diff --git a/Documentation/ABI/testing/sysfs-bus-pci b/Documentation/ABI/testing/sysfs-bus-pci index 1ce5ae329c048fa1f9c84523592d5bfc34c22614..5210a51c90fd33bcb48434cfea1055058dfc250e 100644 --- a/Documentation/ABI/testing/sysfs-bus-pci +++ b/Documentation/ABI/testing/sysfs-bus-pci @@ -64,7 +64,6 @@ Description: Writing a non-zero value to this attribute will force a rescan of all PCI buses in the system, and re-discover previously removed devices. - Depends on CONFIG_HOTPLUG. What: /sys/bus/pci/devices/.../msi_irqs/ Date: September, 2011 @@ -90,7 +89,6 @@ Contact: Linux PCI developers Description: Writing a non-zero value to this attribute will hot-remove the PCI device and any of its children. - Depends on CONFIG_HOTPLUG. What: /sys/bus/pci/devices/.../pci_bus/.../rescan Date: May 2011 @@ -99,7 +97,7 @@ Description: Writing a non-zero value to this attribute will force a rescan of the bus and all child buses, and re-discover devices removed earlier from this - part of the device tree. Depends on CONFIG_HOTPLUG. + part of the device tree. What: /sys/bus/pci/devices/.../rescan Date: January 2009 @@ -109,7 +107,6 @@ Description: force a rescan of the device's parent bus and all child buses, and re-discover devices removed earlier from this part of the device tree. - Depends on CONFIG_HOTPLUG. What: /sys/bus/pci/devices/.../reset Date: July 2009 diff --git a/Documentation/SubmitChecklist b/Documentation/SubmitChecklist index dc0e33210d7e74aebce76802952b914a04cbb8e5..2b7e32dfe00d95fadabc535372bea6ba343fdc59 100644 --- a/Documentation/SubmitChecklist +++ b/Documentation/SubmitChecklist @@ -105,5 +105,5 @@ kernel patches. same time, just various/random combinations of them]: CONFIG_SMP, CONFIG_SYSFS, CONFIG_PROC_FS, CONFIG_INPUT, CONFIG_PCI, - CONFIG_BLOCK, CONFIG_PM, CONFIG_HOTPLUG, CONFIG_MAGIC_SYSRQ, + CONFIG_BLOCK, CONFIG_PM, CONFIG_MAGIC_SYSRQ, CONFIG_NET, CONFIG_INET=n (but latter with CONFIG_NET=y) diff --git a/Documentation/cpu-hotplug.txt b/Documentation/cpu-hotplug.txt index 9f401350f5021ce61eda8c6ce0a386bc93109d18..0efd1b905b9dd8f909e9e7bd184af4e66cd1e0f5 100644 --- a/Documentation/cpu-hotplug.txt +++ b/Documentation/cpu-hotplug.txt @@ -128,7 +128,7 @@ A: When doing make defconfig, Enable CPU hotplug support "Processor type and Features" -> Support for Hotpluggable CPUs -Make sure that you have CONFIG_HOTPLUG, and CONFIG_SMP turned on as well. +Make sure that you have CONFIG_SMP turned on as well. You would need to enable CONFIG_HOTPLUG_CPU for SMP suspend/resume support as well. diff --git a/Documentation/hwmon/submitting-patches b/Documentation/hwmon/submitting-patches index 843751c41fea59d207497d991a67bba5af1ee617..46286460462b8dde8f89494c93c294d34022d311 100644 --- a/Documentation/hwmon/submitting-patches +++ b/Documentation/hwmon/submitting-patches @@ -27,8 +27,7 @@ increase the chances of your change being accepted. explicitly below the patch header. * If your patch (or the driver) is affected by configuration options such as - CONFIG_SMP or CONFIG_HOTPLUG, make sure it compiles for all configuration - variants. + CONFIG_SMP, make sure it compiles for all configuration variants. 