ide: add ide_tune_dma() helper

After reworking the code responsible for selecting the best DMA
transfer mode it is now possible to add generic ide_tune_dma() helper.

Convert some IDE PCI host drivers to use it (the ones left need more work).
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

drivers/ide/ide-dma.c

@@ -779,6 +779,26 @@ u8 ide_max_dma_mode(ide_drive_t *drive)
 
 EXPORT_SYMBOL_GPL(ide_max_dma_mode);
 
+int ide_tune_dma(ide_drive_t *drive)
+{
+	u8 speed;
+
+	/* TODO: use only ide_max_dma_mode() */
+	if (!ide_use_dma(drive))
+		return 0;
+
+	speed = ide_max_dma_mode(drive);
+
+	if (!speed)
+		return 0;
+
+	drive->hwif->speedproc(drive, speed);
+
+	return ide_dma_enable(drive);
+}
+
+EXPORT_SYMBOL_GPL(ide_tune_dma);
+
 void ide_dma_verbose(ide_drive_t *drive)
 {
 	struct hd_driveid *id	= drive->id;

drivers/ide/pci/aec62xx.c

@@ -155,17 +155,6 @@ static int aec62xx_tune_chipset (ide_drive_t *drive, u8 speed)
 	}
 }
 
-static int config_chipset_for_dma (ide_drive_t *drive)
-{
-	u8 speed = ide_max_dma_mode(drive);
-
-	if (!(speed))
-		return 0;
-
-	(void) aec62xx_tune_chipset(drive, speed);
-	return ide_dma_enable(drive);
-}
-
 static void aec62xx_tune_drive (ide_drive_t *drive, u8 pio)
 {
 	pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
@@ -174,7 +163,7 @@ static void aec62xx_tune_drive (ide_drive_t *drive, u8 pio)
 
 static int aec62xx_config_drive_xfer_rate (ide_drive_t *drive)
 {
-	if (ide_use_dma(drive) && config_chipset_for_dma(drive))
+	if (ide_tune_dma(drive))
 		return 0;
 
 	if (ide_use_fast_pio(drive))

drivers/ide/pci/atiixp.c

@@ -206,26 +206,6 @@ static int atiixp_speedproc(ide_drive_t *drive, u8 xferspeed)
 	return ide_config_drive_speed(drive, speed);
 }
 
-/**
- *	atiixp_config_drive_for_dma	-	configure drive for DMA
- *	@drive: IDE drive to configure
- *
- *	Set up a ATIIXP interface channel for the best available speed.
- *	We prefer UDMA if it is available and then MWDMA. If DMA is
- *	not available we switch to PIO and return 0.
- */
-
-static int atiixp_config_drive_for_dma(ide_drive_t *drive)
-{
-	u8 speed = ide_max_dma_mode(drive);
-
-	if (!speed)
-		return 0;
-
-	(void) atiixp_speedproc(drive, speed);
-	return ide_dma_enable(drive);
-}
-
 /**
  *	atiixp_dma_check	-	set up an IDE device
  *	@drive: IDE drive to configure
@@ -240,7 +220,7 @@ static int atiixp_dma_check(ide_drive_t *drive)
 
 	drive->init_speed = 0;
 
-	if (ide_use_dma(drive) && atiixp_config_drive_for_dma(drive))
+	if (ide_tune_dma(drive))
 		return 0;
 
 	if (ide_use_fast_pio(drive)) {

drivers/ide/pci/cs5535.c

@@ -164,26 +164,13 @@ static void cs5535_tuneproc(ide_drive_t *drive, u8 xferspeed)
 	cs5535_set_speed(drive, xferspeed);
 }
 
-static int cs5535_config_drive_for_dma(ide_drive_t *drive)
-{
-	u8 speed = ide_max_dma_mode(drive);
-
-	/* If no DMA speed was available then let dma_check hit pio */
-	if (!speed) {
-		return 0;
-	}
-
-	cs5535_set_drive(drive, speed);
-	return ide_dma_enable(drive);
-}
-
 static int cs5535_dma_check(ide_drive_t *drive)
 {
 	u8 speed;
 
 	drive->init_speed = 0;
 
