siimage: add sil_* I/O ops

Add sil_iowrite{8,16,32}() and sil_ioread{8,16}() helpers, then use them to
merge code accessing configuration registers through PCI and MMIO together.

[ because of this SATA initialization bits from setup_mmio_siimage() are
  moved to init_chipset_siimage() ]

This also cuts code size a bit:

   text    data     bss     dec     hex filename
   4437     164       0    4601    11f9 drivers/ide/pci/siimage.o.before
   3979     164       0    4143    102f drivers/ide/pci/siimage.o.after

While at it:

* Use I/O ops directly instead of using ->IN{B,W} and ->OUT{B,W}.

* Fixup CodingStyle in setup_mmio_siimage().

* Rename 'tmpbyte' variable to 'tmp' in init_chipset_siimage().

There should be no functional changes caused by this patch.
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
上级 24a96ae0
......@@ -2,7 +2,7 @@
* Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org>
* Copyright (C) 2003 Red Hat <alan@redhat.com>
* Copyright (C) 2007 MontaVista Software, Inc.
* Copyright (C) 2007 Bartlomiej Zolnierkiewicz
* Copyright (C) 2007-2008 Bartlomiej Zolnierkiewicz
*
* May be copied or modified under the terms of the GNU General Public License
*
......@@ -124,6 +124,54 @@ static inline unsigned long siimage_seldev(ide_drive_t *drive, int r)
return base;
}
static u8 sil_ioread8(struct pci_dev *dev, unsigned long addr)
{
u8 tmp = 0;
if (pci_get_drvdata(dev))
tmp = readb((void __iomem *)addr);
else
pci_read_config_byte(dev, addr, &tmp);
return tmp;
}
static u16 sil_ioread16(struct pci_dev *dev, unsigned long addr)
{
u16 tmp = 0;
if (pci_get_drvdata(dev))
tmp = readw((void __iomem *)addr);
else
pci_read_config_word(dev, addr, &tmp);
return tmp;
}
static void sil_iowrite8(struct pci_dev *dev, u8 val, unsigned long addr)
{
if (pci_get_drvdata(dev))
writeb(val, (void __iomem *)addr);
else
pci_write_config_byte(dev, addr, val);
}
static void sil_iowrite16(struct pci_dev *dev, u16 val, unsigned long addr)
{
if (pci_get_drvdata(dev))
writew(val, (void __iomem *)addr);
else
pci_write_config_word(dev, addr, val);
}
static void sil_iowrite32(struct pci_dev *dev, u32 val, unsigned long addr)
{
if (pci_get_drvdata(dev))
writel(val, (void __iomem *)addr);
else
pci_write_config_dword(dev, addr, val);
}
/**
* sil_udma_filter - compute UDMA mask
* @drive: IDE device
......@@ -139,12 +187,9 @@ static u8 sil_pata_udma_filter(ide_drive_t *drive)
ide_hwif_t *hwif = drive->hwif;
struct pci_dev *dev = to_pci_dev(hwif->dev);
unsigned long base = (unsigned long) hwif->hwif_data;
u8 mask = 0, scsc = 0;
u8 mask = 0, scsc;
if (hwif->mmio)
scsc = hwif->INB(base + 0x4A);
else
pci_read_config_byte(dev, 0x8A, &scsc);
scsc = sil_ioread8(dev, base + (hwif->mmio ? 0x4A : 0x8A));
if ((scsc & 0x30) == 0x10) /* 133 */
mask = ATA_UDMA6;
......@@ -179,6 +224,7 @@ static void sil_set_pio_mode(ide_drive_t *drive, u8 pio)
