iio: mxs-lradc: move STMP reset out of ADC init

This patch moves the STMP reset out of ADC init function so as to remove
the possiblity of an error return which will be necessary for PM ops support
patches to follow.
Signed-off-by: NStefan Wahren <stefan.wahren@i2se.com>
Tested-by: NMarek Vasut <marex@denx.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

drivers/iio/adc/mxs-lradc.c

@@ -1487,18 +1487,13 @@ static const struct iio_chan_spec mx28_lradc_chan_spec[] = {
 	MXS_ADC_CHAN(15, IIO_VOLTAGE, "VDD5V"),
 };
 
-static int mxs_lradc_hw_init(struct mxs_lradc *lradc)
+static void mxs_lradc_hw_init(struct mxs_lradc *lradc)
 {
 	/* The ADC always uses DELAY CHANNEL 0. */
 	const u32 adc_cfg =
 		(1 << (LRADC_DELAY_TRIGGER_DELAYS_OFFSET + 0)) |
 		(LRADC_DELAY_TIMER_PER << LRADC_DELAY_DELAY_OFFSET);
 
-	int ret = stmp_reset_block(lradc->base);
-
-	if (ret)
-		return ret;
-
 	/* Configure DELAY CHANNEL 0 for generic ADC sampling. */
 	mxs_lradc_reg_wrt(lradc, adc_cfg, LRADC_DELAY(0));
 
@@ -1509,8 +1504,6 @@ static int mxs_lradc_hw_init(struct mxs_lradc *lradc)
 
 	/* Start internal temperature sensing. */
 	mxs_lradc_reg_wrt(lradc, 0, LRADC_CTRL2);
-
-	return 0;
 }
 
 static void mxs_lradc_hw_stop(struct mxs_lradc *lradc)
@@ -1710,11 +1703,13 @@ static int mxs_lradc_probe(struct platform_device *pdev)
 		}
 	}
 
-	/* Configure the hardware. */
-	ret = mxs_lradc_hw_init(lradc);
+	ret = stmp_reset_block(lradc->base);
 	if (ret)
 		goto err_dev;
 
+	/* Configure the hardware. */
+	mxs_lradc_hw_init(lradc);
+
 	/* Register the touchscreen input device. */
 	if (touch_ret == 0) {
 		ret = mxs_lradc_ts_register(lradc);