提交 34ddaa3e 编写于 作者: T Thomas Gleixner

powerpc/watchdog: Make use of watchdog_nmi_probe()

The rework of the core hotplug code triggers the WARN_ON in start_wd_cpu()
on powerpc because it is called multiple times for the boot CPU.

The first call is via:

  start_wd_on_cpu+0x80/0x2f0
  watchdog_nmi_reconfigure+0x124/0x170
  softlockup_reconfigure_threads+0x110/0x130
  lockup_detector_init+0xbc/0xe0
  kernel_init_freeable+0x18c/0x37c
  kernel_init+0x2c/0x160
  ret_from_kernel_thread+0x5c/0xbc

And then again via the CPU hotplug registration:

  start_wd_on_cpu+0x80/0x2f0
  cpuhp_invoke_callback+0x194/0x620
  cpuhp_thread_fun+0x7c/0x1b0
  smpboot_thread_fn+0x290/0x2a0
  kthread+0x168/0x1b0
  ret_from_kernel_thread+0x5c/0xbc

This can be avoided by setting up the cpu hotplug state with nocalls and
move the initialization to the watchdog_nmi_probe() function. That
initializes the hotplug callbacks without invoking the callback and the
following core initialization function then configures the watchdog for the
online CPUs (in this case CPU0) via softlockup_reconfigure_threads().
Reported-and-tested-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NMichael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: linuxppc-dev@lists.ozlabs.org
上级 e31d6883
......@@ -373,22 +373,21 @@ void watchdog_nmi_start(void)
}
/*
* This runs after lockup_detector_init() which sets up watchdog_cpumask.
* Invoked from core watchdog init.
*/
static int __init powerpc_watchdog_init(void)
int __init watchdog_nmi_probe(void)
{
int err;
watchdog_calc_timeouts();
err = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "powerpc/watchdog:online",
err = cpuhp_setup_state_nocalls(CPUHP_AP_ONLINE_DYN,
"powerpc/watchdog:online",
start_wd_on_cpu, stop_wd_on_cpu);
if (err < 0)
if (err < 0) {
pr_warn("Watchdog could not be initialized");
return err;
}
return 0;
}
arch_initcall(powerpc_watchdog_init);
static void handle_backtrace_ipi(struct pt_regs *regs)
{
......
......@@ -111,6 +111,7 @@ static inline int hardlockup_detector_perf_init(void) { return 0; }
void watchdog_nmi_stop(void);
void watchdog_nmi_start(void);
int watchdog_nmi_probe(void);
/**
* touch_nmi_watchdog - restart NMI watchdog timeout.
......
......@@ -608,7 +608,6 @@ static inline int watchdog_park_threads(void) { return 0; }
static inline void watchdog_unpark_threads(void) { }
static inline int watchdog_enable_all_cpus(void) { return 0; }
static inline void watchdog_disable_all_cpus(void) { }
static inline void softlockup_init_threads(void) { }
static void softlockup_reconfigure_threads(void)
{
cpus_read_lock();
......@@ -617,6 +616,10 @@ static void softlockup_reconfigure_threads(void)
watchdog_nmi_start();
cpus_read_unlock();
}
static inline void softlockup_init_threads(void)
{
softlockup_reconfigure_threads();
}
#endif /* !CONFIG_SOFTLOCKUP_DETECTOR */
static void __lockup_detector_cleanup(void)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册