diff --git a/MAINTAINERS b/MAINTAINERS index 97bc927d2c5539ee7a430d134f0fbf3668aba113..65ad8251e4bc51a19acd189f425a346c31218296 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -239,6 +239,12 @@ L: linux-usb-devel@lists.sourceforge.net W: http://www.linux-usb.org/SpeedTouch/ S: Maintained +ALI1563 I2C DRIVER +P: Rudolf Marek +M: r.marek@sh.cvut.cz +L: sensors@stimpy.netroedge.com +S: Maintained + ALPHA PORT P: Richard Henderson M: rth@twiddle.net diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c index 35710818fe47cbfaf78b5070c59a4c85fabee641..fdd881aee618172df04f70977ee4cb4a57e7d58c 100644 --- a/drivers/i2c/busses/i2c-ali1563.c +++ b/drivers/i2c/busses/i2c-ali1563.c @@ -2,6 +2,7 @@ * i2c-ali1563.c - i2c driver for the ALi 1563 Southbridge * * Copyright (C) 2004 Patrick Mochel + * 2005 Rudolf Marek * * The 1563 southbridge is deceptively similar to the 1533, with a * few notable exceptions. One of those happens to be the fact they @@ -57,10 +58,11 @@ #define HST_CNTL2_BLOCK 0x05 +#define HST_CNTL2_SIZEMASK 0x38 static unsigned short ali1563_smba; -static int ali1563_transaction(struct i2c_adapter * a) +static int ali1563_transaction(struct i2c_adapter * a, int size) { u32 data; int timeout; @@ -73,7 +75,7 @@ static int ali1563_transaction(struct i2c_adapter * a) data = inb_p(SMB_HST_STS); if (data & HST_STS_BAD) { - dev_warn(&a->dev,"ali1563: Trying to reset busy device\n"); + dev_err(&a->dev, "ali1563: Trying to reset busy device\n"); outb_p(data | HST_STS_BAD,SMB_HST_STS); data = inb_p(SMB_HST_STS); if (data & HST_STS_BAD) @@ -94,19 +96,31 @@ static int ali1563_transaction(struct i2c_adapter * a) if (timeout && !(data & HST_STS_BAD)) return 0; - dev_warn(&a->dev, "SMBus Error: %s%s%s%s%s\n", - timeout ? "Timeout " : "", - data & HST_STS_FAIL ? "Transaction Failed " : "", - data & HST_STS_BUSERR ? "No response or Bus Collision " : "", - data & HST_STS_DEVERR ? "Device Error " : "", - !(data & HST_STS_DONE) ? "Transaction Never Finished " : ""); - if (!(data & HST_STS_DONE)) + if (!timeout) { + dev_err(&a->dev, "Timeout - Trying to KILL transaction!\n"); /* Issue 'kill' to host controller */ outb_p(HST_CNTL2_KILL,SMB_HST_CNTL2); - else - /* Issue timeout to reset all devices on bus */ + data = inb_p(SMB_HST_STS); + } + + /* device error - no response, ignore the autodetection case */ + if ((data & HST_STS_DEVERR) && (size != HST_CNTL2_QUICK)) { + dev_err(&a->dev, "Device error!\n"); + } + + /* bus collision */ + if (data & HST_STS_BUSERR) { + dev_err(&a->dev, "Bus collision!\n"); + /* Issue timeout, hoping it helps */ outb_p(HST_CNTL1_TIMEOUT,SMB_HST_CNTL1); + } + + if (data & HST_STS_FAIL) { + dev_err(&a->dev, "Cleaning fail after KILL!\n"); + outb_p(0x0,SMB_HST_CNTL2); + } + return -1; } @@ -149,7 +163,7 @@ static int ali1563_block_start(struct i2c_adapter * a) if (timeout && !(data & HST_STS_BAD)) return 0; - dev_warn(&a->dev, "SMBus Error: %s%s%s%s%s\n", + dev_err(&a->dev, "SMBus Error: %s%s%s%s%s\n", timeout ? "Timeout " : "", data & HST_STS_FAIL ? "Transaction Failed " : "", data & HST_STS_BUSERR ? "No response or Bus Collision " : "", @@ -242,13 +256,15 @@ static s32 ali1563_access(struct i2c_adapter * a, u16 addr, } outb_p(((addr & 0x7f) << 1) | (rw & 0x01), SMB_HST_ADD); - outb_p(inb_p(SMB_HST_CNTL2) | (size << 3), SMB_HST_CNTL2); + outb_p((inb_p(SMB_HST_CNTL2) & ~HST_CNTL2_SIZEMASK) | (size << 3), SMB_HST_CNTL2); /* Write the command register */ + switch(size) { case HST_CNTL2_BYTE: if (rw== I2C_SMBUS_WRITE) - outb_p(cmd, SMB_HST_CMD); + /* Beware it uses DAT0 register and not CMD! */ + outb_p(cmd, SMB_HST_DAT0); break; case HST_CNTL2_BYTE_DATA: outb_p(cmd, SMB_HST_CMD); @@ -268,7 +284,7 @@ static s32 ali1563_access(struct i2c_adapter * a, u16 addr, goto Done; } - if ((error = ali1563_transaction(a))) + if ((error = ali1563_transaction(a, size))) goto Done; if ((rw == I2C_SMBUS_WRITE) || (size == HST_CNTL2_QUICK))