const u16 data_speed[] = { 0x328a, 0x2283, 0x1104, 0x10c3, 0x10c1 };
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = to_pci_dev(hwif->dev);
ide_drive_t *pair = ide_get_paired_drive(drive);
u32 speedt = 0;
u16 speedp = 0;
......@@ -203,36 +249,20 @@ static void sil_set_pio_mode(ide_drive_t *drive, u8 pio)
speedp = data_speed[pio];
speedt = tf_speed[tf_pio];
if (hwif->mmio) {
hwif->OUTW(speedp, addr);
hwif->OUTW(speedt, tfaddr);
/* Now set up IORDY */
if (pio > 2)
hwif->OUTW(hwif->INW(tfaddr-2)|0x200, tfaddr-2);
else
hwif->OUTW(hwif->INW(tfaddr-2)&~0x200, tfaddr-2);
mode = hwif->INB(base + addr_mask);
mode &= ~(unit ? 0x30 : 0x03);
mode |= (unit ? 0x10 : 0x01);
hwif->OUTB(mode, base + addr_mask);
} else {
struct pci_dev *dev = to_pci_dev(hwif->dev);
sil_iowrite16(dev, speedp, addr);
sil_iowrite16(dev, speedt, tfaddr);
pci_write_config_word(dev, addr, speedp);
pci_write_config_word(dev, tfaddr, speedt);
pci_read_config_word(dev, tfaddr - 2, &speedp);
/* now set up IORDY */
speedp = sil_ioread16(dev, tfaddr - 2);
speedp &= ~0x200;
/* Set IORDY for mode 3 or 4 */
if (pio > 2)
speedp |= 0x200;
pci_write_config_word(dev, tfaddr - 2, speedp);
sil_iowrite16(dev, speedp, tfaddr - 2);
pci_read_config_byte(dev, addr_mask, &mode);
mode = sil_ioread8(dev, base + addr_mask);
mode &= ~(unit ? 0x30 : 0x03);
mode |= (unit ? 0x10 : 0x01);
pci_write_config_byte(dev, addr_mask, mode);
}
sil_iowrite8(dev, mode, base + addr_mask);
}
/**
......@@ -261,17 +291,10 @@ static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed)
unsigned long ma = siimage_seldev(drive, 0x08);
unsigned long ua = siimage_seldev(drive, 0x0C);
if (hwif->mmio) {
scsc = hwif->INB(base + 0x4A);
mode = hwif->INB(base + addr_mask);
multi = hwif->INW(ma);
ultra = hwif->INW(ua);
} else {
pci_read_config_byte(dev, 0x8A, &scsc);
pci_read_config_byte(dev, addr_mask, &mode);
pci_read_config_word(dev, ma, &multi);
pci_read_config_word(dev, ua, &ultra);
}
scsc = sil_ioread8(dev, base + (hwif->mmio ? 0x4A : 0x8A));
mode = sil_ioread8(dev, base + addr_mask);
multi = sil_ioread16(dev, ma);
ultra = sil_ioread16(dev, ua);
mode &= ~((unit) ? 0x30 : 0x03);
ultra &= ~0x3F;
......@@ -289,15 +312,9 @@ static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed)
mode |= (unit ? 0x20 : 0x02);
}
if (hwif->mmio) {
hwif->OUTB(mode, base + addr_mask);
hwif->OUTW(multi, ma);
hwif->OUTW(ultra, ua);
} else {
pci_write_config_byte(dev, addr_mask, mode);
pci_write_config_word(dev, ma, multi);
pci_write_config_word(dev, ua, ultra);
}
sil_iowrite8(dev, mode, base + addr_mask);
sil_iowrite16(dev, multi, ma);
sil_iowrite16(dev, ultra, ua);
}
/* returns 1 if dma irq issued, 0 otherwise */
......@@ -460,26 +477,21 @@ static unsigned int setup_mmio_siimage (struct pci_dev *dev, const char *name)
{
resource_size_t bar5 = pci_resource_start(dev, 5);
unsigned long barsize = pci_resource_len(dev, 5);
u8 tmpbyte = 0;
void __iomem *ioaddr;
u32 tmp, irq_mask;
/*
* Drop back to PIO if we can't map the mmio. Some
* systems seem to get terminally confused in the PCI
* spaces.
*/
if(!request_mem_region(bar5, barsize, name))
{
if (!request_mem_region(bar5, barsize, name)) {
printk(KERN_WARNING "siimage: IDE controller MMIO ports not available.\n");
return 0;
}
ioaddr = ioremap(bar5, barsize);
if (ioaddr == NULL)
{
if (ioaddr == NULL) {
release_mem_region(bar5, barsize);
return 0;
}
......@@ -487,62 +499,6 @@ static unsigned int setup_mmio_siimage (struct pci_dev *dev, const char *name)
pci_set_master(dev);
pci_set_drvdata(dev, (void *) ioaddr);
if (pdev_is_sata(dev)) {
/* make sure IDE0/1 interrupts are not masked */
irq_mask = (1 << 22) | (1 << 23);
tmp = readl(ioaddr + 0x48);
if (tmp & irq_mask) {
tmp &= ~irq_mask;
writel(tmp, ioaddr + 0x48);
readl(ioaddr + 0x48); /* flush */
}
writel(0, ioaddr + 0x148);
writel(0, ioaddr + 0x1C8);
}
writeb(0, ioaddr + 0xB4);
writeb(0, ioaddr + 0xF4);
tmpbyte = readb(ioaddr + 0x4A);
switch(tmpbyte & 0x30) {
case 0x00:
/* In 100 MHz clocking, try and switch to 133 */
writeb(tmpbyte|0x10, ioaddr + 0x4A);
break;
case 0x10:
/* On 133Mhz clocking */
break;
case 0x20:
/* On PCIx2 clocking */
break;
case 0x30:
/* Clocking is disabled */
/* 133 clock attempt to force it on */
writeb(tmpbyte & ~0x20, ioaddr + 0x4A);
break;
}
tmpbyte = readb(ioaddr + 0x4A);
writeb( 0x72, ioaddr + 0xA1);
writew( 0x328A, ioaddr + 0xA2);
writel(0x62DD62DD, ioaddr + 0xA4);
writel(0x43924392, ioaddr + 0xA8);
writel(0x40094009, ioaddr + 0xAC);
writeb( 0x72, ioaddr + 0xE1);
writew( 0x328A, ioaddr + 0xE2);
writel(0x62DD62DD, ioaddr + 0xE4);
writel(0x43924392, ioaddr + 0xE8);
writel(0x40094009, ioaddr + 0xEC);
if (pdev_is_sata(dev)) {
writel(0xFFFF0000, ioaddr + 0x108);
writel(0xFFFF0000, ioaddr + 0x188);
writel(0x00680000, ioaddr + 0x148);
writel(0x00680000, ioaddr + 0x1C8);
}
proc_reports_siimage(dev, (tmpbyte>>4), name);
return 1;
}
......@@ -557,50 +513,80 @@ static unsigned int setup_mmio_siimage (struct pci_dev *dev, const char *name)
static unsigned int __devinit init_chipset_siimage(struct pci_dev *dev, const char *name)
{
u8 rev = dev->revision, tmpbyte = 0, BA5_EN = 0;
unsigned long base, scsc_addr;
void __iomem *ioaddr = NULL;
u8 rev = dev->revision, tmp = 0, BA5_EN = 0;
pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, rev ? 1 : 255);
pci_read_config_byte(dev, 0x8A, &BA5_EN);
if ((BA5_EN & 0x01) || (pci_resource_start(dev, 5))) {
if (setup_mmio_siimage(dev, name)) {
return 0;
if ((BA5_EN & 0x01) || pci_resource_start(dev, 5)) {
if (setup_mmio_siimage(dev, name))
ioaddr = pci_get_drvdata(dev);
}
base = (unsigned long)ioaddr;
if (ioaddr && pdev_is_sata(dev)) {
u32 tmp32, irq_mask;
/* make sure IDE0/1 interrupts are not masked */
