Add RTC device

bsp/cypress/libraries/HAL_Drivers/SConscript

@@ -38,6 +38,9 @@ if GetDepend(['BSP_USING_SPI']):
 if GetDepend(['BSP_USING_ADC']):
     src += ['drv_adc.c']
 
+if GetDepend('BSP_USING_RTC'):
+    src += ['drv_rtc.c']
+
 if GetDepend(['RT_USING_WDT']):
     src += ['drv_wdt.c']
 

bsp/cypress/libraries/HAL_Drivers/drv_rtc.c

+/*
+ * Copyright (c) 2006-2022, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date         Author         Notes
+ * 2022-07-25   Rbb666         first version
+ */
+
+#include <rtthread.h>
+#include <rtdevice.h>
+#include <sys/time.h>
+#include "drv_common.h"
+
+#ifdef BSP_USING_RTC
+
+//#define DRV_DEBUG
+#define LOG_TAG                         "drv.rtc"
+#include <drv_log.h>
+
+cyhal_rtc_t rtc_obj;
+
+static rt_rtc_dev_t ifx32_rtc_dev;
+
+static int get_day_of_week(int day, int month, int year)
+{
+    int ret;
+    int k = 0;
+    int j = 0;
+    if (month < CY_RTC_MARCH)
+    {
+        month += CY_RTC_MONTHS_PER_YEAR;
+        year--;
+    }
+
+    k = (year % 100);
+    j = (year / 100);
+    ret = (day + (13 * (month + 1) / 5) + k + (k / 4) + (j / 4) + (5 * j)) % 7;
+    ret = ((ret + 6) % 7);
+
+    return ret;
+}
+
+static rt_err_t set_rtc_time_stamp(time_t time_stamp)
+{
+    struct tm tm = {0};
+    struct tm new_time = {0};
+
+    gmtime_r(&time_stamp, &tm);
+    if (tm.tm_year < 100)
+    {
+        return -RT_ERROR;
+    }
+
+    new_time.tm_sec     = tm.tm_sec ;
+    new_time.tm_min     = tm.tm_min ;
+    new_time.tm_hour    = tm.tm_hour;
+    new_time.tm_mday    = tm.tm_mday;
+    new_time.tm_mon     = tm.tm_mon;
+    new_time.tm_year    = tm.tm_year;
+    new_time.tm_wday    = get_day_of_week(tm.tm_mday, tm.tm_mon, tm.tm_year);
+
+    if (cyhal_rtc_write(&rtc_obj, &new_time) != RT_EOK)
+    {
+        return -RT_ERROR;
+    }
+
+    LOG_D("set rtc time.");
+
+    return RT_EOK;
+}
+
+static rt_err_t ifx_rtc_get_timeval(struct timeval *tv)
+{
+    struct tm tm_new = {0};
+    struct tm date_time = {0};
+
+    cyhal_rtc_read(&rtc_obj, &date_time);
+
+    tm_new.tm_sec  = date_time.tm_sec;
+    tm_new.tm_min  = date_time.tm_min;
+    tm_new.tm_hour = date_time.tm_hour;
+    tm_new.tm_mday = date_time.tm_mday;
+    tm_new.tm_mon  = date_time.tm_mon;
+    tm_new.tm_year = date_time.tm_year;
+
+    tv->tv_sec = timegm(&tm_new);
+
+    return RT_EOK;
+}
+
+static rt_err_t _rtc_init(void)
+{
+    if (cyhal_rtc_init(&rtc_obj) != RT_EOK)
+    {
+        LOG_E("rtc init failed.");
+        return -RT_ERROR;
+    }
+
+    return RT_EOK;
+}
+
+static rt_err_t _rtc_get_secs(time_t *sec)
+{
+    struct timeval tv;
+
+    ifx_rtc_get_timeval(&tv);
+    *(time_t *) sec = tv.tv_sec;
+    LOG_D("RTC: get rtc_time %d", *sec);
+
+    return RT_EOK;
+}
+
+static rt_err_t _rtc_set_secs(time_t *sec)
+{
+    rt_err_t result = RT_EOK;
+
+    if (set_rtc_time_stamp(*sec))
+    {
+        result = -RT_ERROR;
+    }
+    LOG_D("RTC: set rtc_time %d", *sec);
+
+    return result;
+}
+
+static const struct rt_rtc_ops _rtc_ops =
+{
+    _rtc_init,
+    _rtc_get_secs,
+    _rtc_set_secs,
+    RT_NULL,
+    RT_NULL,
+    ifx_rtc_get_timeval,
+    RT_NULL,
+};
+
+/**
+ * @brief    RTC initialization function.
+ *
+ * @return   RT_EOK indicates successful initialization, other value indicates failed;
+ */
+static int rt_hw_rtc_init(void)
+{
+    rt_err_t result = RT_EOK;
+
+    ifx32_rtc_dev.ops = &_rtc_ops;
+
+    if (rt_hw_rtc_register(&ifx32_rtc_dev, "rtc", RT_DEVICE_FLAG_RDWR, RT_NULL) != RT_EOK)
+    {
+        LOG_E("rtc init failed");
+        result = RT_ERROR;
+    }
+    else
+    {
+        LOG_D("rtc init success");
+    }
+
+    return result;
+}
+
+INIT_DEVICE_EXPORT(rt_hw_rtc_init);
+#endif

bsp/cypress/libraries/HAL_Drivers/drv_uart.c

@@ -67,7 +67,6 @@ static void uart_isr(struct rt_serial_device *serial)
     struct ifx_uart *uart = (struct ifx_uart *) serial->parent.user_data;
     RT_ASSERT(uart != RT_NULL);
 
