diff --git a/arch/arm/boot/dts/mvebu-linkstation-fan.dtsi b/arch/arm/boot/dts/mvebu-linkstation-fan.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..e211a3c47a76cd378b80b7f0c20e09dff980f629 --- /dev/null +++ b/arch/arm/boot/dts/mvebu-linkstation-fan.dtsi @@ -0,0 +1,72 @@ +/* + * Device Tree common file for gpio-fan on Buffalo Linkstation + * + * Copyright (C) 2015, 2016 + * Roger Shimizu + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/ { + gpio_fan { + compatible = "gpio-fan"; + pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>; + pinctrl-names = "default"; + + gpio-fan,speed-map = + <0 3 + 1500 2 + 3250 1 + 5000 0>; + }; +}; + +&pinctrl { + pmx_fan_low: pmx-fan-low { + marvell,function = "gpio"; + }; + + pmx_fan_high: pmx-fan-high { + marvell,function = "gpio"; + }; + + pmx_fan_lock: pmx-fan-lock { + marvell,function = "gpio"; + }; +}; diff --git a/arch/arm/boot/dts/mvebu-linkstation-gpio-simple.dtsi b/arch/arm/boot/dts/mvebu-linkstation-gpio-simple.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..68d75e79a360b219258c034ea7f028651de4d1f2 --- /dev/null +++ b/arch/arm/boot/dts/mvebu-linkstation-gpio-simple.dtsi @@ -0,0 +1,105 @@ +/* + * Device Tree common file for gpio-{keys,leds} on Buffalo Linkstation + * + * Copyright (C) 2015, 2016 + * Roger Shimizu + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include + +/ { + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_power_switch>; + pinctrl-names = "default"; + + power-on-switch { + label = "Power-on Switch"; + linux,code = ; + linux,input-type = <5>; + }; + + power-auto-switch { + label = "Power-auto Switch"; + linux,code = ; + linux,input-type = <5>; + }; + }; + + gpio_leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pmx_led_power &pmx_led_alarm &pmx_led_info>; + pinctrl-names = "default"; + + blue-power-led { + label = "linkstation:blue:power"; + default-state = "keep"; + }; + + red-alarm-led { + label = "linkstation:red:alarm"; + }; + + amber-info-led { + label = "linkstation:amber:info"; + }; + }; +}; + +&pinctrl { + pmx_power_switch: pmx-power-switch { + marvell,function = "gpio"; + }; + + pmx_led_power: pmx-leds { + marvell,function = "gpio"; + }; + + pmx_led_alarm: pmx-leds { + marvell,function = "gpio"; + }; + + pmx_led_info: pmx-leds { + marvell,function = "gpio"; + }; +}; diff --git a/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts b/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts index aae8a7aceab75d53f84a2eb94fc0d6e020e773a9..0eead400f42770e46f44250ef1629cdb295a1422 100644 --- a/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts +++ b/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts @@ -45,9 +45,10 @@ /dts-v1/; +#include "orion5x-linkstation.dtsi" +#include "mvebu-linkstation-gpio-simple.dtsi" +#include "mvebu-linkstation-fan.dtsi" #include -#include -#include "orion5x-mv88f5182.dtsi" / { model = "Buffalo Linkstation LS-WTGL"; @@ -58,247 +59,93 @@ memory { /* 64 MB */ reg = <0x00000000 0x4000000>; }; - chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk"; - linux,stdout-path = &uart0; - }; - - soc { - ranges = , - , - ; - - internal-regs { - pinctrl: pinctrl@10000 { - pinctrl-names = "default"; - - pmx_led_power: pmx-leds { - marvell,pins = "mpp0"; - marvell,function = "gpio"; - }; - - pmx_led_alarm: pmx-leds { - marvell,pins = "mpp2"; - marvell,function = "gpio"; - }; - - pmx_led_info: pmx-leds { - marvell,pins = "mpp3"; - marvell,function = "gpio"; - }; - - pmx_power_hdd: pmx-power-hdd { - marvell,pins = "mpp1"; - marvell,function = "gpio"; - }; - - pmx_usb_power: pmx-usb-power { - marvell,pins = "mpp9"; - marvell,function = "gpio"; - }; - - pmx_sata0: pmx-sata0 { - marvell,pins = "mpp12"; - marvell,function = "sata0"; - }; - - pmx_sata1: pmx-sata1 { - marvell,pins = "mpp13"; - marvell,function = "sata1"; - }; - - pmx_fan_high: pmx-fan-high { - marvell,pins = "mpp14"; - marvell,function = "gpio"; - }; - - pmx_fan_low: pmx-fan-low { - marvell,pins = "mpp17"; - marvell,function = "gpio"; - }; - - pmx_fan_lock: pmx-fan-lock { - marvell,pins = "mpp6"; - marvell,function = "gpio"; - }; - - pmx_power_switch: pmx-power-switch { - marvell,pins = "mpp8", "mpp10"; - marvell,function = "gpio"; - }; - }; - }; - }; - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_power_switch>; - pinctrl-names = "default"; - - button@1 { - label = "Power-on Switch"; - linux,code = ; - linux,input-type = <5>; + power-on-switch { gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; }; - button@2 { - label = "Power-auto Switch"; - linux,code = ; - linux,input-type = <5>; + power-auto-switch { gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; }; }; gpio_leds { - compatible = "gpio-leds"; - pinctrl-0 = <&pmx_led_power &pmx_led_alarm - &pmx_led_info>; - pinctrl-names = "default"; - - led@1 { - label = "lswtgl:blue:power"; + blue-power-led { gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; - default-state = "keep"; }; - led@2 { - label = "lswtgl:red:alarm"; + red-alarm-led { gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; }; - led@3 { - label = "lswtgl:amber:info"; + amber-info-led { gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; }; }; gpio_fan { - compatible = "gpio-fan"; - pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>; - pinctrl-names = "default"; - gpios = <&gpio0 14 GPIO_ACTIVE_LOW &gpio0 17 GPIO_ACTIVE_LOW>; - gpio-fan,speed-map = <0 3 - 1500 2 - 3250 1 - 5000 0>; - alarm-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; }; +}; - restart_poweroff { - compatible = "restart-poweroff"; +&pinctrl { + pmx_led_power: pmx-leds { + marvell,pins = "mpp0"; + marvell,function = "gpio"; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_power_hdd &pmx_usb_power>; - pinctrl-names = "default"; - - usb_power: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "USB Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; - }; - - hdd_power: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "HDD Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; - }; + pmx_power_hdd: pmx-power-hdd { + marvell,pins = "mpp1"; + marvell,function = "gpio"; }; -}; - -&devbus_bootcs { - status = "okay"; - devbus,keep-config; - flash@0 { - compatible = "jedec-flash"; - reg = <0 0x40000>; - bank-width = <1>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - header@0 { - reg = <0 0x30000>; - read-only; - }; - - uboot@30000 { - reg = <0x30000 0xF000>; - read-only; - }; + pmx_led_alarm: pmx-leds { + marvell,pins = "mpp2"; + marvell,function = "gpio"; + }; - uboot_env@3F000 { - reg = <0x3F000 0x1000>; - }; - }; + pmx_led_info: pmx-leds { + marvell,pins = "mpp3"; + marvell,function = "gpio"; }; -}; -&mdio { - status = "okay"; + pmx_fan_lock: pmx-fan-lock { + marvell,pins = "mpp6"; + marvell,function = "gpio"; + }; - ethphy: ethernet-phy { - reg = <8>; + pmx_power_switch: pmx-power-switch { + marvell,pins = "mpp8", "mpp10"; + marvell,function = "gpio"; }; -}; -ð { - status = "okay"; + pmx_power_usb: pmx-power-usb { + marvell,pins = "mpp9"; + marvell,function = "gpio"; + }; - ethernet-port@0 { - phy-handle = <ðphy>; + pmx_fan_high: pmx-fan-high { + marvell,pins = "mpp14"; + marvell,function = "gpio"; }; -}; -&ehci0 { - status = "okay"; + pmx_fan_low: pmx-fan-low { + marvell,pins = "mpp17"; + marvell,function = "gpio"; + }; }; -&i2c { - status = "okay"; - - rtc { - compatible = "ricoh,rs5c372a"; - reg = <0x32>; - }; +&hdd_power { + gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; }; -&wdt { - status = "disabled"; +&usb_power { + gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; }; &sata { - pinctrl-0 = <&pmx_sata0 &pmx_sata1>; - pinctrl-names = "default"; - status = "okay"; nr-ports = <2>; }; - -&uart0 { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/orion5x-linkstation.dtsi b/arch/arm/boot/dts/orion5x-linkstation.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..ed456ab35fd84ae4eddd49dd9c2542bbfc5fcc0e --- /dev/null +++ b/arch/arm/boot/dts/orion5x-linkstation.dtsi @@ -0,0 +1,180 @@ +/* + * Device Tree common file for orion5x based Buffalo Linkstation + * + * Copyright (C) 2015, 2016 + * Roger Shimizu + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "orion5x-mv88f5182.dtsi" + +/ { + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + linux,stdout-path = &uart0; + }; + + soc { + ranges = , + , + ; + }; + + restart_poweroff { + compatible = "restart-poweroff"; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_power_usb &pmx_power_hdd>; + pinctrl-names = "default"; + + usb_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "USB Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + }; + + hdd_power: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "HDD Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + }; + }; +}; + +&pinctrl { + pmx_power_hdd: pmx-power-hdd { + marvell,function = "gpio"; + }; + + pmx_power_usb: pmx-power-usb { + marvell,function = "gpio"; + }; +}; + +&devbus_bootcs { + status = "okay"; + devbus,keep-config; + + flash@0 { + compatible = "jedec-flash"; + reg = <0 0x40000>; + bank-width = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + header@0 { + reg = <0 0x30000>; + read-only; + }; + + uboot@30000 { + reg = <0x30000 0xF000>; + read-only; + }; + + uboot_env@3F000 { + reg = <0x3F000 0x1000>; + }; + }; + }; +}; + +&mdio { + status = "okay"; + + ethphy: ethernet-phy { + reg = <8>; + }; +}; + +ð { + status = "okay"; + + ethernet-port@0 { + phy-handle = <ðphy>; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&i2c { + status = "okay"; + + rtc { + compatible = "ricoh,rs5c372a"; + reg = <0x32>; + }; +}; + +&wdt { + status = "disabled"; +}; + +&sata { + status = "okay"; + nr-ports = <1>; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +};