diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 2b456a915d77130edd2d3e7decfc1fb148a54fd0..a121e36e5a47fec8a79db8d6475ff2819e2e4192 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -98,6 +98,19 @@ config TOUCHSCREEN_ATMEL_MXT To compile this driver as a module, choose M here: the module will be called atmel_mxt_ts. +config TOUCHSCREEN_AUO_PIXCIR + tristate "AUO in-cell touchscreen using Pixcir ICs" + depends on I2C + depends on GPIOLIB + help + Say Y here if you have a AUO display with in-cell touchscreen + using Pixcir ICs. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called auo-pixcir-ts. + config TOUCHSCREEN_BITSY tristate "Compaq iPAQ H3600 (Bitsy) touchscreen" depends on SA1100_BITSY diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index a09c546b33b791ef527f975b4a05ecf97bbe3355..f0b4d16d39a6604dba9df51f523f9faa52331feb 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_TOUCHSCREEN_AD7879_SPI) += ad7879-spi.o obj-$(CONFIG_TOUCHSCREEN_ADS7846) += ads7846.o obj-$(CONFIG_TOUCHSCREEN_ATMEL_MXT) += atmel_mxt_ts.o obj-$(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) += atmel_tsadcc.o +obj-$(CONFIG_TOUCHSCREEN_AUO_PIXCIR) += auo-pixcir-ts.o obj-$(CONFIG_TOUCHSCREEN_BITSY) += h3600_ts_input.o obj-$(CONFIG_TOUCHSCREEN_BU21013) += bu21013_ts.o obj-$(CONFIG_TOUCHSCREEN_CY8CTMG110) += cy8ctmg110_ts.o diff --git a/drivers/input/touchscreen/auo-pixcir-ts.c b/drivers/input/touchscreen/auo-pixcir-ts.c new file mode 100644 index 0000000000000000000000000000000000000000..94fb9fbb08a993a074044ba8d3bbd0ccff2db925 --- /dev/null +++ b/drivers/input/touchscreen/auo-pixcir-ts.c @@ -0,0 +1,652 @@ +/* + * Driver for AUO in-cell touchscreens + * + * Copyright (c) 2011 Heiko Stuebner + * + * loosely based on auo_touch.c from Dell Streak vendor-kernel + * + * Copyright (c) 2008 QUALCOMM Incorporated. + * Copyright (c) 2008 QUALCOMM USA, INC. + * + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * Coordinate calculation: + * X1 = X1_LSB + X1_MSB*256 + * Y1 = Y1_LSB + Y1_MSB*256 + * X2 = X2_LSB + X2_MSB*256 + * Y2 = Y2_LSB + Y2_MSB*256 + */ +#define AUO_PIXCIR_REG_X1_LSB 0x00 +#define AUO_PIXCIR_REG_X1_MSB 0x01 +#define AUO_PIXCIR_REG_Y1_LSB 0x02 +#define AUO_PIXCIR_REG_Y1_MSB 0x03 +#define AUO_PIXCIR_REG_X2_LSB 0x04 +#define AUO_PIXCIR_REG_X2_MSB 0x05 +#define AUO_PIXCIR_REG_Y2_LSB 0x06 +#define AUO_PIXCIR_REG_Y2_MSB 0x07 + +#define AUO_PIXCIR_REG_STRENGTH 0x0d +#define AUO_PIXCIR_REG_STRENGTH_X1_LSB 0x0e +#define AUO_PIXCIR_REG_STRENGTH_X1_MSB 0x0f + +#define AUO_PIXCIR_REG_RAW_DATA_X 0x2b +#define AUO_PIXCIR_REG_RAW_DATA_Y 0x4f + +#define AUO_PIXCIR_REG_X_SENSITIVITY 0x6f +#define AUO_PIXCIR_REG_Y_SENSITIVITY 0x70 +#define AUO_PIXCIR_REG_INT_SETTING 0x71 +#define AUO_PIXCIR_REG_INT_WIDTH 0x72 +#define AUO_PIXCIR_REG_POWER_MODE 0x73 + +#define AUO_PIXCIR_REG_VERSION 0x77 +#define AUO_PIXCIR_REG_CALIBRATE 0x78 + +#define AUO_PIXCIR_REG_TOUCHAREA_X1 0x1e +#define AUO_PIXCIR_REG_TOUCHAREA_Y1 0x1f +#define AUO_PIXCIR_REG_TOUCHAREA_X2 0x20 +#define AUO_PIXCIR_REG_TOUCHAREA_Y2 0x21 + +#define AUO_PIXCIR_REG_EEPROM_CALIB_X 0x42 +#define