#!/bin/bash
#	Filename:-		gp_bash_functions.sh
#	Status:-		Released
#	Author:-		G L Coombe (Greenplum)
#	Contact:-		gcoombe@greenplum.com
#	Release date:-		March 2006
#	Release stat:-		Greenplum Internal
#                               Copyright (c) Metapa 2005. All Rights Reserved.
#                               Copyright (c) Greenplum 2005. All Rights Reserved
#	Brief descn:-		Common functions used by various scripts
#***************************************************************
# Location Functions
#******************************************************************************
#Check that SHELL is /bin/bash
	if [ $SHELL != /bin/bash ] && [ `ls -al /bin/sh|grep -c bash` -ne 1 ];then
		echo "[FATAL]:-Scripts must be run by a user account that has SHELL=/bin/bash"
		if [ -f /bin/bash ];then
			echo "[INFO]:-/bin/bash exists, please update user account shell"
		else
			echo "[WARN]:-/bin/bash does not exist, does bash need to be installed?"
		fi
		exit 2
	fi
#CMDPATH is the list of locations to search for commands, in precedence order
declare -a CMDPATH
CMDPATH=(/usr/kerberos/bin /usr/sfw/bin /opt/sfw/bin /usr/local/bin /bin /usr/bin /sbin /usr/sbin /usr/ucb /sw/bin)

#GPPATH is the list of possible locations for the Greenplum Database binaries, in precedence order
declare -a GPPATH
GPPATH=( $GPHOME $MPPHOME $BIZHOME )
if [ ${#GPPATH[@]} -eq 0 ];then
	echo "[FATAL]:-GPHOME environment variable is required to run GPDB but could not be found."
	echo "Please set it by sourcing the  greenplum_path.sh  in your GPDB installation directory."
	echo "Example: ''. /usr/local/gpdb/greenplum_path.sh''"
	exit 2
fi

#GP_UNIQUE_COMMAND is used to identify the binary directory
GP_UNIQUE_COMMAND=gpstart


findCmdInPath() {
		cmdtofind=$1

		if [ $cmdtofind = 'awk' ] && [ `uname` = SunOS ]; then
			if [ -f "/usr/xpg4/bin/awk" ]; then
				CMD=/usr/xpg4/bin/awk
				echo $CMD
				return
			else
				echo $cmdtofind
				return "Problem in gp_bash_functions, command '/usr/xpg4/bin/awk' not found. You will need to edit the script named gp_bash_functions.sh to properly locate the needed commands for your platform."
			fi
		fi
		for pathel in ${CMDPATH[@]}
				do
				CMD=$pathel/$cmdtofind
				if [ x"$CMD" != x"" ] && [ -f $CMD ]; then
						echo $CMD
						return
				fi
		done
		echo $cmdtofind
		return "Problem in gp_bash_functions, command '$cmdtofind' not found in COMMAND path. You will need to edit the script named gp_bash_functions.sh to properly locate the needed commands for your platform."
}

findMppPath() {
		cmdtofind=$GP_UNIQUE_COMMAND

		for pathel in ${GPPATH[@]}
				do
				CMD=`find $pathel -follow -name $cmdtofind | tail -1`
				if [ x"$CMD" != x"" ] && [ -f $CMD ]; then
						echo $CMD
						return
				fi
		done
}

#******************************************************************************
# OS Command Variables
#******************************************************************************
AWK=`findCmdInPath awk`
BASENAME=`findCmdInPath basename`
CAT=`findCmdInPath cat`
CKSUM=`findCmdInPath cksum`
CUT=`findCmdInPath cut`
DATE=`findCmdInPath date`
DD=`findCmdInPath dd`
DIRNAME=`findCmdInPath dirname`
DF=`findCmdInPath df`
DU=`findCmdInPath du`
ECHO=`findCmdInPath echo`
FIND=`findCmdInPath find`
GREP=`findCmdInPath grep`
EGREP=`findCmdInPath egrep`
HEAD=`findCmdInPath head`
HOSTNAME=`findCmdInPath hostname`
IFCONFIG=`findCmdInPath ifconfig`
LESSCMD=`findCmdInPath less`
LOCALE=`findCmdInPath locale`
MV=`findCmdInPath mv`
MKDIR=`findCmdInPath mkdir`
NETSTAT=`findCmdInPath netstat`
PING=`findCmdInPath ping`
PS=`findCmdInPath ps`
PYTHON=${GPHOME}/ext/python/bin/python
RM=`findCmdInPath rm`
SCP=`findCmdInPath scp`
SED=`findCmdInPath sed`
SLEEP=`findCmdInPath sleep`
SORT=`findCmdInPath sort`
SSH=`findCmdInPath ssh`
TAIL=`findCmdInPath tail`
TEE=`findCmdInPath tee`
TOUCH=`findCmdInPath touch`
TR=`findCmdInPath tr`
WC=`findCmdInPath wc`
WHICH=`findCmdInPath which`
ZCAT=`findCmdInPath zcat`
#***************#******************************************************************************
# Script Specific Variables
#******************************************************************************
# By default set error logging level to verbose
VERBOSE=1
USER_NAME=`id|$AWK '{print $1}'|$CUT -d"(" -f2|$TR -d ')'`
PROG_NAME=`echo $0 | $TR -d '-'`
PROG_NAME=`$BASENAME $PROG_NAME`
PROG_PIDNAME=`echo $$ $PROG_NAME | awk '{printf "%06d %s\n", $1, $2}'`
CALL_HOST=`$HOSTNAME|$CUT -d. -f1`

#******************************************************************************
# Locate the postgres routines from the Greenplum release
#******************************************************************************
PSQLBIN=`findMppPath`

if [ x"$PSQLBIN" = x"" ];then
		echo "Problem in gp_bash_functions, command '$GP_UNIQUE_COMMAND' not found in Greenplum path."
		echo "Try setting GPHOME to the location of your Greenplum distribution."
		exit 99
fi

PSQLBIN=`$DIRNAME $PSQLBIN`
SCRIPTDIR="`$DIRNAME $PSQLBIN`/bin"
#******************************************************************************
# Greenplum Scripts
#******************************************************************************
GPINITSYSTEM=$SCRIPTDIR/gpinitsystem
GPCONFIG=$SCRIPTDIR/gpconfig
GPCRONDUMP=$SCRIPTDIR/gpcrondump
GPINITSTANDBY=$SCRIPTDIR/gpinitstandby
GPRECOVERSEG=$SCRIPTDIR/gprecoverseg
GPSTART=$SCRIPTDIR/gpstart
GPSTATE=$SCRIPTDIR/gpstate
GPSTOP=$SCRIPTDIR/gpstop
GPDOCDIR=${GPHOME}/docs/cli_help/
#******************************************************************************
# Greenplum Command Variables
#******************************************************************************
INITDB=$PSQLBIN/initdb
PG_CTL=$PSQLBIN/pg_ctl
PG_DUMP=$PSQLBIN/pg_dump
PG_DUMPALL=$PSQLBIN/pg_dumpall
PG_RESTORE=$PSQLBIN/pg_restore
PSQL=$PSQLBIN/psql


GPLISTDATABASEQTY="SELECT d.datname as \"Name\",
       r.rolname as \"Owner\",
       pg_catalog.pg_encoding_to_char(d.encoding) as \"Encoding\"
FROM pg_catalog.pg_database d
  JOIN pg_catalog.pg_authid r ON d.datdba = r.oid
ORDER BY 1;"
#******************************************************************************
# Greenplum OS Settings
#******************************************************************************
OS_OPENFILES=65535
#******************************************************************************
# General Variables
#******************************************************************************
HOSTFILE=/etc/hosts
PG_PID=postmaster.pid
PG_OPT=postmaster.opts
PG_CONF=postgresql.conf
PG_HBA=pg_hba.conf
if [ x"$TRUSTED_SHELL" = x"" ]; then TRUSTED_SHELL="$SSH"; fi
if [ x"$TRUSTED_COPY" = x"" ]; then TRUSTED_COPY="$SCP"; fi
PG_CONF_ADD_FILE=$WORKDIR/postgresql_conf_gp_additions
SCHEMA_FILE=cdb_schema.sql
DEFAULTDB=template1

CONFIG_TABLE="(SELECT dbid, content, role, preferred_role, mode, status,
               hostname, address, port, fselocation as datadir,
               replication_port, san_mounts
        FROM gp_segment_configuration
        JOIN pg_filespace_entry ON (dbid = fsedbid)
        JOIN pg_filespace fs ON (fs.oid = fsefsoid)
        WHERE fsname = 'pg_system')"

GP_PG_VIEW="(SELECT dbid, role = 'p' as isprimary, content, status = 'u' as valid,
		preferred_role = 'p' as definedprimary FROM gp_segment_configuration)"

DEFAULT_CHK_PT_SEG=8
DEFAULT_QD_MAX_CONNECT=250
QE_CONNECT_FACTOR=3
# DEFAULT_BUFFERS sets the default shared_buffers unless overridden by '-b'.
# It applies to the master db and segment dbs.  Specify either the number of
# buffers (without suffix) or the amount of memory to use for buffers (with
# case-insensitive suffix 'kB', 'MB' or 'GB').
DEFAULT_BUFFERS=128000kB
DEBUG_LEVEL=0
BATCH_DEFAULT=60
WAIT_LIMIT=1800
WARN_MARK="<<<<<"
#******************************************************************************
# Functions
#******************************************************************************

IN_ARRAY () {
    for v in $2; do
        if [ x"$1" == x"$v" ]; then
            return 1
        fi
    done
    return 0
}

