /* OFFSETS for Device 0 Function 0 */ + +#define MC_CFG_CONTROL 0x90 + + /* OFFSETS for Device 3 Function 0 */ + +#define MC_CONTROL 0x48 +#define MC_STATUS 0x4c +#define MC_MAX_DOD 0x64 + +/* + * OFFSETS for Device 3 Function 4, as inicated on Xeon 5500 datasheet: + * http://www.arrownac.com/manufacturers/intel/s/nehalem/5500-datasheet-v2.pdf + */ + +#define MC_TEST_ERR_RCV1 0x60 + #define DIMM2_COR_ERR(r) ((r) & 0x7fff) + +#define MC_TEST_ERR_RCV0 0x64 + #define DIMM1_COR_ERR(r) (((r) >> 16) & 0x7fff) + #define DIMM0_COR_ERR(r) ((r) & 0x7fff) + +/* OFFSETS for Device 3 Function 2, as inicated on Xeon 5500 datasheet */ +#define MC_COR_ECC_CNT_0 0x80 +#define MC_COR_ECC_CNT_1 0x84 +#define MC_COR_ECC_CNT_2 0x88 +#define MC_COR_ECC_CNT_3 0x8c +#define MC_COR_ECC_CNT_4 0x90 +#define MC_COR_ECC_CNT_5 0x94 + +#define DIMM_TOP_COR_ERR(r) (((r) >> 16) & 0x7fff) +#define DIMM_BOT_COR_ERR(r) ((r) & 0x7fff) + + + /* OFFSETS for Devices 4,5 and 6 Function 0 */ + +#define MC_CHANNEL_DIMM_INIT_PARAMS 0x58 + #define THREE_DIMMS_PRESENT (1 << 24) + #define SINGLE_QUAD_RANK_PRESENT (1 << 23) + #define QUAD_RANK_PRESENT (1 << 22) + #define REGISTERED_DIMM (1 << 15) + +#define MC_CHANNEL_MAPPER 0x60 + #define RDLCH(r, ch) ((((r) >> (3 + (ch * 6))) & 0x07) - 1) + #define WRLCH(r, ch) ((((r) >> (ch * 6)) & 0x07) - 1) + +#define MC_CHANNEL_RANK_PRESENT 0x7c + #define RANK_PRESENT_MASK 0xffff + +#define MC_CHANNEL_ADDR_MATCH 0xf0 +#define MC_CHANNEL_ERROR_MASK 0xf8 +#define MC_CHANNEL_ERROR_INJECT 0xfc + #define INJECT_ADDR_PARITY 0x10 + #define INJECT_ECC 0x08 + #define MASK_CACHELINE 0x06 + #define MASK_FULL_CACHELINE 0x06 + #define MASK_MSB32_CACHELINE 0x04 + #define MASK_LSB32_CACHELINE 0x02 + #define NO_MASK_CACHELINE 0x00 + #define REPEAT_EN 0x01 + + /* OFFSETS for Devices 4,5 and 6 Function 1 */ + +#define MC_DOD_CH_DIMM0 0x48 +#define MC_DOD_CH_DIMM1 0x4c +#define MC_DOD_CH_DIMM2 0x50 + #define RANKOFFSET_MASK ((1 << 12) | (1 << 11) | (1 << 10)) + #define RANKOFFSET(x) ((x & RANKOFFSET_MASK) >> 10) + #define DIMM_PRESENT_MASK (1 << 9) + #define DIMM_PRESENT(x) (((x) & DIMM_PRESENT_MASK) >> 9) + #define MC_DOD_NUMBANK_MASK ((1 << 8) | (1 << 7)) + #define MC_DOD_NUMBANK(x) (((x) & MC_DOD_NUMBANK_MASK) >> 7) + #define MC_DOD_NUMRANK_MASK ((1 << 6) | (1 << 5)) + #define MC_DOD_NUMRANK(x) (((x) & MC_DOD_NUMRANK_MASK) >> 5) + #define MC_DOD_NUMROW_MASK ((1 << 4) | (1 << 3) | (1 << 2)) + #define MC_DOD_NUMROW(x) (((x) & MC_DOD_NUMROW_MASK) >> 2) + #define MC_DOD_NUMCOL_MASK 3 + #define MC_DOD_NUMCOL(x) ((x) & MC_DOD_NUMCOL_MASK) + +#define MC_RANK_PRESENT 0x7c + +#define MC_SAG_CH_0 0x80 +#define MC_SAG_CH_1 0x84 +#define MC_SAG_CH_2 0x88 +#define MC_SAG_CH_3 0x8c +#define MC_SAG_CH_4 0x90 +#define MC_SAG_CH_5 0x94 +#define MC_SAG_CH_6 0x98 +#define MC_SAG_CH_7 0x9c + +#define MC_RIR_LIMIT_CH_0 0x40 +#define MC_RIR_LIMIT_CH_1 0x44 +#define MC_RIR_LIMIT_CH_2 0x48 +#define MC_RIR_LIMIT_CH_3 0x4C +#define MC_RIR_LIMIT_CH_4 0x50 +#define MC_RIR_LIMIT_CH_5 0x54 +#define MC_RIR_LIMIT_CH_6 0x58 +#define MC_RIR_LIMIT_CH_7 0x5C +#define MC_RIR_LIMIT_MASK ((1 << 10) - 1) + +#define MC_RIR_WAY_CH 0x80 + #define MC_RIR_WAY_OFFSET_MASK (((1 << 14) - 1) & ~0x7) + #define MC_RIR_WAY_RANK_MASK 0x7 + +/* + * i7core structs + */ + +#define NUM_CHANS 3 +#define MAX_DIMMS 3 /* Max DIMMS per channel */ +#define MAX_MCR_FUNC 4 +#define MAX_CHAN_FUNC 3 + +struct i7core_info { + u32 mc_control; + u32 mc_status; + u32 max_dod; + u32 ch_map; +}; + + +struct i7core_inject { + int enable; + + u32 section; + u32 type; + u32 eccmask; + + /* Error address mask */ + int channel, dimm, rank, bank, page, col; +}; + +struct i7core_channel { + u32 ranks; + u32 dimms; +}; + +struct pci_id_descr { + int dev; + int func; + int dev_id; + int optional; +}; + +struct pci_id_table { + struct pci_id_descr *descr; + int n_devs; +}; + +struct i7core_dev { + struct list_head list; + u8 socket; + struct pci_dev **pdev; + int n_devs; + struct mem_ctl_info *mci; +}; + +struct i7core_pvt { + struct pci_dev *pci_noncore; + struct pci_dev *pci_mcr[MAX_MCR_FUNC + 1]; + struct pci_dev *pci_ch[NUM_CHANS][MAX_CHAN_FUNC + 1]; + + struct i7core_dev *i7core_dev; + + struct i7core_info info; + struct i7core_inject inject; + struct i7core_channel channel[NUM_CHANS]; + + int channels; /* Number of active channels */ + + int ce_count_available; + int csrow_map[NUM_CHANS][MAX_DIMMS]; + + /* ECC corrected errors counts per udimm */ + unsigned long udimm_ce_count[MAX_DIMMS]; + int udimm_last_ce_count[MAX_DIMMS]; + /* ECC corrected errors counts per rdimm */ + unsigned long rdimm_ce_count[NUM_CHANS][MAX_DIMMS]; + int rdimm_last_ce_count[NUM_CHANS][MAX_DIMMS]; + + unsigned int is_registered; + + /* mcelog glue */ + struct edac_mce edac_mce; + + /* Fifo double buffers */ + struct mce mce_entry[MCE_LOG_LEN]; + struct mce mce_outentry[MCE_LOG_LEN]; + + /* Fifo in/out counters */ + unsigned mce_in, mce_out; + + /* Count indicator to show errors not got */ + unsigned mce_overrun; +}; + +/* Static vars */ +static LIST_HEAD(i7core_edac_list); +static DEFINE_MUTEX(i7core_edac_lock); + +#define PCI_DESCR(device, function, device_id) \ + .dev = (device), \ + .func = (function), \ + .dev_id = (device_id) + +struct pci_id_descr pci_dev_descr_i7core_nehalem[] = { + /* Memory controller */ + { PCI_DESCR(3, 0, PCI_DEVICE_ID_INTEL_I7_MCR) }, + { PCI_DESCR(3, 1, PCI_DEVICE_ID_INTEL_I7_MC_TAD) }, + /* Exists only for RDIMM */ + { PCI_DESCR(3, 2, PCI_DEVICE_ID_INTEL_I7_MC_RAS), .optional = 1 }, + { PCI_DESCR(3, 4, PCI_DEVICE_ID_INTEL_I7_MC_TEST) }, + + /* Channel 0 */ + { PCI_DESCR(4, 0, PCI_DEVICE_ID_INTEL_I7_MC_CH0_CTRL) }, + { PCI_DESCR(4, 1, PCI_DEVICE_ID_INTEL_I7_MC_CH0_ADDR) }, + { PCI_DESCR(4, 2, PCI_DEVICE_ID_INTEL_I7_MC_CH0_RANK) }, + { PCI_DESCR(4, 3, PCI_DEVICE_ID_INTEL_I7_MC_CH0_TC) }, + + /* Channel 1 */ + { PCI_DESCR(5, 0, PCI_DEVICE_ID_INTEL_I7_MC_CH1_CTRL) }, + { PCI_DESCR(5, 1, PCI_DEVICE_ID_INTEL_I7_MC_CH1_ADDR) }, + { PCI_DESCR(5, 2, PCI_DEVICE_ID_INTEL_I7_MC_CH1_RANK) }, + { PCI_DESCR(5, 3, PCI_DEVICE_ID_INTEL_I7_MC_CH1_TC) }, + + /* Channel 2 */ + { PCI_DESCR(6, 0, PCI_DEVICE_ID_INTEL_I7_MC_CH2_CTRL) }, + { PCI_DESCR(6, 1, PCI_DEVICE_ID_INTEL_I7_MC_CH2_ADDR) }, + { PCI_DESCR(6, 2, PCI_DEVICE_ID_INTEL_I7_MC_CH2_RANK) }, + { PCI_DESCR(6, 3, PCI_DEVICE_ID_INTEL_I7_MC_CH2_TC) }, + + /* Generic Non-core registers */ + /* + * This is the PCI device on i7core and on Xeon 35xx (8086:2c41) + * On Xeon 55xx, however, it has a different id (8086:2c40). So, + * the probing code needs to test for the other address in case of + * failure of this one + */ + { PCI_DESCR(0, 0, PCI_DEVICE_ID_INTEL_I7_NONCORE) }, + +}; + +struct pci_id_descr pci_dev_descr_lynnfield[] = { + { PCI_DESCR( 3, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MCR) }, + { PCI_DESCR( 3, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TAD) }, + { PCI_DESCR( 3, 4, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TEST) }, + + { PCI_DESCR( 4, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_CTRL) }, + { PCI_DESCR( 4, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_ADDR) }, + { PCI_DESCR( 4, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_RANK) }, + { PCI_DESCR( 4, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_TC) }, + + { PCI_DESCR( 5, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_CTRL) }, + { PCI_DESCR( 5, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_ADDR) }, + { PCI_DESCR( 5, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_RANK) }, + { PCI_DESCR( 5, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_TC) }, + + /* + * This is the PCI device has an alternate address on some + * processors like Core i7 860 + */ + { PCI_DESCR( 0, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE) }, +}; + +struct pci_id_descr pci_dev_descr_i7core_westmere[] = { + /* Memory controller */ + { PCI_DESCR(3, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MCR_REV2) }, + { PCI_DESCR(3, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TAD_REV2) }, + /* Exists only for RDIMM */ + { PCI_DESCR(3, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_RAS_REV2), .optional = 1 }, + { PCI_DESCR(3, 4, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TEST_REV2) }, + + /* Channel 0 */ + { PCI_DESCR(4, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_CTRL_REV2) }, + { PCI_DESCR(4, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_ADDR_REV2) }, + { PCI_DESCR(4, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_RANK_REV2) }, + { PCI_DESCR(4, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_TC_REV2) }, + + /* Channel 1 */ + { PCI_DESCR(5, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_CTRL_REV2) }, + { PCI_DESCR(5, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_ADDR_REV2) }, + { PCI_DESCR(5, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_RANK_REV2) }, + { PCI_DESCR(5, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_TC_REV2) }, + + /* Channel 2 */ + { PCI_DESCR(6, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_CTRL_REV2) }, + { PCI_DESCR(6, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_ADDR_REV2) }, + { PCI_DESCR(6, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_RANK_REV2) }, + { PCI_DESCR(6, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_TC_REV2) }, + + /* Generic Non-core registers */ + { PCI_DESCR(0, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_REV2) }, + +}; + +#define PCI_ID_TABLE_ENTRY(A) { A, ARRAY_SIZE(A) } +struct pci_id_table pci_dev_table[] = { + PCI_ID_TABLE_ENTRY(pci_dev_descr_i7core_nehalem), + PCI_ID_TABLE_ENTRY(pci_dev_descr_lynnfield), + PCI_ID_TABLE_ENTRY(pci_dev_descr_i7core_westmere), +}; + +/* + * pci_device_id table for which devices we are looking for + */ +static const struct pci_device_id i7core_pci_tbl[] __devinitdata = { + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_X58_HUB_MGMT)}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNNFIELD_QPI_LINK0)}, + {0,} /* 0 terminated list. */ +}; + +static struct edac_pci_ctl_info *i7core_pci; + +/**************************************************************************** + Anciliary status routines + ****************************************************************************/ + + /* MC_CONTROL bits */ +#define CH_ACTIVE(pvt, ch) ((pvt)->info.mc_control & (1 << (8 + ch))) +#define ECCx8(pvt) ((pvt)->info.mc_control & (1 << 1)) + + /* MC_STATUS bits */ +#define ECC_ENABLED(pvt) ((pvt)->info.mc_status & (1 << 4)) +#define CH_DISABLED(pvt, ch) ((pvt)->info.mc_status & (1 << ch)) + + /* MC_MAX_DOD read functions */ +static inline int numdimms(u32 dimms) +{ + return (dimms & 0x3) + 1; +} + +static inline int numrank(u32 rank) +{ + static int ranks[4] = { 1, 2, 4, -EINVAL }; + + return ranks[rank & 0x3]; +} + +static inline int numbank(u32 bank) +{ + static int banks[4] = { 4, 8, 16, -EINVAL }; + + return banks[bank & 0x3]; +} + +static inline int numrow(u32 row) +{ + static int rows[8] = { + 1 << 12, 1 << 13, 1 << 14, 1 << 15, + 1 << 16, -EINVAL, -EINVAL, -EINVAL, + }; + + return rows[row & 0x7]; +} + +static inline int numcol(u32 col) +{ + static int cols[8] = { + 1 << 10, 1 << 11, 1 << 12, -EINVAL, + }; + return cols[col & 0x3]; +} + +static struct i7core_dev *get_i7core_dev(u8 socket) +{ + struct i7core_dev *i7core_dev; + + list_for_each_entry(i7core_dev, &i7core_edac_list, list) { + if (i7core_dev->socket == socket) + return i7core_dev; + } + + return NULL; +} + +/**************************************************************************** + Memory check routines + ****************************************************************************/ +static struct pci_dev *get_pdev_slot_func(u8 socket, unsigned slot, + unsigned func) +{ + struct i7core_dev *i7core_dev = get_i7core_dev(socket); + int i; + + if (!i7core_dev) + return NULL; + + for (i = 0; i < i7core_dev->n_devs; i++) { + if (!i7core_dev->pdev[i]) + continue; + + if (PCI_SLOT(i7core_dev->pdev[i]->devfn) == slot && + PCI_FUNC(i7core_dev->pdev[i]->devfn) == func) { + return i7core_dev->pdev[i]; + } + } + + return NULL; +} + +/** + * i7core_get_active_channels() - gets the number of channels and csrows + * @socket: Quick Path Interconnect socket + * @channels: Number of channels that will be returned + * @csrows: Number of csrows found + * + * Since EDAC core needs to know in advance the number of available channels + * and csrows, in order to allocate memory for csrows/channels, it is needed + * to run two similar steps. At the first step, implemented on this function, + * it checks the number of csrows/channels present at one socket. + * this is used in order to properly allocate the size of mci components. + * + * It should be noticed that none of the current available datasheets explain + * or even mention how csrows are seen by the memory controller. So, we need + * to add a fake description for csrows. + * So, this driver is attributing one DIMM memory for one csrow. + */ +static int i7core_get_active_channels(u8 socket, unsigned *channels, + unsigned *csrows) +{ + struct pci_dev *pdev = NULL; + int i, j; + u32 status, control; + + *channels = 0; + *csrows = 0; + + pdev = get_pdev_slot_func(socket, 3, 0); + if (!pdev) { + i7core_printk(KERN_ERR, "Couldn't find socket %d fn 3.0!!!\n", + socket); + return -ENODEV; + } + + /* Device 3 function 0 reads */ + pci_read_config_dword(pdev, MC_STATUS, &status); + pci_read_config_dword(pdev, MC_CONTROL, &control); + + for (i = 0; i < NUM_CHANS; i++) { + u32 dimm_dod[3]; + /* Check if the channel is active */ + if (!(control & (1 << (8 + i)))) + continue; + + /* Check if the channel is disabled */ + if (status & (1 << i)) + continue; + + pdev = get_pdev_slot_func(socket, i + 4, 1); + if (!pdev) { + i7core_printk(KERN_ERR, "Couldn't find socket %d " + "fn %d.%d!!!\n", + socket, i + 4, 1); + return -ENODEV; + } + /* Devices 4-6 function 1 */ + pci_read_config_dword(pdev, + MC_DOD_CH_DIMM0, &dimm_dod[0]); + pci_read_config_dword(pdev, + MC_DOD_CH_DIMM1, &dimm_dod[1]); + pci_read_config_dword(pdev, + MC_DOD_CH_DIMM2, &dimm_dod[2]); + + (*channels)++; + + for (j = 0; j < 3; j++) { + if (!DIMM_PRESENT(dimm_dod[j])) + continue; + (*csrows)++; + } + } + + debugf0("Number of active channels on socket %d: %d\n", + socket, *channels); + + return 0; +} + +static int get_dimm_config(struct mem_ctl_info *mci, int *csrow) +{ + struct i7core_pvt *pvt = mci->pvt_info; + struct csrow_info *csr; + struct pci_dev *pdev; + int i, j; + unsigned long last_page = 0; + enum edac_type mode; + enum mem_type mtype; + + /* Get data from the MC register, function 0 */ + pdev = pvt->pci_mcr[0]; + if (!pdev) + return -ENODEV; + + /* Device 3 function 0 reads */ + pci_read_config_dword(pdev, MC_CONTROL, &pvt->info.mc_control); + pci_read_config_dword(pdev, MC_STATUS, &pvt->info.mc_status); + pci_read_config_dword(pdev, MC_MAX_DOD, &pvt->info.max_dod); + pci_read_config_dword(pdev, MC_CHANNEL_MAPPER, &pvt->info.ch_map); + + debugf0("QPI %d control=0x%08x status=0x%08x dod=0x%08x map=0x%08x\n", + pvt->i7core_dev->socket, pvt->info.mc_control, pvt->info.mc_status, + pvt->info.max_dod, pvt->info.ch_map); + + if (ECC_ENABLED(pvt)) { + debugf0("ECC enabled with x%d SDCC\n", ECCx8(pvt) ? 