2. Adding functionality to existing drivers diff --git a/Documentation/kbuild/kconfig.txt b/Documentation/kbuild/kconfig.txt index 3f429ed8b3b885a5a0af7d22d26c05cd9eac49e1..213859e69e88096fc9c45e60d6ddebd92f512e31 100644 --- a/Documentation/kbuild/kconfig.txt +++ b/Documentation/kbuild/kconfig.txt @@ -165,7 +165,7 @@ Searching in menuconfig: Example: /hotplug This lists all config symbols that contain "hotplug", - e.g., HOTPLUG, HOTPLUG_CPU, MEMORY_HOTPLUG. + e.g., HOTPLUG_CPU, MEMORY_HOTPLUG. For search help, enter / followed TAB-TAB-TAB (to highlight ) and Enter. This will tell you that you can also use diff --git a/Documentation/usb/hotplug.txt b/Documentation/usb/hotplug.txt index 4c945716a660d3e3884357409f1ab58c63fe9f92..6424b130485c5c26056191c09abe38c451b5f97a 100644 --- a/Documentation/usb/hotplug.txt +++ b/Documentation/usb/hotplug.txt @@ -33,9 +33,9 @@ you get the best hotplugging when you configure a highly modular system. KERNEL HOTPLUG HELPER (/sbin/hotplug) -When you compile with CONFIG_HOTPLUG, you get a new kernel parameter: -/proc/sys/kernel/hotplug, which normally holds the pathname "/sbin/hotplug". -That parameter names a program which the kernel may invoke at various times. +There is a kernel parameter: /proc/sys/kernel/hotplug, which normally +holds the pathname "/sbin/hotplug". That parameter names a program +which the kernel may invoke at various times. The /sbin/hotplug program can be invoked by any subsystem as part of its reaction to a configuration change, from a thread in that subsystem. diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 49d993cee51232874a81814fe39ca99e09b88bad..365e79f4fbf28ae3224568b111c5c11f040a2fbd 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1528,7 +1528,7 @@ config NR_CPUS config HOTPLUG_CPU bool "Support for hot-pluggable CPUs" - depends on SMP && HOTPLUG + depends on SMP help Say Y here to experiment with turning CPUs off and on. CPUs can be controlled through /sys/devices/system/cpu. diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index 1e9be5d25e56adcddb8ea4cff5997fc1698e72ce..85c3fb6c93c2e234769b17e559655d100ad923ab 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -288,24 +288,16 @@ int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs, if (strcmp(".ARM.exidx.init.text", secname) == 0) maps[ARM_SEC_INIT].unw_sec = s; - else if (strcmp(".ARM.exidx.devinit.text", secname) == 0) - maps[ARM_SEC_DEVINIT].unw_sec = s; else if (strcmp(".ARM.exidx", secname) == 0) maps[ARM_SEC_CORE].unw_sec = s; else if (strcmp(".ARM.exidx.exit.text", secname) == 0) maps[ARM_SEC_EXIT].unw_sec = s; - else if (strcmp(".ARM.exidx.devexit.text", secname) == 0) - maps[ARM_SEC_DEVEXIT].unw_sec = s; else if (strcmp(".init.text", secname) == 0) maps[ARM_SEC_INIT].txt_sec = s; - else if (strcmp(".devinit.text", secname) == 0) - maps[ARM_SEC_DEVINIT].txt_sec = s; else if (strcmp(".text", secname) == 0) maps[ARM_SEC_CORE].txt_sec = s; else if (strcmp(".exit.text", secname) == 0) maps[ARM_SEC_EXIT].txt_sec = s; - else if (strcmp(".devexit.text", secname) == 0) - maps[ARM_SEC_DEVEXIT].txt_sec = s; } for (i = 0; i < ARM_SEC_MAX; i++) diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index a871b8e00fca7d67141859bbb2415dadabbc1ad5..fa25e4e425f6070c0a6055de98271f865dde3823 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -70,10 +70,6 @@ SECTIONS ARM_EXIT_DISCARD(EXIT_TEXT) ARM_EXIT_DISCARD(EXIT_DATA) EXIT_CALL -#ifndef CONFIG_HOTPLUG - *(.ARM.exidx.devexit.text) - *(.ARM.extab.devexit.text) -#endif #ifndef