提交 0f1b5ca2 编写于 作者: A Andi Kleen 提交者: Ingo Molnar

perf/x86/intel: Add new cache events table for Haswell

Haswell offcore events are quite different from Sandy Bridge.
Add a new table to handle Haswell properly.

Note that the offcore bits listed in the SDM are not quite correct
(this is currently being fixed). An uptodate list of bits is
in the patch.

The basic setup is similar to Sandy Bridge. The prefetch columns
have been removed, as prefetch counting is not very reliable
on Haswell. One L1 event that is not in the event list anymore
has been also removed.

- data reads do not include code reads (comparable to earlier Sandy Bridge tables)
- data counts include speculative execution (except L1 write, dtlb, bpu)
- remote node access includes both remote memory, remote cache, remote mmio.
- prefetches are not included in the counts for consistency
  (different from Sandy Bridge, which includes prefetches in the remote node)
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
[ Removed the HSM30 comments; we don't have them for SNB/IVB either. ]
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1424225886-18652-1-git-send-email-andi@firstfloor.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
上级 30fdaa6b
......@@ -415,6 +415,196 @@ static __initconst const u64 snb_hw_cache_event_ids
};
/*
* Notes on the events:
* - data reads do not include code reads (comparable to earlier tables)
* - data counts include speculative execution (except L1 write, dtlb, bpu)
* - remote node access includes remote memory, remote cache, remote mmio.
* - prefetches are not included in the counts because they are not
* reliably counted.
*/
#define HSW_DEMAND_DATA_RD BIT_ULL(0)
#define HSW_DEMAND_RFO BIT_ULL(1)
#define HSW_ANY_RESPONSE BIT_ULL(16)
#define HSW_SUPPLIER_NONE BIT_ULL(17)
#define HSW_L3_MISS_LOCAL_DRAM BIT_ULL(22)
#define HSW_L3_MISS_REMOTE_HOP0 BIT_ULL(27)
#define HSW_L3_MISS_REMOTE_HOP1 BIT_ULL(28)
#define HSW_L3_MISS_REMOTE_HOP2P BIT_ULL(29)
#define HSW_L3_MISS (HSW_L3_MISS_LOCAL_DRAM| \
HSW_L3_MISS_REMOTE_HOP0|HSW_L3_MISS_REMOTE_HOP1| \
HSW_L3_MISS_REMOTE_HOP2P)
#define HSW_SNOOP_NONE BIT_ULL(31)
#define HSW_SNOOP_NOT_NEEDED BIT_ULL(32)
#define HSW_SNOOP_MISS BIT_ULL(33)
#define HSW_SNOOP_HIT_NO_FWD BIT_ULL(34)
#define HSW_SNOOP_HIT_WITH_FWD BIT_ULL(35)
#define HSW_SNOOP_HITM BIT_ULL(36)
