提交 93173ce2 编写于 作者: S Stefan Roese 提交者: Josh Boyer

[POWERPC] 4xx: Create common ppc4xx_reset_system() in ppc4xx_soc.c

This patch creates a common system reset routine for all 40x and 44x
systems. Previously only a 44x routine existed. But since this system
reset via the debug control register is common for 40x and 44x let's
share this code for all those platforms in ppc4xx_soc.c.

This patch also enables CONFIG_4xx_SOC for all 40x and 44x platforms.

Tested on Kilauea (405EX) and Canyonlands (440EX).
Signed-off-by: NStefan Roese <sr@denx.de>
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
上级 d2477b5c
......@@ -29,6 +29,7 @@
#include <asm/time.h>
#include <asm/uic.h>
#include <asm/pci-bridge.h>
#include <asm/ppc4xx.h>
static struct device_node *bcsr_node;
static void __iomem *bcsr_regs;
......@@ -119,5 +120,6 @@ define_machine(ep405) {
.progress = udbg_progress,
.init_IRQ = uic_init_tree,
.get_irq = uic_get_irq,
.restart = ppc4xx_reset_system,
.calibrate_decr = generic_calibrate_decr,
};
/*
* Kilauea board specific routines
*
* Copyright 2007 DENX Software Engineering, Stefan Roese <sr@denx.de>
* Copyright 2007-2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
*
* Based on the Walnut code by
* Josh Boyer <jwboyer@linux.vnet.ibm.com>
......@@ -20,6 +20,7 @@
#include <asm/time.h>
#include <asm/uic.h>
#include <asm/pci-bridge.h>
#include <asm/ppc4xx.h>
static __initdata struct of_device_id kilauea_of_bus[] = {
{ .compatible = "ibm,plb4", },
......@@ -54,5 +55,6 @@ define_machine(kilauea) {
.progress = udbg_progress,
.init_IRQ = uic_init_tree,
.get_irq = uic_get_irq,
.restart = ppc4xx_reset_system,
.calibrate_decr = generic_calibrate_decr,
};
......@@ -20,6 +20,7 @@
#include <asm/time.h>
#include <asm/uic.h>
#include <asm/pci-bridge.h>
#include <asm/ppc4xx.h>
static __initdata struct of_device_id makalu_of_bus[] = {
{ .compatible = "ibm,plb4", },
......@@ -54,5 +55,6 @@ define_machine(makalu) {
.progress = udbg_progress,
.init_IRQ = uic_init_tree,
.get_irq = uic_get_irq,
.restart = ppc4xx_reset_system,
.calibrate_decr = generic_calibrate_decr,
};
......@@ -14,6 +14,7 @@
#include <asm/prom.h>
#include <asm/time.h>
#include <asm/xilinx_intc.h>
#include <asm/ppc4xx.h>
static struct of_device_id xilinx_of_bus_ids[] __initdata = {
{ .compatible = "xlnx,plb-v46-1.00.a", },
......@@ -48,5 +49,6 @@ define_machine(virtex) {
.probe = virtex_probe,
.init_IRQ = xilinx_intc_init_tree,
.get_irq = xilinx_intc_get_irq,
.restart = ppc4xx_reset_system,
.calibrate_decr = generic_calibrate_decr,
};
......@@ -26,6 +26,7 @@
#include <asm/time.h>
#include <asm/uic.h>
#include <asm/pci-bridge.h>
#include <asm/ppc4xx.h>
static __initdata struct of_device_id walnut_of_bus[] = {
{ .compatible = "ibm,plb3", },
......@@ -61,5 +62,6 @@ define_machine(walnut) {
.progress = udbg_progress,
.init_IRQ = uic_init_tree,
.get_irq = uic_get_irq,
.calibrate_decr = generic_calibrate_decr,
.restart = ppc4xx_reset_system,
.calibrate_decr = generic_calibrate_decr,
};
......@@ -3,6 +3,5 @@
extern u8 as1_readb(volatile u8 __iomem *addr);
extern void as1_writeb(u8 data, volatile u8 __iomem *addr);
extern void ppc44x_reset_system(char *cmd);
#endif /* __POWERPC_PLATFORMS_44X_44X_H */
......@@ -129,7 +129,6 @@ config 440GP
config 440GX
bool
select 4xx_SOC
select IBM_NEW_EMAC_EMAC4
select IBM_NEW_EMAC_RGMII
select IBM_NEW_EMAC_ZMII #test only
......
......@@ -22,8 +22,7 @@
#include <asm/time.h>
#include <asm/uic.h>
#include <asm/pci-bridge.h>
#include "44x.h"
#include <asm/ppc4xx.h>
static __initdata struct of_device_id bamboo_of_bus[] = {
{ .compatible = "ibm,plb4", },
......@@ -53,11 +52,11 @@ static int __init bamboo_probe(void)
}
define_machine(bamboo) {
.name = "Bamboo",
.probe = bamboo_probe,
.progress = udbg_progress,
.init_IRQ = uic_init_tree,
.get_irq = uic_get_irq,
.restart = ppc44x_reset_system,
.name = "Bamboo",
.probe = bamboo_probe,
.progress = udbg_progress,
.init_IRQ = uic_init_tree,
.get_irq = uic_get_irq,
.restart = ppc4xx_reset_system,
.calibrate_decr = generic_calibrate_decr,
};
......@@ -23,8 +23,7 @@
#include <asm/time.h>
#include <asm/uic.h>
#include <asm/pci-bridge.h>
#include "44x.h"
#include <asm/ppc4xx.h>
static __initdata struct of_device_id canyonlands_of_bus[] = {
{ .compatible = "ibm,plb4", },
......@@ -59,6 +58,6 @@ define_machine(canyonlands) {
