_< serialcolumn>_seq, where table and serialcolumn are the
+ names of your table and your SERIAL column, respectively.
Alternatively, you could retrieve the assigned SERIAL value with the
currval() function after it was inserted by default, e.g.,
@@ -667,7 +655,7 @@
transactions as needed and are not locked until the transaction
completes. This causes gaps in numbering from aborted transactions.
- 4.12) What is an OID? What is a TID?
+ 4.12) What is an OID? What is a CTID?
Every row that is created in PostgreSQL gets a unique OID unless
created WITHOUT OIDS. OIDs are autotomatically assigned unique 4-byte
@@ -680,9 +668,9 @@
single table. and are therefore less likely to overflow. SERIAL8 is
available for storing eight-byte sequence values.
- TIDs are used to identify specific physical rows with block and offset
- values. TIDs change after rows are modified or reloaded. They are used
- by index entries to point to physical rows.
+ CTIDs are used to identify specific physical rows with block and
+ offset values. CTIDs change after rows are modified or reloaded. They
+ are used by index entries to point to physical rows.
4.13) Why do I get the error "ERROR: Memory exhausted in AllocSetAlloc()"?
@@ -703,26 +691,12 @@
From psql, type SELECT version();
- 4.15) Why does my large-object operations get "invalid large obj descriptor"?
-
- You need to put BEGIN WORK and COMMIT around any use of a large object
- handle, that is, surrounding lo_open ... lo_close.
-
- Currently PostgreSQL enforces the rule by closing large object handles
- at transaction commit. So the first attempt to do anything with the
- handle will draw invalid large obj descriptor. So code that used to
- work (at least most of the time) will now generate that error message
- if you fail to use a transaction.
-
- If you are using a client interface like ODBC you may need to set
- auto-commit off.
-
- 4.16) How do I create a column that will default to the current time?
+ 4.15) How do I create a column that will default to the current time?
Use CURRENT_TIMESTAMP:
CREATE TABLE test (x int, modtime TIMESTAMP DEFAULT CURRENT_TIMESTAMP );
- 4.17) How do I perform an outer join?
+ 4.16) How do I perform an outer join?
PostgreSQL supports outer joins using the SQL standard syntax. Here
are two examples:
@@ -740,7 +714,7 @@
is assumed in LEFT, RIGHT, and FULL joins. Ordinary joins are called
INNER joins.
- 4.18) How do I perform queries using multiple databases?
+ 4.17) How do I perform queries using multiple databases?
There is no way to query a database other than the current one.
Because PostgreSQL loads database-specific system catalogs, it is
@@ -750,13 +724,13 @@
course, a client can also make simultaneous connections to different
databases and merge the results on the client side.
- 4.19) How do I return multiple rows or columns from a function?
+ 4.18) How do I return multiple rows or columns from a function?
It is easy using set-returning functions,
http://techdocs.postgresql.org/guides/SetReturningFunctions
.
- 4.20) Why do I get "relation with OID ##### does not exist" errors when
+ 4.19) Why do I get "relation with OID ##### does not exist" errors when
accessing temporary tables in PL/PgSQL functions?
PL/PgSQL caches function scripts, and an unfortunate side effect is
@@ -767,7 +741,7 @@
table access in PL/PgSQL. This will cause the query to be reparsed
every time.
- 4.21) What encryption options are available?
+ 4.20) What encryption options are available?
* contrib/pgcrypto contains many encryption functions for use in SQL
queries.
@@ -779,33 +753,4 @@
or ssh, rather than PostgreSQL's native SSL connections.)
* Database user passwords are automatically encrypted when stored in
the system tables.
- * The server can run using an encrypted file system.
- _________________________________________________________________
-
- Extending PostgreSQL
-
- 5.1) I wrote a user-defined function. When I run it in psql, why does it dump
- core?
-
- The problem could be a number of things. Try testing your user-defined
- function in a stand-alone test program first.
-
- 5.2) How can I contribute some nifty new types and functions to PostgreSQL?
-
- Send your extensions to the pgsql-hackers mailing list, and they will
- eventually end up in the contrib/ subdirectory.
-
- 5.3) How do I write a C function to return a tuple?
-
- In versions of PostgreSQL beginning with 7.3, table-returning
- functions are fully supported in C, PL/PgSQL, and SQL. See the
- Programmer's Guide for more information. An example of a
- table-returning function defined in C can be found in
- contrib/tablefunc.
-
- 5.4) I have changed a source file. Why does the recompile not see the change?
-
- The Makefiles do not have the proper dependencies for include files.
- You have to do a make clean and then another make. If you are using
- GCC you can use the --enable-depend option of configure to have the
- compiler compute the dependencies automatically.