8 : 4); + if (ECCx8(pvt)) + mode = EDAC_S8ECD8ED; + else + mode = EDAC_S4ECD4ED; + } else { + debugf0("ECC disabled\n"); + mode = EDAC_NONE; + } + + /* FIXME: need to handle the error codes */ + debugf0("DOD Max limits: DIMMS: %d, %d-ranked, %d-banked " + "x%x x 0x%x\n", + numdimms(pvt->info.max_dod), + numrank(pvt->info.max_dod >> 2), + numbank(pvt->info.max_dod >> 4), + numrow(pvt->info.max_dod >> 6), + numcol(pvt->info.max_dod >> 9)); + + for (i = 0; i < NUM_CHANS; i++) { + u32 data, dimm_dod[3], value[8]; + + if (!pvt->pci_ch[i][0]) + continue; + + if (!CH_ACTIVE(pvt, i)) { + debugf0("Channel %i is not active\n", i); + continue; + } + if (CH_DISABLED(pvt, i)) { + debugf0("Channel %i is disabled\n", i); + continue; + } + + /* Devices 4-6 function 0 */ + pci_read_config_dword(pvt->pci_ch[i][0], + MC_CHANNEL_DIMM_INIT_PARAMS, &data); + + pvt->channel[i].ranks = (data & QUAD_RANK_PRESENT) ? + 4 : 2; + + if (data & REGISTERED_DIMM) + mtype = MEM_RDDR3; + else + mtype = MEM_DDR3; +#if 0 + if (data & THREE_DIMMS_PRESENT) + pvt->channel[i].dimms = 3; + else if (data & SINGLE_QUAD_RANK_PRESENT) + pvt->channel[i].dimms = 1; + else + pvt->channel[i].dimms = 2; +#endif + + /* Devices 4-6 function 1 */ + pci_read_config_dword(pvt->pci_ch[i][1], + MC_DOD_CH_DIMM0, &dimm_dod[0]); + pci_read_config_dword(pvt->pci_ch[i][1], + MC_DOD_CH_DIMM1, &dimm_dod[1]); + pci_read_config_dword(pvt->pci_ch[i][1], + MC_DOD_CH_DIMM2, &dimm_dod[2]); + + debugf0("Ch%d phy rd%d, wr%d (0x%08x): " + "%d ranks, %cDIMMs\n", + i, + RDLCH(pvt->info.ch_map, i), WRLCH(pvt->info.ch_map, i), + data, + pvt->channel[i].ranks, + (data & REGISTERED_DIMM) ? 'R' : 'U'); + + for (j = 0; j < 3; j++) { + u32 banks, ranks, rows, cols; + u32 size, npages; + + if (!DIMM_PRESENT(dimm_dod[j])) + continue; + + banks = numbank(MC_DOD_NUMBANK(dimm_dod[j])); + ranks = numrank(MC_DOD_NUMRANK(dimm_dod[j])); + rows = numrow(MC_DOD_NUMROW(dimm_dod[j])); + cols = numcol(MC_DOD_NUMCOL(dimm_dod[j])); + + /* DDR3 has 8 I/O banks */ + size = (rows * cols * banks * ranks) >> (20 - 3); + + pvt->channel[i].dimms++; + + debugf0("\tdimm %d %d Mb offset: %x, " + "bank: %d, rank: %d, row: %#x, col: %#x\n", + j, size, + RANKOFFSET(dimm_dod[j]), + banks, ranks, rows, cols); + +#if PAGE_SHIFT > 20 + npages = size >> (PAGE_SHIFT - 20); +#else + npages = size << (20 - PAGE_SHIFT); +#endif + + csr = &mci->csrows[*csrow]; + csr->first_page = last_page + 1; + last_page += npages; + csr->last_page = last_page; + csr->nr_pages = npages; + + csr->page_mask = 0; + csr->grain = 8; + csr->csrow_idx = *csrow; + csr->nr_channels = 1; + + csr->channels[0].chan_idx = i; + csr->channels[0].ce_count = 0; + + pvt->csrow_map[i][j] = *csrow; + + switch (banks) { + case 4: + csr->dtype = DEV_X4; + break; + case 8: + csr->dtype = DEV_X8; + break; + case 16: + csr->dtype = DEV_X16; + break; + default: + csr->dtype = DEV_UNKNOWN; + } + + csr->edac_mode = mode; + csr->mtype = mtype; + + (*csrow)++; + } + + pci_read_config_dword(pdev, MC_SAG_CH_0, &value[0]); + pci_read_config_dword(pdev, MC_SAG_CH_1, &value[1]); + pci_read_config_dword(pdev, MC_SAG_CH_2, &value[2]); + pci_read_config_dword(pdev, MC_SAG_CH_3, &value[3]); + pci_read_config_dword(pdev, MC_SAG_CH_4, &value[4]); + pci_read_config_dword(pdev, MC_SAG_CH_5, &value[5]); + pci_read_config_dword(pdev, MC_SAG_CH_6, &value[6]); + pci_read_config_dword(pdev, MC_SAG_CH_7, &value[7]); + debugf1("\t[%i] DIVBY3\tREMOVED\tOFFSET\n", i); + for (j = 0; j < 8; j++) + debugf1("\t\t%#x\t%#x\t%#x\n", + (value[j] >> 27) & 0x1, + (value[j] >> 24) & 0x7, + (value[j] && ((1 << 24) - 1))); + } + + return 0; +} + +/**************************************************************************** + Error insertion routines + ****************************************************************************/ + +/* The i7core has independent error injection features per channel. + However, to have a simpler code, we don't allow enabling error injection + on more than one channel. + Also, since a change at an inject parameter will be applied only at enable, + we're disabling error injection on all write calls to the sysfs nodes that + controls the error code injection. + */ +static int disable_inject(struct mem_ctl_info *mci) +{ + struct i7core_pvt *pvt = mci->pvt_info; + + pvt->inject.enable = 0; + + if (!pvt->pci_ch[pvt->inject.channel][0]) + return -ENODEV; + + pci_write_config_dword(pvt->pci_ch[pvt->inject.channel][0], + MC_CHANNEL_ERROR_INJECT, 0); + + return 0; +} + +/* + * i7core inject inject.section + * + * accept and store error injection inject.section value + * bit 0 - refers to the lower 32-byte half cacheline + * bit 1 - refers to the upper 32-byte half cacheline + */ +static ssize_t i7core_inject_section_store(struct mem_ctl_info *mci, + const char *data, size_t count) +{ + struct i7core_pvt *pvt = mci->pvt_info; + unsigned long value; + int rc; + + if (pvt->inject.enable) + disable_inject(mci); + + rc = strict_strtoul(data, 10, &value); + if ((rc < 0) || (value > 3)) + return -EIO; + + pvt->inject.section = (u32) value; + return count; +} + +static ssize_t i7core_inject_section_show(struct mem_ctl_info *mci, + char *data) +{ + struct i7core_pvt *pvt = mci->pvt_info; + return sprintf(data, "0x%08x\n", pvt->inject.section); +} + +/* + * i7core inject.type + * + * accept and store error injection inject.section value + * bit 0 - repeat enable - Enable error repetition + * bit 1 - inject ECC error + * bit 2 - inject parity error + */ +static ssize_t i7core_inject_type_store(struct mem_ctl_info *mci, + const char *data, size_t count) +{ + struct i7core_pvt *pvt = mci->pvt_info; + unsigned long value; + int rc; + + if (pvt->inject.enable) + disable_inject(mci); + + rc = strict_strtoul(data, 10, &value); + if ((rc < 0) || (value > 7)) + return -EIO; + + pvt->inject.type = (u32) value; + return count; +} + +static ssize_t i7core_inject_type_show(struct mem_ctl_info *mci, + char *data) +{ + struct i7core_pvt *pvt = mci->pvt_info; + return sprintf(data, "0x%08x\n", pvt->inject.type); +} + +/* + * i7core_inject_inject.eccmask_store + * + * The type of error (UE/CE) will depend on the inject.eccmask value: + * Any bits set to a 1 will flip the corresponding ECC bit + * Correctable errors can be injected by flipping 1 bit or the bits within + * a symbol pair (2 consecutive aligned 8-bit pairs - i.e. 7:0 and 15:8 or + * 23:16 and 31:24). Flipping bits in two symbol pairs will cause an + * uncorrectable error to be injected. + */ +static ssize_t i7core_inject_eccmask_store(struct mem_ctl_info *mci, + const char *data, size_t count) +{ + struct i7core_pvt *pvt = mci->pvt_info; + unsigned long value; + int rc; + + if (pvt->inject.enable) + disable_inject(mci); + + rc = strict_strtoul(data, 10, &value); + if (rc < 0) + return -EIO; + + pvt->inject.eccmask = (u32) value; + return count; +} + +static ssize_t