AUO_PIXCIR_REG_EEPROM_CALIB_Y 0xad + +#define AUO_PIXCIR_INT_TPNUM_MASK 0xe0 +#define AUO_PIXCIR_INT_TPNUM_SHIFT 5 +#define AUO_PIXCIR_INT_RELEASE (1 << 4) +#define AUO_PIXCIR_INT_ENABLE (1 << 3) +#define AUO_PIXCIR_INT_POL_HIGH (1 << 2) +#define AUO_PIXCIR_INT_MODE_MASK 0x03 + +/* + * Power modes: + * active: scan speed 60Hz + * sleep: scan speed 10Hz can be auto-activated, wakeup on 1st touch + * deep sleep: scan speed 1Hz can only be entered or left manually. + */ +#define AUO_PIXCIR_POWER_ACTIVE 0x00 +#define AUO_PIXCIR_POWER_SLEEP 0x01 +#define AUO_PIXCIR_POWER_DEEP_SLEEP 0x02 +#define AUO_PIXCIR_POWER_MASK 0x03 + +#define AUO_PIXCIR_POWER_ALLOW_SLEEP (1 << 2) +#define AUO_PIXCIR_POWER_IDLE_TIME(ms) ((ms & 0xf) << 4) + +#define AUO_PIXCIR_CALIBRATE 0x03 + +#define AUO_PIXCIR_EEPROM_CALIB_X_LEN 62 +#define AUO_PIXCIR_EEPROM_CALIB_Y_LEN 36 + +#define AUO_PIXCIR_RAW_DATA_X_LEN 18 +#define AUO_PIXCIR_RAW_DATA_Y_LEN 11 + +#define AUO_PIXCIR_STRENGTH_ENABLE (1 << 0) + +/* Touchscreen absolute values */ +#define AUO_PIXCIR_REPORT_POINTS 2 +#define AUO_PIXCIR_MAX_AREA 0xff +#define AUO_PIXCIR_PENUP_TIMEOUT_MS 10 + +struct auo_pixcir_ts { + struct i2c_client *client; + struct input_dev *input; + char phys[32]; + + /* special handling for touch_indicate interupt mode */ + bool touch_ind_mode; + + wait_queue_head_t wait; + bool stopped; +}; + +struct auo_point_t { + int coord_x; + int coord_y; + int area_major; + int area_minor; + int orientation; +}; + +static int auo_pixcir_collect_data(struct auo_pixcir_ts *ts, + struct auo_point_t *point) +{ + struct i2c_client *client = ts->client; + const struct auo_pixcir_ts_platdata *pdata = client->dev.platform_data; + uint8_t raw_coord[8]; + uint8_t raw_area[4]; + int i, ret; + + /* touch coordinates */ + ret = i2c_smbus_read_i2c_block_data(client, AUO_PIXCIR_REG_X1_LSB, + 8, raw_coord); + if (ret < 0) { + dev_err(&client->dev, "failed to read coordinate, %d\n", ret); + return ret; + } + + /* touch area */ + ret = i2c_smbus_read_i2c_block_data(client, AUO_PIXCIR_REG_TOUCHAREA_X1, + 4, raw_area); + if (ret < 0) { + dev_err(&client->dev, "could not read touch area, %d\n", ret); + return ret; + } + + for (i = 0; i < AUO_PIXCIR_REPORT_POINTS; i++) { + point[i].coord_x = + raw_coord[4 * i + 1] << 8 | raw_coord[4 * i]; + point[i].coord_y = + raw_coord[4 * i + 3] << 8 | raw_coord[4 * i + 2]; + + if (point[i].coord_x > pdata->x_max || + point[i].coord_y > pdata->y_max) { + dev_warn(&client->dev, "coordinates (%d,%d) invalid\n", + point[i].coord_x, point[i].coord_y); + point[i].coord_x = point[i].coord_y = 0; + } + + /* determine touch major, minor and orientation */ + point[i].area_major = max(raw_area[2 * i], raw_area[2 * i + 1]); + point[i].area_minor = min(raw_area[2 * i], raw_area[2 * i + 1]); + point[i].orientation = raw_area[2 * i] > raw_area[2 * i + 1]; + } + + return 0; +} + +static irqreturn_t auo_pixcir_interrupt(int irq, void *dev_id) +{ + struct auo_pixcir_ts *ts = dev_id; + struct i2c_client *client = ts->client; + const struct auo_pixcir_ts_platdata *pdata = client->dev.platform_data; + struct auo_point_t