+ * The server can also run using an encrypted file system.
diff --git a/doc/src/FAQ/FAQ.html b/doc/src/FAQ/FAQ.html
index 2ea68b4864ab9d8884224fe492963016c00e7753..9572b2bd83a6a0165f6fc442f95f8e64b7aea645 100644
--- a/doc/src/FAQ/FAQ.html
+++ b/doc/src/FAQ/FAQ.html
@@ -10,7 +10,7 @@
alink="#0000ff">
Frequently Asked Questions (FAQ) for PostgreSQL
- Last updated: Sat Apr 23 14:59:01 EDT 2005
+ Last updated: Sat Apr 23 16:49:43 EDT 2005
Current maintainer: Bruce Momjian (pgman@candle.pha.pa.us)
@@ -99,36 +99,24 @@
reused on transaction abort? Why are there gaps in the numbering of
my sequence/SERIAL column?
4.12) What is an OID? What is a
- TID?
- 4.13) Why do I get the error "ERROR: Memory
+ CTID?
+ 4.13) Why do I get the error "ERROR: Memory
exhausted in AllocSetAlloc()"?
4.14) How do I tell what PostgreSQL version I
am running?
- 4.15) Why does my large-object operations get
- "invalid large obj descriptor"?
- 4.16) How do I create a column that will
+ 4.15) How do I create a column that will
default to the current time?
- 4.17) How do I perform an outer join?
- 4.18) How do I perform queries using multiple
+ 4.16) How do I perform an outer join?
+ 4.17) How do I perform queries using multiple
databases?
- 4.19) How do I return multiple rows or columns
+ 4.18) How do I return multiple rows or columns
from a function?
- 4.20) Why do I get "relation with OID #####
+ 4.19) Why do I get "relation with OID #####
does not exist" errors when accessing temporary tables in PL/PgSQL
functions?
- 4.21) What encryption options are available?
+ 4.20) What encryption options are available?
- Extending PostgreSQL
- 5.1) I wrote a user-defined function. When I run
- it in psql, why does it dump core?
- 5.2) How can I contribute some nifty new types
- and functions to PostgreSQL?
- 5.3) How do I write a C function to return a
- tuple?
- 5.4) I have changed a source file. Why does the
- recompile not see the change?
-
General Questions
@@ -683,7 +671,7 @@ table?
unlimited |
If you believe the optimizer is incorrect in choosing a
sequential scan, use SET enable_seqscan TO 'off'
and
- run tests to see if an index scan is indeed faster.
+ run query again to see if an index scan is indeed faster.
When using wild-card operators such as LIKE or
~, indexes can only be used in certain circumstances:
@@ -733,7 +721,6 @@ table?unlimited |
FROM tab
WHERE lower(col) = 'abc';
-
This will not use an standard index. However, if you create a
expresssion index, it will be used:
@@ -745,7 +732,7 @@ table?unlimited |
NULL or not?
You test the column with IS NULL and IS
- NOT NULL.
+ NOT NULL, like this:
SELECT *
@@ -754,7 +741,7 @@ table?unlimited |
To sort by the NULL status, use the IS NULL
- and IS NOT NULL modifiers in your WHERE clause.
+ and IS NOT NULL modifiers in your ORDER BY clause.
Things that are true will sort higher than things that are false,
so the following will put NULL entries at the top of the resulting list:
@@ -787,9 +774,8 @@ length
The first four types above are "varlena" types (i.e., the first
four bytes on disk are the length, followed by the data). Thus the
actual space used is slightly greater than the declared size.
- However, these data types are also subject to compression or being
- stored out-of-line by TOAST, so the space on disk
- might also be less than expected.
+ However, long values are also subject to compression, so the space
+ on disk might also be less than expected.
VARCHAR(n) is best when storing variable-length
strings and it limits how long a string can be. TEXT
@@ -805,8 +791,7 @@ length
serial/auto-incrementing field?
PostgreSQL supports a SERIAL data type. It
- auto-creates a sequence. For example,
- this:
+ auto-creates a sequence. For example, this:
CREATE TABLE person (
id SERIAL,
@@ -815,11 +800,12 @@ length
is automatically translated into this:
+
CREATE SEQUENCE person_id_seq;
CREATE TABLE person (
id INT4 NOT NULL DEFAULT nextval('person_id_seq'),
- name TEXT
+ name TEXT
);
@@ -839,17 +825,17 @@ length
execute("INSERT INTO person (id, name) VALUES (new_id, 'Blaise Pascal')");
- You would then also have the new value stored in
- new_id
for use in other queries (e.g., as a foreign
- key to the person
table). Note that the name of the
- automatically created SEQUENCE object will be named
- <table>_<serialcolumn>_seq, where
- table and serialcolumn are the names of your table
- and your SERIAL column, respectively.
