diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c index 8cc9198ac32f5efa5507c3e97b6d9b94ec03f9eb..3647af8fe32ed11cd265235d86d2963b7ceea995 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c +++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c @@ -2315,8 +2315,8 @@ static void i40e_set_itr_per_queue(struct i40e_vsi *vsi, intrl = i40e_intrl_usec_to_reg(vsi->int_rate_limit); - rx_ring->itr_setting = ec->rx_coalesce_usecs; - tx_ring->itr_setting = ec->tx_coalesce_usecs; + rx_ring->itr_setting = ITR_REG_ALIGN(ec->rx_coalesce_usecs); + tx_ring->itr_setting = ITR_REG_ALIGN(ec->tx_coalesce_usecs); if (ec->use_adaptive_rx_coalesce) rx_ring->itr_setting |= I40E_ITR_DYNAMIC; @@ -2396,7 +2396,7 @@ static int __i40e_set_coalesce(struct net_device *netdev, return -EINVAL; } - if (ec->rx_coalesce_usecs > (I40E_MAX_ITR << 1)) { + if (ec->rx_coalesce_usecs > I40E_MAX_ITR) { netif_info(pf, drv, netdev, "Invalid value, rx-usecs range is 0-8160\n"); return -EINVAL; } @@ -2407,16 +2407,16 @@ static int __i40e_set_coalesce(struct net_device *netdev, return -EINVAL; } - if (ec->tx_coalesce_usecs > (I40E_MAX_ITR << 1)) { + if (ec->tx_coalesce_usecs > I40E_MAX_ITR) { netif_info(pf, drv, netdev, "Invalid value, tx-usecs range is 0-8160\n"); return -EINVAL; } if (ec->use_adaptive_rx_coalesce && !cur_rx_itr) - ec->rx_coalesce_usecs = I40E_MIN_ITR << 1; + ec->rx_coalesce_usecs = I40E_MIN_ITR; if (ec->use_adaptive_tx_coalesce && !cur_tx_itr) - ec->tx_coalesce_usecs = I40E_MIN_ITR << 1; + ec->tx_coalesce_usecs = I40E_MIN_ITR; intrl_reg = i40e_intrl_usec_to_reg(ec->rx_coalesce_usecs_high); vsi->int_rate_limit = INTRL_REG_TO_USEC(intrl_reg); diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c index ac1fa9e3c04ff4aeebd4561e7b897a41a3388169..ade3e17fba6ccf281790841e845b7664b767595a 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c +++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c @@ -2277,7 +2277,7 @@ static int i40e_clean_rx_irq(struct i40e_ring *rx_ring, int budget) return failure ? budget : (int)total_rx_packets; } -static u32 i40e_buildreg_itr(const int type, const u16 itr) +static inline u32 i40e_buildreg_itr(const int type, u16 itr) { u32 val; @@ -2290,10 +2290,17 @@ static u32 i40e_buildreg_itr(const int type, const u16 itr) * xxINT_DYN_CTLx CSR with INTENA_MSK (bit 31) set to 0 will clear * an event in the PBA anyway so we need to rely on the automask * to hold pending events for us until the interrupt is re-enabled + * + * The itr value is reported in microseconds, and the register + * value is recorded in 2 microsecond units. For this reason we + * only need to shift by the interval shift - 1 instead of the + * full value. */ + itr &= I40E_ITR_MASK; + val = I40E_PFINT_DYN_CTLN_INTENA_MASK | (type << I40E_PFINT_DYN_CTLN_ITR_INDX_SHIFT) | - (itr << I40E_PFINT_DYN_CTLN_INTERVAL_SHIFT); + (itr << (I40E_PFINT_DYN_CTLN_INTERVAL_SHIFT - 1)); return val; } diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.h b/drivers/net/ethernet/intel/i40e/i40e_txrx.h index 1758dd3bf91b133744368839921d95ec530876e6..0f8751c2e5950c73c57ecdc37231e1c6e60b3070 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_txrx.h +++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.h @@ -30,32 +30,37 @@ #include /* Interrupt Throttling and Rate Limiting Goodies */ - -#define I40E_MAX_ITR 0x0FF0 /* reg uses 2 usec resolution */ -#define I40E_MIN_ITR 0x0001 /* reg uses 2 usec resolution */ -#define I40E_ITR_100K 0x0005 -#define I40E_ITR_50K 0x000A -#define I40E_ITR_20K 0x0019 -#define I40E_ITR_18K 0x001B -#define I40E_ITR_8K 0x003E -#define I40E_ITR_4K 0x007A -#define I40E_MAX_INTRL 0x3B /* reg uses 4 usec resolution */ -#define I40E_ITR_RX_DEF (ITR_REG_TO_USEC(I40E_ITR_20K) | \ - I40E_ITR_DYNAMIC) -#define I40E_ITR_TX_DEF (ITR_REG_TO_USEC(I40E_ITR_20K) | \ - I40E_ITR_DYNAMIC) -#define I40E_ITR_DYNAMIC 0x8000 /* use top bit as a flag */ -#define I40E_MIN_INT_RATE 250 /* ~= 1000000 / (I40E_MAX_ITR * 2) */ -#define I40E_MAX_INT_RATE 500000 /* == 1000000 / (I40E_MIN_ITR * 2) */ #define I40E_DEFAULT_IRQ_WORK 256 -#define ITR_TO_REG(setting) ((setting & ~I40E_ITR_DYNAMIC) >> 1) -#define ITR_IS_DYNAMIC(setting) (!!(setting & I40E_ITR_DYNAMIC)) -#define ITR_REG_TO_USEC(itr_reg) (itr_reg << 1) + +/* The datasheet for the X710 and XL710 indicate that the maximum value for + * the ITR is 8160usec which is then called out as 0xFF0 with a 2usec + * resolution. 8160 is 0x1FE0 when written out in hex. So instead of storing + * the register value which is divided by 2 lets use the actual values and + * avoid an excessive amount of translation. + */ +#define I40E_ITR_DYNAMIC 0x8000 /* use top bit as a flag */ +#define I40E_ITR_MASK 0x1FFE /* mask for ITR register value */ +#define I40E_MIN_ITR 2 /* reg uses 2 usec resolution */ +#define I40E_ITR_100K 10 /* all values below must be even */ +#define I40E_ITR_50K 20 +#define I40E_ITR_20K 50 +#define I40E_ITR_18K 60 +#define I40E_ITR_8K 122 +#define I40E_MAX_ITR 8160 /* maximum value as per datasheet */ +#define ITR_TO_REG(setting) ((setting) & ~I40E_ITR_DYNAMIC) +#define ITR_REG_ALIGN(setting) __ALIGN_MASK(setting, ~I40E_ITR_MASK) +#define ITR_IS_DYNAMIC(setting) (!!((setting) & I40E_ITR_DYNAMIC)) + +#define I40E_ITR_RX_DEF (I40E_ITR_20K | I40E_ITR_DYNAMIC) +#define I40E_ITR_TX_DEF (I40E_ITR_20K | I40E_ITR_DYNAMIC) + /* 0x40 is the enable bit for interrupt rate limiting, and must be set if * the value of the rate limit is non-zero */ #define INTRL_ENA BIT(6) +#define I40E_MAX_INTRL 0x3B /* reg uses 4 usec resolution */ #define INTRL_REG_TO_USEC(intrl) ((intrl & ~INTRL_ENA) << 2) + /** * i40e_intrl_usec_to_reg - convert interrupt rate limit to register * @intrl: interrupt rate limit to convert diff --git a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c index 34d898f0adaae3d4f7d9f18a4d5641fb3108baba..c5f8e941f53ed8de2b746b170ada9ec729e2e4ad 