i7core_inject_eccmask_show(struct mem_ctl_info *mci, + char *data) +{ + struct i7core_pvt *pvt = mci->pvt_info; + return sprintf(data, "0x%08x\n", pvt->inject.eccmask); +} + +/* + * i7core_addrmatch + * + * The type of error (UE/CE) will depend on the inject.eccmask value: + * Any bits set to a 1 will flip the corresponding ECC bit + * Correctable errors can be injected by flipping 1 bit or the bits within + * a symbol pair (2 consecutive aligned 8-bit pairs - i.e. 7:0 and 15:8 or + * 23:16 and 31:24). Flipping bits in two symbol pairs will cause an + * uncorrectable error to be injected. + */ + +#define DECLARE_ADDR_MATCH(param, limit) \ +static ssize_t i7core_inject_store_##param( \ + struct mem_ctl_info *mci, \ + const char *data, size_t count) \ +{ \ + struct i7core_pvt *pvt; \ + long value; \ + int rc; \ + \ + debugf1("%s()\n", __func__); \ + pvt = mci->pvt_info; \ + \ + if (pvt->inject.enable) \ + disable_inject(mci); \ + \ + if (!strcasecmp(data, "any") || !strcasecmp(data, "any\n"))\ + value = -1; \ + else { \ + rc = strict_strtoul(data, 10, &value); \ + if ((rc < 0) || (value >= limit)) \ + return -EIO; \ + } \ + \ + pvt->inject.param = value; \ + \ + return count; \ +} \ + \ +static ssize_t i7core_inject_show_##param( \ + struct mem_ctl_info *mci, \ + char *data) \ +{ \ + struct i7core_pvt *pvt; \ + \ + pvt = mci->pvt_info; \ + debugf1("%s() pvt=%p\n", __func__, pvt); \ + if (pvt->inject.param < 0) \ + return sprintf(data, "any\n"); \ + else \ + return sprintf(data, "%d\n", pvt->inject.param);\ +} + +#define ATTR_ADDR_MATCH(param) \ + { \ + .attr = { \ + .name = #param, \ + .mode = (S_IRUGO | S_IWUSR) \ + }, \ + .show = i7core_inject_show_##param, \ + .store = i7core_inject_store_##param, \ + } + +DECLARE_ADDR_MATCH(channel, 3); +DECLARE_ADDR_MATCH(dimm, 3); +DECLARE_ADDR_MATCH(rank, 4); +DECLARE_ADDR_MATCH(bank, 32); +DECLARE_ADDR_MATCH(page, 0x10000); +DECLARE_ADDR_MATCH(col, 0x4000); + +static int write_and_test(struct pci_dev *dev, int where, u32 val) +{ + u32 read; + int count; + + debugf0("setting pci %02x:%02x.%x reg=%02x value=%08x\n", + dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn), + where, val); + + for (count = 0; count < 10; count++) { + if (count) + msleep(100); + pci_write_config_dword(dev, where, val); + pci_read_config_dword(dev, where, &read); + + if (read == val) + return 0; + } + + i7core_printk(KERN_ERR, "Error during set pci %02x:%02x.%x reg=%02x " + "write=%08x. Read=%08x\n", + dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn), + where, val, read); + + return -EINVAL; +} + +/* + * This routine prepares the Memory Controller for error injection. + * The error will be injected when some process tries to write to the + * memory that matches the given criteria. + * The criteria can be set in terms of a mask where dimm, rank, bank, page + * and col can be specified. + * A -1 value for any of the mask items will make the MCU to ignore + * that matching criteria for error injection. + * + * It should be noticed that the error will only happen after a write operation + * on a memory that matches the condition. if REPEAT_EN is not enabled at + * inject mask, then it will produce just one error. Otherwise, it will repeat + * until the injectmask would be cleaned. + * + * FIXME: This routine assumes that MAXNUMDIMMS value of MC_MAX_DOD + * is reliable enough to check if the MC is using the + * three channels. However, this is not clear at the datasheet. + */ +static ssize_t i7core_inject_enable_store(struct mem_ctl_info *mci, + const char *data, size_t count) +{ + struct i7core_pvt *pvt = mci->pvt_info; + u32 injectmask; + u64 mask = 0; + int rc; + long enable; + + if (!pvt->pci_ch[pvt->inject.channel][0]) + return 0; + + rc = strict_strtoul(data, 10, &enable); + if ((rc < 0)) + return 0; + + if (enable) { + pvt->inject.enable = 1; + } else { + disable_inject(mci); + return count; + } + + /* Sets pvt->inject.dimm mask */ + if (pvt->inject.dimm < 0) + mask |= 1LL << 41; + else { + if (pvt->channel[pvt->inject.channel].dimms > 2) + mask |= (pvt->inject.dimm & 0x3LL) << 35; + else + mask |= (pvt->inject.dimm & 0x1LL) << 36; + } + + /* Sets pvt->inject.rank mask */ + if (pvt->inject.rank < 0) + mask |= 1LL << 40; + else { + if (pvt->channel[pvt->inject.channel].dimms > 2) + mask |= (pvt->inject.rank & 0x1LL) << 34; + else + mask |= (pvt->inject.rank & 0x3LL) << 34; + } + + /* Sets pvt->inject.bank mask */ + if (pvt->inject.bank < 0) + mask |= 1LL << 39; + else + mask |= (pvt->inject.bank & 0x15LL) << 30; + + /* Sets pvt->inject.page mask */ + if (pvt->inject.page < 0) + mask |= 1LL << 38; + else + mask |= (pvt->inject.page & 0xffff) << 14; + + /* Sets pvt->inject.column mask */ + if (pvt->inject.col < 0) + mask |= 1LL << 37; + else + mask |= (pvt->inject.col & 0x3fff); + + /* + * bit 0: REPEAT_EN + * bits 1-2: MASK_HALF_CACHELINE + * bit 3: INJECT_ECC + * bit 4: INJECT_ADDR_PARITY + */ + + injectmask = (pvt->inject.type & 1) | + (pvt->inject.section & 0x3) << 1 | + (pvt->inject.type & 0x6) << (3 - 1); + + /* Unlock writes to registers - this register is write only */ + pci_write_config_dword(pvt->pci_noncore, + MC_CFG_CONTROL, 0x2); + + write_and_test(pvt->pci_ch[pvt->inject.channel][0], + MC_CHANNEL_ADDR_MATCH, mask); + write_and_test(pvt->pci_ch[pvt->inject.channel][0], + MC_CHANNEL_ADDR_MATCH + 4, mask >> 32L); + + write_and_test(pvt->pci_ch[pvt->inject.channel][0], + MC_CHANNEL_ERROR_MASK, pvt->inject.eccmask); + + write_and_test(pvt->pci_ch[pvt->inject.channel][0], + MC_CHANNEL_ERROR_INJECT, injectmask); + + /* + * This is something undocumented, based on my tests + * Without writing 8 to this register, errors aren't injected. Not sure + * why. + */ + pci_write_config_dword(pvt->pci_noncore, + MC_CFG_CONTROL, 8); + + debugf0("Error inject addr match 0x%016llx, ecc 0x%08x," + " inject 0x%08x\n", + mask, pvt->inject.eccmask, injectmask); + + + return count; +} + +static ssize_t i7core_inject_enable_show(struct mem_ctl_info *mci, + char *data) +{ + struct i7core_pvt *pvt = mci->pvt_info; + u32 injectmask; + + if (!pvt->pci_ch[pvt->inject.channel][0]) + return 0; + + pci_read_config_dword(pvt->pci_ch[pvt->inject.channel][0], + MC_CHANNEL_ERROR_INJECT, &injectmask); + + debugf0("Inject error read: 0x%018x\n", injectmask); + + if (injectmask & 0x0c) + pvt->inject.enable = 1; + + return sprintf(data, "%d\n", pvt->inject.enable); +} + +#define DECLARE_COUNTER(param) \ +static ssize_t i7core_show_counter_##param( \ + struct mem_ctl_info *mci, \ + char *data) \ +{ \ + struct i7core_pvt *pvt = mci->pvt_info; \ + \ + debugf1("%s() \n", __func__); \ + if (!pvt->ce_count_available || (pvt->is_registered)) \ + return sprintf(data, "data unavailable\n"); \ + return sprintf(data, "%lu\n", \ + pvt->udimm_ce_count[param]); \ +} + +#define ATTR_COUNTER(param) \ + { \ + .attr = { \ + .name = __stringify(udimm##param), \ + .mode = (S_IRUGO | S_IWUSR) \ + }, \ + .show = i7core_show_counter_##param \ + } + +DECLARE_COUNTER(0); +DECLARE_COUNTER(1); +DECLARE_COUNTER(2); + +/* + * Sysfs struct + */ + + +static struct mcidev_sysfs_attribute i7core_addrmatch_attrs[] = { + ATTR_ADDR_MATCH(channel), + ATTR_ADDR_MATCH(dimm), + ATTR_ADDR_MATCH(rank), + ATTR_ADDR_MATCH(bank), + ATTR_ADDR_MATCH(page), + ATTR_ADDR_MATCH(col), + { .attr = { .name = NULL } } +}; + +static struct mcidev_sysfs_group