CONFIG_MMU *(.fixup) *(__ex_table) diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig index 73a2d905af8ac1289be0711807a4392a954df479..30e1ebe3a8916e7f4fb9eb00397c180ea4786ff6 100644 --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig @@ -235,7 +235,6 @@ config IXP4XX_QMGR config IXP4XX_NPE tristate "IXP4xx Network Processor Engine support" select FW_LOADER - select HOTPLUG help This driver supports IXP4xx built-in network coprocessors and is automatically selected by Ethernet and HSS drivers. diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index a117652b5feaac84e4bb880bb8b1b4772c8b6f5a..b573827d0416b146b0308ba2043b4587df678e36 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -253,7 +253,7 @@ config NR_CPUS config HOTPLUG_CPU bool "Support for hot-pluggable CPUs" - depends on SMP && HOTPLUG + depends on SMP default y config BF_REV_MIN diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig index c55971a40c34e8433faa9fc70d12566feed21045..ab725edbc680adea502ea245a9ff70ea73e1cdf3 100644 --- a/arch/cris/arch-v32/drivers/Kconfig +++ b/arch/cris/arch-v32/drivers/Kconfig @@ -617,7 +617,6 @@ config ETRAX_PV_CHANGEABLE_BITS config ETRAX_CARDBUS bool "Cardbus support" depends on ETRAX_ARCH_V32 - select HOTPLUG help Enabled the ETRAX Cardbus driver. diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 1a2b7749b0478a75c49e58df2862de0765d71980..5a768ad8e893212cdab14e15edd1c8c6d3fe22b7 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -376,7 +376,6 @@ config NR_CPUS config HOTPLUG_CPU bool "Support for hot-pluggable CPUs" depends on SMP - select HOTPLUG default n ---help--- Say Y here to experiment with turning CPUs off and on. CPUs diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 7a58ab933b206a397c56b65f6a608fc4f9a1d8eb..e433b90507fb10a721e59a170be53d2859f28f32 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -962,7 +962,7 @@ config SYS_HAS_EARLY_PRINTK config HOTPLUG_CPU bool "Support for hot-pluggable CPUs" - depends on SMP && HOTPLUG && SYS_SUPPORTS_HOTPLUG_CPU + depends on SMP && SYS_SUPPORTS_HOTPLUG_CPU help Say Y here to allow turning CPUs off and on. CPUs can be controlled through /sys/devices/system/cpu. diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index 6507dabdd5ddc1a758e68f7476eb197fac9ec7b3..2a2aea5aae5bd7ba489c57e4cc9744752fd7c5f2 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig @@ -254,7 +254,6 @@ config IRQSTACKS config HOTPLUG_CPU bool default y if SMP - select HOTPLUG config ARCH_SELECT_MEMORY_MODEL def_bool y diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index c33e3ad2c8fd52c9e0c31dfc272faf3d34902f37..508e3fe934d2f112bebd82083db24f70b64f90b8 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -341,7 +341,7 @@ config SWIOTLB config HOTPLUG_CPU bool "Support for enabling/disabling CPUs" - depends on SMP && HOTPLUG && (PPC_PSERIES || \ + depends on SMP && (PPC_PSERIES || \ PPC_PMAC || PPC_POWERNV || (PPC_85xx && !PPC_E500MC)) ---help--- Say Y here to be able to disable and re-enable individual diff --git a/arch/powerpc/mm/tlb_hash64.c b/arch/powerpc/mm/tlb_hash64.c index 023ec8a13f38eed82e45fe37fc0f6e4be9518b83..7df1c5edda87fc88f5b388b185dbf3bde75ac571 100644 --- a/arch/powerpc/mm/tlb_hash64.c +++ b/arch/powerpc/mm/tlb_hash64.c @@ -183,8 +183,8 @@ void tlb_flush(struct mmu_gather *tlb) * since 64K pages