提交 8f1e6723 编写于 作者: A Alan Cox 提交者: Greg Kroah-Hartman

tty: riscom8: switch to the tty_port_open API

Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
上级 44e4909e
......@@ -793,26 +793,21 @@ static void rc_change_speed(struct tty_struct *tty, struct riscom_board *bp,
}
/* Must be called with interrupts enabled */
static int rc_setup_port(struct tty_struct *tty, struct riscom_board *bp,
struct riscom_port *port)
static int rc_activate_port(struct tty_port *port, struct tty_struct *tty)
{
struct riscom_port *rp = container_of(port, struct riscom_port, port);
struct riscom_board *bp = port_Board(rp);
unsigned long flags;
if (port->port.flags & ASYNC_INITIALIZED)
return 0;
if (tty_port_alloc_xmit_buf(&port->port) < 0)
if (tty_port_alloc_xmit_buf(port) < 0)
return -ENOMEM;
spin_lock_irqsave(&riscom_lock, flags);
clear_bit(TTY_IO_ERROR, &tty->flags);
if (port->port.count == 1)
bp->count++;
port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
rc_change_speed(tty, bp, port);
port->port.flags |= ASYNC_INITIALIZED;
rp->xmit_cnt = rp->xmit_head = rp->xmit_tail = 0;
rc_change_speed(tty, bp, rp);
spin_unlock_irqrestore(&riscom_lock, flags);
return 0;
}
......@@ -821,9 +816,6 @@ static int rc_setup_port(struct tty_struct *tty, struct riscom_board *bp,
static void rc_shutdown_port(struct tty_struct *tty,
struct riscom_board *bp, struct riscom_port *port)
{
if (!(port->port.flags & ASYNC_INITIALIZED))
return;
#ifdef RC_REPORT_OVERRUN
printk(KERN_INFO "rc%d: port %d: Total %ld overruns were detected.\n",
board_No(bp), port_No(port), port->overrun);
......@@ -840,11 +832,6 @@ static void rc_shutdown_port(struct tty_struct *tty,
}
#endif
tty_port_free_xmit_buf(&port->port);
if (C_HUPCL(tty)) {
/* Drop DTR */
bp->DTR |= (1u << port_No(port));
rc_out(bp, RC_DTR, bp->DTR);
}
/* Select port */
rc_out(bp, CD180_CAR, port_No(port));
......@@ -856,7 +843,6 @@ static void rc_shutdown_port(struct tty_struct *tty,
rc_out(bp, CD180_IER, port->IER);
set_bit(TTY_IO_ERROR, &tty->flags);
port->port.flags &= ~ASYNC_INITIALIZED;
if (--bp->count < 0) {
printk(KERN_INFO "rc%d: rc_shutdown_port: "
......@@ -889,6 +875,20 @@ static int carrier_raised(struct tty_port *port)
return CD;
}
static void dtr_rts(struct tty_port *port, int onoff)
{
struct riscom_port *p = container_of(port, struct riscom_port, port);
struct riscom_board *bp = port_Board(p);
unsigned long flags;
spin_lock_irqsave(&riscom_lock, flags);
bp->DTR &= ~(1u << port_No(p));
if (onoff == 0)
bp->DTR |= (1u << port_No(p));
rc_out(bp, RC_DTR, bp->DTR);
spin_unlock_irqrestore(&riscom_lock, flags);
}
static int rc_open(struct tty_struct *tty, struct file *filp)
{
int board;
......@@ -909,14 +909,7 @@ static int rc_open(struct tty_struct *tty, struct file *filp)
if (error)
return error;
port->port.count++;
tty->driver_data = port;
tty_port_tty_set(&port->port, tty);
error = rc_setup_port(tty, bp, port);
if (error == 0)
error = tty_port_block_til_ready(&port->port, tty, filp);
return error;
return tty_port_open(&port->port, tty, filp);
}
static void rc_flush_buffer(struct tty_struct *tty)
......@@ -950,7 +943,7 @@ static void rc_close_port(struct tty_port *port)
spin_lock_irqsave(&riscom_lock, flags);
rp->IER &= ~IER_RXD;
if (port->flags & ASYNC_INITIALIZED) {
rp->IER &= ~IER_TXRDY;
rp->IER |= IER_TXEMPTY;
rc_out(bp, CD180_CAR, port_No(rp));
......@@ -968,7 +961,6 @@ static void rc_close_port(struct tty_port *port)
if (time_after(jiffies, timeout))
break;
}
}
rc_shutdown_port(port->tty, bp, rp);
spin_unlock_irqrestore(&riscom_lock, flags);
}
......@@ -1354,7 +1346,6 @@ static void rc_hangup(struct tty_struct *tty)
if (rc_paranoia_check(port, tty->name, "rc_hangup"))
return;
rc_shutdown_port(tty, port_Board(port), port);
tty_port_hangup(&port->port);
}
......@@ -1401,7 +1392,9 @@ static const struct tty_operations riscom_ops = {
static const struct tty_port_operations riscom_port_ops = {
.carrier_raised = carrier_raised,
.dtr_rts = dtr_rts,
.shutdown = rc_close_port,
.activate = rc_activate_port,
};
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册