point[AUO_PIXCIR_REPORT_POINTS]; + int i; + int ret; + int fingers = 0; + int abs = -1; + + while (!ts->stopped) { + + /* check for up event in touch touch_ind_mode */ + if (ts->touch_ind_mode) { + if (gpio_get_value(pdata->gpio_int) == 0) { + input_mt_sync(ts->input); + input_report_key(ts->input, BTN_TOUCH, 0); + input_sync(ts->input); + break; + } + } + + ret = auo_pixcir_collect_data(ts, point); + if (ret < 0) { + /* we want to loop only in touch_ind_mode */ + if (!ts->touch_ind_mode) + break; + + wait_event_timeout(ts->wait, ts->stopped, + msecs_to_jiffies(AUO_PIXCIR_PENUP_TIMEOUT_MS)); + continue; + } + + for (i = 0; i < AUO_PIXCIR_REPORT_POINTS; i++) { + if (point[i].coord_x > 0 || point[i].coord_y > 0) { + input_report_abs(ts->input, ABS_MT_POSITION_X, + point[i].coord_x); + input_report_abs(ts->input, ABS_MT_POSITION_Y, + point[i].coord_y); + input_report_abs(ts->input, ABS_MT_TOUCH_MAJOR, + point[i].area_major); + input_report_abs(ts->input, ABS_MT_TOUCH_MINOR, + point[i].area_minor); + input_report_abs(ts->input, ABS_MT_ORIENTATION, + point[i].orientation); + input_mt_sync(ts->input); + + /* use first finger as source for singletouch */ + if (fingers == 0) + abs = i; + + /* number of touch points could also be queried + * via i2c but would require an additional call + */ + fingers++; + } + } + + input_report_key(ts->input, BTN_TOUCH, fingers > 0); + + if (abs > -1) { + input_report_abs(ts->input, ABS_X, point[abs].coord_x); + input_report_abs(ts->input, ABS_Y, point[abs].coord_y); + } + + input_sync(ts->input); + + /* we want to loop only in touch_ind_mode */ + if (!ts->touch_ind_mode) + break; + + wait_event_timeout(ts->wait, ts->stopped, + msecs_to_jiffies(AUO_PIXCIR_PENUP_TIMEOUT_MS)); + } + + return IRQ_HANDLED; +} + +/* + * Set the power mode of the device. + * Valid modes are + * - AUO_PIXCIR_POWER_ACTIVE + * - AUO_PIXCIR_POWER_SLEEP - automatically left on first touch + * - AUO_PIXCIR_POWER_DEEP_SLEEP + */ +static int auo_pixcir_power_mode(struct auo_pixcir_ts *ts, int mode) +{ + struct i2c_client *client = ts->client; + int ret; + + ret = i2c_smbus_read_byte_data(client, AUO_PIXCIR_REG_POWER_MODE); + if (ret < 0) { + dev_err(&client->dev, "unable to read reg %Xh, %d\n", + AUO_PIXCIR_REG_POWER_MODE, ret); + return ret; + } + + ret &= ~AUO_PIXCIR_POWER_MASK; + ret |= mode; + + ret = i2c_smbus_write_byte_data(client, AUO_PIXCIR_REG_POWER_MODE, ret); + if (ret) { + dev_err(&client->dev, "unable to write reg %Xh, %d\n", + AUO_PIXCIR_REG_POWER_MODE, ret); + return ret; + } + + return 0; +} + +static __devinit int auo_pixcir_int_config(struct auo_pixcir_ts *ts, + int int_setting) +{ + struct i2c_client *client = ts->client; + struct auo_pixcir_ts_platdata *pdata = client->dev.platform_data; + int ret; + + ret = i2c_smbus_read_byte_data(client, AUO_PIXCIR_REG_INT_SETTING); + if (ret < 0) { + dev_err(&client->dev, "unable to read reg %Xh, %d\n", + AUO_PIXCIR_REG_INT_SETTING, ret); + return ret; + } + + ret &= ~AUO_PIXCIR_INT_MODE_MASK; + ret |= int_setting; + ret |= AUO_PIXCIR_INT_POL_HIGH; /* always use high for interrupts */ + + ret = i2c_smbus_write_byte_data(client, AUO_PIXCIR_REG_INT_SETTING, + ret); + if (ret < 0) { + dev_err(&client->dev, "unable to write reg %Xh, %d\n", + AUO_PIXCIR_REG_INT_SETTING, ret); + return ret; + } + + ts->touch_ind_mode = pdata->int_setting == AUO_PIXCIR_INT_TOUCH_IND; + + return 0; +} + +/* control the generation of interrupts on the device side */ +static int auo_pixcir_int_toggle(struct auo_pixcir_ts *ts, bool enable) +{ + struct i2c_client *client = ts->client; + int ret; + + ret = i2c_smbus_read_byte_data(client, AUO_PIXCIR_REG_INT_SETTING); + if (ret < 0) { + dev_err(&client->dev, "unable to read reg %Xh, %d\n", + AUO_PIXCIR_REG_INT_SETTING, ret); + return ret; + } + + if (enable) + ret |= AUO_PIXCIR_INT_ENABLE; + else + ret &= ~AUO_PIXCIR_INT_ENABLE; + + ret = i2c_smbus_write_byte_data(client, AUO_PIXCIR_REG_INT_SETTING, + ret); + if (ret < 0) { + dev_err(&client->dev, "unable to write reg %Xh, %d\n", + AUO_PIXCIR_REG_INT_SETTING, ret); + return ret; + } + + return 0; +} + +static int auo_pixcir_start(struct auo_pixcir_ts *ts) +{ + struct i2c_client *client = ts->client; + int ret; + + ret = auo_pixcir_power_mode(ts, AUO_PIXCIR_POWER_ACTIVE); + if (ret < 0) { + dev_err(&client->dev, "could not set power mode, %d\n", + ret); + return ret; + } + + ts->stopped = false; + mb(); + enable_irq(client->irq); + + ret = auo_pixcir_int_toggle(ts, 1); + if (ret < 0) { + dev_err(&client->dev, "could not enable interrupt, %d\n", + ret); + disable_irq(client->irq); + return ret; + } + + return 0; +} + +static int auo_pixcir_stop(struct auo_pixcir_ts *ts) +{ + struct i2c_client *client = ts->client; + int ret; + + ret = auo_pixcir_int_toggle(ts, 0); + if (ret < 0) { + dev_err(&client->dev, "could not disable interrupt, %d\n", + ret); + return ret; + } + + /* disable receiving of interrupts */ + disable_irq(client->irq); + ts->stopped = true; + mb(); + wake_up(&ts->wait); + + return auo_pixcir_power_mode(ts, AUO_PIXCIR_POWER_DEEP_SLEEP); +} + +static int auo_pixcir_input_open(struct input_dev *dev) +{ + struct auo_pixcir_ts *ts = input_get_drvdata(dev); + int ret; + + ret = auo_pixcir_start(ts); + if (ret) + return ret; + + return 0; +} + +static void auo_pixcir_input_close(struct input_dev *dev) +{ + struct auo_pixcir_ts *ts = input_get_drvdata(dev); + + auo_pixcir_stop(ts); + + return; +} + +#ifdef CONFIG_PM_SLEEP +static int auo_pixcir_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct auo_pixcir_ts *ts = i2c_get_clientdata(client); + struct input_dev *input = ts->input; + int ret = 0; + + mutex_lock(&input->mutex); + + /* when configured as wakeup source, device should always wake system + * therefore start device if necessary + */ + if (device_may_wakeup(&client->dev)) { + /* need to start device if not open, to be wakeup source */ + if (!input->users) { + ret = auo_pixcir_start(ts); + if (ret) + goto unlock; + } + + enable_irq_wake(client->irq); + ret = auo_pixcir_power_mode(ts, AUO_PIXCIR_POWER_SLEEP); + } else if (input->users) { + ret = auo_pixcir_stop(ts); + } + +unlock: + mutex_unlock(&input->mutex); + + return ret; +} + +static int