may overlap with other bridges when using 64K pages * with 4K HW pages on IO space. * - * Because of that usage pattern, it's only available with CONFIG_HOTPLUG - * and is implemented for small size rather than speed. + * Because of that usage pattern, it is implemented for small size rather + * than speed. */ void __flush_hash_table_range(struct mm_struct *mm, unsigned long start, unsigned long end) diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index da183c5a103ce1df1da3617bbde788011f0351d3..22f75b504f7f9bb8ef91ef80e8a1433995e6c6dc 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -301,7 +301,6 @@ config HOTPLUG_CPU def_bool y prompt "Support for hot-pluggable CPUs" depends on SMP - select HOTPLUG help Say Y here to be able to turn CPUs off and on. CPUs can be controlled through /sys/devices/system/cpu/cpu#. diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 8c868cf2cf93febf478cc199e2a996ff64b244d1..1020dd85431aae9197f264c081d97b7e7e178ed7 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -748,7 +748,7 @@ config NR_CPUS config HOTPLUG_CPU bool "Support for hot-pluggable CPUs (EXPERIMENTAL)" - depends on SMP && HOTPLUG + depends on SMP help Say Y here to experiment with turning CPUs off and on. CPUs can be controlled through /sys/devices/system/cpu. diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index 9ac9f1666339015c3220631a4efe43226844b6d3..a00cbd356db5f4ae761a13de76730844ad67ae8e 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -243,7 +243,6 @@ config SECCOMP config HOTPLUG_CPU bool "Support for hot-pluggable CPUs" depends on SPARC64 && SMP - select HOTPLUG help Say Y here to experiment with turning CPUs off and on. CPUs can be controlled through /sys/devices/system/cpu/cpu#. diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 685692c94f051a8a7ad582442efcc3fa11173332..ae917f3965f1108c8043e67eecad7122a163725a 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -1725,7 +1725,7 @@ config PHYSICAL_ALIGN config HOTPLUG_CPU bool "Support for hot-pluggable CPUs" - depends on SMP && HOTPLUG + depends on SMP ---help--- Say Y here to allow turning CPUs off and on. CPUs can be controlled through /sys/devices/system/cpu. diff --git a/drivers/base/Kconfig b/drivers/base/Kconfig index 07abd9d76f7ff731eaef404c9eb84a3d227bc1e0..5daa2599ed48d3fad44223dc904d0cfdc2cbad09 100644 --- a/drivers/base/Kconfig +++ b/drivers/base/Kconfig @@ -2,7 +2,6 @@ menu "Generic Driver Options" config UEVENT_HELPER_PATH string "path to uevent helper" - depends on HOTPLUG default "" help Path to uevent helper program forked by the kernel for @@ -23,7 +22,6 @@ config UEVENT_HELPER_PATH config DEVTMPFS bool "Maintain a devtmpfs filesystem to mount at /dev" - depends on HOTPLUG help This creates a tmpfs/ramfs filesystem instance early at bootup. In this filesystem, the kernel driver core maintains device diff --git a/drivers/char/pcmcia/Kconfig b/drivers/char/pcmcia/Kconfig index 2a166d56738ac85947c0b6f4103750050d5ea7b1..b27f5342fe76157b5ebcf39077b981a3da180eb3 100644 --- a/drivers/char/pcmcia/Kconfig +++ b/drivers/char/pcmcia/Kconfig @@ -3,7 +3,7 @@ # menu "PCMCIA character devices" - depends on HOTPLUG && PCMCIA!=n + depends on PCMCIA!