LOG_MSG () {
		TIME=`$DATE +%H":"%M":"%S`
		CUR_DATE=`$DATE +%Y%m%d`
		DISPLAY_TXT=0
		#Check to see if we need to update value of EXIT_STATUS
		if [ `$ECHO $1|$AWK -F"]" '{print $1}'|$TR -d '\133'|$GREP -c "WARN"` -eq 1 ];then
			EXIT_STATUS=1
		fi
		if [ `$ECHO $1|$AWK -F"]" '{print $1}'|$TR -d '\133'|$GREP -c "FATAL"` -eq 1 ];then
			EXIT_STATUS=2
		fi
		WARN=`$ECHO $1|$AWK -F"]" '{print $1}'|$TR -d '\133'|$GREP -c "WARN"`
		if [ x"$WARN" == x"" ]; then
		    WARN=0
		fi
		if [ $WARN -eq 1 ];then
			EXIT_STATUS=1
		fi
		FATAL=`$ECHO $1|$AWK -F"]" '{print $1}'|$TR -d '\133'|$GREP -c "FATAL"`
		if [ x"$FATAL" == x"" ]; then
		    FATAL=0
		fi
		if [ $FATAL -eq 1 ];then
			EXIT_STATUS=2
		fi
		if [ x"" == x"$DEBUG_LEVEL" ];then
			DEBUG_LEVEL=1
		fi
		if [ $# -eq 2 ];then
			DISPLAY_TXT=1
		fi
		if [ $VERBOSE ]; then
				if [ $DEBUG_LEVEL -eq 1 ] || [ $DISPLAY_TXT -eq 1 ];then
			        $ECHO "${CUR_DATE}:${TIME}:${PROG_PIDNAME}:${CALL_HOST}:${USER_NAME}-$1" | $TEE -a $LOG_FILE
				else
				$ECHO "${CUR_DATE}:${TIME}:${PROG_PIDNAME}:${CALL_HOST}:${USER_NAME}-$1" >> $LOG_FILE
				fi
		else
				$ECHO "${CUR_DATE}:${TIME}:${PROG_PIDNAME}:${CALL_HOST}:${USER_NAME}-$1" >> $LOG_FILE
		fi
}

POSTGRES_VERSION_CHK() {
    LOG_MSG "[INFO]:-Start Function $FUNCNAME"
    HOST=$1;shift

    CURRENT_VERSION=`$EXPORT_GPHOME; $EXPORT_LIB_PATH; $GPHOME/bin/postgres --gp-version`
    VERSION_MATCH=0

    VER=`$TRUSTED_SHELL $HOST "$EXPORT_GPHOME; $EXPORT_LIB_PATH; $GPHOME/bin/postgres --gp-version"`
    if [ $? -ne 0 ] ; then
	LOG_MSG "[WARN]:- Failed to obtain postgres version on $HOST" 1
	EXIT_STATUS=1
	VERSION_MATCH=0
    fi
    LOG_MSG "[INFO]:- Current postgres version = $CURRENT_VERSION"
    LOG_MSG "[INFO]:- postgres version on $HOST = $VER"

    if [ x"$VER" != x"$CURRENT_VERSION" ] ; then
	LOG_MSG "[WARN]:-Postgres version does not match. [$CURRENT_VERSION != $VER]" 1
	VERSION_MATCH=0
	EXIT_STATUS=1
    else
	VERSION_MATCH=1
    fi


    LOG_MSG "[INFO]:-End Function $FUNCNAME"

}

ERROR_EXIT () {
	LOG_MSG "[INFO]:-Start Function $FUNCNAME"
		TIME=`$DATE +%H":"%M":"%S`
		CUR_DATE=`$DATE +%Y%m%d`
		$ECHO "${CUR_DATE}:${TIME}:${PROG_NAME}:${CALL_HOST}:${USER_NAME}-$1 Script Exiting!" >> $LOG_FILE
		$ECHO "${CUR_DATE}:${TIME}:${PROG_NAME}:${CALL_HOST}:${USER_NAME}-$1 Script Exiting!"
		DEBUG_LEVEL=1
		if [ $BACKOUT_FILE ]; then
				if [ -s $BACKOUT_FILE ]; then
						LOG_MSG "[WARN]:-Script has left Greenplum Database in an incomplete state"
						LOG_MSG "[WARN]:-Run command /bin/bash $BACKOUT_FILE to remove these changes"
						BACKOUT_COMMAND "if [ x$MASTER_HOSTNAME != x\`$HOSTNAME\` ];then $ECHO \"[FATAL]:-Not on original master host $MASTER_HOSTNAME, backout script exiting!\";exit 2;fi"
						$ECHO "$RM -f $BACKOUT_FILE" >> $BACKOUT_FILE
				fi
		fi
		exit $2
	LOG_MSG "[INFO]:-End Function $FUNCNAME"
}

ERROR_CHK () {
	LOG_MSG "[INFO]:-Start Function $FUNCNAME"
	if [ $# -ne 3 ];then
		INITIAL_LEVEL=$DEBUG_LEVEL
		DEBUG_LEVEL=1
		LOG_MSG "[WARN]:-Incorrect # parameters supplied to $FUNCNAME"
		DEBUG_LEVEL=$INITIAL_LEVEL
		return;fi
	RETVAL=$1;shift
	MSG_TXT=$1;shift
	ACTION=$1 #1=issue warn, 2=fatal
	if [ $RETVAL -eq 0 ];then
		LOG_MSG "[INFO]:-Successfully completed $MSG_TXT"
	else
		if [ $ACTION -eq 1 ];then
			INITIAL_LEVEL=$DEBUG_LEVEL
			DEBUG_LEVEL=1
			LOG_MSG "[WARN]:-Issue with $MSG_TXT"
			EXIT_STATUS=1
			DEBUG_LEVEL=$INITIAL_LEVEL
		else
			LOG_MSG "[INFO]:-End Function $FUNCNAME"
			ERROR_EXIT "[FATAL]:-Failed to complete $MSG_TXT " 2
		fi
	fi
	LOG_MSG "[INFO]:-End Function $FUNCNAME"
}

RETRY () {
	RETVAL=$?
	if [[ "$CURRENT" =~ "ssh" ]]; then
		for i in 2 4 8; do
			sleep $i
			LOG_MSG "[WARN]:-Retrying command -- $CURRENT"
			eval "$CURRENT"
			if [ $? = 0 ]; then
				RETVAL=0
				# There seems to be no way of grabbing the return code of a
				# trap other than saving it to a variable
				return
			fi
		done
	fi
}

SED_PG_CONF () {
	LOG_MSG "[INFO]:-Start Function $FUNCNAME"
	SED_TMP_FILE=/tmp/sed_text.$$
	APPEND=0
	FILENAME=$1;shift
	SEARCH_TXT=$1;shift
	SUB_TXT="$1";shift
	KEEP_PREV=$1;shift
	SED_HOST=$1
	if [ x"" == x"$SED_HOST" ]; then
			if [ `$GREP -c "${SEARCH_TXT}[ ]*=" $FILENAME` -gt 1 ]; then
				LOG_MSG "[INFO]:-Found more than 1 instance of $SEARCH_TXT in $FILENAME, will append" 1
				APPEND=1
			fi
			if [ `$GREP -c "${SEARCH_TXT}[ ]*=" $FILENAME` -eq 0 ] || [ $APPEND -eq 1 ]; then
				$ECHO $SUB_TXT >> $FILENAME
				RETVAL=$?
				if [ $RETVAL -ne 0 ]; then
					LOG_MSG "[WARN]:-Failed to append line $SUB_TXT to $FILENAME" 1
				else
					LOG_MSG "[INFO]:-Appended line $SUB_TXT to $FILENAME"
				fi
			else
				if [ $KEEP_PREV -eq 0 ];then
					$SED -i'.bak1' -e "s/${SEARCH_TXT}/${SUB_TXT} #${SEARCH_TXT}/" $FILENAME
				else
					$SED -i'.bak1' -e "s/${SEARCH_TXT}.*/${SUB_TXT}/" $FILENAME
				fi
				RETVAL=$?
				if [ $RETVAL -ne 0 ]; then
					ERROR_EXIT "[FATAL]:-Failed to replace $SEARCH_TXT in $FILENAME" 2
				else
					LOG_MSG "[INFO]:-Replaced line in $FILENAME"
					$RM -f ${FILENAME}.bak1
				fi
				$SED -i'.bak2' -e "s/^#${SEARCH_TXT}/${SEARCH_TXT}/" $FILENAME
				RETVAL=$?
				if [ $RETVAL -ne 0 ]; then
					ERROR_EXIT "[FATAL]:-Failed to replace #$SEARCH_TXT in $FILENAME" 2
				else
					LOG_MSG "[INFO]:-Replaced line in $FILENAME"
					$RM -f ${FILENAME}.bak2
				fi
			fi
	else
		# trap DEBUG will always be called first, when other traps are triggered.
		# We need to make sure that we save the current running command, so
		# that the RETRY function re-runs the command
		trap 'CURRENT=$BASH_COMMAND' DEBUG
		# Call out retry for commands that fail
		trap RETRY ERR
		RETVAL=0 # RETVAL gets modified in RETRY function whenever the trap is called

