提交 6067aaea 编写于 作者: J Jesse Barnes 提交者: Keith Packard

drm/i915: split clock gating init into per-chipset functions

This helps contain the mess to init_display() instead.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: NKeith Packard <keithp@keithp.com>
Signed-off-by: NKeith Packard <keithp@keithp.com>
上级 90711d50
......@@ -209,12 +209,12 @@ struct drm_i915_display_funcs {
int x, int y,
struct drm_framebuffer *old_fb);
void (*fdi_link_train)(struct drm_crtc *crtc);
void (*init_clock_gating)(struct drm_device *dev);
/* clock updates for mode set */
/* cursor updates */
/* render clock increase/decrease */
/* display clock increase/decrease */
/* pll clock increase/decrease */
/* clock gating init */
};
struct intel_device_info {
......
......@@ -864,7 +864,7 @@ int i915_restore_state(struct drm_device *dev)
}
/* Clock gating state */
intel_enable_clock_gating(dev);
dev_priv->display.init_clock_gating(dev);
if (IS_IRONLAKE_M(dev)) {
ironlake_enable_drps(dev);
......
......@@ -7211,161 +7211,194 @@ void gen6_enable_rps(struct drm_i915_private *dev_priv)
mutex_unlock(&dev_priv->dev->struct_mutex);
}
void intel_enable_clock_gating(struct drm_device *dev)
static void ironlake_init_clock_gating(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE;
/* Required for FBC */
dspclk_gate |= DPFCUNIT_CLOCK_GATE_DISABLE |
DPFCRUNIT_CLOCK_GATE_DISABLE |
DPFDUNIT_CLOCK_GATE_DISABLE;
/* Required for CxSR */
dspclk_gate |= DPARBUNIT_CLOCK_GATE_DISABLE;
I915_WRITE(PCH_3DCGDIS0,
MARIUNIT_CLOCK_GATE_DISABLE |
SVSMUNIT_CLOCK_GATE_DISABLE);
I915_WRITE(PCH_3DCGDIS1,
VFMUNIT_CLOCK_GATE_DISABLE);
I915_WRITE(PCH_DSPCLK_GATE_D, dspclk_gate);
/*
* On Ibex Peak and Cougar Point, we need to disable clock
* gating for the panel power sequencer or it will fail to
* start up when no ports are active.
*/
I915_WRITE(SOUTH_DSPCLK_GATE_D, PCH_DPLSUNIT_CLOCK_GATE_DISABLE);
/*
* According to the spec the following bits should be set in
* order to enable memory self-refresh
* The bit 22/21 of 0x42004
* The bit 5 of 0x42020
* The bit 15 of 0x45000
*/
I915_WRITE(ILK_DISPLAY_CHICKEN2,
(I915_READ(ILK_DISPLAY_CHICKEN2) |
ILK_DPARB_GATE | ILK_VSDPFD_FULL));
I915_WRITE(ILK_DSPCLK_GATE,
(I915_READ(ILK_DSPCLK_GATE) |
ILK_DPARB_CLK_GATE));
I915_WRITE(DISP_ARB_CTL,
(I915_READ(DISP_ARB_CTL) |
DISP_FBC_WM_DIS));
I915_WRITE(WM3_LP_ILK, 0);
I915_WRITE(WM2_LP_ILK, 0);
I915_WRITE(WM1_LP_ILK, 0);
/*
* Based on the document from hardware guys the following bits
* should be set unconditionally in order to enable FBC.
* The bit 22 of 0x42000
* The bit 22 of 0x42004
* The bit 7,8,9 of 0x42020.