=n config SYNCLINK_CS tristate "SyncLink PC Card support" diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig index e443f2c1dfd1685ab0bcf88be945e898a5373a55..a697a64d53837bda97602e2948fb165f73a57312 100644 --- a/drivers/edac/Kconfig +++ b/drivers/edac/Kconfig @@ -145,7 +145,7 @@ config EDAC_E7XXX config EDAC_E752X tristate "Intel e752x (e7520, e7525, e7320) and 3100" - depends on EDAC_MM_EDAC && PCI && X86 && HOTPLUG + depends on EDAC_MM_EDAC && PCI && X86 help Support for error detection and correction on the Intel E7520, E7525, E7320 server chipsets. diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig index 6d51aa68ec7a635dc85e7e533d1de8ba0c0674ed..77497f140d68b5b356b9b23c918d19b21d483934 100644 --- a/drivers/pci/Kconfig +++ b/drivers/pci/Kconfig @@ -55,7 +55,6 @@ config PCI_STUB config XEN_PCIDEV_FRONTEND tristate "Xen PCI Frontend" depends on PCI && X86 && XEN - select HOTPLUG select PCI_XEN select XEN_XENBUS_FRONTEND default y @@ -113,7 +112,6 @@ config PCI_IOAPIC tristate "PCI IO-APIC hotplug support" if X86 depends on PCI depends on ACPI - depends on HOTPLUG default !X86 config PCI_LABEL diff --git a/drivers/pci/hotplug/Kconfig b/drivers/pci/hotplug/Kconfig index 9fcb87f353d44cec965301af6799fd8b950d8794..bb7ebb22db01e39a66840ba4684f811e7d89e075 100644 --- a/drivers/pci/hotplug/Kconfig +++ b/drivers/pci/hotplug/Kconfig @@ -4,7 +4,7 @@ menuconfig HOTPLUG_PCI tristate "Support for PCI Hotplug" - depends on PCI && HOTPLUG && SYSFS + depends on PCI && SYSFS ---help--- Say Y here if you have a motherboard with a PCI Hotplug controller. This allows you to add and remove PCI cards while the machine is diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig index b90f85bf5f811c098bfc01b9ed47ee8ee8c7bf00..1c6362491bdf63b38cbf35cde1827673b46d532f 100644 --- a/drivers/pcmcia/Kconfig +++ b/drivers/pcmcia/Kconfig @@ -4,7 +4,6 @@ menuconfig PCCARD tristate "PCCard (PCMCIA/CardBus) support" - depends on HOTPLUG ---help--- Say Y here if you want to attach PCMCIA- or PC-cards to your Linux computer. These are credit-card size devices such as network cards, diff --git a/drivers/staging/media/go7007/go7007.txt b/drivers/staging/media/go7007/go7007.txt index fcb3e235abbf6df0ae9e7e4bbfb53d333f298cc7..dc0026cff9f6bfc3527425e38e097d6392825cf2 100644 --- a/drivers/staging/media/go7007/go7007.txt +++ b/drivers/staging/media/go7007/go7007.txt @@ -78,7 +78,6 @@ All vendor-built kernels should already be configured properly. However, for custom-built kernels, the following options need to be enabled in the kernel as built-in or modules: - CONFIG_HOTPLUG - Support for hot-pluggable devices CONFIG_MODULES - Enable loadable module support CONFIG_KMOD - Automatic kernel module loading CONFIG_FW_LOADER - Hotplug firmware loading support diff --git a/fs/gfs2/Kconfig b/fs/gfs2/Kconfig index 5a376ab81feb9021620cdb13b0cd1642059ead43..90c6a8faaecba0cbd0d152956eae316c1a1e2474 100644 --- a/fs/gfs2/Kconfig +++ b/fs/gfs2/Kconfig @@ -20,13 +20,12 @@ config GFS2_FS be found here: http://sources.redhat.com/cluster The "nolock" lock module is now built in to GFS2 by default. If - you want to use the DLM, be sure to enable HOTPLUG and IPv4/6 - networking. + you want to use the DLM, be sure to enable IPv4/6 networking. config GFS2_FS_LOCKING_DLM bool "GFS2 DLM locking" depends on (GFS2_FS!