drm/i915: do not save/restore backlight registers in KMS

The backlight enable code now has the smarts to do the right thing. Only
do backlight register save/restore in UMS.

Some VLV specific code gets dropped as UMS is not supported on VLV.

v2: Move save/restore to UMS instead of removing completely (Daniel).
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/i915_drv.h

@@ -768,8 +768,6 @@ struct i915_suspend_saved_registers {
 	u32 saveBLC_PWM_CTL;
 	u32 saveBLC_PWM_CTL2;
 	u32 saveBLC_HIST_CTL_B;
-	u32 saveBLC_PWM_CTL_B;
-	u32 saveBLC_PWM_CTL2_B;
 	u32 saveBLC_CPU_PWM_CTL;
 	u32 saveBLC_CPU_PWM_CTL2;
 	u32 saveFPB0;

drivers/gpu/drm/i915/i915_suspend.c

@@ -192,7 +192,6 @@ static void i915_restore_vga(struct drm_device *dev)
 static void i915_save_display(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	unsigned long flags;
 
 	/* Display arbitration control */
 	if (INTEL_INFO(dev)->gen <= 4)
@@ -203,46 +202,27 @@ static void i915_save_display(struct drm_device *dev)
 	if (!drm_core_check_feature(dev, DRIVER_MODESET))
 		i915_save_display_reg(dev);
 
-	spin_lock_irqsave(&dev_priv->backlight_lock, flags);
-
 	/* LVDS state */
 	if (HAS_PCH_SPLIT(dev)) {
 		dev_priv->regfile.savePP_CONTROL = I915_READ(PCH_PP_CONTROL);
-		dev_priv->regfile.saveBLC_PWM_CTL = I915_READ(BLC_PWM_PCH_CTL1);
-		dev_priv->regfile.saveBLC_PWM_CTL2 = I915_READ(BLC_PWM_PCH_CTL2);
-		dev_priv->regfile.saveBLC_CPU_PWM_CTL = I915_READ(BLC_PWM_CPU_CTL);
-		dev_priv->regfile.saveBLC_CPU_PWM_CTL2 = I915_READ(BLC_PWM_CPU_CTL2);
 		if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev))
 			dev_priv->regfile.saveLVDS = I915_READ(PCH_LVDS);
 	} else if (IS_VALLEYVIEW(dev)) {
 		dev_priv->regfile.savePP_CONTROL = I915_READ(PP_CONTROL);
 		dev_priv->regfile.savePFIT_PGM_RATIOS = I915_READ(PFIT_PGM_RATIOS);
 
-		dev_priv->regfile.saveBLC_PWM_CTL =
-			I915_READ(VLV_BLC_PWM_CTL(PIPE_A));
 		dev_priv->regfile.saveBLC_HIST_CTL =
 			I915_READ(VLV_BLC_HIST_CTL(PIPE_A));
-		dev_priv->regfile.saveBLC_PWM_CTL2 =
-			I915_READ(VLV_BLC_PWM_CTL2(PIPE_A));
-		dev_priv->regfile.saveBLC_PWM_CTL_B =
-			I915_READ(VLV_BLC_PWM_CTL(PIPE_B));
 		dev_priv->regfile.saveBLC_HIST_CTL_B =
 			I915_READ(VLV_BLC_HIST_CTL(PIPE_B));
-		dev_priv->regfile.saveBLC_PWM_CTL2_B =
-			I915_READ(VLV_BLC_PWM_CTL2(PIPE_B));
 	} else {
 		dev_priv->regfile.savePP_CONTROL = I915_READ(PP_CONTROL);
 		dev_priv->regfile.savePFIT_PGM_RATIOS = I915_READ(PFIT_PGM_RATIOS);
-		dev_priv->regfile.saveBLC_PWM_CTL = I915_READ(BLC_PWM_CTL);
 		dev_priv->regfile.saveBLC_HIST_CTL = I915_READ(BLC_HIST_CTL);
-		if (INTEL_INFO(dev)->gen >= 4)
-			dev_priv->regfile.saveBLC_PWM_CTL2 = I915_READ(BLC_PWM_CTL2);
 		if (IS_MOBILE(dev) && !IS_I830(dev))
 			dev_priv->regfile.saveLVDS = I915_READ(LVDS);
 	}
 