auo_pixcir_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct auo_pixcir_ts *ts = i2c_get_clientdata(client); + struct input_dev *input = ts->input; + int ret = 0; + + mutex_lock(&input->mutex); + + if (device_may_wakeup(&client->dev)) { + disable_irq_wake(client->irq); + + /* need to stop device if it was not open on suspend */ + if (!input->users) { + ret = auo_pixcir_stop(ts); + if (ret) + goto unlock; + } + + /* device wakes automatically from SLEEP */ + } else if (input->users) { + ret = auo_pixcir_start(ts); + } + +unlock: + mutex_unlock(&input->mutex); + + return ret; +} +#endif + +static SIMPLE_DEV_PM_OPS(auo_pixcir_pm_ops, auo_pixcir_suspend, + auo_pixcir_resume); + +static int __devinit auo_pixcir_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + const struct auo_pixcir_ts_platdata *pdata = client->dev.platform_data; + struct auo_pixcir_ts *ts; + struct input_dev *input_dev; + int ret; + + if (!pdata) + return -EINVAL; + + ts = kzalloc(sizeof(struct auo_pixcir_ts), GFP_KERNEL); + if (!ts) + return -ENOMEM; + + ret = gpio_request(pdata->gpio_int, "auo_pixcir_ts_int"); + if (ret) { + dev_err(&client->dev, "request of gpio %d failed, %d\n", + pdata->gpio_int, ret); + goto err_gpio_int; + } + + if (pdata->init_hw) + pdata->init_hw(client); + + ts->client = client; + ts->touch_ind_mode = 0; + init_waitqueue_head(&ts->wait); + + snprintf(ts->phys, sizeof(ts->phys), + "%s/input0", dev_name(&client->dev)); + + input_dev = input_allocate_device(); + if (!input_dev) { + dev_err(&client->dev, "could not allocate input device\n"); + goto err_input_alloc; + } + + ts->input = input_dev; + + input_dev->name = "AUO-Pixcir touchscreen"; + input_dev->phys = ts->phys; + input_dev->id.bustype = BUS_I2C; + input_dev->dev.parent = &client->dev; + + input_dev->open = auo_pixcir_input_open; + input_dev->close = auo_pixcir_input_close; + + __set_bit(EV_ABS, input_dev->evbit); + __set_bit(EV_KEY, input_dev->evbit); + + __set_bit(BTN_TOUCH, input_dev->keybit); + + /* For single touch */ + input_set_abs_params(input_dev, ABS_X, 0, pdata->x_max, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 0, pdata->y_max, 0, 0); + + /* For multi touch */ + input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0, + pdata->x_max, 0, 0); + input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0, + pdata->y_max, 0, 0); + input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, + AUO_PIXCIR_MAX_AREA, 0, 0); + input_set_abs_params(input_dev, ABS_MT_TOUCH_MINOR, 0, + AUO_PIXCIR_MAX_AREA, 0, 0); + input_set_abs_params(input_dev, ABS_MT_ORIENTATION, 0, 1, 0, 0); + + ret = i2c_smbus_read_byte_data(client, AUO_PIXCIR_REG_VERSION); + if (ret < 0) + goto err_fw_vers; + dev_info(&client->dev, "firmware version 0x%X\n", ret); + + ret = auo_pixcir_int_config(ts, pdata->int_setting); + if (ret) + goto err_fw_vers; + + input_set_drvdata(ts->input, ts); + ts->stopped = true; + + ret = request_threaded_irq(client->irq, NULL, auo_pixcir_interrupt, + IRQF_TRIGGER_RISING | IRQF_ONESHOT, + input_dev->name, ts); + if (ret) { + dev_err(&client->dev, "irq %d requested failed\n", client->irq); + goto