-
- Alternatively, you could retrieve the assigned
- SERIAL value with the currval() function
- after it was inserted by default, e.g.,
+ You would then also have the new value stored in new_id
+ for use in other queries (e.g., as a foreign key to the person
+
table). Note that the name of the automatically created
+ SEQUENCE object will be named <table>_<
+ serialcolumn>_seq, where table and serialcolumn
+ are the names of your table and your SERIAL column,
+ respectively.
+
+ Alternatively, you could retrieve the assigned SERIAL
+ value with the currval() function after it was inserted by
+ default, e.g.,
execute("INSERT INTO person (name) VALUES ('Blaise Pascal')");
new_id = execute("SELECT currval('person_id_seq')");
@@ -871,7 +857,7 @@ length
transactions.
4.12) What is an OID? What is
- a TID?
+ a CTID?
Every row that is created in PostgreSQL gets a unique
OID unless created WITHOUT OIDS.
@@ -888,8 +874,8 @@ length
SERIAL8 is available for storing eight-byte sequence
values.
- TIDs are used to identify specific physical rows
- with block and offset values. TIDs change after rows
+
CTIDs are used to identify specific physical rows
+ with block and offset values. CTIDs change after rows
are modified or reloaded. They are used by index entries to point
to physical rows.
@@ -917,23 +903,7 @@ length
From psql, type SELECT version();
- 4.15) Why does my large-object operations
- get "invalid large obj descriptor"?
-
- You need to put BEGIN WORK
and COMMIT
- around any use of a large object handle, that is, surrounding
- lo_open
... lo_close.
-
- Currently PostgreSQL enforces the rule by closing large object
- handles at transaction commit. So the first attempt to do anything
- with the handle will draw invalid large obj descriptor. So
- code that used to work (at least most of the time) will now
- generate that error message if you fail to use a transaction.
-
- If you are using a client interface like ODBC you
- may need to set auto-commit off.
-
- 4.16) How do I create a column that will
+ 4.15) How do I create a column that will
default to the current time?
Use CURRENT_TIMESTAMP:
@@ -941,7 +911,7 @@ length
CREATE TABLE test (x int, modtime TIMESTAMP DEFAULT CURRENT_TIMESTAMP );
- 4.17) How do I perform an outer join?
+ 4.16) How do I perform an outer join?
PostgreSQL supports outer joins using the SQL standard syntax.
Here are two examples:
@@ -964,7 +934,7 @@ length
RIGHT, and FULL joins. Ordinary joins
are called INNER joins.
- 4.18) How do I perform queries using
+ 4.17) How do I perform queries using
multiple databases?
There is no way to query a database other than the current one.
@@ -976,14 +946,14 @@ length
connections to different databases and merge the results on the
client side.
- 4.19) How do I return multiple rows or
+ 4.18) How do I return multiple rows or
columns from a function?
It is easy using set-returning functions,
http://techdocs.postgresql.org/guides/SetReturningFunctions
.
- 4.20) Why do I get "relation with OID #####
+ 4.19) Why do I get "relation with OID #####
does not exist" errors when accessing temporary tables in PL/PgSQL
functions?
@@ -995,7 +965,7 @@ length
EXECUTE for temporary table access in PL/PgSQL. This
will cause the query to be reparsed every time.
- 4.21) What encryption options are available?
+ 4.20) What encryption options are available?
- contrib/pgcrypto contains many encryption functions for
@@ -1009,42 +979,8 @@ length
native SSL connections.)
- Database user passwords are automatically encrypted when stored in
the system tables.
- - The server can run using an encrypted file system.
+ - The server can also run using an encrypted file system.
-
-
- Extending PostgreSQL
-
- 5.1) I wrote a user-defined function. When I
- run it in psql, why does it dump core?
-
-
The problem could be a number of things. Try testing your
- user-defined function in a stand-alone test program first.
-
- 5.2) How can I contribute some nifty new
- types and functions to PostgreSQL?
-
- Send your extensions to the pgsql-hackers mailing list,
- and they will eventually end up in the contrib/
- subdirectory.
-
- 5.3) How do I write a C function to return a
- tuple?
-
- In versions of PostgreSQL beginning with 7.3, table-returning
- functions are fully supported in C, PL/PgSQL, and SQL. See the
- Programmer's Guide for more information. An example of a
- table-returning function defined in C can be found in
- contrib/tablefunc.
-
- 5.4) I have changed a source file. Why does
- the recompile not see the change?
-
- The Makefiles do not have the proper dependencies for
- include files. You have to do a make clean and then another
- make. If you are using GCC you can use the
- --enable-depend option of configure to have the
- compiler compute the dependencies automatically.