#define HSW_SNOOP_NON_DRAM BIT_ULL(37)
#define HSW_ANY_SNOOP (HSW_SNOOP_NONE| \
HSW_SNOOP_NOT_NEEDED|HSW_SNOOP_MISS| \
HSW_SNOOP_HIT_NO_FWD|HSW_SNOOP_HIT_WITH_FWD| \
HSW_SNOOP_HITM|HSW_SNOOP_NON_DRAM)
#define HSW_SNOOP_DRAM (HSW_ANY_SNOOP & ~HSW_SNOOP_NON_DRAM)
#define HSW_DEMAND_READ HSW_DEMAND_DATA_RD
#define HSW_DEMAND_WRITE HSW_DEMAND_RFO
#define HSW_L3_MISS_REMOTE (HSW_L3_MISS_REMOTE_HOP0|\
HSW_L3_MISS_REMOTE_HOP1|HSW_L3_MISS_REMOTE_HOP2P)
#define HSW_LLC_ACCESS HSW_ANY_RESPONSE
static __initconst const u64 hsw_hw_cache_event_ids
[PERF_COUNT_HW_CACHE_MAX]
[PERF_COUNT_HW_CACHE_OP_MAX]
[PERF_COUNT_HW_CACHE_RESULT_MAX] =
{
[ C(L1D ) ] = {
[ C(OP_READ) ] = {
[ C(RESULT_ACCESS) ] = 0x81d0, /* MEM_UOPS_RETIRED.ALL_LOADS */
[ C(RESULT_MISS) ] = 0x151, /* L1D.REPLACEMENT */
},
[ C(OP_WRITE) ] = {
[ C(RESULT_ACCESS) ] = 0x82d0, /* MEM_UOPS_RETIRED.ALL_STORES */
[ C(RESULT_MISS) ] = 0x0,
},
[ C(OP_PREFETCH) ] = {
[ C(RESULT_ACCESS) ] = 0x0,
[ C(RESULT_MISS) ] = 0x0,
},
},
[ C(L1I ) ] = {
[ C(OP_READ) ] = {
[ C(RESULT_ACCESS) ] = 0x0,
[ C(RESULT_MISS) ] = 0x280, /* ICACHE.MISSES */
},
[ C(OP_WRITE) ] = {
[ C(RESULT_ACCESS) ] = -1,
[ C(RESULT_MISS) ] = -1,
},
[ C(OP_PREFETCH) ] = {
[ C(RESULT_ACCESS) ] = 0x0,
[ C(RESULT_MISS) ] = 0x0,
},
},
[ C(LL ) ] = {
[ C(OP_READ) ] = {
[ C(RESULT_ACCESS) ] = 0x1b7, /* OFFCORE_RESPONSE */
[ C(RESULT_MISS) ] = 0x1b7, /* OFFCORE_RESPONSE */
},
[ C(OP_WRITE) ] = {
[ C(RESULT_ACCESS) ] = 0x1b7, /* OFFCORE_RESPONSE */
[ C(RESULT_MISS) ] = 0x1b7, /* OFFCORE_RESPONSE */
},
[ C(OP_PREFETCH) ] = {
[ C(RESULT_ACCESS) ] = 0x0,
[ C(RESULT_MISS) ] = 0x0,
},
},
[ C(DTLB) ] = {
[ C(OP_READ) ] = {
[ C(RESULT_ACCESS) ] = 0x81d0, /* MEM_UOPS_RETIRED.ALL_LOADS */
[ C(RESULT_MISS) ] = 0x108, /* DTLB_LOAD_MISSES.MISS_CAUSES_A_WALK */
},
[ C(OP_WRITE) ] = {
[ C(RESULT_ACCESS) ] = 0x82d0, /* MEM_UOPS_RETIRED.ALL_STORES */
[ C(RESULT_MISS) ] = 0x149, /* DTLB_STORE_MISSES.MISS_CAUSES_A_WALK */
},
[ C(OP_PREFETCH) ] = {
[ C(RESULT_ACCESS) ] = 0x0,
[ C(RESULT_MISS) ] = 0x0,
},
},
[ C(ITLB) ] = {
[ C(OP_READ) ] = {
[ C(RESULT_ACCESS) ] = 0x6085, /* ITLB_MISSES.STLB_HIT */
[ C(RESULT_MISS) ] = 0x185, /* ITLB_MISSES.MISS_CAUSES_A_WALK */
},
[ C(OP_WRITE) ] = {
[ C(RESULT_ACCESS) ] = -1,
[ C(RESULT_MISS) ] = -1,
},
[ C(OP_PREFETCH) ] = {
[ C(RESULT_ACCESS) ] = -1,
[ C(RESULT_MISS) ] = -1,
},
},
[ C(BPU ) ] = {
