diff --git a/doc/FAQ b/doc/FAQ index f5c12a64654f51fbb60cc2e7e81f50af644d2068..47ad3127db2d495c82a1338ab06fa450503134e4 100644 --- a/doc/FAQ +++ b/doc/FAQ @@ -1,7 +1,7 @@ Frequently Asked Questions (FAQ) for PostgreSQL - Last updated: Fri Jun 4 23:30:19 EDT 1999 + Last updated: Sat Jun 5 14:22:43 EDT 1999 Current maintainer: Bruce Momjian (maillist@candle.pha.pa.us) @@ -13,6 +13,9 @@ Irix-specific questions are answered in http://postgreSQL.org/docs/faq-irix.html. + + HPUX-specific questions are answered in + http://postgreSQL.org/docs/faq-hpux.shtml. _________________________________________________________________ General questions @@ -141,13 +144,13 @@ Section 1: General Questions 1.2) What does PostgreSQL run on? The authors have compiled and tested PostgreSQL on the following - platforms(some of these compiles require gcc 2.7.0): + platforms (some of these compiles require gcc): * aix - IBM on AIX 3.2.5 or 4.x * alpha - DEC Alpha AXP on Digital Unix 2.0, 3.2, 4.0 * BSD44_derived - OSs derived from 4.4-lite BSD (NetBSD, FreeBSD) * bsdi - BSD/OS 2.x, 3.x, 4.x * dgux - DG/UX 5.4R4.11 - * hpux - HP PA-RISC on HP-UX 9.0, 10 + * hpux - HP PA-RISC on HP-UX 9.*, 10.* * i386_solaris - i386 Solaris * irix5 - SGI MIPS on IRIX 5.3 * linux - Intel x86 on Linux 2.0 and Linux ELF SPARC on Linux ELF @@ -203,9 +206,9 @@ Section 1: General Questions California, Berkeley. It is maintained through volunteer effort. The main mailing list is: pgsql-general@postgreSQL.org. It is - available for discussion of matters pertaining to PostgreSQL, For info - on how to subscribe, send a mail with the lines in the body (not the - subject line) + available for discussion of matters pertaining to PostgreSQL. To + subscribe, send a mail with the lines in the body (not the subject + line) subscribe end @@ -221,9 +224,13 @@ Section 1: General Questions Digests are sent out to members of this list whenever the main list has received around 30k of messages. - The bugs mailing list available. To subscribe to this list, send email - to bugs-request@postgreSQL.org with a BODY of: + The bugs mailing list is available. To subscribe to this list, send + email to bugs-request@postgreSQL.org with a BODY of: + + subscribe + end + There is also a developers discussion mailing list available. To subscribe to this list, send email to hackers-request@postgreSQL.org with a BODY of: @@ -237,7 +244,7 @@ Section 1: General Questions http://postgreSQL.org - There also an IRC channel on EFNet, channel #PostgreSQL. I use the + There is also an IRC channel on EFNet, channel #PostgreSQL. I use the unix command irc -c '#PostgreSQL' "$USER" irc.phoenix.net 1.6) Latest release of PostgreSQL @@ -368,8 +375,10 @@ Section 2: Installation Questions 2.4) How do I install PostgreSQL somewhere other than /usr/local/pgsql? - You need to edit Makefile.global and change POSTGRESDIR accordingly, - or create a Makefile.custom and define POSTGRESDIR there. + The simplest way is to specify the --prefix option when running + configure. If you forgot to do that, you can edit Makefile.global and + change POSTGRESDIR accordingly, or create a Makefile.custom and define + POSTGRESDIR there. 2.5) When I run postmaster, I get a Bad System Call core dumped message. @@ -394,13 +403,13 @@ Section 2: Installation Questions 2.8) How do I prevent other hosts from accessing my PostgreSQL database? By default, PostgreSQL only allows connections from the local machine - using unix domain sockets. You must add the -i flag to the postmaster, - and enable host-based authentication by modifying the file - $PGDATA/pg_hba accordingly. + using unix domain sockets. Other machines will not be able to connect + unless you add the -i flag to the postmaster, and enable host-based + authentication by modifying the file $PGDATA/pg_hba.conf accordingly. 2.9) I can't access the database as the root user. - You should not create database users with user id 0(root). They will + You should not create database users with user id 0 (root). They will be unable to access the database. This is a security precaution because of the ability of any user to dynamically link object modules into the database engine. @@ -430,12 +439,15 @@ Section 2: Installation Questions You can also use the postmaster -B option to increase the number of shared memory buffers used by the backend processes. If you make this - parameter too high, the backends will not start or crash unexpectedly. - Each buffer is 8K and the default is 64 buffers. + parameter too high, the postmaster may not start up because you've + exceeded your kernel's limit on shared memory space. Each buffer is 8K + and the default is 64 buffers. - You can also use the postgres -S option to increase the maximum amount - of memory used by each backend process for temporary sorts. Each - buffer is 1K and the default is 512 buffers. + You can also use the backend -S option to increase the maximum amount + of memory used by each backend process for temporary sorts. The -S + value is measured in kilobytes, and the default is 512 (ie, 512K). It + is unwise to make this value too large, or you may