i7core_inject_addrmatch = { + .name = "inject_addrmatch", + .mcidev_attr = i7core_addrmatch_attrs, +}; + +static struct mcidev_sysfs_attribute i7core_udimm_counters_attrs[] = { + ATTR_COUNTER(0), + ATTR_COUNTER(1), + ATTR_COUNTER(2), +}; + +static struct mcidev_sysfs_group i7core_udimm_counters = { + .name = "all_channel_counts", + .mcidev_attr = i7core_udimm_counters_attrs, +}; + +static struct mcidev_sysfs_attribute i7core_sysfs_attrs[] = { + { + .attr = { + .name = "inject_section", + .mode = (S_IRUGO | S_IWUSR) + }, + .show = i7core_inject_section_show, + .store = i7core_inject_section_store, + }, { + .attr = { + .name = "inject_type", + .mode = (S_IRUGO | S_IWUSR) + }, + .show = i7core_inject_type_show, + .store = i7core_inject_type_store, + }, { + .attr = { + .name = "inject_eccmask", + .mode = (S_IRUGO | S_IWUSR) + }, + .show = i7core_inject_eccmask_show, + .store = i7core_inject_eccmask_store, + }, { + .grp = &i7core_inject_addrmatch, + }, { + .attr = { + .name = "inject_enable", + .mode = (S_IRUGO | S_IWUSR) + }, + .show = i7core_inject_enable_show, + .store = i7core_inject_enable_store, + }, + { .attr = { .name = NULL } }, /* Reserved for udimm counters */ + { .attr = { .name = NULL } } +}; + +/**************************************************************************** + Device initialization routines: put/get, init/exit + ****************************************************************************/ + +/* + * i7core_put_devices 'put' all the devices that we have + * reserved via 'get' + */ +static void i7core_put_devices(struct i7core_dev *i7core_dev) +{ + int i; + + debugf0(__FILE__ ": %s()\n", __func__); + for (i = 0; i < i7core_dev->n_devs; i++) { + struct pci_dev *pdev = i7core_dev->pdev[i]; + if (!pdev) + continue; + debugf0("Removing dev %02x:%02x.%d\n", + pdev->bus->number, + PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn)); + pci_dev_put(pdev); + } + kfree(i7core_dev->pdev); + list_del(&i7core_dev->list); + kfree(i7core_dev); +} + +static void i7core_put_all_devices(void) +{ + struct i7core_dev *i7core_dev, *tmp; + + list_for_each_entry_safe(i7core_dev, tmp, &i7core_edac_list, list) + i7core_put_devices(i7core_dev); +} + +static void __init i7core_xeon_pci_fixup(struct pci_id_table *table) +{ + struct pci_dev *pdev = NULL; + int i; + /* + * On Xeon 55xx, the Intel Quckpath Arch Generic Non-core pci buses + * aren't announced by acpi. So, we need to use a legacy scan probing + * to detect them + */ + while (table && table->descr) { + pdev = pci_get_device(PCI_VENDOR_ID_INTEL, table->descr[0].dev_id, NULL); + if (unlikely(!pdev)) { + for (i = 0; i < MAX_SOCKET_BUSES; i++) + pcibios_scan_specific_bus(255-i); + } + table++; + } +} + +/* + * i7core_get_devices Find and perform 'get' operation on the MCH's + * device/functions we want to reference for this driver + * + * Need to 'get' device 16 func 1 and func 2 + */ +int i7core_get_onedevice(struct pci_dev **prev, int devno, + struct pci_id_descr *dev_descr, unsigned n_devs) +{ + struct i7core_dev *i7core_dev; + + struct pci_dev *pdev = NULL; + u8 bus = 0; + u8 socket = 0; + + pdev = pci_get_device(PCI_VENDOR_ID_INTEL, + dev_descr->dev_id, *prev); + + /* + * On Xeon 55xx, the Intel Quckpath Arch Generic Non-core regs + * is at addr 8086:2c40, instead of 8086:2c41. So, we need + * to probe for the alternate address in case of failure + */ + if (dev_descr->dev_id == PCI_DEVICE_ID_INTEL_I7_NONCORE && !pdev) + pdev = pci_get_device(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_I7_NONCORE_ALT, *prev); + + if (dev_descr->dev_id == PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE && !pdev) + pdev = pci_get_device(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_ALT, + *prev); + + if (!pdev) { + if (*prev) { + *prev = pdev; + return 0; + } + + if (dev_descr->optional) + return 0; + + if (devno == 0) + return -ENODEV; + + i7core_printk(KERN_ERR, + "Device not found: dev %02x.%d PCI ID %04x:%04x\n", + dev_descr->dev, dev_descr->func, + PCI_VENDOR_ID_INTEL, dev_descr->dev_id); + + /* End of list, leave */ + return -ENODEV; + } + bus = pdev->bus->number; + + if (bus == 0x3f) + socket = 0; + else + socket = 255 - bus; + + i7core_dev = get_i7core_dev(socket); + if (!i7core_dev) { + i7core_dev = kzalloc(sizeof(*i7core_dev), GFP_KERNEL); + if (!i7core_dev) + return -ENOMEM; + i7core_dev->pdev = kzalloc(sizeof(*i7core_dev->pdev) * n_devs, + GFP_KERNEL); + if (!i7core_dev->pdev) { + kfree(i7core_dev); + return -ENOMEM; + } + i7core_dev->socket = socket; + i7core_dev->n_devs = n_devs; + list_add_tail(&i7core_dev->list, &i7core_edac_list); + } + + if (i7core_dev->pdev[devno]) { + i7core_printk(KERN_ERR, + "Duplicated device for " + "dev %02x:%02x.%d PCI ID %04x:%04x\n", + bus, dev_descr->dev, dev_descr->func, + PCI_VENDOR_ID_INTEL, dev_descr->dev_id); + pci_dev_put(pdev); + return -ENODEV; + } + + i7core_dev->pdev[devno] = pdev; + + /* Sanity check */ + if (unlikely(PCI_SLOT(pdev->devfn) != dev_descr->dev || + PCI_FUNC(pdev->devfn) != dev_descr->func)) { + i7core_printk(KERN_ERR, + "Device PCI ID %04x:%04x " + "has dev %02x:%02x.%d instead of dev %02x:%02x.%d\n", + PCI_VENDOR_ID_INTEL, dev_descr->dev_id, + bus, PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn), + bus, dev_descr->dev, dev_descr->func); + return -ENODEV; + } + + /* Be sure that the device is enabled */ + if (unlikely(pci_enable_device(pdev) < 0)) { + i7core_printk(KERN_ERR, + "Couldn't enable " + "dev %02x:%02x.%d PCI ID %04x:%04x\n", + bus, dev_descr->dev, dev_descr->func, + PCI_VENDOR_ID_INTEL, dev_descr->dev_id); + return -ENODEV; + } + + debugf0("Detected socket %d dev %02x:%02x.%d PCI ID %04x:%04x\n", + socket, bus, dev_descr->dev, + dev_descr->func, + PCI_VENDOR_ID_INTEL, dev_descr->dev_id); + + *prev = pdev; + + return 0; +} + +static int i7core_get_devices(struct pci_id_table *table) +{ + int i, rc; + struct pci_dev *pdev = NULL; + struct pci_id_descr *dev_descr; + + while (table && table->descr) { + dev_descr = table->descr; + for (i = 0; i < table->n_devs; i++) { + pdev = NULL; + do { + rc = i7core_get_onedevice(&pdev, i, &dev_descr[i], + table->n_devs); + if (rc < 0) { + if (i == 0) { + i = table->n_devs; + break; + } + i7core_put_all_devices(); + return -ENODEV; + } + } while (pdev); + } + table++; + } + + return 0; + return 0; +} + +static int mci_bind_devs(struct mem_ctl_info *mci, + struct i7core_dev *i7core_dev) +{ + struct i7core_pvt *pvt = mci->pvt_info; + struct pci_dev *pdev; + int i, func, slot; + + /* Associates i7core_dev and mci for future usage */ + pvt->i7core_dev = i7core_dev; + i7core_dev->mci = mci; + + pvt->is_registered = 0; + for (i = 0; i < i7core_dev->n_devs; i++) { + pdev = i7core_dev->pdev[i]; + if (!pdev) + continue; + + func = PCI_FUNC(pdev->devfn); + slot = PCI_SLOT(pdev->devfn); + if (slot == 3) { + if (unlikely(func > MAX_MCR_FUNC)) + goto error; + pvt->pci_mcr[func] = pdev; + } else if (likely(slot >= 4 && slot < 4 + NUM_CHANS)) { + if (unlikely(func > MAX_CHAN_FUNC)) + goto error; + pvt->pci_ch[slot - 4][func] = pdev; + } else if (!slot && !func) + pvt->pci_noncore = pdev; + else + goto error; + + debugf0("Associated fn %d.