*/
if (IS_IRONLAKE_M(dev)) {
I915_WRITE(ILK_DISPLAY_CHICKEN1,
I915_READ(ILK_DISPLAY_CHICKEN1) |
ILK_FBCQ_DIS);
I915_WRITE(ILK_DISPLAY_CHICKEN2,
I915_READ(ILK_DISPLAY_CHICKEN2) |
ILK_DPARB_GATE);
I915_WRITE(ILK_DSPCLK_GATE,
I915_READ(ILK_DSPCLK_GATE) |
ILK_DPFC_DIS1 |
ILK_DPFC_DIS2 |
ILK_CLK_FBC);
}
I915_WRITE(ILK_DISPLAY_CHICKEN2,
I915_READ(ILK_DISPLAY_CHICKEN2) |
ILK_ELPIN_409_SELECT);
I915_WRITE(_3D_CHICKEN2,
_3D_CHICKEN2_WM_READ_PIPELINED << 16 |
_3D_CHICKEN2_WM_READ_PIPELINED);
}
static void gen6_init_clock_gating(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int pipe;
uint32_t dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE;
I915_WRITE(PCH_DSPCLK_GATE_D, dspclk_gate);
/*
* Disable clock gating reported to work incorrectly according to the
* specs, but enable as much else as we can.
* On Ibex Peak and Cougar Point, we need to disable clock
* gating for the panel power sequencer or it will fail to
* start up when no ports are active.
*/
if (HAS_PCH_SPLIT(dev)) {
uint32_t dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE;
I915_WRITE(SOUTH_DSPCLK_GATE_D, PCH_DPLSUNIT_CLOCK_GATE_DISABLE);
if (IS_GEN5(dev)) {
/* Required for FBC */
dspclk_gate |= DPFCUNIT_CLOCK_GATE_DISABLE |
DPFCRUNIT_CLOCK_GATE_DISABLE |
DPFDUNIT_CLOCK_GATE_DISABLE;
/* Required for CxSR */
dspclk_gate |= DPARBUNIT_CLOCK_GATE_DISABLE;
I915_WRITE(PCH_3DCGDIS0,
MARIUNIT_CLOCK_GATE_DISABLE |
SVSMUNIT_CLOCK_GATE_DISABLE);
I915_WRITE(PCH_3DCGDIS1,
VFMUNIT_CLOCK_GATE_DISABLE);
}
I915_WRITE(ILK_DISPLAY_CHICKEN2,
I915_READ(ILK_DISPLAY_CHICKEN2) |
ILK_ELPIN_409_SELECT);
I915_WRITE(PCH_DSPCLK_GATE_D, dspclk_gate);
I915_WRITE(WM3_LP_ILK, 0);
I915_WRITE(WM2_LP_ILK, 0);
I915_WRITE(WM1_LP_ILK, 0);
/*
* On Ibex Peak and Cougar Point, we need to disable clock
* gating for the panel power sequencer or it will fail to
* start up when no ports are active.
*/
I915_WRITE(SOUTH_DSPCLK_GATE_D, PCH_DPLSUNIT_CLOCK_GATE_DISABLE);
/*
* According to the spec the following bits should be
* set in order to enable memory self-refresh and fbc:
* The bit21 and bit22 of 0x42000
* The bit21 and bit22 of 0x42004
* The bit5 and bit7 of 0x42020
* The bit14 of 0x70180
* The bit14 of 0x71180
*/
I915_WRITE(ILK_DISPLAY_CHICKEN1,
I915_READ(ILK_DISPLAY_CHICKEN1) |
ILK_FBCQ_DIS | ILK_PABSTRETCH_DIS);
I915_WRITE(ILK_DISPLAY_CHICKEN2,
I915_READ(ILK_DISPLAY_CHICKEN2) |
ILK_DPARB_GATE | ILK_VSDPFD_FULL);
I915_WRITE(ILK_DSPCLK_GATE,
I915_READ(ILK_DSPCLK_GATE) |
ILK_DPARB_CLK_GATE |
ILK_DPFD_CLK_GATE);
/*
* According to the spec the following bits should be set in
* order to enable memory self-refresh
* The bit 22/21 of 0x42004
* The bit 5 of 0x42020
* The bit 15 of 0x45000
*/
if (IS_GEN5(dev)) {
I915_WRITE(ILK_DISPLAY_CHICKEN2,
(I915_READ(ILK_DISPLAY_CHICKEN2) |
ILK_DPARB_GATE | ILK_VSDPFD_FULL));
I915_WRITE(ILK_DSPCLK_GATE,
(I915_READ(ILK_DSPCLK_GATE) |
ILK_DPARB_CLK_GATE));
I915_WRITE(DISP_ARB_CTL,
(I915_READ(DISP_ARB_CTL) |
DISP_FBC_WM_DIS));
I915_WRITE(WM3_LP_ILK, 0);
I915_WRITE(WM2_LP_ILK, 0);
I915_WRITE(WM1_LP_ILK, 0);
}
/*
* Based on the document from hardware guys the following bits
* should be set unconditionally in order to enable FBC.