-	if (ide_use_dma(drive) && cs5535_config_drive_for_dma(drive))
+	if (ide_tune_dma(drive))
 		return 0;
 
 	if (ide_use_fast_pio(drive)) {

drivers/ide/pci/hpt34x.c

@@ -84,29 +84,11 @@ static void hpt34x_tune_drive (ide_drive_t *drive, u8 pio)
 	(void) hpt34x_tune_chipset(drive, (XFER_PIO_0 + pio));
 }
 
-/*
- * This allows the configuration of ide_pci chipset registers
- * for cards that learn about the drive's UDMA, DMA, PIO capabilities
- * after the drive is reported by the OS.  Initially for designed for
- * HPT343 UDMA chipset by HighPoint|Triones Technologies, Inc.
- */
-
-static int config_chipset_for_dma (ide_drive_t *drive)
-{
-	u8 speed = ide_max_dma_mode(drive);
-
-	if (!(speed))
-		return 0;
-
-	(void) hpt34x_tune_chipset(drive, speed);
-	return ide_dma_enable(drive);
-}
-
 static int hpt34x_config_drive_xfer_rate (ide_drive_t *drive)
 {
 	drive->init_speed = 0;
 
-	if (ide_use_dma(drive) && config_chipset_for_dma(drive))
+	if (ide_tune_dma(drive))
 #ifndef CONFIG_HPT34X_AUTODMA
 		return -1;
 #else

drivers/ide/pci/hpt366.c

@@ -669,24 +669,6 @@ static void hpt3xx_tune_drive(ide_drive_t *drive, u8 pio)
 	(void) hpt3xx_tune_chipset (drive, XFER_PIO_0 + pio);
 }
 
-/*
- * This allows the configuration of ide_pci chipset registers
- * for cards that learn about the drive's UDMA, DMA, PIO capabilities
- * after the drive is reported by the OS.  Initially designed for
- * HPT366 UDMA chipset by HighPoint|Triones Technologies, Inc.
- *
- */
-static int config_chipset_for_dma(ide_drive_t *drive)
-{
-	u8 speed = ide_max_dma_mode(drive);
-
-	if (!speed)
-		return 0;
-
-	(void) hpt3xx_tune_chipset(drive, speed);
-	return ide_dma_enable(drive);
-}
-
 static int hpt3xx_quirkproc(ide_drive_t *drive)
 {
 	struct hd_driveid *id	= drive->id;
@@ -741,7 +723,7 @@ static int hpt366_config_drive_xfer_rate(ide_drive_t *drive)
 {
 	drive->init_speed = 0;
 
-	if (ide_use_dma(drive) && config_chipset_for_dma(drive))
+	if (ide_tune_dma(drive))
 		return 0;
 
 	if (ide_use_fast_pio(drive))

drivers/ide/pci/it8213.c

@@ -197,25 +197,6 @@ static int it8213_tune_chipset (ide_drive_t *drive, u8 xferspeed)
 	return ide_config_drive_speed(drive, speed);
 }
 
-/*
- *	config_chipset_for_dma	-	configure for DMA
- *	@drive: drive to configure
- *
- *	Called by the IDE layer when it wants the timings set up.
- */
-
-static int config_chipset_for_dma (ide_drive_t *drive)
-{
-	u8 speed = ide_max_dma_mode(drive);
-
-	if (!speed)
-		return 0;
-
-	it8213_tune_chipset(drive, speed);
-
-	return ide_dma_enable(drive);
-}
-
 /**
  *	it8213_configure_drive_for_dma	-	set up for DMA transfers
  *	@drive: drive we are going to set up
@@ -230,7 +211,7 @@ static int it8213_config_drive_for_dma (ide_drive_t *drive)
 {
 	u8 pio;
 