run out of memory + when a query invokes several concurrent sorts. You can also use the cluster command to group data in base tables to match an index. See the cluster(l) manual page for more details. @@ -445,7 +457,7 @@ Section 2: Installation Questions PostgreSQL has several features that report status information that can be valuable for debugging purposes. - First, by running configure with the -enable-cassert option, many + First, by running configure with the --enable-cassert option, many assert()'s monitor the progress of the backend and halt the program when something unexpected occurs. @@ -461,7 +473,7 @@ Section 2: Installation Questions encountered by the server. Postmaster has a -d option that allows even more detailed information to be reported. The -d option takes a number that specifies the debug level. Be warned that high debug level values - generates large log files. + generate large log files. You can actually run the postgres backend from the command line, and type your SQL statement directly. This is recommended only for @@ -473,8 +485,8 @@ Section 2: Installation Questions operating system can attach to a running backend directly to diagnose problems. - The postgres program has a -s, -A, -t options that can be very useful - for debugging and performance measurements. + The postgres program has -s, -A, and -t options that can be very + useful for debugging and performance measurements. You can also compile with profiling to see what functions are taking execution time. The backend profile files will be deposited in the @@ -684,21 +696,24 @@ BYTEA bytea variable-length array of bytes you need to use pgdump's -o option or copy with oids option to preserve the oids. - 3.14) What are the pg_psort.XXX files in my database directory? + 3.14) What are the pg_tempNNN.NN files in my database directory? - They are temporary sort files generated by the query executor. For - example, if a sort needs to be done to satisfy an order by, some temp - files are generated as a result of the sort. + They are temporary files generated by the query executor. For example, + if a sort needs to be done to satisfy an order by, and the sort + requires more space than the backend's -S parameter allows, then temp + files are created to hold the extra data. - If you have no transactions or sorts running at the time, it is safe - to delete the pg_psort.XXX files. + The temp files should go away automatically, but might not if a + backend crashes during a sort. If you have no transactions running at + the time, it is safe to delete the pg_tempNNN.NN files. 3.15) Why can't I connect to my database from another machine? The default configuration allows only unix domain socket connections - from the local machine. To enable TCP/IP connections, use the - postmaster -i option You need to add a host entry to the file - pgsql/data/pg_hba. See the pg_hba.conf manual page. + from the local machine. To enable TCP/IP connections, make sure the + postmaster has been started with the -i option, and add an appropriate + host entry to the file pgsql/data/pg_hba.conf. See the pg_hba.conf + manual page. 3.16) How do I find out what indices or operations are defined in the database? @@ -776,7 +791,7 @@ BYTEA bytea variable-length array of bytes See the fetch manual page. - This only prevents all row results from being transfered to the + This only prevents all row results from being transferred to the client. The entire query must be evaluated, even if you only want just the first few rows. Consider a query that has an order by. There is no way to return any rows until the entire query is evaluated and sorted. @@ -811,8 +826,11 @@ being indexed, so they can be large also. 3.23) How do I get a list of tables, or other things I can see in psql? - See the file pgsql/src/bin/psql/psql.c. It contains SQL commands that - generate the output for psql's backslash commands. + You can read the source code for psql, file pgsql/src/bin/psql/psql.c. + It contains SQL commands that generate the output for psql's backslash + commands. Beginning in Postgres 6.5, you can also start psql with the + -E option so that it will print out the queries it uses to execute the + commands you give. 3.24) Why do I get the error "FATAL: palloc failure: memory exhausted?" @@ -826,7 +844,7 @@ being indexed, so they can be large also. Depending on your shell, only one of these may succeed, but it will set your process data segment limit much higher and perhaps allow the query to complete. This command applies to the current process, and - all subprocesses created after the command is run. If are having a + all subprocesses created after the command is run. If you are having a problem with the SQL client because the backend is returning too much data, try it before starting the client. diff --git a/doc/FAQ_HPUX b/doc/FAQ_HPUX index 4789c65e1ddf09e459bab99dbfbba4817e4625c3..369b23b62324dcc059825dbadaad8bb6a49434e0 100644 --- a/doc/FAQ_HPUX +++ b/doc/FAQ_HPUX @@ -1,40 +1,37 @@ - +