%d, dev = %p, socket %d\n", + PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn), + pdev, i7core_dev->socket); + + if (PCI_SLOT(pdev->devfn) == 3 && + PCI_FUNC(pdev->devfn) == 2) + pvt->is_registered = 1; + } + + /* + * Add extra nodes to count errors on udimm + * For registered memory, this is not needed, since the counters + * are already displayed at the standard locations + */ + if (!pvt->is_registered) + i7core_sysfs_attrs[ARRAY_SIZE(i7core_sysfs_attrs)-2].grp = + &i7core_udimm_counters; + + return 0; + +error: + i7core_printk(KERN_ERR, "Device %d, function %d " + "is out of the expected range\n", + slot, func); + return -EINVAL; +} + +/**************************************************************************** + Error check routines + ****************************************************************************/ +static void i7core_rdimm_update_csrow(struct mem_ctl_info *mci, + int chan, int dimm, int add) +{ + char *msg; + struct i7core_pvt *pvt = mci->pvt_info; + int row = pvt->csrow_map[chan][dimm], i; + + for (i = 0; i < add; i++) { + msg = kasprintf(GFP_KERNEL, "Corrected error " + "(Socket=%d channel=%d dimm=%d)", + pvt->i7core_dev->socket, chan, dimm); + + edac_mc_handle_fbd_ce(mci, row, 0, msg); + kfree (msg); + } +} + +static void i7core_rdimm_update_ce_count(struct mem_ctl_info *mci, + int chan, int new0, int new1, int new2) +{ + struct i7core_pvt *pvt = mci->pvt_info; + int add0 = 0, add1 = 0, add2 = 0; + /* Updates CE counters if it is not the first time here */ + if (pvt->ce_count_available) { + /* Updates CE counters */ + + add2 = new2 - pvt->rdimm_last_ce_count[chan][2]; + add1 = new1 - pvt->rdimm_last_ce_count[chan][1]; + add0 = new0 - pvt->rdimm_last_ce_count[chan][0]; + + if (add2 < 0) + add2 += 0x7fff; + pvt->rdimm_ce_count[chan][2] += add2; + + if (add1 < 0) + add1 += 0x7fff; + pvt->rdimm_ce_count[chan][1] += add1; + + if (add0 < 0) + add0 += 0x7fff; + pvt->rdimm_ce_count[chan][0] += add0; + } else + pvt->ce_count_available = 1; + + /* Store the new values */ + pvt->rdimm_last_ce_count[chan][2] = new2; + pvt->rdimm_last_ce_count[chan][1] = new1; + pvt->rdimm_last_ce_count[chan][0] = new0; + + /*updated the edac core */ + if (add0 != 0) + i7core_rdimm_update_csrow(mci, chan, 0, add0); + if (add1 != 0) + i7core_rdimm_update_csrow(mci, chan, 1, add1); + if (add2 != 0) + i7core_rdimm_update_csrow(mci, chan, 2, add2); + +} + +static void i7core_rdimm_check_mc_ecc_err(struct mem_ctl_info *mci) +{ + struct i7core_pvt *pvt = mci->pvt_info; + u32 rcv[3][2]; + int i, new0, new1, new2; + + /*Read DEV 3: FUN 2: MC_COR_ECC_CNT regs directly*/ + pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_0, + &rcv[0][0]); + pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_1, + &rcv[0][1]); + pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_2, + &rcv[1][0]); + pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_3, + &rcv[1][1]); + pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_4, + &rcv[2][0]); + pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_5, + &rcv[2][1]); + for (i = 0 ; i < 3; i++) { + debugf3("MC_COR_ECC_CNT%d = 0x%x; MC_COR_ECC_CNT%d = 0x%x\n", + (i * 2), rcv[i][0], (i * 2) + 1, rcv[i][1]); + /*if the channel has 3 dimms*/ + if (pvt->channel[i].dimms > 2) { + new0 = DIMM_BOT_COR_ERR(rcv[i][0]); + new1 = DIMM_TOP_COR_ERR(rcv[i][0]); + new2 = DIMM_BOT_COR_ERR(rcv[i][1]); + } else { + new0 = DIMM_TOP_COR_ERR(rcv[i][0]) + + DIMM_BOT_COR_ERR(rcv[i][0]); + new1 = DIMM_TOP_COR_ERR(rcv[i][1]) + + DIMM_BOT_COR_ERR(rcv[i][1]); + new2 = 0; + } + + i7core_rdimm_update_ce_count(mci, i, new0, new1, new2); + } +} + +/* This function is based on the device 3 function 4 registers as described on: + * Intel Xeon Processor 5500 Series Datasheet Volume 2 + * http://www.intel.com/Assets/PDF/datasheet/321322.pdf + * also available at: + * http://www.arrownac.com/manufacturers/intel/s/nehalem/5500-datasheet-v2.pdf + */ +static void i7core_udimm_check_mc_ecc_err(struct mem_ctl_info *mci) +{ + struct i7core_pvt *pvt = mci->pvt_info; + u32 rcv1, rcv0; + int new0, new1, new2; + + if (!pvt->pci_mcr[4]) { + debugf0("%s MCR registers not found\n", __func__); + return; + } + + /* Corrected test errors */ + pci_read_config_dword(pvt->pci_mcr[4], MC_TEST_ERR_RCV1, &rcv1); + pci_read_config_dword(pvt->pci_mcr[4], MC_TEST_ERR_RCV0, &rcv0); + + /* Store the new values */ + new2 = DIMM2_COR_ERR(rcv1); + new1 = DIMM1_COR_ERR(rcv0); + new0 = DIMM0_COR_ERR(rcv0); + + /* Updates CE counters if it is not the first time here */ + if (pvt->ce_count_available) { + /* Updates CE counters */ + int add0, add1, add2; + + add2 = new2 - pvt->udimm_last_ce_count[2]; + add1 = new1 - pvt->udimm_last_ce_count[1]; + add0 = new0 - pvt->udimm_last_ce_count[0]; + + if (add2 < 0) + add2 += 0x7fff; + pvt->udimm_ce_count[2] += add2; + + if (add1 < 0) + add1 += 0x7fff; + pvt->udimm_ce_count[1] += add1; + + if (add0 < 0) + add0 += 0x7fff; + pvt->udimm_ce_count[0] += add0; + + if (add0 | add1 | add2) + i7core_printk(KERN_ERR, "New Corrected error(s): " + "dimm0: +%d, dimm1: +%d, dimm2 +%d\n", + add0, add1, add2); + } else + pvt->ce_count_available = 1; + + /* Store the new values */ + pvt->udimm_last_ce_count[2] = new2; + pvt->udimm_last_ce_count[1] = new1; + pvt->udimm_last_ce_count[0] = new0; +} + +/* + * According with tables E-11 and E-12 of chapter E.3.3 of Intel 64 and IA-32 + * Architectures Software Developer’s Manual Volume 3B. + * Nehalem are defined as family 0x06, model 0x1a + * + * The MCA registers used here are the following ones: + * struct mce field MCA Register + * m->status MSR_IA32_MC8_STATUS + * m->addr MSR_IA32_MC8_ADDR + * m->misc MSR_IA32_MC8_MISC + * In the case of Nehalem, the error information is masked at .status and .misc + * fields + */ +static void i7core_mce_output_error(struct mem_ctl_info *mci, + struct mce *m) +{ + struct i7core_pvt *pvt = mci->pvt_info; + char *type, *optype, *err, *msg; + unsigned long error = m->status & 0x1ff0000l; + u32 optypenum = (m->status >> 4) & 0x07; + u32 core_err_cnt = (m->status >> 38) && 0x7fff; + u32 dimm = (m->misc >> 16) & 0x3; + u32 channel = (m->misc >> 18) & 0x3; + u32 syndrome = m->misc >> 32; + u32 errnum = find_first_bit(&error, 32); + int csrow; + + if (m->mcgstatus & 1) + type = "FATAL"; + else + type = "NON_FATAL"; + + switch (optypenum) { + case 0: + optype = "generic undef request"; + break; + case 1: + optype = "read error"; + break; + case 2: + optype = "write error"; + break; + case 3: + optype = "addr/cmd error"; + break; + case 4: + optype = "scrubbing error"; + break; + default: + optype = "reserved"; + break; + } + + switch (errnum) { + case 16: + err = "read ECC error"; + break; + case 17: + err = "RAS ECC error"; + break; + case 18: + err = "write parity error"; + break; + case 19: + err = "redundacy loss"; + break; + case 20: + err = "reserved"; + break; + case 21: + err = "memory range error"; + break; + case 22: + err = "RTID out of range"; + break; + case 23: + err = "address parity error"; + break; + case 24: + err = "byte enable parity error"; + break; + default: + err = "unknown"; + } + + /* FIXME: should convert addr into bank and rank information */ + msg = kasprintf(GFP_ATOMIC, + "%s (addr = 0x%08llx, cpu=%d, Dimm=%d, Channel=%d, " + "syndrome=0x%08x, count=%d, Err=%08llx:%08llx (%s: %s))\n", + type, (long long) m->addr, m->cpu, dimm, channel, + syndrome, core_err_cnt, (long long)m->status, + (long long)m->misc, optype, err); + + debugf0("%s", msg); + + csrow = pvt->csrow_map[channel][dimm]; + + /* Call the helper to