提交 7d8e967f 编写于 作者: I Imre Deak 提交者: Tony Lindgren

ARM: OMAP2: 2430SDP: Add FB support to board file

Based on an earlier patch by Hunyue Yau <hyau@mvista.com> with
board-*.c changes split to avoid conflicts with other device updates.

Cc: linux-fbdev-devel@lists.sourceforge.net
Signed-off-by: NHunyue Yau <hyau@mvista.com>
Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: NImre Deak <imre.deak@nokia.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
上级 1a48e157
......@@ -41,6 +41,7 @@
#include "mmc-twl4030.h"
#define SDP2430_CS0_BASE 0x04000000
#define SECONDARY_LCD_GPIO 147
static struct mtd_partition sdp2430_partitions[] = {
/* bootloader (U-Boot, etc) in first sector */
......@@ -96,8 +97,18 @@ static struct platform_device sdp2430_flash_device = {
.resource = &sdp2430_flash_resource,
};
static struct platform_device sdp2430_lcd_device = {
.name = "sdp2430_lcd",
.id = -1,
};
static struct platform_device *sdp2430_devices[] __initdata = {
&sdp2430_flash_device,
&sdp2430_lcd_device,
};
static struct omap_lcd_config sdp2430_lcd_config __initdata = {
.ctrl_name = "internal",
};
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91x_MODULE)
......@@ -141,6 +152,7 @@ static struct omap_uart_config sdp2430_uart_config __initdata = {
static struct omap_board_config_kernel sdp2430_config[] = {
{OMAP_TAG_UART, &sdp2430_uart_config},
{OMAP_TAG_LCD, &sdp2430_lcd_config},
};
......@@ -188,6 +200,8 @@ static struct twl4030_hsmmc_info mmc[] __initdata = {
static void __init omap_2430sdp_init(void)
{
int ret;
omap2430_i2c_init();
platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
......@@ -197,6 +211,11 @@ static void __init omap_2430sdp_init(void)
twl4030_mmc_init(mmc);
usb_musb_init();
board_smc91x_init();
/* Turn off secondary LCD backlight */
ret = gpio_request(SECONDARY_LCD_GPIO, "Secondary LCD backlight");
if (ret == 0)
gpio_direction_output(SECONDARY_LCD_GPIO, 0);
}
static void __init omap_2430sdp_map_io(void)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册