Deal with the bloody KSEG vs CKSEG horror...

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

arch/mips/dec/ecc-berr.c

@@ -144,7 +144,8 @@ static int dec_ecc_be_backend(struct pt_regs *regs, int is_fixup, int invoker)
 			} else if (!sngl) {
 				status = dbestr;
 			} else {
-				volatile u32 *ptr = (void *)KSEG1ADDR(address);
+				volatile u32 *ptr =
+					(void *)CKSEG1ADDR(address);
 
 				*ptr = *ptr;		/* Rewrite. */
 				iob();

arch/mips/dec/prom/memory.c

@@ -35,22 +35,22 @@ static inline void pmax_setup_memory_region(void)
 	extern char genexcept_early;
 
 	/* Install exception handler */
-	memcpy(&old_handler, (void *)(KSEG0 + 0x80), 0x80);
-	memcpy((void *)(KSEG0 + 0x80), &genexcept_early, 0x80);
+	memcpy(&old_handler, (void *)(CKSEG0 + 0x80), 0x80);
+	memcpy((void *)(CKSEG0 + 0x80), &genexcept_early, 0x80);
 
 	/* read unmapped and uncached (KSEG1)
 	 * DECstations have at least 4MB RAM
 	 * Assume less than 480MB of RAM, as this is max for 5000/2xx
 	 * FIXME this should be replaced by the first free page!
 	 */
-	for (memory_page = (unsigned char *) KSEG1 + CHUNK_SIZE;
-	     (mem_err== 0) && (memory_page < ((unsigned char *) KSEG1+0x1E000000));
+	for (memory_page = (unsigned char *)CKSEG1 + CHUNK_SIZE;
+	     mem_err == 0 && memory_page < (unsigned char *)CKSEG1 + 0x1e00000;
   	     memory_page += CHUNK_SIZE) {
 		dummy = *memory_page;
 	}
-	memcpy((void *)(KSEG0 + 0x80), &old_handler, 0x80);
+	memcpy((void *)(CKSEG0 + 0x80), &old_handler, 0x80);
 
-	add_memory_region(0, (unsigned long)memory_page - KSEG1 - CHUNK_SIZE,
+	add_memory_region(0, (unsigned long)memory_page - CKSEG1 - CHUNK_SIZE,
 			  BOOT_MEM_RAM);
 }
 
@@ -65,7 +65,7 @@ static inline void rex_setup_memory_region(void)
 	memmap *bm;
 
 	/* some free 64k */
-	bm = (memmap *)KSEG0ADDR(0x28000);
+	bm = (memmap *)CKSEG0ADDR(0x28000);
 
 	bitmap_size = rex_getbitmap(bm);
 

arch/mips/dec/reset.c

@@ -14,7 +14,7 @@ typedef void ATTRIB_NORET (* noret_func_t)(void);
 
 static inline void ATTRIB_NORET back_to_prom(void)
 {
-	noret_func_t func = (void *) KSEG1ADDR(0x1fc00000);
+	noret_func_t func = (void *)CKSEG1ADDR(0x1fc00000);
 
 	func();
 }

drivers/tc/tc.c

@@ -197,7 +197,7 @@ void __init tc_init(void)
 	}
 
 	info = (tcinfo *) rex_gettcinfo();
-	slot0addr = (unsigned long)KSEG1ADDR(rex_slot_address(0));
+	slot0addr = (unsigned long)CKSEG1ADDR(rex_slot_address(0));
 
 	switch (mips_machtype) {
 	case MACH_DS5000_200:
@@ -245,7 +245,6 @@ void __init tc_init(void)
 					tc_bus[i].name, tc_bus[i].firmware);
 			}
 #endif
-		ioport_resource.end = KSEG2 - 1;
 	}
 }
 

drivers/tc/zs.c

@@ -1637,21 +1637,21 @@ static void __init probe_sccs(void)
 #ifdef CONFIG_MACH_DECSTATION
 	case MACH_DS5000_2X0:
 	case MACH_DS5900:
-		system_base = KSEG1ADDR(0x1f800000);
+		system_base = CKSEG1ADDR(0x1f800000);
 		n_chips = 2;
 		zs_parms = &ds_parms;
 		zs_parms->irq0 = dec_interrupt[DEC_IRQ_SCC0];
 		zs_parms->irq1 = dec_interrupt[DEC_IRQ_SCC1];
 		break;
 	case MACH_DS5000_1XX:
-		system_base = KSEG1ADDR(0x1c000000);
+		system_base = CKSEG1ADDR(0x1c000000);
 		n_chips = 2;
 		zs_parms = &ds_parms;
 		zs_parms->irq0 = dec_interrupt[DEC_IRQ_SCC0];
 		zs_parms->irq1 = dec_interrupt[DEC_IRQ_SCC1];
 		break;
 	case MACH_DS5000_XX:
-		system_base = KSEG1ADDR(0x1c000000);
+		system_base = CKSEG1ADDR(0x1c000000);
 		n_chips = 1;
 		zs_parms = &ds_parms;
 		zs_parms->irq0 = dec_interrupt[DEC_IRQ_SCC0];