output message */ + if (m->mcgstatus & 1) + edac_mc_handle_fbd_ue(mci, csrow, 0, + 0 /* FIXME: should be channel here */, msg); + else if (!pvt->is_registered) + edac_mc_handle_fbd_ce(mci, csrow, + 0 /* FIXME: should be channel here */, msg); + + kfree(msg); +} + +/* + * i7core_check_error Retrieve and process errors reported by the + * hardware. Called by the Core module. + */ +static void i7core_check_error(struct mem_ctl_info *mci) +{ + struct i7core_pvt *pvt = mci->pvt_info; + int i; + unsigned count = 0; + struct mce *m; + + /* + * MCE first step: Copy all mce errors into a temporary buffer + * We use a double buffering here, to reduce the risk of + * loosing an error. + */ + smp_rmb(); + count = (pvt->mce_out + MCE_LOG_LEN - pvt->mce_in) + % MCE_LOG_LEN; + if (!count) + goto check_ce_error; + + m = pvt->mce_outentry; + if (pvt->mce_in + count > MCE_LOG_LEN) { + unsigned l = MCE_LOG_LEN - pvt->mce_in; + + memcpy(m, &pvt->mce_entry[pvt->mce_in], sizeof(*m) * l); + smp_wmb(); + pvt->mce_in = 0; + count -= l; + m += l; + } + memcpy(m, &pvt->mce_entry[pvt->mce_in], sizeof(*m) * count); + smp_wmb(); + pvt->mce_in += count; + + smp_rmb(); + if (pvt->mce_overrun) { + i7core_printk(KERN_ERR, "Lost %d memory errors\n", + pvt->mce_overrun); + smp_wmb(); + pvt->mce_overrun = 0; + } + + /* + * MCE second step: parse errors and display + */ + for (i = 0; i < count; i++) + i7core_mce_output_error(mci, &pvt->mce_outentry[i]); + + /* + * Now, let's increment CE error counts + */ +check_ce_error: + if (!pvt->is_registered) + i7core_udimm_check_mc_ecc_err(mci); + else + i7core_rdimm_check_mc_ecc_err(mci); +} + +/* + * i7core_mce_check_error Replicates mcelog routine to get errors + * This routine simply queues mcelog errors, and + * return. The error itself should be handled later + * by i7core_check_error. + * WARNING: As this routine should be called at NMI time, extra care should + * be taken to avoid deadlocks, and to be as fast as possible. + */ +static int i7core_mce_check_error(void *priv, struct mce *mce) +{ + struct mem_ctl_info *mci = priv; + struct i7core_pvt *pvt = mci->pvt_info; + + /* + * Just let mcelog handle it if the error is + * outside the memory controller + */ + if (((mce->status & 0xffff) >> 7) != 1) + return 0; + + /* Bank 8 registers are the only ones that we know how to handle */ + if (mce->bank != 8) + return 0; + +#ifdef CONFIG_SMP + /* Only handle if it is the right mc controller */ + if (cpu_data(mce->cpu).phys_proc_id != pvt->i7core_dev->socket) + return 0; +#endif + + smp_rmb(); + if ((pvt->mce_out + 1) % MCE_LOG_LEN == pvt->mce_in) { + smp_wmb(); + pvt->mce_overrun++; + return 0; + } + + /* Copy memory error at the ringbuffer */ + memcpy(&pvt->mce_entry[pvt->mce_out], mce, sizeof(*mce)); + smp_wmb(); + pvt->mce_out = (pvt->mce_out + 1) % MCE_LOG_LEN; + + /* Handle fatal errors immediately */ + if (mce->mcgstatus & 1) + i7core_check_error(mci); + + /* Advice mcelog that the error were handled */ + return 1; +} + +static int i7core_register_mci(struct i7core_dev *i7core_dev, + int num_channels, int num_csrows) +{ + struct mem_ctl_info *mci; + struct i7core_pvt *pvt; + int csrow = 0; + int rc; + + /* allocate a new MC control structure */ + mci = edac_mc_alloc(sizeof(*pvt), num_csrows, num_channels, + i7core_dev->socket); + if (unlikely(!mci)) + return -ENOMEM; + + debugf0("MC: " __FILE__ ": %s(): mci = %p\n", __func__, mci); + + /* record ptr to the generic device */ + mci->dev = &i7core_dev->pdev[0]->dev; + + pvt = mci->pvt_info; + memset(pvt, 0, sizeof(*pvt)); + + /* + * FIXME: how to handle RDDR3 at MCI level? It is possible to have + * Mixed RDDR3/UDDR3 with Nehalem, provided that they are on different + * memory channels + */ + mci->mtype_cap = MEM_FLAG_DDR3; + mci->edac_ctl_cap = EDAC_FLAG_NONE; + mci->edac_cap = EDAC_FLAG_NONE; + mci->mod_name = "i7core_edac.c"; + mci->mod_ver = I7CORE_REVISION; + mci->ctl_name = kasprintf(GFP_KERNEL, "i7 core #%d", + i7core_dev->socket); + mci->dev_name = pci_name(i7core_dev->pdev[0]); + mci->ctl_page_to_phys = NULL; + mci->mc_driver_sysfs_attributes = i7core_sysfs_attrs; + /* Set the function pointer to an actual operation function */ + mci->edac_check = i7core_check_error; + + /* Store pci devices at mci for faster access */ + rc = mci_bind_devs(mci, i7core_dev); + if (unlikely(rc < 0)) + goto fail; + + /* Get dimm basic config */ + get_dimm_config(mci, &csrow); + + /* add this new MC control structure to EDAC's list of MCs */ + if (unlikely(edac_mc_add_mc(mci))) { + debugf0("MC: " __FILE__ + ": %s(): failed edac_mc_add_mc()\n", __func__); + /* FIXME: perhaps some code should go here that disables error + * reporting if we just enabled it + */ + + rc = -EINVAL; + goto fail; + } + + /* allocating generic PCI control info */ + i7core_pci = edac_pci_create_generic_ctl(&i7core_dev->pdev[0]->dev, + EDAC_MOD_STR); + if (unlikely(!i7core_pci)) { + printk(KERN_WARNING + "%s(): Unable to create PCI control\n", + __func__); + printk(KERN_WARNING + "%s(): PCI error report via EDAC not setup\n", + __func__); + } + + /* Default error mask is any memory */ + pvt->inject.channel = 0; + pvt->inject.dimm = -1; + pvt->inject.rank = -1; + pvt->inject.bank = -1; + pvt->inject.page = -1; + pvt->inject.col = -1; + + /* Registers on edac_mce in order to receive memory errors */ + pvt->edac_mce.priv = mci; + pvt->edac_mce.check_error = i7core_mce_check_error; + + rc = edac_mce_register(&pvt->edac_mce); + if (unlikely(rc < 0)) { + debugf0("MC: " __FILE__ + ": %s(): failed edac_mce_register()\n", __func__); + } + +fail: + if (rc < 0) + edac_mc_free(mci); + return rc; +} + +/* + * i7core_probe Probe for ONE instance of device to see if it is + * present. + * return: + * 0 for FOUND a device + * < 0 for error code + */ +static int __devinit i7core_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + int dev_idx = id->driver_data; + int rc; + struct i7core_dev *i7core_dev; + + /* + * All memory controllers are allocated at the first pass. + */ + if (unlikely(dev_idx >= 1)) + return -EINVAL; + + /* get the pci devices we want to reserve for our use */ + mutex_lock(&i7core_edac_lock); + + rc = i7core_get_devices(pci_dev_table); + if (unlikely(rc < 0)) + goto fail0; + + list_for_each_entry(i7core_dev, &i7core_edac_list, list) { + int channels; + int csrows; + + /* Check the number of active and not disabled channels */ + rc = i7core_get_active_channels(i7core_dev->socket, + &channels, &csrows); + if (unlikely(rc < 0)) + goto fail1; + + rc = i7core_register_mci(i7core_dev, channels, csrows); + if (unlikely(rc < 0)) + goto fail1; + } + + i7core_printk(KERN_INFO, "Driver loaded.