-	if (ide_use_dma(drive) && config_chipset_for_dma(drive))
+	if (ide_tune_dma(drive))
 		return 0;
 
 	pio = ide_get_best_pio_mode(drive, 255, 4, NULL);

drivers/ide/pci/jmicron.c

@@ -118,25 +118,6 @@ static int jmicron_tune_chipset (ide_drive_t *drive, byte xferspeed)
 	return ide_config_drive_speed(drive, speed);
 }
 
-/**
- *	config_chipset_for_dma	-	configure for DMA
- *	@drive: drive to configure
- *
- *	As the JMicron snoops for timings all we actually need to do is
- *	make sure we don't set an invalid mode.
- */
-
-static int config_chipset_for_dma (ide_drive_t *drive)
-{
-	u8 speed = ide_max_dma_mode(drive);
-
-	if (!speed)
-		return 0;
-
-	jmicron_tune_chipset(drive, speed);
-	return ide_dma_enable(drive);
-}
-
 /**
  *	jmicron_configure_drive_for_dma	-	set up for DMA transfers
  *	@drive: drive we are going to set up
@@ -147,7 +128,7 @@ static int config_chipset_for_dma (ide_drive_t *drive)
 
 static int jmicron_config_drive_for_dma (ide_drive_t *drive)
 {
-	if (ide_use_dma(drive) && config_chipset_for_dma(drive))
+	if (ide_tune_dma(drive))
 		return 0;
 
 	config_jmicron_chipset_for_pio(drive, 1);

drivers/ide/pci/piix.c

@@ -303,30 +303,6 @@ static int piix_tune_chipset (ide_drive_t *drive, u8 xferspeed)
 	return ide_config_drive_speed(drive, speed);
 }
 
-/**
- *	piix_config_drive_for_dma	-	configure drive for DMA
- *	@drive: IDE drive to configure
- *
- *	Set up a PIIX interface channel for the best available speed.
- *	We prefer UDMA if it is available and then MWDMA.  If DMA is
- *	not available we switch to PIO and return 0.
- */
- 
-static int piix_config_drive_for_dma (ide_drive_t *drive)
-{
-	u8 speed = ide_max_dma_mode(drive);
-
-	/*
-	 * If no DMA speed was available or the chipset has DMA bugs
-	 * then disable DMA and use PIO
-	 */
-	if (!speed)
-		return 0;
-
-	(void) piix_tune_chipset(drive, speed);
-	return ide_dma_enable(drive);
-}
-
 /**
  *	piix_config_drive_xfer_rate	-	set up an IDE device
  *	@drive: IDE drive to configure
@@ -339,7 +315,7 @@ static int piix_config_drive_xfer_rate (ide_drive_t *drive)
 {
 	drive->init_speed = 0;
 
-	if (ide_use_dma(drive) && piix_config_drive_for_dma(drive))
+	if (ide_tune_dma(drive))
 		return 0;
 
 	if (ide_use_fast_pio(drive))

drivers/ide/pci/sis5513.c

@@ -638,32 +638,13 @@ static void sis5513_tune_drive (ide_drive_t *drive, u8 pio)
 	(void) config_chipset_for_pio(drive, pio);
 }
 
-/*
- * ((id->hw_config & 0x4000|0x2000) && (HWIF(drive)->udma_four))
- */
-static int config_chipset_for_dma (ide_drive_t *drive)
-{
-	u8 speed = ide_max_dma_mode(drive);
-
-#ifdef DEBUG
-	printk("SIS5513: config_chipset_for_dma, drive %d, ultra %x\n",
-	       drive->dn, drive->id->dma_ultra);
-#endif
-
-	if (!(speed))
-		return 0;
-
-	sis5513_tune_chipset(drive, speed);
-	return ide_dma_enable(drive);
-}
-
 static int sis5513_config_xfer_rate(ide_drive_t *drive)
 {
 	config_art_rwp_pio(drive, 5);
 
 	drive->init_speed = 0;
 