======================================================= -Frequently Asked Questions (FAQ) for PostgreSQL V6.4 +Frequently Asked Questions (FAQ) for PostgreSQL V6.5 HP-UX Specific TO BE READ IN CONJUNCTION WITH THE NORMAL FAQ ======================================================= -last updated: Sat Nov 28 16:21:25 EST 1998 +last updated: Sun May 23 19:48:07 EDT 1999 current maintainer: Tom Lane (tgl@sss.pgh.pa.us) original author: Tom Lane (tgl@sss.pgh.pa.us) Questions covered here: -1.1) What do I need to install PostgreSQL on HP-UX? -1.2) Anything special about the build/install procedure? -1.3) yacc dies trying to process src/backend/parser/gram.y. -1.4) Linking the main postgres executable fails, complaining that - there's no "alloca" function. -1.5) OK, it seemed to build and install, but the regression test fails. +1.1) What do I need to install PostgreSQL on HP-UX? +1.2) Anything special about the build/install procedure? +1.3) yacc dies trying to process src/backend/parser/gram.y. +1.4) Linking the main postgres executable fails, complaining that + there's no "alloca" function. +1.5) OK, it seemed to build and install, but the regression test fails. ---------------------------------------------------------------------- Section 1: Installing PostgreSQL ---------------------------------------------------------------------- -1.1) What do I need to install PostgreSQL on HP-UX? +1.1) What do I need to install PostgreSQL on HP-UX? -PostgreSQL 6.4 is known to build and pass regression test on HPUX 9.03, +PostgreSQL 6.5 is known to build and pass regression test on HPUX 9.03, 9.05, and 10.20, given appropriate system patch levels and build tools. It should work on other HPUX 9.* and 10.* releases for Series 700/800 -machines, too. (No one has reported trying it with HPUX 11 yet.) -Since this is a new FAQ, I don't yet have a lot of information about the -exact prerequisites, but I'd appreciate hearing from anyone who fails to -build a working copy, so that we can add more info about exactly what is -needed. +machines, too. I have heard nonspecific reports of problems on HPUX 11; +more info and/or patches would be appreciated! -Aside from PostgreSQL 6.4 or later sources, you will need GNU make +Aside from the PostgreSQL source distribution, you will need GNU make (HP's make will not do), and either GNU gcc or HP's full ANSI C compiler. You must also get flex (GNU lex) 2.5.4 or later --- all versions of HP's lex fail on the Postgres lexer files. @@ -43,9 +40,12 @@ I'd also recommend making sure you are fairly up-to-date on HP patches, particularly if you are using HPUX 9. At a minimum, if you are on HPUX 9, you *must* have PHSS_4630 (libm update) or a successor patch; otherwise Postgres' date/time functions will misbehave. On general principles you -should be current on libc and ld/dld patches, as well as compiler -patches if you are using HP's C compiler (but I don't currently know of -any specific failures due to not having recent patches for these files). +should be current on libc and ld/dld patches, as well as compiler patches +if you are using HP's C compiler. (The only other presently known failure +from out-of-date system libraries is that on HPUX 10.10, the backend will +crash after the second error message in a session unless you have upgraded +libc to PHCO_16722 or later.) + See HP's support websites, such as http://us-support.external.hp.com/, for free copies of their latest patches. @@ -54,22 +54,23 @@ install on HPUX, so I recommend you not bother with anything older than 6.4. -1.2) Anything special about the build/install procedure? +1.2) Anything special about the build/install procedure? When you run configure, you will want to explicitly select either the hpux_cc or hpux_gcc template depending on which compiler you plan to use: - ./configure --with-template=hpux_cc + ./configure --with-template=hpux_cc for HP's C compiler, or - ./configure --with-template=hpux_gcc + ./configure --with-template=hpux_gcc for GNU gcc. (If you omit --with-template, configure may either default to hpux_cc or give up entirely, depending on which HPUX and PostgreSQL releases you have.) You may want to tweak the CFLAGS setting in template/hpux_[g]cc before -you configure; the distributed files contain neither -O nor -g switches, -which is hardly optimal for any situation. I've seen no problems using --O with gcc 2.7.2.*. +you configure. The distributed copy of hpux_cc contains neither -O nor -g +switches, which is hardly optimal for any situation. As of Postgres 6.5, +hpux_gcc sets CFLAGS to -O2, which is fine unless you want to do debugging; +in that case you may want -g as well (or instead). The default install target location is /usr/local/pgsql, which (particularly on HPUX 10) you might want to change to something under @@ -87,7 +88,7 @@ Otherwise the standard build/install procedure described in the PostgreSQL documentation works fine. -1.3) yacc dies trying to process src/backend/parser/gram.y. +1.3) yacc dies trying to process src/backend/parser/gram.y. HP's yacc doesn't create its tables large enough to handle the Postgres grammar (a lot of other vendors' yaccs have this problem too). There @@ -98,33 +99,37 @@ and src/backend/parser/parse.h