提交 5f76a704 编写于 作者: J Jacob Keller 提交者: Jeff Kirsher

i40e: move client flags into state bits

The iWarp client flags are all potentially changed when the RTNL lock is
not held, so they should not be part of the pf->flags variable. Instead,
move them into the state field so that we can use atomic bit operations.

This is part of a larger effort to remove cmpxchg64 in
i40e_set_priv_flags()
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
上级 0605c45c
......@@ -167,6 +167,9 @@ enum i40e_state_t {
__I40E_MACVLAN_SYNC_PENDING,
__I40E_UDP_FILTER_SYNC_PENDING,
__I40E_TEMP_LINK_POLLING,
__I40E_CLIENT_SERVICE_REQUESTED,
__I40E_CLIENT_L2_CHANGE,
__I40E_CLIENT_RESET,
/* This must be last as it determines the size of the BITMAP */
__I40E_STATE_SIZE__,
};
......@@ -539,9 +542,7 @@ struct i40e_pf {
#define I40E_FLAG_LEGACY_RX BIT_ULL(21)
#define I40E_FLAG_PTP BIT_ULL(22)
#define I40E_FLAG_IWARP_ENABLED BIT_ULL(23)
#define I40E_FLAG_SERVICE_CLIENT_REQUESTED BIT_ULL(24)
#define I40E_FLAG_CLIENT_L2_CHANGE BIT_ULL(25)
#define I40E_FLAG_CLIENT_RESET BIT_ULL(26)
/* Gap for BIT_ULL(24) through BIT_ULL(26) */
#define I40E_FLAG_LINK_DOWN_ON_CLOSE_ENABLED BIT_ULL(27)
#define I40E_FLAG_SOURCE_PRUNING_DISABLED BIT_ULL(28)
#define I40E_FLAG_TC_MQPRIO BIT_ULL(29)
......
......@@ -376,9 +376,8 @@ void i40e_client_subtask(struct i40e_pf *pf)
struct i40e_vsi *vsi = pf->vsi[pf->lan_vsi];
int ret = 0;
if (!(pf->flags & I40E_FLAG_SERVICE_CLIENT_REQUESTED))
if (!test_and_clear_bit(__I40E_CLIENT_SERVICE_REQUESTED, pf->state))
return;
pf->flags &= ~I40E_FLAG_SERVICE_CLIENT_REQUESTED;
cdev = pf->cinst;
/* If we're down or resetting, just bail */
......@@ -459,7 +458,7 @@ int i40e_lan_add_device(struct i40e_pf *pf)
* added, we can schedule a subtask to go initiate the clients if
* they can be launched at probe time.
*/
pf->flags |= I40E_FLAG_SERVICE_CLIENT_REQUESTED;
set_bit(__I40E_CLIENT_SERVICE_REQUESTED, pf->state);
i40e_service_event_schedule(pf);
out:
......@@ -554,7 +553,7 @@ static void i40e_client_prepare(struct i40e_client *client)
pf = ldev->pf;
i40e_client_add_instance(pf);
/* Start the client subtask */
pf->flags |= I40E_FLAG_SERVICE_CLIENT_REQUESTED;
set_bit(__I40E_CLIENT_SERVICE_REQUESTED, pf->state);
i40e_service_event_schedule(pf);
}
mutex_unlock(&i40e_device_mutex);
......
......@@ -2634,8 +2634,8 @@ static int i40e_change_mtu(struct net_device *netdev, int new_mtu)
netdev->mtu = new_mtu;
if (netif_running(netdev))
i40e_vsi_reinit_locked(vsi);
pf->flags |= (I40E_FLAG_SERVICE_CLIENT_REQUESTED |
I40E_FLAG_CLIENT_L2_CHANGE);
set_bit(__I40E_CLIENT_SERVICE_REQUESTED, pf->state);
set_bit(__I40E_CLIENT_L2_CHANGE, pf->state);
return 0;
}
......@@ -4722,9 +4722,9 @@ static void i40e_vsi_close(struct i40e_vsi *vsi)
i40e_vsi_free_tx_resources(vsi);
i40e_vsi_free_rx_resources(vsi);
vsi->current_netdev_flags = 0;
pf->flags |= I40E_FLAG_SERVICE_CLIENT_REQUESTED;
set_bit(__I40E_CLIENT_SERVICE_REQUESTED, pf->state);
if (test_bit(__I40E_RESET_RECOVERY_PENDING, pf->state))
pf->flags |= I40E_FLAG_CLIENT_RESET;
set_bit(__I40E_CLIENT_RESET, pf->state);
}
/**
......@@ -6495,7 +6495,7 @@ static int i40e_up_complete(struct i40e_vsi *vsi)
/* On the next run of the service_task, notify any clients of the new
* opened netdev
*/
pf->flags |= I40E_FLAG_SERVICE_CLIENT_REQUESTED;
set_bit(__I40E_CLIENT_SERVICE_REQUESTED, pf->state);
i40e_service_event_schedule(pf);
return 0;
......@@ -8037,8 +8037,8 @@ static int i40e_handle_lldp_event(struct i40e_pf *pf,
i40e_service_event_schedule(pf);
} else {
i40e_pf_unquiesce_all_vsi(pf);
pf->flags |= (I40E_FLAG_SERVICE_CLIENT_REQUESTED |
I40E_FLAG_CLIENT_L2_CHANGE);
set_bit(__I40E_CLIENT_SERVICE_REQUESTED, pf->state);
set_bit(__I40E_CLIENT_L2_CHANGE, pf->state);
}
exit:
......@@ -9785,17 +9785,15 @@ static void i40e_service_task(struct work_struct *work)
i40e_vc_process_vflr_event(pf);
i40e_watchdog_subtask(pf);
i40e_fdir_reinit_subtask(pf);
if (pf->flags & I40E_FLAG_CLIENT_RESET) {
if (test_and_clear_bit(__I40E_CLIENT_RESET, pf->state)) {
/* Client subtask will reopen next time through. */
i40e_notify_client_of_netdev_close(pf->vsi[pf->lan_vsi], true);
pf->flags &= ~I40E_FLAG_CLIENT_RESET;
} else {
i40e_client_subtask(pf);
if (pf->flags & I40E_FLAG_CLIENT_L2_CHANGE) {
if (test_and_clear_bit(__I40E_CLIENT_L2_CHANGE,
pf->state))
i40e_notify_client_of_l2_param_changes(
pf->vsi[pf->lan_vsi]);
pf->flags &= ~I40E_FLAG_CLIENT_L2_CHANGE;
}
}
i40e_sync_filters_subtask(pf);
i40e_sync_udp_filters_subtask(pf);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册