* The bit 22 of 0x42000
* The bit 22 of 0x42004
* The bit 7,8,9 of 0x42020.
*/
if (IS_IRONLAKE_M(dev)) {
I915_WRITE(ILK_DISPLAY_CHICKEN1,
I915_READ(ILK_DISPLAY_CHICKEN1) |
ILK_FBCQ_DIS);
I915_WRITE(ILK_DISPLAY_CHICKEN2,
I915_READ(ILK_DISPLAY_CHICKEN2) |
ILK_DPARB_GATE);
I915_WRITE(ILK_DSPCLK_GATE,
I915_READ(ILK_DSPCLK_GATE) |
ILK_DPFC_DIS1 |
ILK_DPFC_DIS2 |
ILK_CLK_FBC);
}
for_each_pipe(pipe)
I915_WRITE(DSPCNTR(pipe),
I915_READ(DSPCNTR(pipe)) |
DISPPLANE_TRICKLE_FEED_DISABLE);
}
I915_WRITE(ILK_DISPLAY_CHICKEN2,
I915_READ(ILK_DISPLAY_CHICKEN2) |
ILK_ELPIN_409_SELECT);
static void g4x_init_clock_gating(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t dspclk_gate;
if (IS_GEN5(dev)) {
I915_WRITE(_3D_CHICKEN2,
_3D_CHICKEN2_WM_READ_PIPELINED << 16 |
_3D_CHICKEN2_WM_READ_PIPELINED);
}
I915_WRITE(RENCLK_GATE_D1, 0);
I915_WRITE(RENCLK_GATE_D2, VF_UNIT_CLOCK_GATE_DISABLE |
GS_UNIT_CLOCK_GATE_DISABLE |
CL_UNIT_CLOCK_GATE_DISABLE);
I915_WRITE(RAMCLK_GATE_D, 0);
dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE |
OVRUNIT_CLOCK_GATE_DISABLE |
OVCUNIT_CLOCK_GATE_DISABLE;
if (IS_GM45(dev))
dspclk_gate |= DSSUNIT_CLOCK_GATE_DISABLE;
I915_WRITE(DSPCLK_GATE_D, dspclk_gate);
}
if (IS_GEN6(dev) || IS_IVYBRIDGE(dev)) {
I915_WRITE(WM3_LP_ILK, 0);
I915_WRITE(WM2_LP_ILK, 0);
I915_WRITE(WM1_LP_ILK, 0);
static void crestline_init_clock_gating(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
/*
* According to the spec the following bits should be
* set in order to enable memory self-refresh and fbc:
* The bit21 and bit22 of 0x42000
* The bit21 and bit22 of 0x42004
* The bit5 and bit7 of 0x42020
* The bit14 of 0x70180
* The bit14 of 0x71180
*/
I915_WRITE(ILK_DISPLAY_CHICKEN1,
I915_READ(ILK_DISPLAY_CHICKEN1) |
ILK_FBCQ_DIS | ILK_PABSTRETCH_DIS);
I915_WRITE(ILK_DISPLAY_CHICKEN2,
I915_READ(ILK_DISPLAY_CHICKEN2) |
ILK_DPARB_GATE | ILK_VSDPFD_FULL);
I915_WRITE(ILK_DSPCLK_GATE,
I915_READ(ILK_DSPCLK_GATE) |
ILK_DPARB_CLK_GATE |
ILK_DPFD_CLK_GATE);
for_each_pipe(pipe)
I915_WRITE(DSPCNTR(pipe),
I915_READ(DSPCNTR(pipe)) |
DISPPLANE_TRICKLE_FEED_DISABLE);
}
} else if (IS_G4X(dev)) {
uint32_t dspclk_gate;
I915_WRITE(RENCLK_GATE_D1, 0);
I915_WRITE(RENCLK_GATE_D2, VF_UNIT_CLOCK_GATE_DISABLE |
GS_UNIT_CLOCK_GATE_DISABLE |
CL_UNIT_CLOCK_GATE_DISABLE);
I915_WRITE(RAMCLK_GATE_D, 0);
dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE |
OVRUNIT_CLOCK_GATE_DISABLE |
OVCUNIT_CLOCK_GATE_DISABLE;
if (IS_GM45(dev))
dspclk_gate |= DSSUNIT_CLOCK_GATE_DISABLE;
I915_WRITE(DSPCLK_GATE_D, dspclk_gate);
} else if (IS_CRESTLINE(dev)) {
I915_WRITE(RENCLK_GATE_D1, I965_RCC_CLOCK_GATE_DISABLE);
I915_WRITE(RENCLK_GATE_D2, 0);
I915_WRITE(DSPCLK_GATE_D, 0);
I915_WRITE(RAMCLK_GATE_D, 0);
I915_WRITE16(DEUC, 0);
} else if (IS_BROADWATER(dev)) {
I915_WRITE(RENCLK_GATE_D1, I965_RCZ_CLOCK_GATE_DISABLE |
I965_RCC_CLOCK_GATE_DISABLE |
I965_RCPB_CLOCK_GATE_DISABLE |
I965_ISC_CLOCK_GATE_DISABLE |
I965_FBC_CLOCK_GATE_DISABLE);
I915_WRITE(RENCLK_GATE_D2, 0);
} else if (IS_GEN3(dev)) {
u32 dstate = I915_READ(D_STATE);
I915_WRITE(RENCLK_GATE_D1, I965_RCC_CLOCK_GATE_DISABLE);
I915_WRITE(RENCLK_GATE_D2, 0);
I915_WRITE(DSPCLK_GATE_D, 0);
I915_WRITE(RAMCLK_GATE_D, 0);
I915_WRITE16(DEUC, 0);
}
dstate |= DSTATE_PLL_D3_OFF | DSTATE_GFX_CLOCK_GATING |
DSTATE_DOT_CLOCK_GATING;
I915_WRITE(D_STATE, dstate);
} else if (IS_I85X(dev) || IS_I865G(dev)) {
I915_WRITE(RENCLK_GATE_D1, SV_CLOCK_GATE_DISABLE);
} else if (IS_I830(dev)) {
I915_WRITE(DSPCLK_GATE_D, OVRUNIT_CLOCK_GATE_DISABLE);
}
static void broadwater_init_clock_gating(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
I915_WRITE(RENCLK_GATE_D1, I965_RCZ_CLOCK_GATE_DISABLE |
I965_RCC_CLOCK_GATE_DISABLE |
I965_RCPB_CLOCK_GATE_DISABLE |
I965_ISC_CLOCK_GATE_DISABLE |
I965_FBC_CLOCK_GATE_DISABLE);
I915_WRITE(RENCLK_GATE_D2, 0);
}
static void gen3_init_clock_gating(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
u32 dstate = I915_READ(D_STATE);
dstate |= DSTATE_PLL_D3_OFF | DSTATE_GFX_CLOCK_GATING |
DSTATE_DOT_CLOCK_GATING;
I915_WRITE(D_STATE, dstate);
}
static void i85x_init_clock_gating(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
I915_WRITE(RENCLK_GATE_D1, SV_CLOCK_GATE_DISABLE);
}
static void i830_init_clock_gating(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
I915_WRITE(DSPCLK_GATE_D, OVRUNIT_CLOCK_GATE_DISABLE);
}
static void ironlake_teardown_rc6(struct drm_device *dev)
......@@ -7549,6 +7582,7 @@ static void intel_init_display(struct drm_device *dev)
dev_priv->display.update_wm = NULL;
}
dev_priv->display.fdi_link_train = ironlake_fdi_link_train;
dev_priv->display.init_clock_gating = ironlake_init_clock_gating;
} else if (IS_GEN6(dev)) {
if (SNB_READ_WM0_LATENCY()) {
dev_priv->display.update_wm = sandybridge_update_wm;