-	spin_unlock_irqrestore(&dev_priv->backlight_lock, flags);
-
 	if (!IS_I830(dev) && !IS_845G(dev) && !HAS_PCH_SPLIT(dev))
 		dev_priv->regfile.savePFIT_CONTROL = I915_READ(PFIT_CONTROL);
 
@@ -278,7 +258,6 @@ static void i915_restore_display(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	u32 mask = 0xffffffff;
-	unsigned long flags;
 
 	/* Display arbitration */
 	if (INTEL_INFO(dev)->gen <= 4)
@@ -287,12 +266,6 @@ static void i915_restore_display(struct drm_device *dev)
 	if (!drm_core_check_feature(dev, DRIVER_MODESET))
 		i915_restore_display_reg(dev);
 
-	spin_lock_irqsave(&dev_priv->backlight_lock, flags);
-
-	/* LVDS state */
-	if (INTEL_INFO(dev)->gen >= 4 && !HAS_PCH_SPLIT(dev))
-		I915_WRITE(BLC_PWM_CTL2, dev_priv->regfile.saveBLC_PWM_CTL2);
-
 	if (drm_core_check_feature(dev, DRIVER_MODESET))
 		mask = ~LVDS_PORT_EN;
 
@@ -305,13 +278,6 @@ static void i915_restore_display(struct drm_device *dev)
 		I915_WRITE(PFIT_CONTROL, dev_priv->regfile.savePFIT_CONTROL);
 
 	if (HAS_PCH_SPLIT(dev)) {
-		I915_WRITE(BLC_PWM_PCH_CTL1, dev_priv->regfile.saveBLC_PWM_CTL);
-		I915_WRITE(BLC_PWM_PCH_CTL2, dev_priv->regfile.saveBLC_PWM_CTL2);
-		/* NOTE: BLC_PWM_CPU_CTL must be written after BLC_PWM_CPU_CTL2;
-		 * otherwise we get blank eDP screen after S3 on some machines
-		 */
-		I915_WRITE(BLC_PWM_CPU_CTL2, dev_priv->regfile.saveBLC_CPU_PWM_CTL2);
-		I915_WRITE(BLC_PWM_CPU_CTL, dev_priv->regfile.saveBLC_CPU_PWM_CTL);
 		I915_WRITE(PCH_PP_ON_DELAYS, dev_priv->regfile.savePP_ON_DELAYS);
 		I915_WRITE(PCH_PP_OFF_DELAYS, dev_priv->regfile.savePP_OFF_DELAYS);
 		I915_WRITE(PCH_PP_DIVISOR, dev_priv->regfile.savePP_DIVISOR);
@@ -319,21 +285,12 @@ static void i915_restore_display(struct drm_device *dev)
 		I915_WRITE(RSTDBYCTL,
 			   dev_priv->regfile.saveMCHBAR_RENDER_STANDBY);
 	} else if (IS_VALLEYVIEW(dev)) {
-		I915_WRITE(VLV_BLC_PWM_CTL(PIPE_A),
-			   dev_priv->regfile.saveBLC_PWM_CTL);
 		I915_WRITE(VLV_BLC_HIST_CTL(PIPE_A),
 			   dev_priv->regfile.saveBLC_HIST_CTL);
-		I915_WRITE(VLV_BLC_PWM_CTL2(PIPE_A),
-			   dev_priv->regfile.saveBLC_PWM_CTL2);
-		I915_WRITE(VLV_BLC_PWM_CTL(PIPE_B),
-			   dev_priv->regfile.saveBLC_PWM_CTL);
 		I915_WRITE(VLV_BLC_HIST_CTL(PIPE_B),
 			   dev_priv->regfile.saveBLC_HIST_CTL);
-		I915_WRITE(VLV_BLC_PWM_CTL2(PIPE_B),
-			   dev_priv->regfile.saveBLC_PWM_CTL2);
 	} else {
 		I915_WRITE(PFIT_PGM_RATIOS, dev_priv->regfile.savePFIT_PGM_RATIOS);
-		I915_WRITE(BLC_PWM_CTL, dev_priv->regfile.saveBLC_PWM_CTL);
 		I915_WRITE(BLC_HIST_CTL, dev_priv->regfile.saveBLC_HIST_CTL);
 		I915_WRITE(PP_ON_DELAYS, dev_priv->regfile.savePP_ON_DELAYS);
 		I915_WRITE(PP_OFF_DELAYS, dev_priv->regfile.savePP_OFF_DELAYS);
@@ -341,8 +298,6 @@ static void i915_restore_display(struct drm_device *dev)
 		I915_WRITE(PP_CONTROL, dev_priv->regfile.savePP_CONTROL);
 	}
 