-#ifdef BSP_USING_UART5
     if ((uart->config->usart_x->INTR_RX_MASKED & SCB_INTR_RX_MASKED_NOT_EMPTY_Msk) != 0)
     {
         /* Clear UART "RX fifo not empty interrupt" */
@@ -75,7 +74,6 @@ static void uart_isr(struct rt_serial_device *serial)
 
         rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_IND);
     }
-#endif
 }
 
 #ifdef BSP_USING_UART0
@@ -162,16 +160,28 @@ void uart5_isr_callback(void)
  */
 static rt_err_t ifx_configure(struct rt_serial_device *serial, struct serial_configure *cfg)
 {
-    struct ifx_uart *uart = (struct ifx_uart *) serial->parent.user_data;
-
     RT_ASSERT(serial != RT_NULL);
+    struct ifx_uart *uart = (struct ifx_uart *) serial->parent.user_data;
     RT_ASSERT(uart != RT_NULL);
 
     cy_en_scb_uart_status_t result;
 
+    const cyhal_uart_cfg_t uart_config =
+    {
+        .data_bits          = 8,
+        .stop_bits          = 1,
+        .parity             = CYHAL_UART_PARITY_NONE,
+        .rx_buffer          = NULL,
+        .rx_buffer_size     = 0
+    };
+
     /* Initialize retarget-io to use the debug UART port */
-    result = cy_retarget_io_init(uart->config->tx_pin, uart->config->rx_pin,
-                                 CY_RETARGET_IO_BAUDRATE);
+    result = cyhal_uart_init(uart->config->uart_obj, uart->config->tx_pin, uart->config->rx_pin, NC, NC, NULL, &uart_config);
+
+    if (result == CY_RSLT_SUCCESS)
+    {
+        result = cyhal_uart_set_baud(uart->config->uart_obj, cfg->baud_rate, NULL);
+    }
 
     RT_ASSERT(result != RT_ERROR);
 
@@ -229,10 +239,13 @@ static int ifx_uarths_getc(struct rt_serial_device *serial)
 {
     int ch;
     rt_uint8_t read_data;
+
     RT_ASSERT(serial != RT_NULL);
+    struct ifx_uart *uart = (struct ifx_uart *) serial->parent.user_data;
+    RT_ASSERT(uart != RT_NULL);
 
     ch = -1;
-    if (RT_EOK == cyhal_uart_getc(&cy_retarget_io_uart_obj, (uint8_t *)&read_data, 1))
+    if (RT_EOK == cyhal_uart_getc(uart->config->uart_obj, (uint8_t *)&read_data, 1))
     {
         ch = read_data & 0xff;
     }
@@ -258,15 +271,17 @@ void rt_hw_uart_init(void)
     int index;
 
     rt_size_t obj_num = sizeof(uart_obj) / sizeof(struct ifx_uart);
-    struct serial_configure config = RT_SERIAL_CONFIG_DEFAULT;
+    struct serial_configure serial_config = RT_SERIAL_CONFIG_DEFAULT;
     rt_err_t result = 0;
 
     for (index = 0; index < obj_num; index++)
     {
         uart_obj[index].config = &uart_config[index];
         uart_obj[index].serial.ops = &_uart_ops;
-        uart_obj[index].serial.config = config;
+        uart_obj[index].serial.config = serial_config;
 
+        uart_obj[index].config->uart_obj = rt_malloc(sizeof(cyhal_uart_t));
+        RT_ASSERT(uart_obj[index].config->uart_obj != RT_NULL);
         /* register uart device */
         result = rt_hw_serial_register(&uart_obj[index].serial,
                                        uart_obj[index].config->name,

bsp/cypress/libraries/HAL_Drivers/drv_uart.h

@@ -21,6 +21,8 @@
 
 struct ifx_uart_config
 {
+    cyhal_uart_t *uart_obj;
+
     const char *name;
     rt_uint32_t tx_pin;
     rt_uint32_t rx_pin;

bsp/cypress/libraries/IFX_PSOC6_HAL/SConscript

@@ -95,6 +95,10 @@ if GetDepend(['RT_USING_SPI']):
 if GetDepend(['RT_USING_I2C']):
     src += ['mtb-hal-cat1/source/cyhal_i2c.c']
 
