diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index c4178778e7fd01d65b99b2279aecad0727701770..17fc60e32443082da684a250e9e0b6fbecb34bbf 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -34,6 +34,7 @@ parameter is applicable: ALSA ALSA sound support is enabled. APIC APIC support is enabled. APM Advanced Power Management support is enabled. + AVR32 AVR32 architecture is enabled. AX25 Appropriate AX.25 support is enabled. BLACKFIN Blackfin architecture is enabled. DRM Direct Rendering Management support is enabled. @@ -1123,6 +1124,10 @@ and is between 256 and 4096 characters. It is defined in the file of returning the full 64-bit number. The default is to return 64-bit inode numbers. + nmi_debug= [KNL,AVR32] Specify one or more actions to take + when a NMI is triggered. + Format: [state][,regs][,debounce][,die] + nmi_watchdog= [KNL,BUGS=X86-32] Debugging features for SMP kernels no387 [BUGS=X86-32] Tells the kernel to use the 387 maths diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig index b77abce10c7aa895689f6210944d0d5b780bba83..e34e2c9c94cb5b678eeae91929682ab081c7e661 100644 --- a/arch/avr32/Kconfig +++ b/arch/avr32/Kconfig @@ -54,6 +54,9 @@ config ARCH_HAS_ILOG2_U32 config ARCH_HAS_ILOG2_U64 def_bool n +config ARCH_SUPPORTS_OPROFILE + def_bool y + config GENERIC_HWEIGHT def_bool y @@ -81,19 +84,23 @@ config PLATFORM_AT32AP select MMU select PERFORMANCE_COUNTERS -choice - prompt "AVR32 CPU type" - default CPU_AT32AP7000 +# +# CPU types +# -config CPU_AT32AP7000 - bool "AT32AP7000" +# AP7000 derivatives +config CPU_AT32AP700X + bool select PLATFORM_AT32AP -endchoice - -# -# CPU Daughterboards for ATSTK1000 -config BOARD_ATSTK1002 +config CPU_AT32AP7000 + bool + select CPU_AT32AP700X +config CPU_AT32AP7001 + bool + select CPU_AT32AP700X +config CPU_AT32AP7002 bool + select CPU_AT32AP700X choice prompt "AVR32 board type" @@ -101,10 +108,10 @@ choice config BOARD_ATSTK1000 bool "ATSTK1000 evaluation board" - select BOARD_ATSTK1002 if CPU_AT32AP7000 config BOARD_ATNGW100 bool "ATNGW100 Network Gateway" + select CPU_AT32AP7000 endchoice if BOARD_ATSTK1000 @@ -123,15 +130,15 @@ source "arch/avr32/mach-at32ap/Kconfig" config LOAD_ADDRESS hex - default 0x10000000 if LOADER_U_BOOT=y && CPU_AT32AP7000=y + default 0x10000000 if LOADER_U_BOOT=y && CPU_AT32AP700X=y config ENTRY_ADDRESS hex - default 0x90000000 if LOADER_U_BOOT=y && CPU_AT32AP7000=y + default 0x90000000 if LOADER_U_BOOT=y && CPU_AT32AP700X=y config PHYS_OFFSET hex - default 0x10000000 if CPU_AT32AP7000=y + default 0x10000000 if CPU_AT32AP700X=y source "kernel/Kconfig.preempt" @@ -163,6 +170,16 @@ config OWNERSHIP_TRACE enabling Nexus-compliant debuggers to keep track of the PID of the currently executing task. +config NMI_DEBUGGING + bool "NMI Debugging" + default n + help + Say Y here and pass the nmi_debug command-line parameter to + the kernel to turn on NMI debugging. Depending on the value + of the nmi_debug option, various pieces of information will + be dumped to the console when a Non-Maskable Interrupt + happens. + # FPU emulation goes here source "kernel/Kconfig.hz" @@ -219,6 +236,8 @@ source "drivers/Kconfig" source "fs/Kconfig" +source "kernel/Kconfig.instrumentation" + source "arch/avr32/Kconfig.debug" source "security/Kconfig" diff --git a/arch/avr32/Kconfig.debug b/arch/avr32/Kconfig.debug index 64ace00fe6cb3b3bb1b9306cde6a7d8017cb0e7a..2283933a9a93eef48b2de37aefe944540af03ff4 100644 --- a/arch/avr32/Kconfig.debug +++ b/arch/avr32/Kconfig.debug @@ -6,14 +6,4 @@ config TRACE_IRQFLAGS_SUPPORT source "lib/Kconfig.debug" -config KPROBES - bool "Kprobes" - depends on DEBUG_KERNEL - help - Kprobes allows you to trap at almost any kernel address and - execute a callback function. register_kprobe() establishes - a probepoint and specifies the callback. Kprobes is useful - for kernel debugging, non-intrusive instrumentation and testing. - If in doubt, say "N". - endmenu diff --git a/arch/avr32/Makefile b/arch/avr32/Makefile index 87918647be6d6ed97dba60963f7995c134012d47..17a3529341ddef62eb5c6129a84e25622a280c4a 100644 --- a/arch/avr32/Makefile +++ b/arch/avr32/Makefile @@ -16,7 +16,7 @@ KBUILD_AFLAGS += -mrelax -mno-pic CFLAGS_MODULE += -mno-relax LDFLAGS_vmlinux += --relax -cpuflags-$(CONFIG_CPU_AT32AP7000) += -mcpu=ap7000 +cpuflags-$(CONFIG_PLATFORM_AT32AP) += -march=ap KBUILD_CFLAGS += $(cpuflags-y) KBUILD_AFLAGS += $(cpuflags-y) @@ -31,6 +31,7 @@ core-$(CONFIG_BOARD_ATNGW100) += arch/avr32/boards/atngw100/ core-$(CONFIG_LOADER_U_BOOT) += arch/avr32/boot/u-boot/ core-y += arch/avr32/kernel/ core-y += arch/avr32/mm/ +drivers-$(CONFIG_OPROFILE) += arch/avr32/oprofile/ libs-y += arch/avr32/lib/ archincdir-$(CONFIG_PLATFORM_AT32AP) := arch-at32ap diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c index 52987c81d668d1c5825f3f209058e99080ab462e..a398be2849666bf974696ba383800df885ee3cf7 100644 --- a/arch/avr32/boards/atngw100/setup.c +++ b/arch/avr32/boards/atngw100/setup.c @@ -20,7 +20,7 @@ #include #include -#include +#include #include #include #include diff --git a/arch/avr32/boards/atstk1000/Kconfig b/arch/avr32/boards/atstk1000/Kconfig index 718578f640691c2e9b692c1b98acf53e6d7b5ca1..af90b00100fd0d96f58df404411e00affce02bcd 100644 --- a/arch/avr32/boards/atstk1000/Kconfig +++ b/arch/avr32/boards/atstk1000/Kconfig @@ -1,34 +1,53 @@ # STK1000 customization -if BOARD_ATSTK1002 +if BOARD_ATSTK1000 -config BOARD_ATSTK1002_CUSTOM - bool "Non-default STK-1002 jumper settings" +choice + prompt "ATSTK1000 CPU daughterboard type" + default BOARD_ATSTK1002 + +config BOARD_ATSTK1002 + bool "ATSTK1002" + select CPU_AT32AP7000 + +config BOARD_ATSTK1003 + bool "ATSTK1003" + select CPU_AT32AP7001 + +config BOARD_ATSTK1004 + bool "ATSTK1004" + select CPU_AT32AP7002 + +endchoice + + +config BOARD_ATSTK100X_CUSTOM + bool "Non-default STK1002/STK1003/STK1004 jumper settings" help You will normally leave the jumpers on the CPU card at their default settings. If you need to use certain peripherals, you will need to change some of those jumpers. -if BOARD_ATSTK1002_CUSTOM +if BOARD_ATSTK100X_CUSTOM -config BOARD_ATSTK1002_SW1_CUSTOM +config BOARD_ATSTK100X_SW1_CUSTOM bool "SW1: use SSC1 (not SPI0)" help This also prevents using the external DAC as an audio interface, and means you can't initialize the on-board QVGA display. -config BOARD_ATSTK1002_SW2_CUSTOM +config BOARD_ATSTK100X_SW2_CUSTOM bool "SW2: use IRDA or TIMER0 (not UART-A, MMC/SD, and PS2-A)" help If you change this you'll want an updated boot loader putting