irq_mask = (1 << 22) | (1 << 23);
tmp32 = readl(ioaddr + 0x48);
if (tmp32 & irq_mask) {
tmp32 &= ~irq_mask;
writel(tmp32, ioaddr + 0x48);
readl(ioaddr + 0x48); /* flush */
}
writel(0, ioaddr + 0x148);
writel(0, ioaddr + 0x1C8);
}
pci_write_config_byte(dev, 0x80, 0x00);
pci_write_config_byte(dev, 0x84, 0x00);
pci_read_config_byte(dev, 0x8A, &tmpbyte);
switch(tmpbyte & 0x30) {
sil_iowrite8(dev, 0, base ? (base + 0xB4) : 0x80);
sil_iowrite8(dev, 0, base ? (base + 0xF4) : 0x84);
scsc_addr = base ? (base + 0x4A) : 0x8A;
tmp = sil_ioread8(dev, scsc_addr);
switch (tmp & 0x30) {
case 0x00:
/* 133 clock attempt to force it on */
pci_write_config_byte(dev, 0x8A, tmpbyte|0x10);
/* On 100MHz clocking, try and switch to 133MHz */
sil_iowrite8(dev, tmp | 0x10, scsc_addr);
break;
case 0x30:
/* if clocking is disabled */
/* 133 clock attempt to force it on */
pci_write_config_byte(dev, 0x8A, tmpbyte & ~0x20);
/* Clocking is disabled, attempt to force 133MHz clocking. */
sil_iowrite8(dev, tmp & ~0x20, scsc_addr);
case 0x10:
/* 133 already */
/* On 133Mhz clocking. */
break;
case 0x20:
/* BIOS set PCI x2 clocking */
/* On PCIx2 clocking. */
break;
}
pci_read_config_byte(dev, 0x8A, &tmpbyte);
tmp = sil_ioread8(dev, scsc_addr);
pci_write_config_byte(dev, 0xA1, 0x72);
pci_write_config_word(dev, 0xA2, 0x328A);
pci_write_config_dword(dev, 0xA4, 0x62DD62DD);
pci_write_config_dword(dev, 0xA8, 0x43924392);
pci_write_config_dword(dev, 0xAC, 0x40094009);
pci_write_config_byte(dev, 0xB1, 0x72);
pci_write_config_word(dev, 0xB2, 0x328A);
pci_write_config_dword(dev, 0xB4, 0x62DD62DD);
pci_write_config_dword(dev, 0xB8, 0x43924392);
pci_write_config_dword(dev, 0xBC, 0x40094009);
sil_iowrite8(dev, 0x72, base + 0xA1);
sil_iowrite16(dev, 0x328A, base + 0xA2);
sil_iowrite32(dev, 0x62DD62DD, base + 0xA4);
sil_iowrite32(dev, 0x43924392, base + 0xA8);
sil_iowrite32(dev, 0x40094009, base + 0xAC);
sil_iowrite8(dev, 0x72, base ? (base + 0xE1) : 0xB1);
sil_iowrite16(dev, 0x328A, base ? (base + 0xE2) : 0xB2);
sil_iowrite32(dev, 0x62DD62DD, base ? (base + 0xE4) : 0xB4);
sil_iowrite32(dev, 0x43924392, base ? (base + 0xE8) : 0xB8);
sil_iowrite32(dev, 0x40094009, base ? (base + 0xEC) : 0xBC);
if (base && pdev_is_sata(dev)) {
writel(0xFFFF0000, ioaddr + 0x108);
writel(0xFFFF0000, ioaddr + 0x188);
writel(0x00680000, ioaddr + 0x148);
writel(0x00680000, ioaddr + 0x1C8);
}
proc_reports_siimage(dev, tmp >> 4, name);
proc_reports_siimage(dev, (tmpbyte>>4), name);
return 0;
}
......@@ -752,12 +738,7 @@ static u8 __devinit sil_cable_detect(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
unsigned long addr = siimage_selreg(hwif, 0);
u8 ata66 = 0;
if (pci_get_drvdata(dev) == NULL)
pci_read_config_byte(dev, addr, &ata66);
else
ata66 = hwif->INB(addr);
u8 ata66 = sil_ioread8(dev, addr);
return (ata66 & 0x01) ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册