		if [ `$TRUSTED_SHELL $SED_HOST "$GREP -c \"${SEARCH_TXT}\" $FILENAME"` -gt 1 ]; then
			LOG_MSG "[INFO]:-Found more than 1 instance of $SEARCH_TXT in $FILENAME on $SED_HOST, will append" 1
			APPEND=1
		fi
		if [ `$TRUSTED_SHELL $SED_HOST "$GREP -c \"${SEARCH_TXT}\" $FILENAME"` -eq 0 ] || [ $APPEND -eq 1 ]; then
			$TRUSTED_SHELL $SED_HOST "$ECHO \"$SUB_TXT\" >> $FILENAME"
			if [ $RETVAL -ne 0 ]; then
				ERROR_EXIT "[FATAL]:-Failed to append line $SUB_TXT to $FILENAME on $SED_HOST" 2
			else
				LOG_MSG "[INFO]:-Appended line $SUB_TXT to $FILENAME on $SED_HOST" 1
			fi
		else
			if [ $KEEP_PREV -eq 0 ];then
				$ECHO "s/${SEARCH_TXT}/${SUB_TXT} #${SEARCH_TXT}/" > $SED_TMP_FILE
			else
				$ECHO "s/${SEARCH_TXT}.*/${SUB_TXT}/" > $SED_TMP_FILE
			fi
			$CAT $SED_TMP_FILE | $TRUSTED_SHELL ${SED_HOST} $DD of=$SED_TMP_FILE > /dev/null 2>&1
			$TRUSTED_SHELL $SED_HOST "sed -i'.bak1' -f $SED_TMP_FILE $FILENAME" > /dev/null 2>&1
			if [ $RETVAL -ne 0 ]; then
				ERROR_EXIT "[FATAL]:-Failed to insert $SUB_TXT in $FILENAME on $SED_HOST" 2
			else
				LOG_MSG "[INFO]:-Replaced line in $FILENAME on $SED_HOST"
				$TRUSTED_SHELL $SED_HOST "$RM -f ${FILENAME}.bak1" > /dev/null 2>&1
			fi
			$ECHO "s/^#${SEARCH_TXT}/${SEARCH_TXT}/" > $SED_TMP_FILE
			$CAT $SED_TMP_FILE | $TRUSTED_SHELL ${SED_HOST} $DD of=$SED_TMP_FILE > /dev/null 2>&1
			$TRUSTED_SHELL $SED_HOST "sed -i'.bak2' -f $SED_TMP_FILE $FILENAME" > /dev/null 2>&1
			if [ $RETVAL -ne 0 ]; then
				ERROR_EXIT "[FATAL]:-Failed to substitute #${SEARCH_TXT} in $FILENAME on $SED_HOST" 2
			else
				LOG_MSG "[INFO]:-Replaced line in $FILENAME on $SED_HOST"
				$TRUSTED_SHELL $SED_HOST "$RM -f ${FILENAME}.bak2" > /dev/null 2>&1
			fi
			$TRUSTED_SHELL $SED_HOST "$RM -f $SED_TMP_FILE"

			$RM -f $SED_TMP_FILE
		fi

		trap - ERR DEBUG # Disable trap
	fi
	LOG_MSG "[INFO]:-End Function $FUNCNAME"
}

CHK_EXTERNAL () {
	LOG_MSG "[INFO]:-Start Function $FUNCNAME"
	EXTERNAL=`$EXPORT_LIB_PATH;$PSQL -A -t -q -p  $MASTER_PORT -d "$QD_DBNAME" -c"select 1 from pg_exttable where reloid in (select oid from pg_class where relname='$TABLENAME' and relnamespace in (select oid from pg_namespace where nspname='$SCHEMA_NAME'));"|$WC -l`
	LOG_MSG "[INFO]:-End Function $FUNCNAME"
}

POSTGRES_PORT_CHK () {
	LOG_MSG "[INFO]:-Start Function $FUNCNAME"
	GET_PG_PID_ACTIVE $1 $2
	if [ $PID -ne 0 ];then
		ERROR_EXIT "[FATAL]:-Host $2 has an active database process on port = $1" 2
	fi
	LOG_MSG "[INFO]:-End Function $FUNCNAME"
}

CREATE_SPREAD_MIRROR_ARRAY () {
	LOG_MSG "[INFO]:-Start Function $FUNCNAME"
	((MAX_ARRAY=${#QE_PRIMARY_ARRAY[@]}-1))

	# Current host and subnet we are working on
	CURRENT_HOST=0
	CURRENT_SUBNET=0

	# Destination host and subnet
	DEST_HOST=0
	DEST_SUBNET=0

	if [ x"$NUM_MHOST_NODE" != x"" ] && [ $NUM_MHOST_NODE -gt 0 ] ; then
		((DIRS_PER_SUBNET=$NUM_DATADIR/$NUM_MHOST_NODE))
	else
		DIRS_PER_SUBNET=$NUM_DATADIR
	fi

	((MAX_SUBNET=$NUM_DATADIR/$DIRS_PER_SUBNET))
	((MAX_HOST=${#QE_PRIMARY_ARRAY[@]}/$NUM_DATADIR))

	SEGS_PROCESSED=0
	SEGS_PROCESSED_HOST=0


	# The following is heavily dependent on sort order of primary array.  This sort
	# order will be affected by hostnames so something non-standard will cause
	# strange behaviour.  This isn't new (just recording this fact for future generations)
	# and can be worked around with a mapping file to gpinitsystem (-I option).
	# The right way to do this would require us to connect to remote hosts, determine
	# what subnet we are on for that hostname and then build the array that way.  We *will*
	# do this once this is in python (or anything other than BASH)
	LOG_MSG "[INFO]:-Building spread mirror array type $MULTI_TXT, please wait..." 1
	for QE_LINE in ${QE_PRIMARY_ARRAY[@]}
	do
		if [ $DEBUG_LEVEL -eq 0 ] && [ x"" != x"$VERBOSE" ];then $NOLINE_ECHO ".\c";fi

		if [ $(($SEGS_PROCESSED%$NUM_DATADIR)) -eq 0 ] ; then
			# A new host group is starting
			if [ $SEGS_PROCESSED -ne 0 ] ; then ((CURRENT_HOST=$CURRENT_HOST+1)); fi
			# Start the mirroring on the next host
			((DEST_HOST=$CURRENT_HOST+1))
			# Always subnet "0" to start
			CURRENT_SUBNET=0
			DEST_SUBNET=1
			# Make sure we loop back when needed
			if [ $DEST_HOST -ge $MAX_HOST ] ; then DEST_HOST=0; fi
			SEGS_PROCESSED_HOST=0
		else
			# Continue with current host
			# move dest host to the next one (This is spread mirroring)
			((DEST_HOST=$DEST_HOST+1))
			# Make sure we look back when needed
			if [ $DEST_HOST -ge $MAX_HOST ] ; then DEST_HOST=0; fi
			# Get what subnet we are on, we may have moved to next
			((CURRENT_SUBNET=($SEGS_PROCESSED_HOST+1)/$DIRS_PER_SUBNET))
			((DEST_SUBNET=$CURRENT_SUBNET+1))
			# Handle looping over
			if [ $DEST_SUBNET -ge $MAX_SUBNET ] ; then DEST_SUBNET=0; fi
			# Increment the number of segments we've processed for this host
			((SEGS_PROCESSED_HOST=$SEGS_PROCESSED_HOST+1))
		fi

        # Handle the case where it's a single hostname (thus a single subnet)
		# This case will mainly be for QA testing
		if [ $NUM_DATADIR -eq $DIRS_PER_SUBNET ] ; then DEST_SUBNET=0; fi

		# Handle possible loop
		if [ $DEST_SUBNET -ge $MAX_SUBNET ] ; then DEST_SUBNET=0; fi

		# Calculate the index based on host and subnet number
		((PRIM_SEG_INDEX=($DEST_HOST*$NUM_DATADIR)+($DEST_SUBNET*$DIRS_PER_SUBNET)))

		QE_M_NAME=`$ECHO ${QE_PRIMARY_ARRAY[$PRIM_SEG_INDEX]}|$AWK -F"~" '{print $1}'`
		GP_M_DIR=${MIRROR_DATA_DIRECTORY[$SEGS_PROCESSED%$NUM_DATADIR]}
		P_PORT=`$ECHO $QE_LINE|$AWK -F"~" '{print $2}'`
		P_REPL_PORT=`$ECHO $QE_LINE|$AWK -F"~" '{print $6}'`
		((GP_M_PORT=$P_PORT+$MIRROR_OFFSET))
		((M_REPL_PORT=$P_REPL_PORT+$MIRROR_REPLICATION_PORT_OFFSET))
		M_CONTENT=`$ECHO $QE_LINE|$AWK -F"~" '{print $5}'`
		M_SEG=`$ECHO $QE_LINE|$AWK -F"~" '{print $3}'|$AWK -F"/" '{print $NF}'`
		QE_MIRROR_ARRAY=(${QE_MIRROR_ARRAY[@]} ${QE_M_NAME}~${GP_M_PORT}~${GP_M_DIR}/${M_SEG}~${DBID_COUNT}~${M_CONTENT}~${M_REPL_PORT})
		POSTGRES_PORT_CHK $GP_M_PORT $QE_M_NAME
		((DBID_COUNT=$DBID_COUNT+1))
		((SEGS_PROCESSED=$SEGS_PROCESSED+1))
	done
	if [ $DEBUG_LEVEL -eq 0 ] && [ x"" != x"$VERBOSE" ];then $ECHO;fi
	LOG_MSG "[INFO]:-End Function $FUNCNAME"
}

CREATE_GROUP_MIRROR_ARRAY () {
	LOG_MSG "[INFO]:-Start Function $FUNCNAME"
	LOG_MSG "[INFO]:-Building group mirror array type $MULTI_TXT, please wait..." 1
	PRI_HOST_COUNT=`$ECHO ${QE_PRIMARY_ARRAY[@]}|$TR ' ' '\n'|$AWK -F"~" '{print $1}'|$SORT -u|$WC -l`
	if [ $MULTI_HOME -eq 1 ] && [ $REMOTE_HOST_COUNT -eq 1 ];then
		PRI_HOST_COUNT=1
	fi

	if [ x"$NUM_MHOST_NODE" != x"" ] && [ $NUM_MHOST_NODE -gt 0 ] ; then
		((DIRS_PER_SUBNET=$NUM_DATADIR/$NUM_MHOST_NODE))
	else
		DIRS_PER_SUBNET=$NUM_DATADIR
	fi
	((MAX_SUBNET=$NUM_DATADIR/$DIRS_PER_SUBNET))
	((MAX_HOST=${#QE_PRIMARY_ARRAY[@]}/$NUM_DATADIR))