-	spin_unlock_irqrestore(&dev_priv->backlight_lock, flags);
-
 	/* only restore FBC info on the platform that supports FBC*/
 	intel_disable_fbc(dev);
 	if (I915_HAS_FBC(dev)) {

drivers/gpu/drm/i915/i915_ums.c

@@ -270,6 +270,18 @@ void i915_save_display_reg(struct drm_device *dev)
 	}
 	/* FIXME: regfile.save TV & SDVO state */
 
+	/* Backlight */
+	if (HAS_PCH_SPLIT(dev)) {
+		dev_priv->regfile.saveBLC_PWM_CTL = I915_READ(BLC_PWM_PCH_CTL1);
+		dev_priv->regfile.saveBLC_PWM_CTL2 = I915_READ(BLC_PWM_PCH_CTL2);
+		dev_priv->regfile.saveBLC_CPU_PWM_CTL = I915_READ(BLC_PWM_CPU_CTL);
+		dev_priv->regfile.saveBLC_CPU_PWM_CTL2 = I915_READ(BLC_PWM_CPU_CTL2);
+	} else {
+		dev_priv->regfile.saveBLC_PWM_CTL = I915_READ(BLC_PWM_CTL);
+		if (INTEL_INFO(dev)->gen >= 4)
+			dev_priv->regfile.saveBLC_PWM_CTL2 = I915_READ(BLC_PWM_CTL2);
+	}
+
 	return;
 }
 
@@ -280,6 +292,21 @@ void i915_restore_display_reg(struct drm_device *dev)
 	int dpll_b_reg, fpb0_reg, fpb1_reg;
 	int i;
 
+	/* Backlight */
+	if (HAS_PCH_SPLIT(dev)) {
+		I915_WRITE(BLC_PWM_PCH_CTL1, dev_priv->regfile.saveBLC_PWM_CTL);
+		I915_WRITE(BLC_PWM_PCH_CTL2, dev_priv->regfile.saveBLC_PWM_CTL2);
+		/* NOTE: BLC_PWM_CPU_CTL must be written after BLC_PWM_CPU_CTL2;
+		 * otherwise we get blank eDP screen after S3 on some machines
+		 */
+		I915_WRITE(BLC_PWM_CPU_CTL2, dev_priv->regfile.saveBLC_CPU_PWM_CTL2);
+		I915_WRITE(BLC_PWM_CPU_CTL, dev_priv->regfile.saveBLC_CPU_PWM_CTL);
+	} else {
+		if (INTEL_INFO(dev)->gen >= 4)
+			I915_WRITE(BLC_PWM_CTL2, dev_priv->regfile.saveBLC_PWM_CTL2);
+		I915_WRITE(BLC_PWM_CTL, dev_priv->regfile.saveBLC_PWM_CTL);
+	}
+
 	/* Display port ratios (must be done before clock is set) */
 	if (SUPPORTS_INTEGRATED_DP(dev)) {
 		I915_WRITE(_PIPEA_DATA_M_G4X, dev_priv->regfile.savePIPEA_GMCH_DATA_M);