include/asm-mips/dec/kn01.h

@@ -15,7 +15,7 @@
 
 #include <asm/addrspace.h>
 
-#define KN01_SLOT_BASE	KSEG1ADDR(0x10000000)
+#define KN01_SLOT_BASE	CKSEG1ADDR(0x10000000)
 #define KN01_SLOT_SIZE	0x01000000
 
 /*
@@ -51,7 +51,7 @@
 /*
  * Frame buffer memory address.
  */
-#define KN01_VFB_MEM	KSEG1ADDR(0x0fc00000)
+#define KN01_VFB_MEM	CKSEG1ADDR(0x0fc00000)
 
 /*
  * CPU interrupt bits.

include/asm-mips/dec/kn02.h

@@ -22,7 +22,7 @@
 #include <asm/dec/ecc.h>
 
 
-#define KN02_SLOT_BASE	KSEG1ADDR(0x1fc00000)
+#define KN02_SLOT_BASE	CKSEG1ADDR(0x1fc00000)
 #define KN02_SLOT_SIZE	0x00080000
 
 /*

include/asm-mips/dec/kn02xa.h

@@ -20,7 +20,7 @@
 #include <asm/addrspace.h>
 #include <asm/dec/ioasic_addrs.h>
 
-#define KN02XA_SLOT_BASE	KSEG1ADDR(0x1c000000)
+#define KN02XA_SLOT_BASE	CKSEG1ADDR(0x1c000000)
 
 /*
  * Some port addresses...
@@ -32,16 +32,16 @@
 /*
  * Memory control ASIC registers.
  */
-#define KN02XA_MER	KSEG1ADDR(0x0c400000)	/* memory error register */
-#define KN02XA_MSR	KSEG1ADDR(0x0c800000)	/* memory size register */
+#define KN02XA_MER	CKSEG1ADDR(0x0c400000)	/* memory error register */
+#define KN02XA_MSR	CKSEG1ADDR(0x0c800000)	/* memory size register */
 
 /*
  * CPU control ASIC registers.
  */
-#define KN02XA_MEM_CONF	KSEG1ADDR(0x0e000000)	/* write timeout config */
-#define KN02XA_EAR	KSEG1ADDR(0x0e000004)	/* error address register */
-#define KN02XA_BOOT0	KSEG1ADDR(0x0e000008)	/* boot 0 register */
-#define KN02XA_MEM_INTR	KSEG1ADDR(0x0e00000c)	/* write err IRQ stat & ack */
+#define KN02XA_MEM_CONF	CKSEG1ADDR(0x0e000000)	/* write timeout config */
+#define KN02XA_EAR	CKSEG1ADDR(0x0e000004)	/* error address register */
+#define KN02XA_BOOT0	CKSEG1ADDR(0x0e000008)	/* boot 0 register */
+#define KN02XA_MEM_INTR	CKSEG1ADDR(0x0e00000c)	/* write err IRQ stat & ack */
 
 /*
  * Memory Error Register bits, common definitions.

include/asm-mips/dec/kn03.h

@@ -19,7 +19,7 @@
 #include <asm/dec/ecc.h>
 #include <asm/dec/ioasic_addrs.h>
 
-#define KN03_SLOT_BASE	KSEG1ADDR(0x1f800000)
+#define KN03_SLOT_BASE	CKSEG1ADDR(0x1f800000)
 
 /*
  * Some port addresses...

include/asm-mips/dec/prom.h

@@ -24,7 +24,7 @@
  * PMAX/3MAX PROM entry points for DS2100/3100's and DS5000/2xx's.
  * Many of these will work for MIPSen as well!
  */
-#define VEC_RESET		(u64 *)KSEG1ADDR(0x1fc00000)
+#define VEC_RESET		(u64 *)CKSEG1ADDR(0x1fc00000)
 							/* Prom base address */
 
 #define PMAX_PROM_ENTRY(x)	(VEC_RESET + (x))	/* Prom jump table */