=n) && NET && INET && (IPV6 || IPV6=n) && \ - HOTPLUG && CONFIGFS_FS && SYSFS && (DLM=y || DLM=GFS2_FS) + CONFIGFS_FS && SYSFS && (DLM=y || DLM=GFS2_FS) help Multiple node locking module for GFS2 diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h index eb58d2d7d9718d0c220387b3c60febf30f324e71..4f2737208c4275063702dbf6009cec6b600c4744 100644 --- a/include/asm-generic/vmlinux.lds.h +++ b/include/asm-generic/vmlinux.lds.h @@ -68,14 +68,6 @@ * are handled as text/data or they can be discarded (which * often happens at runtime) */ -#ifdef CONFIG_HOTPLUG -#define DEV_KEEP(sec) *(.dev##sec) -#define DEV_DISCARD(sec) -#else -#define DEV_KEEP(sec) -#define DEV_DISCARD(sec) *(.dev##sec) -#endif - #ifdef CONFIG_HOTPLUG_CPU #define CPU_KEEP(sec) *(.cpu##sec) #define CPU_DISCARD(sec) @@ -182,8 +174,6 @@ *(.data) \ *(.ref.data) \ *(.data..shared_aligned) /* percpu related */ \ - DEV_KEEP(init.data) \ - DEV_KEEP(exit.data) \ CPU_KEEP(init.data) \ CPU_KEEP(exit.data) \ MEM_KEEP(init.data) \ @@ -372,8 +362,6 @@ /* __*init sections */ \ __init_rodata : AT(ADDR(__init_rodata) - LOAD_OFFSET) { \ *(.ref.rodata) \ - DEV_KEEP(init.rodata) \ - DEV_KEEP(exit.rodata) \ CPU_KEEP(init.rodata) \ CPU_KEEP(exit.rodata) \ MEM_KEEP(init.rodata) \ @@ -416,8 +404,6 @@ *(.text.hot) \ *(.text) \ *(.ref.text) \ - DEV_KEEP(init.text) \ - DEV_KEEP(exit.text) \ CPU_KEEP(init.text) \ CPU_KEEP(exit.text) \ MEM_KEEP(init.text) \ @@ -503,7 +489,6 @@ /* init and exit section handling */ #define INIT_DATA \ *(.init.data) \ - DEV_DISCARD(init.data) \ CPU_DISCARD(init.data) \ MEM_DISCARD(init.data) \ KERNEL_CTORS() \ @@ -511,7 +496,6 @@ *(.init.rodata) \ FTRACE_EVENTS() \ TRACE_SYSCALLS() \ - DEV_DISCARD(init.rodata) \ CPU_DISCARD(init.rodata) \ MEM_DISCARD(init.rodata) \ CLK_OF_TABLES() \ @@ -521,14 +505,11 @@ #define INIT_TEXT \ *(.init.text) \ - DEV_DISCARD(init.text) \ CPU_DISCARD(init.text) \ MEM_DISCARD(init.text) #define EXIT_DATA \ *(.exit.data) \ - DEV_DISCARD(exit.data) \ - DEV_DISCARD(exit.rodata) \ CPU_DISCARD(exit.data) \ CPU_DISCARD(exit.rodata) \ MEM_DISCARD(exit.data) \ @@ -536,7 +517,6 @@ #define EXIT_TEXT \ *(.exit.text) \ - DEV_DISCARD(exit.text) \ CPU_DISCARD(exit.text) \ MEM_DISCARD(exit.text) diff --git a/init/Kconfig b/init/Kconfig index 9d3a7887a6d3e0b7a8323865b658e1d088dcea85..a5e0917165fe15bf6ad4957417df0c1f385f1983 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -1244,9 +1244,6 @@ config SYSCTL_ARCH_UNALIGN_ALLOW the unaligned access emulation. see arch/parisc/kernel/unaligned.c for reference -config HOTPLUG - def_bool y - config HAVE_PCSPKR_PLATFORM bool diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig index 5dfdc9ea180b8ac497ed915c45b809fb65799261..9c39de095ba905558d2f032278f63efa9d3ad081 100644 --- a/kernel/power/Kconfig +++ b/kernel/power/Kconfig @@ -100,7 +100,6 @@ config PM_SLEEP_SMP depends on SMP depends on ARCH_SUSPEND_POSSIBLE || ARCH_HIBERNATION_POSSIBLE depends on PM_SLEEP - select HOTPLUG select HOTPLUG_CPU config PM_AUTOSLEEP diff --git a/mm/Kconfig b/mm/Kconfig index e742d06285b780eea632efe643e18d695f766928..f5e698e30d4a230f6fe0b45e92892483507f3ade 100644 --- a/mm/Kconfig +++ b/mm/Kconfig @@ -173,7 +173,7 @@ config HAVE_BOOTMEM_INFO_NODE config MEMORY_HOTPLUG bool "Allow for memory hot-add" depends on SPARSEMEM || X86_64_ACPI_NUMA - depends on HOTPLUG && ARCH_ENABLE_MEMORY_HOTPLUG + depends on ARCH_ENABLE_MEMORY_HOTPLUG depends on (IA64 || X86 || PPC_BOOK3S_64 || SUPERH || S390) config MEMORY_HOTPLUG_SPARSE