	# Current host we are working on
	CURRENT_HOST=0

	# Destination host and subnet
	DEST_HOST=0
	DEST_SUBNET=0

	PRIMARY_ARRAY_LENGTH=${#QE_PRIMARY_ARRAY[@]}
	PRIMARY_INDEX=0

	for QE_LINE in ${QE_PRIMARY_ARRAY[@]}
	do
		if [ $(($PRIMARY_INDEX%$NUM_DATADIR)) -eq 0 ] ; then
			if [ $PRIMARY_INDEX -ne 0 ] ; then ((CURRENT_HOST=$CURRENT_HOST+1)); fi
			((DEST_HOST=$CURRENT_HOST+1))
			if [ $DEST_HOST -ge $MAX_HOST ] ; then DEST_HOST=0; fi
			DEST_SUBNET=1
		else
			if [ $(($PRIMARY_INDEX%$DIRS_PER_SUBNET)) -eq 0 ] ; then
				((DEST_SUBNET=$DEST_SUBNET+1))
			fi
		fi

		# Handle possible loop
		if [ $DEST_SUBNET -ge $MAX_SUBNET ] ; then DEST_SUBNET=0; fi

		((MIRROR_INDEX=($DEST_HOST*$NUM_DATADIR)+($DEST_SUBNET*$DIRS_PER_SUBNET)))

		if [ $DEBUG_LEVEL -eq 0 ] && [ x"" != x"$VERBOSE" ];then $NOLINE_ECHO ".\c";fi

		QE_M_NAME=`$ECHO ${QE_PRIMARY_ARRAY[$MIRROR_INDEX]}|$AWK -F"~" '{print $1}'`
		GP_M_DIR=${MIRROR_DATA_DIRECTORY[$PRIMARY_INDEX%$NUM_DATADIR]}/`$ECHO $QE_LINE|$AWK -F"~" '{print $3}'|$AWK -F"/" '{print $NF}'`

		M_CONTENT=`$ECHO $QE_LINE|$AWK -F"~" '{print $5}'`
		P_PORT=`$ECHO $QE_LINE|$AWK -F"~" '{print $2}'`
		P_REPL_PORT=`$ECHO $QE_LINE|$AWK -F"~" '{print $6}'`
		GP_M_PORT=$(($P_PORT+$MIRROR_OFFSET))
		M_REPL_PORT=$(($P_REPL_PORT+$MIRROR_REPLICATION_PORT_OFFSET))

		QE_MIRROR_ARRAY=(${QE_MIRROR_ARRAY[@]} ${QE_M_NAME}~${GP_M_PORT}~${GP_M_DIR}~${DBID_COUNT}~${M_CONTENT}~${M_REPL_PORT})
		POSTGRES_PORT_CHK $GP_M_PORT $QE_M_NAME

		DBID_COUNT=$(($DBID_COUNT+1))
	    PRIMARY_INDEX=$((PRIMARY_INDEX+1))
	done
	if [ $DEBUG_LEVEL -eq 0 ] && [ x"" != x"$VERBOSE" ];then $ECHO;fi
	LOG_MSG "[INFO]:-End Function $FUNCNAME"
}

GET_REPLY () {
	$ECHO -e "\n$1 Yy|Nn (default=N):"
	$ECHO -n "> "
	read REPLY
	if [ -z $REPLY ]; then
		LOG_MSG "[WARN]:-User abort requested, Script Exits!" 1
		exit 1
	fi
	if [ $REPLY != Y ] && [ $REPLY != y ]; then
		LOG_MSG "[WARN]:-User abort requested, Script Exits!" 1
		exit 1
	fi
}

CHK_MULTI_HOME () {
	LOG_MSG "[INFO]:-Start Function $FUNCNAME"
	GET_QE_DETAILS
	MULTI_ARRAY=()
	J=0
	if [ x"" == x"$1" ];then
		#Select two hosts to test as we do not want to do the whole array
		LOG_MSG "[INFO]:-Obtaining GPDB array type, [Brief], please wait..." 1
		while [ $J -lt 2 ]
		do
			QE_HOST=`$ECHO ${QE_ARRAY[$J]}|$AWK -F"|" '{print $1}'`
			REMOTE_HOSTNAME=`$TRUSTED_SHELL $QE_HOST "$HOSTNAME"`
			MULTI_ARRAY=(${MULTI_ARRAY[@]} ${QE_HOST}:$REMOTE_HOSTNAME)
			((J=$J+1))
		done
	else
		LOG_MSG "[INFO]:-Obtaining GPDB array type, [Full], please wait..." 1
		for QE_LINE in ${QE_ARRAY[@]}
		do
			QE_HOST=`$ECHO $QE_LINE|$AWK -F"|" '{print $1}'`
			REMOTE_HOSTNAME=`$TRUSTED_SHELL $QE_HOST "$HOSTNAME"`
			MULTI_ARRAY=(${MULTI_ARRAY[@]} ${QE_HOST}:$REMOTE_HOSTNAME)
		done
	fi
	SEG_HOST_COUNT=`$ECHO ${MULTI_ARRAY[@]}|$TR ' ' '\n'|$AWK -F"~" '{print $1}'|$SORT -u|wc -l`
	REMOTE_HOST_COUNT=`$ECHO ${MULTI_ARRAY[@]}|$TR ' ' '\n'|$AWK -F"~" '{print $2}'|$SORT -u|wc -l`
	if [ $SEG_HOST_COUNT -eq $REMOTE_HOST_COUNT ];then
		LOG_MSG "[INFO]:-Non multi-home configuration"
		MULTI_HOME=0
		MULTI_TXT="Standard"
	else
		LOG_MSG "[INFO]:-Multi-home configuration"
		MULTI_HOME=1
		MULTI_TXT="Multi-home"
	fi
	LOG_MSG "[INFO]:-End Function $FUNCNAME"
}

CHK_FILE () {
		LOG_MSG "[INFO]:-Start Function $FUNCNAME"
		FILENAME=$1
		FILE_HOST=$2
		if [ x"" == x"$FILE_HOST" ];then
			LOG_MSG "[INFO]:-Checking file $FILENAME"
			if [ ! -s $FILENAME ] || [ ! -r $FILENAME ]
					then
					EXISTS=1
			else
					EXISTS=0
			fi
		else
			EXISTS=`$TRUSTED_SHELL $FILE_HOST "if [ ! -s $FILENAME ] || [ ! -r $FILENAME ];then $ECHO 1;else $ECHO 0;fi"`
			RETVAL=$?
			if [ $RETVAL -ne 0 ];then
				LOG_MSG "[WARN]:-Failed to obtain details of $FILENAME on $FILE_HOST"
				EXIT_STATUS=1
				EXISTS=1
			fi
		fi
		LOG_MSG "[INFO]:-End Function $FUNCNAME"
}
CHK_DIR () {
		# this function might be called very early, before logfiles are initialized
		if [ x"" == x"$3" ];then
			LOG_MSG "[INFO]:-Start Function $FUNCNAME"
		fi
		DIR_NAME=$1
		DIR_HOST=$2
		if [ x"" == x"$DIR_HOST" ];then
			EXISTS=`if [ -d $DIR_NAME ];then $ECHO 0;else $ECHO 1;fi`
		else
			EXISTS=`$TRUSTED_SHELL $DIR_HOST "if [ -d $DIR_NAME ];then $ECHO 0;else $ECHO 1;fi"`
			RETVAL=$?
			if [ $RETVAL -ne 0 ];then
			LOG_MSG "[WARN]:-Failed to obtain details of $DIR_NAME on $DIR_HOST" 1
			EXIT_STATUS=1
			EXISTS=1
			fi
		fi
		if [ x"" == x"$3" ];then
			LOG_MSG "[INFO]:-End Function $FUNCNAME"
		fi
}

GET_MASTER_PORT () {
		LOG_MSG "[INFO]:-Start Function $FUNCNAME"
		MASTER_DATA_DIRECTORY=$1
		if [ x"" == x"$MASTER_DATA_DIRECTORY" ];then
			ERROR_EXIT "[FATAL]:-MASTER_DATA_DIRECTORY variable not set" 2;fi
		if [ ! -d $MASTER_DATA_DIRECTORY ]; then
				ERROR_EXIT "[FATAL]:-No $MASTER_DATA_DIRECTORY directory" 2
		fi
		if [ -r $MASTER_DATA_DIRECTORY/$PG_CONF ];then
			MASTER_PORT=`$AWK 'split($0,a,"#")>0 && split(a[1],b,"=")>1 {print b[1] " " b[2]}' $MASTER_DATA_DIRECTORY/$PG_CONF | $AWK '$1=="port" {print $2}' | $TAIL -1`
			if [ x"" == x"$MASTER_PORT" ] ; then
                #look for include files
                for INC_FILE in `$AWK '/^[ ]*include /{print $2}' $MASTER_DATA_DIRECTORY/$PG_CONF | $TR -d "'\""` ; do
                    if [[ $INC_FILE == /* ]] ; then
                        GET_MASTER_PORT_RECUR "$INC_FILE" 1
                    else
                        GET_MASTER_PORT_RECUR "$MASTER_DATA_DIRECTORY/$INC_FILE" 1
                    fi
                done
                if [ x"" == x"$MASTER_PORT" ] ; then
			        ERROR_EXIT "[FATAL]:-Failed to obtain master port number from $MASTER_DATA_DIRECTORY/$PG_CONF" 2
                fi
			fi
		else
			ERROR_EXIT "[FATAL]:-Do not have read access to $MASTER_DATA_DIRECTORY/$PG_CONF" 2
		fi
		LOG_MSG "[INFO]:-End Function $FUNCNAME"
}