.progress = udbg_progress,
.init_IRQ = uic_init_tree,
.get_irq = uic_get_irq,
.restart = ppc44x_reset_system,
.restart = ppc4xx_reset_system,
.calibrate_decr = generic_calibrate_decr,
};
......@@ -26,8 +26,7 @@
#include <asm/time.h>
#include <asm/uic.h>
#include <asm/pci-bridge.h>
#include "44x.h"
#include <asm/ppc4xx.h>
static __initdata struct of_device_id ebony_of_bus[] = {
{ .compatible = "ibm,plb4", },
......@@ -66,6 +65,6 @@ define_machine(ebony) {
.progress = udbg_progress,
.init_IRQ = uic_init_tree,
.get_irq = uic_get_irq,
.restart = ppc44x_reset_system,
.restart = ppc4xx_reset_system,
.calibrate_decr = generic_calibrate_decr,
};
......@@ -22,8 +22,7 @@
#include <asm/time.h>
#include <asm/uic.h>
#include <asm/pci-bridge.h>
#include "44x.h"
#include <asm/ppc4xx.h>
static __initdata struct of_device_id katmai_of_bus[] = {
{ .compatible = "ibm,plb4", },
......@@ -58,6 +57,6 @@ define_machine(katmai) {
.progress = udbg_progress,
.init_IRQ = uic_init_tree,
.get_irq = uic_get_irq,
.restart = ppc44x_reset_system,
.restart = ppc4xx_reset_system,
.calibrate_decr = generic_calibrate_decr,
};
......@@ -44,14 +44,3 @@ _GLOBAL(as1_writeb)
sync
isync
blr
/*
* void ppc44x_reset_system(char *cmd)
*
* At present, this routine just applies a system reset.
*/
_GLOBAL(ppc44x_reset_system)
mfspr r13,SPRN_DBCR0
oris r13,r13,DBCR0_RST_SYSTEM@h
mtspr SPRN_DBCR0,r13
b . /* Just in case the reset doesn't work */
......@@ -22,7 +22,7 @@
#include <asm/time.h>
#include <asm/uic.h>
#include <asm/pci-bridge.h>
#include "44x.h"
#include <asm/ppc4xx.h>
static __initdata struct of_device_id rainier_of_bus[] = {
{ .compatible = "ibm,plb4", },
......@@ -57,6 +57,6 @@ define_machine(rainier) {
.progress = udbg_progress,
.init_IRQ = uic_init_tree,
.get_irq = uic_get_irq,
.restart = ppc44x_reset_system,
.restart = ppc4xx_reset_system,
.calibrate_decr = generic_calibrate_decr,
};
......@@ -23,7 +23,7 @@
#include <asm/uic.h>
#include <asm/pci-bridge.h>
#include "44x.h"
#include <asm/ppc4xx.h>
static __initdata struct of_device_id sequoia_of_bus[] = {
{ .compatible = "ibm,plb4", },
......@@ -58,6 +58,6 @@ define_machine(sequoia) {
.progress = udbg_progress,
.init_IRQ = uic_init_tree,
.get_irq = uic_get_irq,
.restart = ppc44x_reset_system,
.restart = ppc4xx_reset_system,
.calibrate_decr = generic_calibrate_decr,
};
......@@ -29,8 +29,7 @@
#include <asm/time.h>
#include <asm/uic.h>
#include <asm/pci-bridge.h>
#include "44x.h"
#include <asm/ppc4xx.h>
static __initdata struct of_device_id taishan_of_bus[] = {
{ .compatible = "ibm,plb4", },
......@@ -68,6 +67,6 @@ define_machine(taishan) {
.progress = udbg_progress,
.init_IRQ = uic_init_tree,
.get_irq = uic_get_irq,
.restart = ppc44x_reset_system,
.restart = ppc4xx_reset_system,
.calibrate_decr = generic_calibrate_decr,
};
......@@ -18,9 +18,7 @@
#include <asm/udbg.h>
#include <asm/time.h>
#include <asm/uic.h>
#include "44x.h"
#include <asm/ppc4xx.h>
static __initdata struct of_device_id warp_of_bus[] = {
{ .compatible = "ibm,plb4", },
......@@ -49,7 +47,7 @@ define_machine(warp) {
.progress = udbg_progress,
.init_IRQ = uic_init_tree,
.get_irq = uic_get_irq,
.restart = ppc44x_reset_system,
.restart = ppc4xx_reset_system,
.calibrate_decr = generic_calibrate_decr,
};
......
......@@ -41,11 +41,13 @@ config 40x
bool "AMCC 40x"
select PPC_DCR_NATIVE
select PPC_UDBG_16550
select 4xx_SOC
config 44x
bool "AMCC 44x"
select PPC_DCR_NATIVE
select PPC_UDBG_16550
select 4xx_SOC
config E200
bool "Freescale e200"
......
......@@ -23,6 +23,7 @@
#include <asm/dcr.h>
#include <asm/dcr-regs.h>
#include <asm/reg.h>
static u32 dcrbase_l2c;
......@@ -187,3 +188,13 @@ static int __init ppc4xx_l2c_probe(void)
return 0;
}
arch_initcall(ppc4xx_l2c_probe);
/*
* At present, this routine just applies a system reset.
*/
void ppc4xx_reset_system(char *cmd)
{
mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) | DBCR0_RST_SYSTEM);
while (1)
; /* Just in case the reset doesn't work */
}
/*
* PPC4xx Prototypes and definitions
*
* Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
*
* This is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
*/
#ifndef __ASM_POWERPC_PPC4xx_H__
#define __ASM_POWERPC_PPC4xx_H__
extern void ppc4xx_reset_system(char *cmd);
#endif /* __ASM_POWERPC_PPC4xx_H__ */
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册