Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6:
  PCI: Fix warning message in PCIE port driver
  PCI: Stop unhiding the SMBus on Toshiba laptops
  PCI: Fix up PCI power management doc
  pci: set pci=bfsort for PowerEdge R900

Documentation/power/pci.txt

@@ -102,31 +102,28 @@ pci_save_state
 --------------
 
 Usage:
-	pci_save_state(dev, buffer);
+	pci_save_state(struct pci_dev *dev);
 
 Description:
-	Save first 64 bytes of PCI config space. Buffer must be allocated by
-	caller.
+	Save first 64 bytes of PCI config space, along with any additional
+	PCI-Express or PCI-X information.
 
 
 pci_restore_state
 -----------------
 
 Usage:
-	pci_restore_state(dev, buffer);
+	pci_restore_state(struct pci_dev *dev);
 
 Description:
-	Restore previously saved config space. (First 64 bytes only);
-
-	If buffer is NULL, then restore what information we know about the
-	device from bootup: BARs and interrupt line.
+	Restore previously saved config space.
 
 
 pci_set_power_state
 -------------------
 
 Usage:
-	pci_set_power_state(dev, state);
+	pci_set_power_state(struct pci_dev *dev, pci_power_t state);
 
 Description:
 	Transition device to low power state using PCI PM Capabilities
@@ -142,7 +139,7 @@ pci_enable_wake
 ---------------
 
 Usage:
-	pci_enable_wake(dev, state, enable);
+	pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable);
 
 Description:
 	Enable device to generate PME# during low power state using PCI PM 

arch/i386/pci/common.c

@@ -191,6 +191,14 @@ static struct dmi_system_id __devinitdata pciprobe_dmi_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2950"),
 		},
 	},
+	{
+		.callback = set_bf_sort,
+		.ident = "Dell PowerEdge R900",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge R900"),
+		},
+	},
 	{
 		.callback = set_bf_sort,
 		.ident = "HP ProLiant BL20p G3",

drivers/pci/pcie/portdrv_pci.c

@@ -93,7 +93,7 @@ static int __devinit pcie_portdrv_probe (struct pci_dev *dev,
         if (!dev->irq && dev->pin) {
 		printk(KERN_WARNING 
 		"%s->Dev[%04x:%04x] has invalid IRQ. Check vendor BIOS\n", 
-		__FUNCTION__, dev->device, dev->vendor);
+		__FUNCTION__, dev->vendor, dev->device);
 	}
 	if (pcie_port_device_register(dev)) {
 		pci_disable_device(dev);

drivers/pci/quirks.c

@@ -963,6 +963,13 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, k8t_sound_ho
  * bridge. Unfortunately, this device has no subvendor/subdevice ID. So it 
  * becomes necessary to do this tweak in two steps -- I've chosen the Host
  * bridge as trigger.
+ *
+ * Note that we used to unhide the SMBus that way on Toshiba laptops
+ * (Satellite A40 and Tecra M2) but then found that the thermal management
+ * was done by SMM code, which could cause unsynchronized concurrent
+ * accesses to the SMBus registers, with potentially bad effects. Thus you
+ * should be very careful when adding new entries: if SMM is accessing the
+ * Intel SMBus, this is a very good reason to leave it hidden.
  */
 static int asus_hides_smbus;
 
@@ -1040,17 +1047,6 @@ static void __init asus_hides_smbus_hostbridge(struct pci_dev *dev)
 			case 0x099c: /* HP Compaq nx6110 */
 				asus_hides_smbus = 1;
 			}
-	} else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_TOSHIBA)) {
-		if (dev->device == PCI_DEVICE_ID_INTEL_82855GM_HB)
-			switch(dev->subsystem_device) {
-			case 0x0001: /* Toshiba Satellite A40 */
-				asus_hides_smbus = 1;
-			}
-		else if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB)
-			switch(dev->subsystem_device) {
-			case 0x0001: /* Toshiba Tecra M2 */
-				asus_hides_smbus = 1;
-			}
        } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG)) {
                if (dev->device ==  PCI_DEVICE_ID_INTEL_82855PM_HB)
                        switch(dev->subsystem_device) {