\n"); + + mutex_unlock(&i7core_edac_lock); + return 0; + +fail1: + i7core_put_all_devices(); +fail0: + mutex_unlock(&i7core_edac_lock); + return rc; +} + +/* + * i7core_remove destructor for one instance of device + * + */ +static void __devexit i7core_remove(struct pci_dev *pdev) +{ + struct mem_ctl_info *mci; + struct i7core_dev *i7core_dev, *tmp; + + debugf0(__FILE__ ": %s()\n", __func__); + + if (i7core_pci) + edac_pci_release_generic_ctl(i7core_pci); + + /* + * we have a trouble here: pdev value for removal will be wrong, since + * it will point to the X58 register used to detect that the machine + * is a Nehalem or upper design. However, due to the way several PCI + * devices are grouped together to provide MC functionality, we need + * to use a different method for releasing the devices + */ + + mutex_lock(&i7core_edac_lock); + list_for_each_entry_safe(i7core_dev, tmp, &i7core_edac_list, list) { + mci = edac_mc_del_mc(&i7core_dev->pdev[0]->dev); + if (mci) { + struct i7core_pvt *pvt = mci->pvt_info; + + i7core_dev = pvt->i7core_dev; + edac_mce_unregister(&pvt->edac_mce); + kfree(mci->ctl_name); + edac_mc_free(mci); + i7core_put_devices(i7core_dev); + } else { + i7core_printk(KERN_ERR, + "Couldn't find mci for socket %d\n", + i7core_dev->socket); + } + } + mutex_unlock(&i7core_edac_lock); +} + +MODULE_DEVICE_TABLE(pci, i7core_pci_tbl); + +/* + * i7core_driver pci_driver structure for this module + * + */ +static struct pci_driver i7core_driver = { + .name = "i7core_edac", + .probe = i7core_probe, + .remove = __devexit_p(i7core_remove), + .id_table = i7core_pci_tbl, +}; + +/* + * i7core_init Module entry function + * Try to initialize this module for its devices + */ +static int __init i7core_init(void) +{ + int pci_rc; + + debugf2("MC: " __FILE__ ": %s()\n", __func__); + + /* Ensure that the OPSTATE is set correctly for POLL or NMI */ + opstate_init(); + + i7core_xeon_pci_fixup(pci_dev_table); + + pci_rc = pci_register_driver(&i7core_driver); + + if (pci_rc >= 0) + return 0; + + i7core_printk(KERN_ERR, "Failed to register device with error %d.\n", + pci_rc); + + return pci_rc; +} + +/* + * i7core_exit() Module exit function + * Unregister the driver + */ +static void __exit i7core_exit(void) +{ + debugf2("MC: " __FILE__ ": %s()\n", __func__); + pci_unregister_driver(&i7core_driver); +} + +module_init(i7core_init); +module_exit(i7core_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab "); +MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com)"); +MODULE_DESCRIPTION("MC Driver for Intel i7 Core memory controllers - " + I7CORE_REVISION); + +module_param(edac_op_state, int, 0444); +MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI"); diff --git a/include/linux/edac_mce.h b/include/linux/edac_mce.h new file mode 100644 index 0000000000000000000000000000000000000000..f974fc035363de46eca791df747a4dda73c795df --- /dev/null +++ b/include/linux/edac_mce.h @@ -0,0 +1,31 @@ +/* Provides edac interface to mcelog events + * + * This file may be distributed under the terms of the + * GNU General Public License version 2. + * + * Copyright (c) 2009 by: + * Mauro Carvalho Chehab + * + * Red Hat Inc. http://www.redhat.com + */ + +#if defined(CONFIG_EDAC_MCE) || \ + (defined(CONFIG_EDAC_MCE_MODULE) && defined(MODULE)) + +#include +#include + +struct edac_mce { + struct list_head list; + + void *priv; + int (*check_error)(void *priv, struct mce *mce); +}; + +int edac_mce_register(struct edac_mce *edac_mce); +void edac_mce_unregister(struct edac_mce *edac_mce); +int edac_mce_parse(struct mce *mce); + +#else +#define edac_mce_parse(mce) (0) +#endif diff --git a/include/linux/pci.h b/include/linux/pci.h index 6a471aba3b07aced498219d4e39498e6d577bfc0..7cb00845f150ca185b73a47931c6a1fbcd4c1cef 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -632,6 +632,7 @@ void pci_fixup_cardbus(struct pci_bus *); /* Generic PCI functions used internally */ +void pcibios_scan_specific_bus(int busn); extern struct pci_bus *pci_find_bus(int domain, int busnr); void pci_bus_add_devices(const struct pci_bus *bus); struct pci_bus *pci_scan_bus_parented(struct device *parent, int bus, diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index ae66851870becb2e496d7994f7a11a548aac16d8..f149dd10908ba3a5d38df5a6252ef1100aa4243e 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2532,11 +2532,63 @@ #define PCI_DEVICE_ID_INTEL_ICH9_6 0x2930 #define PCI_DEVICE_ID_INTEL_ICH9_7 0x2916 #define PCI_DEVICE_ID_INTEL_ICH9_8 0x2918 +#define PCI_DEVICE_ID_INTEL_I7_MCR 0x2c18 +#define PCI_DEVICE_ID_INTEL_I7_MC_TAD 0x2c19 +#define PCI_DEVICE_ID_INTEL_I7_MC_RAS 0x2c1a +#define PCI_DEVICE_ID_INTEL_I7_MC_TEST 0x2c1c +#define PCI_DEVICE_ID_INTEL_I7_MC_CH0_CTRL 0x2c20 +#define PCI_DEVICE_ID_INTEL_I7_MC_CH0_ADDR 0x2c21 +#define PCI_DEVICE_ID_INTEL_I7_MC_CH0_RANK 0x2c22 +#define PCI_DEVICE_ID_INTEL_I7_MC_CH0_TC 0x2c23 +#define PCI_DEVICE_ID_INTEL_I7_MC_CH1_CTRL 0x2c28 +#define PCI_DEVICE_ID_INTEL_I7_MC_CH1_ADDR 0x2c29 +#define PCI_DEVICE_ID_INTEL_I7_MC_CH1_RANK 0x2c2a +#define PCI_DEVICE_ID_INTEL_I7_MC_CH1_TC 0x2c2b +#define PCI_DEVICE_ID_INTEL_I7_MC_CH2_CTRL 0x2c30 +#define PCI_DEVICE_ID_INTEL_I7_MC_CH2_ADDR 0x2c31 +#define PCI_DEVICE_ID_INTEL_I7_MC_CH2_RANK 0x2c32 +#define PCI_DEVICE_ID_INTEL_I7_MC_CH2_TC 0x2c33 +#define PCI_DEVICE_ID_INTEL_I7_NONCORE 0x2c41 +#define PCI_DEVICE_ID_INTEL_I7_NONCORE_ALT 0x2c40 +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE 0x2c50 +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_ALT 0x2c51 +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_REV2 0x2c70 +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_SAD 0x2c81 +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_QPI_LINK0 0x2c90 +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_QPI_PHY0 0x2c91 +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MCR 0x2c98 +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TAD 0x2c99 +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TEST 0x2c9C +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_CTRL 0x2ca0 +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_ADDR 0x2ca1 +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_RANK 0x2ca2 +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_TC 0x2ca3 +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_CTRL 0x2ca8 +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_ADDR 0x2ca9 +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_RANK 0x2caa +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_TC 0x2cab +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MCR_REV2 0x2d98 +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TAD_REV2 0x2d99 +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_RAS_REV2 0x2d9a +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TEST_REV2 0x2d9c +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_CTRL_REV2 0x2da0 +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_ADDR_REV2 0x2da1 +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_RANK_REV2 0x2da2 +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_TC_REV2 0x2da3 +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_CTRL_REV2 0x2da8 +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_ADDR_REV2 0x2da9 +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_RANK_REV2 0x2daa +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_TC_REV2 0x2dab +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_CTRL_REV2 0x2db0 +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_ADDR_REV2 0x2db1 +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_RANK_REV2 0x2db2 +#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_TC_REV2 0x2db3 #define PCI_DEVICE_ID_INTEL_82855PM_HB 0x3340 #define PCI_DEVICE_ID_INTEL_IOAT_TBG4 0x3429 #define PCI_DEVICE_ID_INTEL_IOAT_TBG5 0x342a #define PCI_DEVICE_ID_INTEL_IOAT_TBG6 0x342b #define PCI_DEVICE_ID_INTEL_IOAT_TBG7 0x342c +#define PCI_DEVICE_ID_INTEL_X58_HUB_MGMT 0x342e #define PCI_DEVICE_ID_INTEL_IOAT_TBG0 0x3430 #define PCI_DEVICE_ID_INTEL_IOAT_TBG1 0x3431 #define PCI_DEVICE_ID_INTEL_IOAT_TBG2 0x3432