[ C(OP_READ) ] = {
[ C(RESULT_ACCESS) ] = 0xc4, /* BR_INST_RETIRED.ALL_BRANCHES */
[ C(RESULT_MISS) ] = 0xc5, /* BR_MISP_RETIRED.ALL_BRANCHES */
},
[ C(OP_WRITE) ] = {
[ C(RESULT_ACCESS) ] = -1,
[ C(RESULT_MISS) ] = -1,
},
[ C(OP_PREFETCH) ] = {
[ C(RESULT_ACCESS) ] = -1,
[ C(RESULT_MISS) ] = -1,
},
},
[ C(NODE) ] = {
[ C(OP_READ) ] = {
[ C(RESULT_ACCESS) ] = 0x1b7, /* OFFCORE_RESPONSE */
[ C(RESULT_MISS) ] = 0x1b7, /* OFFCORE_RESPONSE */
},
[ C(OP_WRITE) ] = {
[ C(RESULT_ACCESS) ] = 0x1b7, /* OFFCORE_RESPONSE */
[ C(RESULT_MISS) ] = 0x1b7, /* OFFCORE_RESPONSE */
},
[ C(OP_PREFETCH) ] = {
[ C(RESULT_ACCESS) ] = 0x0,
[ C(RESULT_MISS) ] = 0x0,
},
},
};
static __initconst const u64 hsw_hw_cache_extra_regs
[PERF_COUNT_HW_CACHE_MAX]
[PERF_COUNT_HW_CACHE_OP_MAX]
[PERF_COUNT_HW_CACHE_RESULT_MAX] =
{
[ C(LL ) ] = {
[ C(OP_READ) ] = {
[ C(RESULT_ACCESS) ] = HSW_DEMAND_READ|
HSW_LLC_ACCESS,
[ C(RESULT_MISS) ] = HSW_DEMAND_READ|
HSW_L3_MISS|HSW_ANY_SNOOP,
},
[ C(OP_WRITE) ] = {
[ C(RESULT_ACCESS) ] = HSW_DEMAND_WRITE|
HSW_LLC_ACCESS,
[ C(RESULT_MISS) ] = HSW_DEMAND_WRITE|
HSW_L3_MISS|HSW_ANY_SNOOP,
},
[ C(OP_PREFETCH) ] = {
[ C(RESULT_ACCESS) ] = 0x0,
[ C(RESULT_MISS) ] = 0x0,
},
},
[ C(NODE) ] = {
[ C(OP_READ) ] = {
[ C(RESULT_ACCESS) ] = HSW_DEMAND_READ|
HSW_L3_MISS_LOCAL_DRAM|
HSW_SNOOP_DRAM,
[ C(RESULT_MISS) ] = HSW_DEMAND_READ|
HSW_L3_MISS_REMOTE|
HSW_SNOOP_DRAM,
},
[ C(OP_WRITE) ] = {
[ C(RESULT_ACCESS) ] = HSW_DEMAND_WRITE|
HSW_L3_MISS_LOCAL_DRAM|
HSW_SNOOP_DRAM,
[ C(RESULT_MISS) ] = HSW_DEMAND_WRITE|
HSW_L3_MISS_REMOTE|
HSW_SNOOP_DRAM,
},
[ C(OP_PREFETCH) ] = {
[ C(RESULT_ACCESS) ] = 0x0,
[ C(RESULT_MISS) ] = 0x0,
},
},
};
static __initconst const u64 westmere_hw_cache_event_ids
[PERF_COUNT_HW_CACHE_MAX]
[PERF_COUNT_HW_CACHE_OP_MAX]
......@@ -2520,8 +2710,8 @@ __init int intel_pmu_init(void)
case 69: /* 22nm Haswell ULT */
case 70: /* 22nm Haswell + GT3e (Intel Iris Pro graphics) */
x86_pmu.late_ack = true;
memcpy(hw_cache_event_ids, snb_hw_cache_event_ids, sizeof(hw_cache_event_ids));
memcpy(hw_cache_extra_regs, snb_hw_cache_extra_regs, sizeof(hw_cache_extra_regs));
memcpy(hw_cache_event_ids, hsw_hw_cache_event_ids, sizeof(hw_cache_event_ids));
memcpy(hw_cache_extra_regs, hsw_hw_cache_extra_regs, sizeof(hw_cache_extra_regs));
intel_pmu_lbr_init_hsw();
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册