提交 6807cf65 编写于 作者: J Juergen Gross

x86/xen: use capabilities instead of fake cpuid values for xsave

When running as pv domain xen_cpuid() is being used instead of
native_cpuid(). In xen_cpuid() the xsave feature availability is
indicated by special casing the related cpuid leaf.

Instead of delivering fake cpuid values set or clear the cpu
capability bits for xsave instead.
Signed-off-by: NJuergen Gross <jgross@suse.com>
Reviewed-by: NAndrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: NJuergen Gross <jgross@suse.com>
上级 e657fccb
......@@ -165,8 +165,6 @@ xen_running_on_version_or_later(unsigned int major, unsigned int minor)
return false;
}
static __read_mostly unsigned int cpuid_leaf1_ecx_mask = ~0;
static __read_mostly unsigned int cpuid_leaf5_ecx_val;
static __read_mostly unsigned int cpuid_leaf5_edx_val;
......@@ -174,16 +172,12 @@ static void xen_cpuid(unsigned int *ax, unsigned int *bx,
unsigned int *cx, unsigned int *dx)
{
unsigned maskebx = ~0;
unsigned maskecx = ~0;
/*
* Mask out inconvenient features, to try and disable as many
* unsupported kernel subsystems as possible.
*/
switch (*ax) {
case 1:
maskecx = cpuid_leaf1_ecx_mask;
break;
case CPUID_MWAIT_LEAF:
/* Synthesize the values.. */
*ax = 0;
......@@ -206,7 +200,6 @@ static void xen_cpuid(unsigned int *ax, unsigned int *bx,
: "0" (*ax), "2" (*cx));
*bx &= maskebx;
*cx &= maskecx;
}
STACK_FRAME_NON_STANDARD(xen_cpuid); /* XEN_EMULATE_PREFIX */
......@@ -281,22 +274,29 @@ static bool __init xen_check_mwait(void)
return false;
#endif
}
static void __init xen_init_cpuid_mask(void)
{
unsigned int ax, bx, cx, dx;
unsigned int xsave_mask;
ax = 1;
cx = 0;
cpuid(1, &ax, &bx, &cx, &dx);
xsave_mask =
(1 << (X86_FEATURE_XSAVE % 32)) |
(1 << (X86_FEATURE_OSXSAVE % 32));
static bool __init xen_check_xsave(void)
{
unsigned int err, eax, edx;
/* Xen will set CR4.OSXSAVE if supported and not disabled by force */
if ((cx & xsave_mask) != xsave_mask)
cpuid_leaf1_ecx_mask &= ~xsave_mask; /* disable XSAVE & OSXSAVE */
/*
* Xen 4.0 and older accidentally leaked the host XSAVE flag into guest
* view, despite not being able to support guests using the
* functionality. Probe for the actual availability of XSAVE by seeing
* whether xgetbv executes successfully or raises #UD.
*/
asm volatile("1: .byte 0x0f,0x01,0xd0\n\t" /* xgetbv */
"xor %[err], %[err]\n"
"2:\n\t"
".pushsection .fixup,\"ax\"\n\t"
"3: movl $1,%[err]\n\t"
"jmp 2b\n\t"
".popsection\n\t"
_ASM_EXTABLE(1b, 3b)
: [err] "=r" (err), "=a" (eax), "=d" (edx)
: "c" (0));
return err == 0;
}
static void __init xen_init_capabilities(void)
......@@ -316,6 +316,14 @@ static void __init xen_init_capabilities(void)
setup_force_cpu_cap(X86_FEATURE_MWAIT);
else
setup_clear_cpu_cap(X86_FEATURE_MWAIT);
if (xen_check_xsave()) {
setup_force_cpu_cap(X86_FEATURE_XSAVE);
setup_force_cpu_cap(X86_FEATURE_OSXSAVE);
} else {
setup_clear_cpu_cap(X86_FEATURE_XSAVE);
setup_clear_cpu_cap(X86_FEATURE_OSXSAVE);
}
}
static void xen_set_debugreg(int reg, unsigned long val)
......@@ -1308,7 +1316,6 @@ asmlinkage __visible void __init xen_start_kernel(void)
xen_setup_gdt(0);
xen_init_irq_ops();
xen_init_cpuid_mask();
xen_init_capabilities();
#ifdef CONFIG_X86_LOCAL_APIC
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册