the console on UART-C not UART-A. -config BOARD_ATSTK1002_SW3_CUSTOM +config BOARD_ATSTK100X_SW3_CUSTOM bool "SW3: use TIMER1 (not SSC0 and GCLK)" help This also prevents using the external DAC as an audio interface. -config BOARD_ATSTK1002_SW4_CUSTOM +config BOARD_ATSTK100X_SW4_CUSTOM bool "SW4: use ISI/Camera (not GPIOs, SPI1, and PS2-B)" help To use the camera interface you'll need a custom card (on the @@ -36,27 +55,29 @@ config BOARD_ATSTK1002_SW4_CUSTOM config BOARD_ATSTK1002_SW5_CUSTOM bool "SW5: use MACB1 (not LCDC)" + depends on BOARD_ATSTK1002 config BOARD_ATSTK1002_SW6_CUSTOM bool "SW6: more GPIOs (not MACB0)" + depends on BOARD_ATSTK1002 endif # custom -config BOARD_ATSTK1002_SPI1 +config BOARD_ATSTK100X_SPI1 bool "Configure SPI1 controller" - depends on !BOARD_ATSTK1002_SW4_CUSTOM + depends on !BOARD_ATSTK100X_SW4_CUSTOM help All the signals for the second SPI controller are available on GPIO lines and accessed through the J1 jumper block. Say "y" here to configure that SPI controller. -config BOARD_ATSTK1002_J2_LED +config BOARD_ATSTK1000_J2_LED bool - default BOARD_ATSTK1002_J2_LED8 || BOARD_ATSTK1002_J2_RGB + default BOARD_ATSTK1000_J2_LED8 || BOARD_ATSTK1000_J2_RGB choice prompt "LEDs connected to J2:" - depends on LEDS_GPIO && !BOARD_ATSTK1002_SW4_CUSTOM + depends on LEDS_GPIO && !BOARD_ATSTK100X_SW4_CUSTOM optional help Select this if you have jumpered the J2 jumper block to the @@ -64,16 +85,21 @@ choice IDC cable. A default "heartbeat" trigger is provided, but you can of course override this. -config BOARD_ATSTK1002_J2_LED8 +config BOARD_ATSTK1000_J2_LED8 bool "LED0..LED7" help Select this if J2 is jumpered to LED0..LED7 amber leds. -config BOARD_ATSTK1002_J2_RGB +config BOARD_ATSTK1000_J2_RGB bool "RGB leds" help Select this if J2 is jumpered to the RGB leds. endchoice -endif # stk 1002 +config BOARD_ATSTK1000_EXTDAC + bool + depends on !BOARD_ATSTK100X_SW1_CUSTOM && !BOARD_ATSTK100X_SW3_CUSTOM + default y + +endif # stk 1000 diff --git a/arch/avr32/boards/atstk1000/Makefile b/arch/avr32/boards/atstk1000/Makefile index 8e0992201bb98b931d9578feeac8a05d5a9ae828..beead86462e8a6a7f8f7797e746be176268394ba 100644 --- a/arch/avr32/boards/atstk1000/Makefile +++ b/arch/avr32/boards/atstk1000/Makefile @@ -1,2 +1,4 @@ obj-y += setup.o flash.o obj-$(CONFIG_BOARD_ATSTK1002) += atstk1002.o +obj-$(CONFIG_BOARD_ATSTK1003) += atstk1003.o +obj-$(CONFIG_BOARD_ATSTK1004) += atstk1004.o diff --git a/arch/avr32/boards/atstk1000/atstk1000.h b/arch/avr32/boards/atstk1000/atstk1000.h index 9a49ed036b72bd9660aca6f5ef5153fd6603ae28..9392d3252865a6886025167fe151e7356acf8f64 100644 --- a/arch/avr32/boards/atstk1000/atstk1000.h +++ b/arch/avr32/boards/atstk1000/atstk1000.h @@ -12,4 +12,6 @@ extern struct atmel_lcdfb_info atstk1000_lcdc_data; +void atstk1000_setup_j2_leds(void); + #endif /* __ARCH_AVR32_BOARDS_ATSTK1000_ATSTK1000_H */ diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c index 5be0d13f4b03c53d8d843d9a698b885361d98bc0..000eb4220a12619b4e9b9922f5ed7d9e4c958064 100644 --- a/arch/avr32/boards/atstk1000/atstk1002.c +++ b/arch/avr32/boards/atstk1000/atstk1002.c @@ -11,7 +11,6 @@ #include #include #include -#include #include #include #include @@ -22,7 +21,7 @@ #include #include -#include +#include #include #include #include @@ -49,18 +48,16 @@ static struct eth_platform_data __initdata eth_data[2] = { }, }; -#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM -#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM +#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC static struct at73c213_board_info at73c213_data = { .ssc_id = 0, .shortname = "AVR32 STK1000 external DAC", }; #endif -#endif -#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM +#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM static struct spi_board_info spi0_board_info[] __initdata = { -#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM +#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC { /* AT73C213 */ .modalias = "at73c213", @@ -80,7 +77,7 @@ static struct spi_board_info spi0_board_info[] __initdata = { }; #endif -#ifdef CONFIG_BOARD_ATSTK1002_SPI1 +#ifdef CONFIG_BOARD_ATSTK100X_SPI1 static struct spi_board_info spi1_board_info[] __initdata = { { /* patch in custom entries here */ } }; @@ -141,68 +138,8 @@ static void __init set_hw_addr(struct platform_device *pdev) clk_put(pclk); } -#ifdef CONFIG_BOARD_ATSTK1002_J2_LED - -static struct gpio_led stk_j2_led[] = { -#ifdef CONFIG_BOARD_ATSTK1002_J2_LED8 -#define LEDSTRING "J2 jumpered to LED8" - { .name = "led0:amber", .gpio = GPIO_PIN_PB( 8), }, - { .name = "led1:amber", .gpio = GPIO_PIN_PB( 9), }, - { .name = "led2:amber", .gpio = GPIO_PIN_PB(10), }, - { .name = "led3:amber", .gpio = GPIO_PIN_PB(13), }, - { .name = "led4:amber", .gpio = GPIO_PIN_PB(14), }, - { .name = "led5:amber", .gpio = GPIO_PIN_PB(15), }, - { .name = "led6:amber", .gpio = GPIO_PIN_PB(16), }, - { .name = "led7:amber", .gpio = GPIO_PIN_PB(30), - .default_trigger = "heartbeat", }, -#else /* RGB */ -#define LEDSTRING "J2 jumpered to RGB LEDs" - { .name = "r1:red", .gpio = GPIO_PIN_PB( 8), }, - { .name = "g1:green", .gpio = GPIO_PIN_PB(10), }, - { .name = "b1:blue", .gpio = GPIO_PIN_PB(14), }, - - { .name = "r2:red", .gpio = GPIO_PIN_PB( 9), - .default_trigger = "heartbeat", }, - { .name = "g2:green", .gpio = GPIO_PIN_PB(13), }, - { .name = "b2:blue", .gpio = GPIO_PIN_PB(15), - .default_trigger = "heartbeat", }, - /* PB16, PB30 unused */ -#endif -}; - -static struct gpio_led_platform_data stk_j2_led_data = { - .num_leds = ARRAY_SIZE(stk_j2_led), - .leds = stk_j2_led, -}; - -static struct platform_device stk_j2_led_dev = { - .name = "leds-gpio", - .id = 2, /* gpio block J2 */ - .dev = { - .platform_data = &stk_j2_led_data, - }, -}; - -static void setup_j2_leds(void) -{ - unsigned i; - - for (i = 0; i < ARRAY_SIZE(stk_j2_led); i++) - at32_select_gpio(stk_j2_led[i].gpio, AT32_GPIOF_OUTPUT); - - printk("STK1002: " LEDSTRING "\n"); - platform_device_register(&stk_j2_led_dev); -} - -#else -static void setup_j2_leds(void) -{ -} -#endif - -#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM -#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM -static void __init at73c213_set_clk(struct at73c213_board_info *info) +#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC +static void __init atstk1002_setup_extdac(void) { struct clk *gclk; struct clk *pll; @@ -220,7 +157,7 @@ static void __init at73c213_set_clk(struct at73c213_board_info *info) } at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0); - info->dac_clk = gclk; + at73c213_data.dac_clk = gclk; err_set_clk: clk_put(pll); @@ -229,12 +166,16 @@ static void __init at73c213_set_clk(struct at73c213_board_info *info) err_gclk: return; } -#endif -#endif +#else +static void __init atstk1002_setup_extdac(void) +{ + +} +#endif /* CONFIG_BOARD_ATSTK1000_EXTDAC */ void __init setup_board(void) { -#ifdef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM +#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM at32_map_usart(0, 1); /* USART 0/B: /dev/ttyS1, IRDA */ #else at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */ @@ -271,7 +212,7 @@ static int __init atstk1002_init(void) at32_add_system_devices(); -#ifdef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM +#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM at32_add_device_usart(1); #else at32_add_device_usart(0); @@ -281,10 +222,10 @@ static int __init atstk1002_init(void) #ifndef CONFIG_BOARD_ATSTK1002_SW6_CUSTOM set_hw_addr(at32_add_device_eth(0, ð_data[0])); #endif -#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM +#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info)); #endif -#ifdef CONFIG_BOARD_ATSTK1002_SPI1 +#ifdef CONFIG_BOARD_ATSTK100X_SPI1 at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info)); #endif #ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM @@ -294,17 +235,12 @@ static int __init atstk1002_init(void) fbmem_start, fbmem_size); #endif at32_add_device_usba(0, NULL); -#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM +#ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM at32_add_device_ssc(0, ATMEL_SSC_TX); #endif - setup_j2_leds(); - -#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM -#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM - at73c213_set_clk(&at73c213_data); -#endif -#endif + atstk1000_setup_j2_leds(); + atstk1002_setup_extdac(); return 0; } diff --git a/arch/avr32/boards/atstk1000/atstk1003.c b/arch/avr32/boards/atstk1000/atstk1003.c new file mode 100644 index 0000000000000000000000000000000000000000..a0b223df35a253ed1afa45106864dc47ade6b744 --- /dev/null +++ b/arch/avr32/boards/atstk1000/atstk1003.c @@ -0,0 +1,162 @@ +/* + * ATSTK1003 daughterboard-specific init code + * + * Copyright (C) 2007 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include + +#include +#include +#include +#include + +#include "atstk1000.h" + +#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC +static struct at73c213_board_info at73c213_data = { + .ssc_id = 0, + .shortname = "AVR32 STK1000 external DAC", +}; +#endif + +#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM +static struct spi_board_info spi0_board_info[] __initdata = { +#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC + { + /* AT73C213 */ + .modalias = "at73c213", + .max_speed_hz = 200000, + .chip_select = 0, + .mode = SPI_MODE_1, + .platform_data = &at73c213_data, + }, +#endif + /* + * We can control the LTV350QV LCD panel, but it isn't much + * point since we don't have an LCD controller... + */ +}; +#endif + +#ifdef CONFIG_BOARD_ATSTK100X_SPI1 +static struct spi_board_info spi1_board_info[] __initdata = { { + /* patch in custom entries here */ +} }; +#endif + +#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC +static void __init atstk1003_setup_extdac(void) +{ + struct clk *gclk; + struct clk *pll; + + gclk = clk_get(NULL, "gclk0"); + if (IS_ERR(gclk)) + goto err_gclk; + pll = clk_get(NULL, "pll0"); + if (IS_ERR(pll)) + goto err_pll; + + if (clk_set_parent(gclk, pll)) { + pr_debug("STK1000: failed to set pll0 as parent for DAC clock\n"); + goto err_set_clk; + } + + at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0); + at73c213_data.dac_clk = gclk; + +err_set_clk: + clk_put(pll); +err_pll: + clk_put(gclk); +err_gclk: + return; +} +#else +static void __init atstk1003_setup_extdac(void) +{ + +} +#endif /* CONFIG_BOARD_ATSTK1000_EXTDAC */ + +void __init setup_board(void) +{ +#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM + at32_map_usart(0, 1); /* USART 0/B: /dev/ttyS1, IRDA */ +#else + at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */ +#endif + /* USART 2/unused: expansion connector */ + at32_map_usart(3, 2); /* USART 3/C: /dev/ttyS2, DB9 */ + + at32_setup_serial_console(0); +} + +static int __init atstk1003_init(void) +{ + /* + * ATSTK1000 uses 32-bit SDRAM interface. Reserve the + * SDRAM-specific pins so that nobody messes with them. + */ + at32_reserve_pin(GPIO_PIN_PE(0)); /* DATA[16] */ + at32_reserve_pin(GPIO_PIN_PE(1)); /* DATA[17] */ + at32_reserve_pin(GPIO_PIN_PE(2)); /* DATA[18] */ + at32_reserve_pin(GPIO_PIN_PE(3)); /* DATA[19] */ + at32_reserve_pin(GPIO_PIN_PE(4)); /* DATA[20] */ + at32_reserve_pin(GPIO_PIN_PE(5)); /* DATA[21] */ + at32_reserve_pin(GPIO_PIN_PE(6)); /* DATA[22] */ + at32_reserve_pin(GPIO_PIN_PE(7)); /* DATA[23] */ + at32_reserve_pin(GPIO_PIN_PE(8)); /* DATA[24] */ + at32_reserve_pin(GPIO_PIN_PE(9)); /* DATA[25] */ + at32_reserve_pin(GPIO_PIN_PE(10)); /* DATA[26] */ + at32_reserve_pin(GPIO_PIN_PE(11)); /* DATA[27] */ + at32_reserve_pin(GPIO_PIN_PE(12)); /* DATA[28] */ + at32_reserve_pin(GPIO_PIN_PE(13)); /* DATA[29] */ + at32_reserve_pin(GPIO_PIN_PE(14)); /* DATA[30] */ + at32_reserve_pin(GPIO_PIN_PE(15)); /* DATA[31] */ + at32_reserve_pin(GPIO_PIN_PE(26)); /* SDCS */ + + at32_add_system_devices(); + +#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM + at32_add_device_usart(1); +#else + at32_add_device_usart(0); +#endif + at32_add_device_usart(2); + +#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM + at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info)); +#endif +#ifdef CONFIG_BOARD_ATSTK100X_SPI1 + at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info)); +#endif +#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM + at32_add_device_mci(0); +#endif + at32_add_device_usba(0, NULL); +#ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM + at32_add_device_ssc(0, ATMEL_SSC_TX); +#endif + + atstk1000_setup_j2_leds(); + atstk1003_setup_extdac(); + + return 0; +} +postcore_initcall(atstk1003_init); diff --git a/arch/avr32/boards/atstk1000/atstk1004.c b/arch/avr32/boards/atstk1000/atstk1004.c new file mode 100644 index 0000000000000000000000000000000000000000..5a77030e07a091a8cf22bfa1b1d52867f025dc50 --- /dev/null +++ b/arch/avr32/boards/atstk1000/atstk1004.c @@ -0,0 +1,147 @@ +/* + * ATSTK1003 daughterboard-specific init code + * + * Copyright (C) 2007 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include