and repeat the build. Any PostgreSQL distribution file should have up-to-date copies of those files included, so you shouldn't need to run yacc on gram.y at all ... but sometimes gram.y mistakenly has a newer timestamp in the distribution than the -derived files do. - -2. Install "bison" (GNU yacc) and reconfigure. Bison doesn't have a -problem with large grammars. Note this is not the right choice if you -are using HP's cc on HPUX 9 --- see next item. +derived files do. (If you fetched the PostgreSQL sources from the CVS +server, then you won't have these files anyway; see next choices.) -3. Increase yacc's table sizes enough to cope. With a pre-6.4 +2. Increase yacc's table sizes enough to cope. With a pre-6.4 PostgreSQL grammar, I was able to get HPUX 9's yacc to work by setting YFLAGS to - -d -Np2000 -Ns3000 -Nm100000 -Nl2000 -Na30000 -Nc10000 + -d -Np2000 -Ns3000 -Nm100000 -Nl2000 -Na30000 -Nc10000 (You can edit YFLAGS either in the template file before running configure, or in src/Makefile.global afterwards.) Future PostgreSQL releases might require even larger tables, but this should do for a starting point. +3. Install "bison" (GNU yacc) and reconfigure. Bison doesn't have a +problem with large grammars. Note this is not the right choice if you +are using HP's cc on HPUX 9 --- see next item. + -1.4) Linking the main postgres executable fails, complaining that - there's no "alloca" function. +1.4) Linking the main postgres executable fails, complaining that + there's no "alloca" function. -If you're using HP's cc on HPUX 9, it's right: there's no alloca -function. The only place in PostgreSQL that uses alloca is the parser -(gram.c), and that does so only if it was generated with GNU bison. -Unfortunately the distribution copy of gram.c is made with bison. -There are several possible answers: +If you're using HP's cc on HPUX 9, it's right: there's no alloca function. +The only places in PostgreSQL that use alloca are the parser files, and +those do so only if they were generated with GNU bison. Unfortunately the +prebuilt copies of gram.c and preproc.c are made with bison. There are +several possible answers: - 1. Remake gram.c with HP's yacc (see above item for switch settings). - You might also need to remake src/backend/bootstrap/bootparse.c. + 1. Remake the files with HP's yacc: configure to use yacc with the + above-mentioned switch settings, and remove these files before + starting the build: + src/backend/parser/gram.c + src/interfaces/ecpg/preproc/preproc.c 2. Build with gcc, which treats alloca as a compiled-in-line function. @@ -132,7 +137,7 @@ There are several possible answers: before Y2K anyway... -1.5) OK, it seemed to build and install, but the regression test fails. +1.5) OK, it seemed to build and install, but the regression test fails. There are several "expected failures" due to differences between HPUX and the regression test reference platform used by the PostgreSQL group. @@ -140,32 +145,31 @@ A look at the textual differences between the expected and actual outputs will usually reveal that the differences are minor. You should expect these differences: -TEST(S) COMMENTS +TEST(S) COMMENTS -int2, int4: pg_atoi generates a differently worded error - message for integer overflow. +int2, int4: pg_atoi generates a differently worded error + message for integer overflow. -float8: In 6.4, float8 shows some differences due to - different handling of overflow/underflow errors in - exp() and pow(). This should be fixed in 6.4.1 - and later. +float8, geometry: Lots of differences in the last digit or two + because of different roundoff errors in floating + arithmetic. Also, HPUX does not distinguish + -0 from 0 during printout, but the reference + platform does. -float8, geometry: Lots of differences in the last digit or two - because of different roundoff errors in floating - arithmetic. Also, HPUX does not distinguish - -0 from 0 during printout, but the reference - platform does. +float8: In 6.4, float8 shows some differences due to + different handling of overflow/underflow errors in + exp() and pow(). This is fixed in 6.4.1 and later. -horology: HPUX time library does not know about daylight - savings time before 1970, so there are some - places in horology where a time will be shown - in PST instead of PDT. +horology: HPUX time library does not know about daylight + savings time before 1970, so there are some + places in horology where a time will be shown + in PST instead of PDT. -In addition, the int8 regression test will fail massively on HPUX 9, -because int8 doesn't actually work on this platform (sprintf/sscanf -don't cope with long long int). Either upgrade to HPUX 10, or don't -use int8 data. +The int8 regression test will fail massively on HPUX 9 with Postgres 6.4, +because sprintf/sscanf don't cope with long long int. This is fixed in +Postgres 6.5 by not depending on the system versions of those routines. Any other error is cause for suspicion. In particular, if you see failures in the datetime test on HPUX 9, you probably forgot to install the libm patch PHSS_4630 --- see item 1.1 above. +