err_fw_vers; + } + + /* stop device and put it into deep sleep until it is opened */ + ret = auo_pixcir_stop(ts); + if (ret < 0) + goto err_input_register; + + ret = input_register_device(input_dev); + if (ret) { + dev_err(&client->dev, "could not register input device\n"); + goto err_input_register; + } + + i2c_set_clientdata(client, ts); + + return 0; + +err_input_register: + free_irq(client->irq, ts); +err_fw_vers: + input_free_device(input_dev); +err_input_alloc: + if (pdata->exit_hw) + pdata->exit_hw(client); + gpio_free(pdata->gpio_int); +err_gpio_int: + kfree(ts); + + return ret; +} + +static int __devexit auo_pixcir_remove(struct i2c_client *client) +{ + struct auo_pixcir_ts *ts = i2c_get_clientdata(client); + const struct auo_pixcir_ts_platdata *pdata = client->dev.platform_data; + + free_irq(client->irq, ts); + + input_unregister_device(ts->input); + + if (pdata->exit_hw) + pdata->exit_hw(client); + + gpio_free(pdata->gpio_int); + + kfree(ts); + + return 0; +} + +static const struct i2c_device_id auo_pixcir_idtable[] = { + { "auo_pixcir_ts", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, auo_pixcir_idtable); + +static struct i2c_driver auo_pixcir_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "auo_pixcir_ts", + .pm = &auo_pixcir_pm_ops, + }, + .probe = auo_pixcir_probe, + .remove = __devexit_p(auo_pixcir_remove), + .id_table = auo_pixcir_idtable, +}; + +static int __init auo_pixcir_init(void) +{ + return i2c_add_driver(&auo_pixcir_driver); +} +module_init(auo_pixcir_init); + +static void __exit auo_pixcir_exit(void) +{ + i2c_del_driver(&auo_pixcir_driver); +} +module_exit(auo_pixcir_exit); + +MODULE_DESCRIPTION("AUO-PIXCIR touchscreen driver"); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Heiko Stuebner "); diff --git a/include/linux/input/auo-pixcir-ts.h b/include/linux/input/auo-pixcir-ts.h new file mode 100644 index 0000000000000000000000000000000000000000..75d4be717714c90cec93223606e8db8ab0e79a08 --- /dev/null +++ b/include/linux/input/auo-pixcir-ts.h @@ -0,0 +1,56 @@ +/* + * Driver for AUO in-cell touchscreens + * + * Copyright (c) 2011 Heiko Stuebner + * + * based on auo_touch.h from Dell Streak kernel + * + * Copyright (c) 2008 QUALCOMM Incorporated. + * Copyright (c) 2008 QUALCOMM USA, INC. + * + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __AUO_PIXCIR_TS_H__ +#define __AUO_PIXCIR_TS_H__ + +/* + * Interrupt modes: + * periodical: interrupt is asserted periodicaly + * compare coordinates: interrupt is asserted when coordinates change + * indicate touch: interrupt is asserted during touch + */ +#define AUO_PIXCIR_INT_PERIODICAL 0x00 +#define AUO_PIXCIR_INT_COMP_COORD 0x01 +#define AUO_PIXCIR_INT_TOUCH_IND 0x02 + +/* + * @gpio_int interrupt gpio + * @int_setting one of AUO_PIXCIR_INT_* + * @init_hw hardwarespecific init + * @exit_hw hardwarespecific shutdown + * @x_max x-resolution + * @y_max y-resolution + */ +struct auo_pixcir_ts_platdata { + int gpio_int; + + int int_setting; + + void (*init_hw)(struct i2c_client *); + void (*exit_hw)(struct i2c_client *); + + unsigned int x_max; + unsigned int y_max; +}; + +#endif