......@@ -7558,6 +7592,7 @@ static void intel_init_display(struct drm_device *dev)
dev_priv->display.update_wm = NULL;
}
dev_priv->display.fdi_link_train = gen6_fdi_link_train;
dev_priv->display.init_clock_gating = gen6_init_clock_gating;
} else if (IS_IVYBRIDGE(dev)) {
/* FIXME: detect B0+ stepping and use auto training */
dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train;
......@@ -7568,6 +7603,8 @@ static void intel_init_display(struct drm_device *dev)
"Disable CxSR\n");
dev_priv->display.update_wm = NULL;
}
dev_priv->display.init_clock_gating = gen6_init_clock_gating;
} else
dev_priv->display.update_wm = NULL;
} else if (IS_PINEVIEW(dev)) {
......@@ -7585,18 +7622,30 @@ static void intel_init_display(struct drm_device *dev)
dev_priv->display.update_wm = NULL;
} else
dev_priv->display.update_wm = pineview_update_wm;
} else if (IS_G4X(dev))
} else if (IS_G4X(dev)) {
dev_priv->display.update_wm = g4x_update_wm;
else if (IS_GEN4(dev))
dev_priv->display.init_clock_gating = g4x_init_clock_gating;
} else if (IS_GEN4(dev)) {
dev_priv->display.update_wm = i965_update_wm;
else if (IS_GEN3(dev)) {
if (IS_CRESTLINE(dev))
dev_priv->display.init_clock_gating = crestline_init_clock_gating;
else if (IS_BROADWATER(dev))
dev_priv->display.init_clock_gating = broadwater_init_clock_gating;
} else if (IS_GEN3(dev)) {
dev_priv->display.update_wm = i9xx_update_wm;
dev_priv->display.get_fifo_size = i9xx_get_fifo_size;
dev_priv->display.init_clock_gating = gen3_init_clock_gating;
} else if (IS_I865G(dev)) {
dev_priv->display.update_wm = i830_update_wm;
dev_priv->display.init_clock_gating = i85x_init_clock_gating;
dev_priv->display.get_fifo_size = i830_get_fifo_size;
} else if (IS_I85X(dev)) {
dev_priv->display.update_wm = i9xx_update_wm;
dev_priv->display.get_fifo_size = i85x_get_fifo_size;
dev_priv->display.init_clock_gating = i85x_init_clock_gating;
} else {
dev_priv->display.update_wm = i830_update_wm;
dev_priv->display.init_clock_gating = i830_init_clock_gating;
if (IS_845G(dev))
dev_priv->display.get_fifo_size = i845_get_fifo_size;
else
......@@ -7726,7 +7775,7 @@ void intel_modeset_init(struct drm_device *dev)
i915_disable_vga(dev);
intel_setup_outputs(dev);
intel_enable_clock_gating(dev);
dev_priv->display.init_clock_gating(dev);
if (IS_IRONLAKE_M(dev)) {
ironlake_enable_drps(dev);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册