GET_MASTER_PORT_RECUR () {
    INCLUDED_FILE=$1
    RECUR=$2
    if [ $RECUR -le 10 ] ; then
        MASTER_PORT=`$AWK 'split($0,a,"#")>0 && split(a[1],b,"=")>1 {print b[1] " " b[2]}' $INCLUDED_FILE | $AWK '$1=="port" {print $2}' | $TAIL -1`
        if [ x"" == x"$MASTER_PORT" ] ; then
            #look for include files
            let CURR_DEPTH=$RECUR+1
            for INC_FILE in `$AWK '/^[ ]*include /{print $2}' $INC_FILE | $TR -d "'\""` ; do
                if [[ $INC_FILE == /* ]] ; then
                    GET_MASTER_PORT_RECUR "$INC_FILE" $CURR_DEPTH
                else
                    GET_MASTER_PORT_RECUR "$MASTER_DATA_DIRECTORY/$INC_FILE" $CURR_DEPTH
                fi
                if [ x"" != x"$MASTER_PORT" ] ; then
                    break
                fi
            done
        fi
    else
        ERROR_EXIT "[FATAL]:-Could not open configuration file \"$INCLUDED_FILE\": maximum nesting depth exceeded"
    fi
}

GET_CIDRADDR () {
    # MPP-15889
    # assuming argument is an ip address, return the address
    # with a /32 or /128 cidr suffix based on whether or not the
    # address contains a :

    if [ `echo $1 | grep -c :` -gt 0 ]; then
	echo $1/128
    else
	echo $1/32
    fi
}

BUILD_MASTER_PG_HBA_FILE () {
        LOG_MSG "[INFO]:-Start Function $FUNCNAME"
	if [ $# -eq 0 ];then ERROR_EXIT "[FATAL]:-Passed zero parameters, expected at least 1" 2;fi
	GP_DIR=$1
        LOG_MSG "[INFO]:-Clearing values in Master $PG_HBA"
        $GREP "^#" ${GP_DIR}/$PG_HBA > $TMP_PG_HBA
        $MV $TMP_PG_HBA ${GP_DIR}/$PG_HBA
        LOG_MSG "[INFO]:-Setting local access"
        $ECHO "local    all         $USER_NAME         $PG_METHOD" >> ${GP_DIR}/$PG_HBA
        #$ECHO "local    all         all                $PG_METHOD" >> ${GP_DIR}/$PG_HBA
        LOG_MSG "[INFO]:-Setting local host access"
        $ECHO "host     all         $USER_NAME         127.0.0.1/28    trust" >> ${GP_DIR}/$PG_HBA
        for ADDR in "${MASTER_IP_ADDRESS_ALL[@]}"
        do
        	# MPP-15889
        	CIDRADDR=$(GET_CIDRADDR $ADDR)
        	$ECHO "host     all         $USER_NAME         $CIDRADDR       trust" >> ${GP_DIR}/$PG_HBA
        done
        for ADDR in "${STANDBY_IP_ADDRESS_ALL[@]}"
        do
        	# MPP-15889
        	CIDRADDR=$(GET_CIDRADDR $ADDR)
        	$ECHO "host     all         $USER_NAME         $CIDRADDR       trust" >> ${GP_DIR}/$PG_HBA
        done

        # Add all local IPV6 addresses
        for ADDR in "${MASTER_IPV6_LOCAL_ADDRESS_ALL[@]}"
        do
        	# MPP-15889
        	CIDRADDR=$(GET_CIDRADDR $ADDR)
        	$ECHO "host     all         $USER_NAME         $CIDRADDR       trust" >> ${GP_DIR}/$PG_HBA
        done

        # Add replication config
        $ECHO "local    replication $USER_NAME         $PG_METHOD" >> ${GP_DIR}/$PG_HBA
        $ECHO "host     replication $USER_NAME         samenet       trust" >> ${GP_DIR}/$PG_HBA
        LOG_MSG "[INFO]:-Complete Master $PG_HBA configuration"
        LOG_MSG "[INFO]:-End Function $FUNCNAME"
}

BUILD_GPSSH_CONF () {
        LOG_MSG "[INFO]:-Start Function $FUNCNAME"
        if [ $# -eq 0 ];then ERROR_EXIT "[FATAL]:-Passed zero parameters, expected at least 1" 2;fi
        GP_DIR=$1
        $CAT <<_EOF_ >> $GP_DIR/gpssh.conf
[gpssh]
# delaybeforesend specifies the time in seconds to wait at the
# beginning of an ssh interaction before doing anything.
# Increasing this value can have a big runtime impact at the
# beginning of gpssh.
delaybeforesend = 0.05

# prompt_validation_timeout specifies a timeout multiplier that
# will be used in validating the ssh prompt. Increasing this
# value will have a small runtime impact at the beginning of
# gpssh.
prompt_validation_timeout = 1.0
_EOF_
        LOG_MSG "[INFO]:-End Function $FUNCNAME"
}

BUILD_PERFMON() {
	LOG_MSG "[INFO]:-Start Function $FUNCNAME"
	GP_DIR=$1
	$MKDIR -p $GP_DIR/gpperfmon/conf $GP_DIR/gpperfmon/logs $GP_DIR/gpperfmon/data
	$CAT <<_EOF_ >> $GP_DIR/gpperfmon/conf/gpperfmon.conf
[GPMMON]
# quantum specifies the time in seconds between updates from
# performance monitor agents on all segments. Valid values
# are 10, 15, 20, 30, or 60
quantum = 15

# min_query_time specifies the minimum query run time
# in seconds for statistics collection. The monitor logs all
# queries that run longer than this value in the queries_history
# table. For queries with shorter run times, no historical
# data is collected.
min_query_time = 20

# This should be a percentage between 0 and 100 and should be
# less than the error_disk_space_percentage.  If a filesystem’s
# disk space used percentage equals or exceeds this value a
# warning will be logged and a warning email/snmp trap may be
# sent.  If this configuration is set to 0 or not specified, no
# warnings are sent.
#warning_disk_space_percentage = 80

# This should be a percentage between 0 and 100 and should be
# greater than the warning_disk_space_percentage. If a
# filesystem’s disk space used percentage equals or exceeds
# this value an error will be logged and a error email/snmp
# trap may be sent.  If this configuration is set to 0 or not
# specified, no errors are sent.
#error_disk_space_percentage = 90

#This is the interval in minutes that limits the number of
#error/warning messages that are sent. The minimum value for
#this configuration is 1.  Setting this to 0 or not specifying
#this configuration results in it getting set to the minimum.
disk_space_interval = 60

#This is the maximum number of error/warning messages that
#will be sent in the disk_space_interval.  The maximum value
#for this configuration is 50.  The minimum value for this
#configuration is 1.  Setting this configuration to greater
#than 50 or not specifying this configuration results in it
#getting set to the maximum.
max_disk_space_messages_per_interval = 10

# The number of partitions for statistics data in month
# will be retained. Older partitions will be dropped.
#partition_age = 6


log_location = $GP_DIR/gpperfmon/logs
_EOF_
}

CHK_DB_RUNNING () {
		LOG_MSG "[INFO]:-Start Function $FUNCNAME"
		if [ $# -eq 1 ];then
			CHK_DISPATCH_ACCESS=1
		else
			CHK_DISPATCH_ACCESS=0
		fi
		if [ ! -d $MASTER_DATA_DIRECTORY ]; then
				ERROR_EXIT "[FATAL]:-No Master $MASTER_DATA_DIRECTORY directory" 2
		fi
		if [ ! -f $MASTER_DATA_DIRECTORY/$PG_PID ]; then
			LOG_MSG "[FATAL]:-No $MASTER_DATA_DIRECTORY/$PG_PID file" 1
			ERROR_EXIT "[FATAL]:-Run gpstart to start the Greenplum database." 2
		fi
		GET_MASTER_PORT $MASTER_DATA_DIRECTORY
		export $EXPORT_LIB_PATH;env PGOPTIONS="-c gp_session_role=utility" $PSQL -p $MASTER_PORT -d "$DEFAULTDB" -A -t -c"SELECT d.datname as \"Name\",
       r.rolname as \"Owner\",
       pg_catalog.pg_encoding_to_char(d.encoding) as \"Encoding\"
FROM pg_catalog.pg_database d
  JOIN pg_catalog.pg_authid r ON d.datdba = r.oid
ORDER BY 1;" >> $LOG_FILE 2>&1
		if [ $? -ne 0 ];then
			LOG_MSG "[FATAL]:-Have a postmaster.pid file for master instance on port $MASTER_PORT" 1
			LOG_MSG "[FATAL]:-However, error reported on test psql access to master instance" 1
			LOG_MSG "[INFO]:-Check ps output for a postmaster process on the above port" 1
			LOG_MSG "[INFO]:-Check the master postgres logfile for errors and also the utility log file" 1
			ERROR_EXIT "[FATAL]:-Unable to continue" 2
		fi
		if [ $CHK_DISPATCH_ACCESS -eq 1 ];then
			#Check if in admin mode
			export $EXPORT_LIB_PATH;$PSQL -p $MASTER_PORT -d "$DEFAULTDB" -A -t -c"\l" >> $LOG_FILE 2>&1
			if [ $? -ne 0 ];then
				LOG_MSG "[WARN]:-Can access the Master instance in admin mode, but dispatch access failed" 1
				LOG_MSG "[INFO]:-This could mean that the Master instance is in admin mode only" 1
				LOG_MSG "[INFO]:-Run gpstop -m to shutdown Master instance from admin mode, and restart" 1
				LOG_MSG "[INFO]:-the Greenplum database using gpstart" 1
				EXIT_STATUS=1
			else
				EXIT_STATUS=0
			fi
		fi
		LOG_MSG "[INFO]:-End Function $FUNCNAME"
}

GET_QD_DB_NAME () {
		LOG_MSG "[INFO]:-Start Function $FUNCNAME"
		GET_MASTER_PORT $MASTER_DATA_DIRECTORY
		CHK_DB_RUNNING
		#Check if we have PGDATABASE environment variable set, if so see if that database exists
		if [ x"" != x"$PGDATABASE" ];then
			LOG_MSG "[INFO]:-PGDATABASE set, checking for this database"
			QD_DBNAME_THERE=`${EXPORT_LIB_PATH};env PGOPTIONS="-c gp_session_role=utility" $PSQL -p $MASTER_PORT -d "$DEFAULTDB" -A -t -c"select 1 from pg_database where datname='${PGDATABASE}';"|$WC -l`
			ERROR_CHK $? "check for $PGDATABASE" 2
			if [ $QD_DBNAME_THERE -eq 1 ];then
				QD_DBNAME=$PGDATABASE
			else
				QD_DBNAME_THERE=""
			fi
		fi
		if [ x"" = x"$QD_DBNAME_THERE" ];then
			LOG_MSG "[INFO]:-Checking for a non-system database"
			QD_DBNAME=`${EXPORT_LIB_PATH};env PGOPTIONS="-c gp_session_role=utility" $PSQL -p $MASTER_PORT -d "$DEFAULTDB" -A -t -c"$GPLISTDATABASEQTY " 2>/dev/null|$GREP -v postgres|$GREP -v template0|$HEAD -1|$CUT -d"|" -f1`
			ERROR_CHK $? "obtain database name" 2
		fi
		MASTER_DIR_CHK=`${EXPORT_LIB_PATH};env PGOPTIONS="-c gp_session_role=utility" $PSQL -p $MASTER_PORT -d "$DEFAULTDB" -A -t -c"select 1 from ${CONFIG_TABLE} a;"|$WC -l`
		if [ $MASTER_DIR_CHK -eq 0 ];then
			ERROR_EXIT "[FATAL]:-MASTER_DATA_DIRECTORY value of $MASTER_DATA_DIRECTORY is incorrect" 2;fi
		if [ x"" == x"$QD_DBNAME" ]; then
				LOG_MSG "[INFO]:-Unable to obtain a non-system database name, setting value to "$DEFAULTDB""
				QD_DBNAME="$DEFAULTDB"
		fi
		LOG_MSG "[INFO]:-End Function $FUNCNAME"
}

GET_QE_DETAILS () {
		LOG_MSG "[INFO]:-Start Function $FUNCNAME"
		GET_QD_DB_NAME
		if [ x"" == x"$PGUSER" ];then
		    DBUSER=$USER
		else
		    DBUSER=$PGUSER
		fi

		if [ $# -eq 0 ];then
			QE_ARRAY=(`${EXPORT_LIB_PATH};env PGOPTIONS="-c gp_session_role=utility" $PSQL -q -p $MASTER_PORT -U $DBUSER -d "$QD_DBNAME" -A -t -c"select a.hostname, a.datadir, a.port, b.valid, b.definedprimary from $CONFIG_TABLE a, $GP_PG_VIEW b where a.dbid=b.dbid and a.content<>-1 order by b.dbid;"`) > /dev/null 2>&1
		else
			QE_ARRAY=(`${EXPORT_LIB_PATH};env PGOPTIONS="-c gp_session_role=utility" $PSQL -q -p $MASTER_PORT -U $DBUSER -d "$QD_DBNAME" -A -t -c"select a.hostname, a.datadir, a.port, b.valid, b.definedprimary from $CONFIG_TABLE a, $GP_PG_VIEW b where a.dbid=b.dbid and a.content<>-1 order by a.port;"`) > /dev/null 2>&1
		fi
		RETVAL=$?
		if [ $RETVAL -ne 0 ]; then
				LOG_MSG "[WARN]:-Unable to obtain segment instance host details from Master db, error code $RETVAL returned" 1
				EXIT_STATUS=1
		fi
		QE_ARRAY_COUNT=${#QE_ARRAY[@]}
		LOG_MSG "[INFO]:-End Function $FUNCNAME"
}

CHK_MIRRORS_CONFIGURED () {
	LOG_MSG "[INFO]:-Start Function $FUNCNAME"
	MIRROR_COUNT=`${EXPORT_LIB_PATH};env PGOPTIONS="-c gp_session_role=utility" $PSQL -p $MASTER_PORT -d "$DEFAULTDB" -A -t -c"select count(dbid)/count(distinct(content)) from $CONFIG_TABLE a where content<>-1;"`
	ERROR_CHK $? "obtain mirror count from master instance" 2
	LOG_MSG "[INFO]:-Obtained $MIRROR_COUNT as check value"
	LOG_MSG "[INFO]:-End Function $FUNCNAME"
}

GET_PG_PID_ACTIVE () {
		LOG_MSG "[INFO]:-Start Function $FUNCNAME"
		# Expects port number and hostname for remote checking
		PORT=$1;shift
		HOST=$1
		PG_LOCK_FILE="/tmp/.s.PGSQL.${PORT}.lock"
		PG_LOCK_NETSTAT=""
		if [ x"" == x"$HOST" ];then
			#See if we have a netstat entry for this local host
			PORT_ARRAY=(`$NETSTAT -an 2>/dev/null |$GREP ".s.PGSQL.${PORT}"|$AWK '{print $NF}'|$AWK -F"." '{print $NF}'|$SORT -u`)
			for P_CHK in ${PORT_ARRAY[@]}
			do
				if [ $P_CHK -eq $PORT ];then  PG_LOCK_NETSTAT=$PORT;fi
			done
			#PG_LOCK_NETSTAT=`$NETSTAT -an 2>/dev/null |$GREP ".s.PGSQL.${PORT}"|$AWK '{print $NF}'|$HEAD -1`
			#See if we have a lock file in /tmp
			if [ -f ${PG_LOCK_FILE} ];then
				PG_LOCK_TMP=1
			else
				PG_LOCK_TMP=0
			fi
			if [ x"" == x"$PG_LOCK_NETSTAT" ] && [ $PG_LOCK_TMP -eq 0 ];then
				PID=0
				LOG_MSG "[INFO]:-No socket connection or lock file in /tmp found for port=${PORT}"
			else
				#Now check the failure combinations
				if [ $PG_LOCK_TMP -eq 0 ] && [ x"" != x"$PG_LOCK_NETSTAT" ];then
				#Have a process but no lock file
					LOG_MSG "[WARN]:-No lock file $PG_LOCK_FILE but process running on port $PORT" 1
					PID=1
					EXIT_STATUS=1
				fi
				if [ $PG_LOCK_TMP -eq 1 ] && [ x"" == x"$PG_LOCK_NETSTAT" ];then
				#Have a lock file but no process
					if [ -r ${PG_LOCK_FILE} ];then
						PID=`$CAT ${PG_LOCK_FILE}|$HEAD -1|$AWK '{print $1}'`
					else
						LOG_MSG "[WARN]:-Unable to access ${PG_LOCK_FILE}" 1
						PID=1
					fi
					LOG_MSG "[WARN]:-Have lock file $PG_LOCK_FILE but no process running on port $PORT" 1
					EXIT_STATUS=1
				fi
				if [ $PG_LOCK_TMP -eq 1 ] && [ x"" != x"$PG_LOCK_NETSTAT" ];then
				#Have both a lock file and a netstat process
					if [ -r ${PG_LOCK_FILE} ];then
						PID=`$CAT ${PG_LOCK_FILE}|$HEAD -1|$AWK '{print $1}'`
					else
						LOG_MSG "[WARN]:-Unable to access ${PG_LOCK_FILE}" 1
						PID=1
						EXIT_STATUS=1
					fi
					LOG_MSG "[INFO]:-Have lock file $PG_LOCK_FILE and a process running on port $PORT"
				fi
			fi
		else
			PING_HOST $HOST 1
			if [ $RETVAL -ne 0 ];then
				PID=0
				EXIT_STATUS=1
			else
				PORT_ARRAY=(`$TRUSTED_SHELL $HOST "$NETSTAT -an 2>/dev/null |$GREP ".s.PGSQL.${PORT}" 2>/dev/null"|$AWK '{print $NF}'|$AWK -F"." '{print $NF}'|$SORT -u`)
				for P_CHK in ${PORT_ARRAY[@]}
				do
					if [ $P_CHK -eq $PORT ];then  PG_LOCK_NETSTAT=$PORT;fi
				done
				#PG_LOCK_NETSTAT=`$TRUSTED_SHELL $HOST "$NETSTAT -an 2>/dev/null |$GREP ".s.PGSQL.${PORT}" 2>/dev/null"|$AWK '{print $NF}'|$HEAD -1`
				PG_LOCK_TMP=`$TRUSTED_SHELL $HOST "ls ${PG_LOCK_FILE} 2>/dev/null"|$WC -l`
				if [ x"" == x"$PG_LOCK_NETSTAT" ] && [ $PG_LOCK_TMP -eq 0 ];then
					PID=0
					LOG_MSG "[INFO]:-No socket connection or lock file $PG_LOCK_FILE found for port=${PORT}"
				else
				#Now check the failure combinations
					if [ $PG_LOCK_TMP -eq 0 ] && [ x"" != x"$PG_LOCK_NETSTAT" ];then
					#Have a process but no lock file
						LOG_MSG "[WARN]:-No lock file $PG_LOCK_FILE but process running on port $PORT on $HOST" 1
						PID=1
						EXIT_STATUS=1
					fi
					if [ $PG_LOCK_TMP -eq 1 ] && [ x"" == x"$PG_LOCK_NETSTAT" ];then
					#Have a lock file but no process
						CAN_READ=`$TRUSTED_SHELL $HOST "if [ -r ${PG_LOCK_FILE} ];then echo 1;else echo 0;fi"`
						if [ $CAN_READ -eq 1 ];then
							PID=`$TRUSTED_SHELL $HOST "$CAT ${PG_LOCK_FILE}|$HEAD -1 2>/dev/null"|$AWK '{print $1}'`
						else
							LOG_MSG "[WARN]:-Unable to access ${PG_LOCK_FILE} on $HOST" 1
						fi
						LOG_MSG "[WARN]:-Have lock file $PG_LOCK_FILE but no process running on port $PORT on $HOST" 1
						PID=1
						EXIT_STATUS=1
					fi
					if [ $PG_LOCK_TMP -eq 1 ] && [ x"" != x"$PG_LOCK_NETSTAT" ];then
					#Have both a lock file and a netstat process
						CAN_READ=`$TRUSTED_SHELL $HOST "if [ -r ${PG_LOCK_FILE} ];then echo 1;else echo 0;fi"`
						if [ $CAN_READ -eq 1 ];then
							PID=`$TRUSTED_SHELL $HOST "$CAT ${PG_LOCK_FILE}|$HEAD -1 2>/dev/null"|$AWK '{print $1}'`
						else
							LOG_MSG "[WARN]:-Unable to access ${PG_LOCK_FILE} on $HOST" 1
							EXIT_STATUS=1
						fi
						LOG_MSG "[INFO]:-Have lock file $PG_LOCK_FILE and a process running on port $PORT on $HOST"
					fi
				fi
			fi
		fi
		LOG_MSG "[INFO]:-End Function $FUNCNAME"
}

RUN_COMMAND_REMOTE () {
		LOG_MSG "[INFO]:-Start Function $FUNCNAME"
		HOST=$1
		COMMAND=$2
		LOG_MSG "[INFO]:-Commencing remote $TRUSTED_SHELL $HOST $COMMAND"
		$TRUSTED_SHELL $HOST $COMMAND >> $LOG_FILE 2>&1
		RETVAL=$?
		if [ $RETVAL -ne 0 ]; then
			LOG_MSG "[FATAL]:- Command $COMMAND on $HOST failed with error status $RETVAL" 2
		else
			LOG_MSG "[INFO]:-Completed $TRUSTED_SHELL $HOST $COMMAND"
		fi
		LOG_MSG "[INFO]:-End Function $FUNCNAME"
		return $RETVAL
}

BACKOUT_COMMAND () {
		LOG_MSG "[INFO]:-Start Function $FUNCNAME"
		COMMAND=$1
		if [ ! -f $BACKOUT_FILE ]; then
				$ECHO $COMMAND > $BACKOUT_FILE
		else
				$CAT $BACKOUT_FILE > /tmp/backout_file.tmp.$$
				$ECHO $COMMAND > $BACKOUT_FILE
				$CAT /tmp/backout_file.tmp.$$ >> $BACKOUT_FILE
				$RM -f /tmp/backout_file.tmp.$$
		fi
		LOG_MSG "[INFO]:-End Function $FUNCNAME"
}

PING_HOST () {
	LOG_MSG "[INFO]:-Start Function $FUNCNAME"
	TARGET_HOST=$1;shift
	PING_EXIT=$1
	if [ x"" == x"$PING_EXIT" ];then PING_EXIT=0;fi
	case $OS_TYPE in
		darwin )
			$PING $PING_TIME $TARGET_HOST > /dev/null 2>&1 || $PING6 $PING_TIME $TARGET_HOST > /dev/null 2>&1
                        ;;
		linux )
			$PING $TARGET_HOST $PING_TIME > /dev/null 2>&1 || $PING6 $TARGET_HOST $PING_TIME > /dev/null 2>&1
                        ;;
		* )
			$PING $TARGET_HOST $PING_TIME > /dev/null 2>&1
	esac
	RETVAL=$?
	case $RETVAL in
		0) LOG_MSG "[INFO]:-$TARGET_HOST contact established"
                   ;;
		1) if [ $PING_EXIT -eq 0 ];then
			ERROR_EXIT "[FATAL]:-Unable to contact $TARGET_HOST" 2
		   else
		        LOG_MSG "[WARN]:-Unable to contact $TARGET_HOST" 1
		   fi
                   ;;
		2) if [ $PING_EXIT -eq 0 ];then
		 	ERROR_EXIT "[FATAL]:-Unknown host $TARGET_HOST" 2
		   else
			LOG_MSG "[WARN]:-Unknown host $TARGET_HOST" 1
		   fi
                   ;;
	esac
	LOG_MSG "[INFO]:-End Function $FUNCNAME"
	return $RETVAL
}

PARALLEL_SETUP () {
	LOG_MSG "[INFO]:-Start Function $FUNCNAME"
	PARALLEL_STATUS_FILE=$1
	$TOUCH $PARALLEL_STATUS_FILE
	export PARALLEL_STATUS_FILE=$PARALLEL_STATUS_FILE
	LOG_MSG "[INFO]:-Spawning parallel processes    batch [1], please wait..." 1
	BATCH_COUNT=0
	INST_COUNT=0
	BATCH_DONE=1
	BATCH_TOTAL=0
	LOG_MSG "[INFO]:-End Function $FUNCNAME"
}

PARALLEL_COUNT () {
        LOG_MSG "[INFO]:-Start Function $FUNCNAME"
	if [ $# -ne 2 ];then ERROR_EXIT "[FATAL]:-Incorrect number of parameters passed to $FUNCNAME" 2;fi
	BATCH_LIMIT=$1
	BATCH_DEFAULT=$2
	((INST_COUNT=$INST_COUNT+1))
	((BATCH_COUNT=$BATCH_COUNT+1))
	((BATCH_TOTAL=$BATCH_TOTAL+1))
	if [ $BATCH_COUNT -eq $BATCH_DEFAULT ] || [ $BATCH_LIMIT -eq $BATCH_TOTAL ];then
		if [ $DEBUG_LEVEL -eq 0 ] && [ x"" != x"$VERBOSE" ];then $ECHO;fi
		PARALLEL_WAIT
		((BATCH_DONE=$BATCH_DONE+1))
		BATCH_COUNT=0
		if [ $BATCH_LIMIT -ne $BATCH_TOTAL ];then
			LOG_MSG "[INFO]:-Spawning parallel processes    batch [$BATCH_DONE], please wait..." 1
		fi
	fi
        LOG_MSG "[INFO]:-End Function $FUNCNAME"
}

PARALLEL_WAIT () {
	LOG_MSG "[INFO]:-Start Function $FUNCNAME"
	LOG_MSG "[INFO]:-Waiting for parallel processes batch [$BATCH_DONE], please wait..." 1
	SLEEP_COUNT=0
	while [ `$WC -l $PARALLEL_STATUS_FILE|$AWK '{print $1}'` -ne $INST_COUNT ]
	do
		if [ $DEBUG_LEVEL -eq 0 ] && [ x"" != x"$VERBOSE" ];then $NOLINE_ECHO ".\c";fi
		$SLEEP 1
		((SLEEP_COUNT=$SLEEP_COUNT+1))
		if [ $WAIT_LIMIT -lt $SLEEP_COUNT ];then
			if [ $DEBUG_LEVEL -eq 0 ] && [ x"" != x"$VERBOSE" ];then $NOLINE_ECHO ".\c";fi
			LOG_MSG "[FATAL]:-Failed to process this batch of segments within $WAIT_LIMIT seconds" 1
			LOG_MSG "[INFO]:-Review contents of $LOG_FILE" 1
			ERROR_EXIT "[FATAL]:-Process timeout failure" 2
		fi
	done
	if [ $DEBUG_LEVEL -eq 0 ] && [ x"" != x"$VERBOSE" ];then $ECHO;fi
	LOG_MSG "[INFO]:-End Function $FUNCNAME"
}

PARALLEL_SUMMARY_STATUS_REPORT () {
	LOG_MSG "[INFO]:-Start Function $FUNCNAME"
	REPORT_FAIL=0
	if [ -f $1 ];then
	        KILLED_COUNT=`$GREP -c "KILLED:" $PARALLEL_STATUS_FILE`
                COMPLETED_COUNT=`$GREP -c "COMPLETED:" $PARALLEL_STATUS_FILE`
                FAILED_COUNT=`$GREP -c "FAILED:" $PARALLEL_STATUS_FILE`
		((TOTAL_FAILED_COUNT=$KILLED_COUNT+$FAILED_COUNT))
                LOG_MSG "[INFO]:------------------------------------------------" 1
                LOG_MSG "[INFO]:-Parallel process exit status" 1
                LOG_MSG "[INFO]:------------------------------------------------" 1
                LOG_MSG "[INFO]:-Total processes marked as completed           = $COMPLETED_COUNT" 1
                if [ $KILLED_COUNT -ne 0 ];then
                LOG_MSG "[WARN]:-Total processes marked as killed              = $KILLED_COUNT $WARN_MARK" 1
		REPORT_FAIL=1
                else
                LOG_MSG "[INFO]:-Total processes marked as killed              = 0" 1
                fi
                if [ $FAILED_COUNT -ne 0 ];then
                LOG_MSG "[WARN]:-Total processes marked as failed              = $FAILED_COUNT $WARN_MARK" 1
		REPORT_FAIL=1
                else
                LOG_MSG "[INFO]:-Total processes marked as failed              = 0" 1
                fi
                LOG_MSG "[INFO]:------------------------------------------------" 1
	else
		 LOG_MSG "[WARN]:-Could not locate status file $1" 1
		REPORT_FAIL=1
	fi
	LOG_MSG "[INFO]:-End Function $FUNCNAME"
}

CHK_GPDB_ID () {
	LOG_MSG "[INFO]:-Start Function $FUNCNAME"
	if [ -f ${INITDB} ];then
	        PERMISSION=`ls -al ${INITDB}|$AWK '{print $1}'`
		MASTER_INITDB_ID=`ls -al ${INITDB}|$AWK '{print $3}'`
		INIT_CHAR=`$ECHO $MASTER_INITDB_ID|$TR -d '\n'|$WC -c|$TR -d ' '`
		MASTER_INITDB_GROUPID=`ls -al ${INITDB}|$AWK '{print $4}'`
		GROUP_INIT_CHAR=`$ECHO $MASTER_INITDB_ID|$TR -d '\n'|$WC -c|$TR -d ' '`
		GPDB_ID=`id|$TR '(' ' '|$TR ')' ' '|$AWK '{print $2}'`
		GPDB_GROUPID=`id|$TR '(' ' '|$TR ')' ' '|$AWK '{print $4}'`

		USER_EXECUTE=`$ECHO $PERMISSION | $SED -e 's/...\(.\).*/\1/g'`
		GROUP_EXECUTE=`$ECHO $PERMISSION | $SED -e 's/......\(.\).*/\1/g'`

		if [ `$ECHO $GPDB_ID|$TR -d '\n'|$WC -c` -gt $INIT_CHAR ];then
			GPDB_ID_CHK=`$ECHO $GPDB_ID|$CUT -c1-$INIT_CHAR`
		else
			GPDB_ID_CHK=$GPDB_ID
		fi

		if [ `$ECHO $GPDB_GROUPID|$TR -d '\n'|$WC -c` -gt $GROUP_INIT_CHAR ];then
			GPDB_GROUPID_CHK=`$ECHO $GPDB_GROUPID|$CUT -c1-$GROUP_INIT_CHAR`
		else
			GPDB_GROUPID_CHK=$GPDB_GROUPID
		fi

		if [ x$GPDB_ID_CHK == x$MASTER_INITDB_ID ] && [ x"x" == x"$USER_EXECUTE" ];then
		    LOG_MSG "[INFO]:-Current user id of $GPDB_ID, matches initdb id of $MASTER_INITDB_ID"
		elif [ x$GPDB_GROUPID_CHK == x$MASTER_INITDB_GROUPID ] && [ x"x" == x"$GROUP_EXECUTE" ] ; then
		    LOG_MSG "[INFO]:-Current group id of $GPDB_GROUPID, matches initdb group id of $MASTER_INITDB_GROUPID"
		else
			LOG_MSG "[WARN]:-File permission mismatch.  The $GPDB_ID_CHK owns the Greenplum Database installation directory."
			LOG_MSG "[WARN]:-You are currently logged in as $MASTER_INITDB_ID and may not have sufficient"
			LOG_MSG "[WARN]:-permissions to run the Greenplum binaries and management utilities."
		fi

		if [ x"" != x"$USER" ];then
			if [ `$ECHO $USER|$TR -d '\n'|$WC -c` -gt $INIT_CHAR ];then
				USER_CHK=`$ECHO $USER|$CUT -c1-$INIT_CHAR`
			else
				USER_CHK=$USER
			fi
			if [ x$GPDB_ID_CHK != x$USER_CHK ];then
				LOG_MSG "[WARN]:-\$USER mismatch, id returns $GPDB_ID, \$USER returns $USER" 1
				LOG_MSG "[WARN]:-The GPDB superuser account that owns the initdb binary should run these utilities" 1
				LOG_MSG "[WARN]:-This may cause problems when these utilities are run as $USER" 1
			fi
		else
			LOG_MSG "[INFO]:-Environment variable \$USER unset, will set to $GPDB_ID" 1
			export USER=$GPDB_ID
		fi
		if [ x"" != x"$LOGNAME" ];then
			if [ `$ECHO $LOGNAME|$TR -d '\n'|$WC -c` -gt $INIT_CHAR ];then
				LOGNAME_CHK=`$ECHO $LOGNAME|$CUT -c1-$INIT_CHAR`
			else
				LOGNAME_CHK=$LOGNAME
			fi
			if [ x$GPDB_ID_CHK != x$LOGNAME_CHK ];then
				LOG_MSG "[WARN]:-\$LOGNAME mismatch, id returns $GPDB_ID_CHK, \$LOGNAME returns $LOGNAME_CHK" 1
				LOG_MSG "[WARN]:-The GPDB superuser account that owns the initdb binary should run these utilities" 1
				LOG_MSG "[WARN]:-This may cause problems when these utilities are run as $LOGNAME" 1
			fi
		else
			LOG_MSG "[INFO]:-Environment variable \$LOGNAME unset, will set to $GPDB_ID" 1
			export LOGNAME=$GPDB_ID
		fi
	else
		LOG_MSG "[WARN]:-No initdb file, unable to verify id" 1
	fi
	LOG_MSG "[INFO]:-End Function $FUNCNAME"
}

# Make a dbid file at a particular host. The dbid file is used by gpstart
# to tell the process in question which segment/master it is.
# Arguments:
#   1 - DBID
#   2 - host name
#   3 - path to data directory
MAKE_DBID_FILE() {
	DBID=$1; shift
	HOST=$1; shift
	DATADIR=$1; shift

	FILEPATH=$DATADIR/gp_dbid

	if [ "$FILEPATH" = "/gp_dbid" ]; then # DATADIR is empty
		ERROR_EXIT "[FATAL]:-Internal error -- expected non-empty data directory" 2
	fi

	$TRUSTED_SHELL $HOST \
	  "$ECHO \"# Greenplum Database identifier for this master/segment.
# Do not change the contents of this file.
dbid = $DBID\" > $FILEPATH &&  chmod 400 $FILEPATH"
}

UPDATE_MPP () {
	LOG_MSG "[INFO][$INST_COUNT]:-Start Function $FUNCNAME"
	U_DB=$DEFAULTDB
	U_PT=$1
	U_MPPNAME="$2"
	U_NUMSEG=$3
	U_DBID=$4
	U_CONTENT=$5
	TYPE=$6
	U_HOST=$7
	U_DIR=$8
	LOG_MSG "[INFO][$INST_COUNT]:-Making dbid file @ $U_HOST:$U_DIR = $U_DBID"
	MAKE_DBID_FILE $U_DBID $U_HOST $U_DIR
	LOG_MSG "[INFO][$INST_COUNT]:-Successfully updated GPDB system table"
	LOG_MSG "[INFO][$INST_COUNT]:-End Function $FUNCNAME"
}

#******************************************************************************
# Main Section
#******************************************************************************
#******************************************************************************
# Setup logging directory
#******************************************************************************
CUR_DATE=`$DATE +%Y%m%d`
DEFLOGDIR=$HOME/gpAdminLogs
if [ ! -d $DEFLOGDIR ]; then
		mkdir $DEFLOGDIR
fi
LOG_FILE=$DEFLOGDIR/${PROG_NAME}_${CUR_DATE}.log

#Set up OS type for scripts to change command lines
OS_TYPE=`uname -s|tr '[A-Z]' '[a-z]'`
case $OS_TYPE in
	sunos ) IPV4_ADDR_LIST_CMD="$IFCONFIG -a4"
		IPV6_ADDR_LIST_CMD="$IFCONFIG -a6"
		PS_TXT="-ef"
		LIB_TYPE="LD_LIBRARY_PATH"
		ZCAT=gzcat
		# MPP-15890
		PG_METHOD=ident
		HOST_ARCH_TYPE="uname -i"
		NOLINE_ECHO=/usr/bin/echo
		DEFAULT_LOCALE_SETTING=en_US.UTF-8
		MAIL=/bin/mailx
		PING_TIME="1"
		DF=`findCmdInPath df`
		# Multi-byte tr needed on Solaris to handle [:upper:], [:lower:], etc.
		MBTR=/usr/xpg4/bin/tr
		DU_TXT="-s" ;;
	linux ) IPV4_ADDR_LIST_CMD="`findCmdInPath ip` -4 address show"
		IPV6_ADDR_LIST_CMD="`findCmdInPath ip` -6 address show"
		PS_TXT="ax"
		LIB_TYPE="LD_LIBRARY_PATH"
		PG_METHOD="ident"
		HOST_ARCH_TYPE="uname -i"
		NOLINE_ECHO="$ECHO -e"
		DEFAULT_LOCALE_SETTING=en_US.utf8
		PING6=`findCmdInPath ping6`
		PING_TIME="-c 1"
		DF="`findCmdInPath df` -P"
		ID=`whoami`
		DU_TXT="-c" ;;
	darwin ) IPV4_ADDR_LIST_CMD="$IFCONFIG -a inet"
		IPV6_ADDR_LIST_CMD="$IFCONFIG -a inet6"
		PS_TXT="ax"
		LIB_TYPE="DYLD_LIBRARY_PATH"
		# Darwin zcat wants to append ".Z" to the end of the file name; use "gunzip -c" instead
		ZCAT="`findCmdInPath gunzip` -c"
		PG_METHOD="ident"
		HOST_ARCH_TYPE="uname -m"
		NOLINE_ECHO=$ECHO
		DEFAULT_LOCALE_SETTING=en_US.utf-8
        	PING6=`findCmdInPath ping6`
		PING_TIME="-c 1"
		DF="`findCmdInPath df` -P"
		DU_TXT="-c" ;;
	freebsd ) IPV4_ADDR_LIST_CMD="$IFCONFIG -a inet"
		IPV6_ADDR_LIST_CMD="$IFCONFIG -a inet6"
		LIB_TYPE="LD_LIBRARY_PATH"
		PG_METHOD="ident"
		HOST_ARCH_TYPE="uname -m"
		NOLINE_ECHO="$ECHO -e"
		DEFAULT_LOCALE_SETTING=en_US.utf8
		PING_TIME="-c 1"
		DF="`findCmdInPath df` -P"
		DU_TXT="-c" ;;
	* ) echo unknown ;;
esac

GP_LIBRARY_PATH=`$DIRNAME \`$DIRNAME $INITDB\``/lib

##
# we setup some EXPORT foo='blah' commands for when we dispatch to segments and standby master
##
EXPORT_GPHOME='export GPHOME='$GPHOME
if [ x"$LIB_TYPE" == x"LD_LIBRARY_PATH" ]; then
    EXPORT_LIB_PATH="export LD_LIBRARY_PATH=$LD_LIBRARY_PATH"
else
    EXPORT_LIB_PATH="export DYLD_LIBRARY_PATH=$DYLD_LIBRARY_PATH"
fi