-	if (ide_use_dma(drive) && config_chipset_for_dma(drive))
+	if (ide_tune_dma(drive))
 		return 0;
 
 	if (ide_use_fast_pio(drive))

drivers/ide/pci/slc90e66.c

@@ -160,22 +160,11 @@ static int slc90e66_tune_chipset (ide_drive_t *drive, u8 xferspeed)
 	return ide_config_drive_speed(drive, speed);
 }
 
-static int slc90e66_config_drive_for_dma (ide_drive_t *drive)
-{
-	u8 speed = ide_max_dma_mode(drive);
-
-	if (!speed)
-		return 0;
-
-	(void) slc90e66_tune_chipset(drive, speed);
-	return ide_dma_enable(drive);
-}
-
 static int slc90e66_config_drive_xfer_rate (ide_drive_t *drive)
 {
 	drive->init_speed = 0;
 
-	if (ide_use_dma(drive) && slc90e66_config_drive_for_dma(drive))
+	if (ide_tune_dma(drive))
 		return 0;
 
 	if (ide_use_fast_pio(drive))

drivers/ide/pci/tc86c001.c

@@ -167,20 +167,9 @@ static int tc86c001_busproc(ide_drive_t *drive, int state)
 	return 0;
 }
 
-static int config_chipset_for_dma(ide_drive_t *drive)
-{
-	u8 speed = ide_max_dma_mode(drive);
-
-	if (!speed)
-		return 0;
-
-	(void) tc86c001_tune_chipset(drive, speed);
-	return ide_dma_enable(drive);
-}
-
 static int tc86c001_config_drive_xfer_rate(ide_drive_t *drive)
 {
-	if (ide_use_dma(drive) && config_chipset_for_dma(drive))
+	if (ide_tune_dma(drive))
 		return 0;
 
 	if (ide_use_fast_pio(drive))

drivers/ide/pci/triflex.c

@@ -100,20 +100,9 @@ static void triflex_tune_drive(ide_drive_t *drive, u8 pio)
 	(void) triflex_tune_chipset(drive, (XFER_PIO_0 + use_pio));
 }
 
-static int triflex_config_drive_for_dma(ide_drive_t *drive)
-{
-	u8 speed = ide_max_dma_mode(drive);
-
-	if (!speed)
-		return 0;
-
-	(void) triflex_tune_chipset(drive, speed);
-	 return ide_dma_enable(drive);
-}
-
 static int triflex_config_drive_xfer_rate(ide_drive_t *drive)
 {
-	if (ide_use_dma(drive) && triflex_config_drive_for_dma(drive))
+	if (ide_tune_dma(drive))
 		return 0;
 
 	triflex_tune_drive(drive, 255);

include/linux/ide.h

@@ -1277,6 +1277,7 @@ int __ide_dma_bad_drive(ide_drive_t *);
 int __ide_dma_good_drive(ide_drive_t *);
 int ide_use_dma(ide_drive_t *);
 u8 ide_max_dma_mode(ide_drive_t *);
+int ide_tune_dma(ide_drive_t *);
 void ide_dma_off(ide_drive_t *);
 void ide_dma_verbose(ide_drive_t *);
 int ide_set_dma(ide_drive_t *);
@@ -1304,6 +1305,7 @@ extern int __ide_dma_timeout(ide_drive_t *);
 #else
 static inline int ide_use_dma(ide_drive_t *drive) { return 0; }
 static inline u8 ide_max_dma_mode(ide_drive_t *drive) { return 0; }
+static inline int ide_tune_dma(ide_drive_t *drive) { return 0; }
 static inline void ide_dma_off(ide_drive_t *drive) { ; }
 static inline void ide_dma_verbose(ide_drive_t *drive) { ; }
 static inline int ide_set_dma(ide_drive_t *drive) { return 1; }