100644 --- a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c +++ b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c @@ -1460,7 +1460,7 @@ static int i40e_clean_rx_irq(struct i40e_ring *rx_ring, int budget) return failure ? budget : (int)total_rx_packets; } -static u32 i40e_buildreg_itr(const int type, const u16 itr) +static inline u32 i40e_buildreg_itr(const int type, u16 itr) { u32 val; @@ -1473,10 +1473,17 @@ static u32 i40e_buildreg_itr(const int type, const u16 itr) * xxINT_DYN_CTLx CSR with INTENA_MSK (bit 31) set to 0 will clear * an event in the PBA anyway so we need to rely on the automask * to hold pending events for us until the interrupt is re-enabled + * + * The itr value is reported in microseconds, and the register + * value is recorded in 2 microsecond units. For this reason we + * only need to shift by the interval shift - 1 instead of the + * full value. */ + itr &= I40E_ITR_MASK; + val = I40E_VFINT_DYN_CTLN1_INTENA_MASK | (type << I40E_VFINT_DYN_CTLN1_ITR_INDX_SHIFT) | - (itr << I40E_VFINT_DYN_CTLN1_INTERVAL_SHIFT); + (itr << (I40E_VFINT_DYN_CTLN1_INTERVAL_SHIFT - 1)); return val; } diff --git a/drivers/net/ethernet/intel/i40evf/i40e_txrx.h b/drivers/net/ethernet/intel/i40evf/i40e_txrx.h index 038ed0e2acb712f1d0324415c711faf8d986d621..a4f29722ceff3a3ce202b8ea955de9e0ccaf5b4a 100644 --- a/drivers/net/ethernet/intel/i40evf/i40e_txrx.h +++ b/drivers/net/ethernet/intel/i40evf/i40e_txrx.h @@ -28,31 +28,35 @@ #define _I40E_TXRX_H_ /* Interrupt Throttling and Rate Limiting Goodies */ - -#define I40E_MAX_ITR 0x0FF0 /* reg uses 2 usec resolution */ -#define I40E_MIN_ITR 0x0001 /* reg uses 2 usec resolution */ -#define I40E_ITR_100K 0x0005 -#define I40E_ITR_50K 0x000A -#define I40E_ITR_20K 0x0019 -#define I40E_ITR_18K 0x001B -#define I40E_ITR_8K 0x003E -#define I40E_ITR_4K 0x007A -#define I40E_MAX_INTRL 0x3B /* reg uses 4 usec resolution */ -#define I40E_ITR_RX_DEF (ITR_REG_TO_USEC(I40E_ITR_20K) | \ - I40E_ITR_DYNAMIC) -#define I40E_ITR_TX_DEF (ITR_REG_TO_USEC(I40E_ITR_20K) | \ - I40E_ITR_DYNAMIC) -#define I40E_ITR_DYNAMIC 0x8000 /* use top bit as a flag */ -#define I40E_MIN_INT_RATE 250 /* ~= 1000000 / (I40E_MAX_ITR * 2) */ -#define I40E_MAX_INT_RATE 500000 /* == 1000000 / (I40E_MIN_ITR * 2) */ #define I40E_DEFAULT_IRQ_WORK 256 -#define ITR_TO_REG(setting) ((setting & ~I40E_ITR_DYNAMIC) >> 1) -#define ITR_IS_DYNAMIC(setting) (!!(setting & I40E_ITR_DYNAMIC)) -#define ITR_REG_TO_USEC(itr_reg) (itr_reg << 1) + +/* The datasheet for the X710 and XL710 indicate that the maximum value for + * the ITR is 8160usec which is then called out as 0xFF0 with a 2usec + * resolution. 8160 is 0x1FE0 when written out in hex. So instead of storing + * the register value which is divided by 2 lets use the actual values and + * avoid an excessive amount of translation. + */ +#define I40E_ITR_DYNAMIC 0x8000 /* use top bit as a flag */ +#define I40E_ITR_MASK 0x1FFE /* mask for ITR register value */ +#define I40E_MIN_ITR 2 /* reg uses 2 usec resolution */ +#define I40E_ITR_100K 10 /* all values below must be even */ +#define I40E_ITR_50K 20 +#define I40E_ITR_20K 50 +#define I40E_ITR_18K 60 +#define I40E_ITR_8K 122 +#define I40E_MAX_ITR 8160 /* maximum value as per datasheet */ +#define ITR_TO_REG(setting) ((setting) & ~I40E_ITR_DYNAMIC) +#define ITR_REG_ALIGN(setting) __ALIGN_MASK(setting, ~I40E_ITR_MASK) +#define ITR_IS_DYNAMIC(setting) (!!((setting) & I40E_ITR_DYNAMIC)) + +#define I40E_ITR_RX_DEF (I40E_ITR_20K | I40E_ITR_DYNAMIC) +#define I40E_ITR_TX_DEF (I40E_ITR_20K | I40E_ITR_DYNAMIC) + /* 0x40 is the enable bit for interrupt rate limiting, and must be set if * the value of the rate limit is non-zero */ #define INTRL_ENA BIT(6) +#define I40E_MAX_INTRL 0x3B /* reg uses 4 usec resolution */ #define INTRL_REG_TO_USEC(intrl) ((intrl & ~INTRL_ENA) << 2) #define INTRL_USEC_TO_REG(set) ((set) ? ((set) >> 2) | INTRL_ENA : 0) #define I40E_INTRL_8K 125 /* 8000 ints/sec */ diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_ethtool.c b/drivers/net/ethernet/intel/i40evf/i40evf_ethtool.c index ed5b8ec4d2a2cc92a75d37b8ed26837e4882961e..f5d372576d71d6c42e64f7a42320afdfd6383ea8 100644 --- a/drivers/net/ethernet/intel/i40evf/i40evf_ethtool.c +++ b/drivers/net/ethernet/intel/i40evf/i40evf_ethtool.c @@ -517,8 +517,8 @@ static void i40evf_set_itr_per_queue(struct i40evf_adapter *adapter, struct i40e_hw *hw = &adapter->hw; struct i40e_q_vector *q_vector; - rx_ring->itr_setting = ec->rx_coalesce_usecs; - tx_ring->itr_setting = ec->tx_coalesce_usecs; + rx_ring->itr_setting = ITR_REG_ALIGN(ec->rx_coalesce_usecs); + tx_ring->itr_setting = ITR_REG_ALIGN(ec->tx_coalesce_usecs); rx_ring->itr_setting |= I40E_ITR_DYNAMIC; if (!ec->use_adaptive_rx_coalesce) @@ -563,8 +563,8 @@ static int __i40evf_set_coalesce(struct net_device *netdev, if (ec->rx_coalesce_usecs == 0) { if (ec->use_adaptive_rx_coalesce) netif_info(adapter, drv, netdev, "rx-usecs=0, need to disable adaptive-rx for a complete disable\n"); - } else if ((ec->rx_coalesce_usecs < (I40E_MIN_ITR << 1)) || - (ec->rx_coalesce_usecs > (I40E_MAX_ITR << 1))) { + } else if ((ec->rx_coalesce_usecs < I40E_MIN_ITR) || + (ec->rx_coalesce_usecs > I40E_MAX_ITR)) { netif_info(adapter, drv, netdev, "Invalid value, rx-usecs range is 0-8160\n"); return -EINVAL; } @@ -573,8 +573,8 @@ static int __i40evf_set_coalesce(struct net_device *netdev, if (ec->tx_coalesce_usecs == 0) { if (ec->use_adaptive_tx_coalesce) netif_info(adapter, drv, netdev, "tx-usecs=0, need to disable adaptive-tx for a complete disable\n"); - } else if ((ec->tx_coalesce_usecs < (I40E_MIN_ITR << 1)) || - (ec->tx_coalesce_usecs > (I40E_MAX_ITR << 1))) { + } else if ((ec->tx_coalesce_usecs < I40E_MIN_ITR) || + (ec->tx_coalesce_usecs > I40E_MAX_ITR)) { netif_info(adapter, drv, netdev, "Invalid value, tx-usecs range is 0-8160\n"); return -EINVAL; }