+if GetDepend('BSP_USING_RTC'):
+    src += ['mtb-pdl-cat1/drivers/source/cy_rtc.c']
+    src += ['mtb-hal-cat1/source/cyhal_rtc.c']
+
 if GetDepend(['RT_USING_WDT']):
     src += ['mtb-pdl-cat1/drivers/source/cy_wdt.c']
     src += ['mtb-hal-cat1/source/cyhal_wdt.c']

bsp/cypress/libraries/IFX_PSOC6_HAL/mtb-hal-cat1/include/cyhal_rtc.h

@@ -9,9 +9,7 @@
 *
 ********************************************************************************
 * \copyright
-* Copyright 2018-2021 Cypress Semiconductor Corporation (an Infineon company) or
-* an affiliate of Cypress Semiconductor Corporation
-*
+* Copyright 2018-2021 Cypress Semiconductor Corporation
 * SPDX-License-Identifier: Apache-2.0
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
@@ -72,6 +70,12 @@
 extern "C" {
 #endif
 
+/** \cond INTERNAL */
+/** Generate a result code specific to the HAL driver */
+#define CYHAL_RSLT_CREATE(type, driver, code)           \
+    (CY_RSLT_CREATE(type, CY_RSLT_MODULE_ABSTRACTION_HAL, ((uint16_t)driver | (uint16_t)code)))
+/** \endcond */
+
 /** \addtogroup group_hal_results_rtc RTC HAL Results
  *  RTC specific return codes
  *  \ingroup group_hal_results
@@ -80,10 +84,10 @@ extern "C" {
 
 /** RTC not initialized */
 #define CY_RSLT_RTC_NOT_INITIALIZED                     \
-    (CY_RSLT_CREATE_EX(CY_RSLT_TYPE_ERROR, CY_RSLT_MODULE_ABSTRACTION_HAL, CYHAL_RSLT_MODULE_RTC, 0))
+    (CYHAL_RSLT_CREATE(CY_RSLT_TYPE_ERROR, CYHAL_RSLT_MODULE_RTC, 0))
 /** Bad argument */
 #define CY_RSLT_RTC_BAD_ARGUMENT                        \
-    (CY_RSLT_CREATE_EX(CY_RSLT_TYPE_ERROR, CY_RSLT_MODULE_ABSTRACTION_HAL, CYHAL_RSLT_MODULE_RTC, 1))
+    (CYHAL_RSLT_CREATE(CY_RSLT_TYPE_ERROR, CYHAL_RSLT_MODULE_RTC, 1))
 
 /**
  * \}
@@ -145,23 +149,6 @@ typedef struct
 typedef void (*cyhal_rtc_event_callback_t)(void *callback_arg, cyhal_rtc_event_t event);
 
 /** Initialize the RTC peripheral
- *
- * Power up the RTC in preparation for access. This function must be called
- * before any other RTC functions are called. This does not change the state
- * of the RTC. It just enables access to it.
- * @note Before calling this, make sure all necessary System Clocks are setup
- * correctly. Generally this means making sure the RTC has access to a crystal
- * oscillator for optimal accuracy and operation in low power.
- * @note Previously set time configurations are retained. This will only reset
- * the time if no prior configuration can be determined.
- *
- * @param[out] obj  Pointer to an RTC object. The caller must allocate the memory
- *  for this object but the init function will initialize its contents.
- * @return The status of the init request
- */
-cy_rslt_t cyhal_rtc_init(cyhal_rtc_t *obj);
-
-/** Initialize the RTC peripheral using a configurator generated configuration struct
  *
  * Power up the RTC in preparation for access. This function must be called
  * before any other RTC functions are called. This does not change the state
@@ -174,10 +161,9 @@ cy_rslt_t cyhal_rtc_init(cyhal_rtc_t *obj);
  *
  * @param[out] obj  Pointer to an RTC object. The caller must allocate the memory
  *  for this object but the init function will initialize its contents.
- * @param[in] cfg   Configuration structure generated by a configurator.
  * @return The status of the init request
  */
-cy_rslt_t cyhal_rtc_init_cfg(cyhal_rtc_t *obj, const cyhal_rtc_configurator_t *cfg);
+cy_rslt_t cyhal_rtc_init(cyhal_rtc_t *obj);
 
 /** Deinitialize RTC
  *
@@ -213,25 +199,7 @@ cy_rslt_t cyhal_rtc_read(cyhal_rtc_t *obj, struct tm *time);
  */
 cy_rslt_t cyhal_rtc_write(cyhal_rtc_t *obj, const struct tm *time);
 
-/** Write the specified time and date values to the RTC peripheral
-  * @param[in] obj   RTC object
-  * @param[in] sec   Second to set (0-59)
-  * @param[in] min   Minute to set (0-59)
-  * @param[in] hour  Hour to set (0-23)
-  * @param[in] day   Day of month to set (1-31)
-  * @param[in] month Month to set (1-12)
-  * @param[in] year  4-digit year to set
-  * @return The status of the write request
-  */
-cy_rslt_t cyhal_rtc_write_direct(cyhal_rtc_t *obj, uint32_t sec, uint32_t min, uint32_t hour,
-                                 uint32_t day, uint32_t month, uint32_t year);
-
 /** Set the start and end time for Day Light Savings
- *
- * Calling this function will allow alarms to account for daylight saving time.
- * This means that the RTC will be adjusted when a daylight saving time
- * transition occurs, meaning times passed to \ref cyhal_rtc_set_alarm()
- * will be interpreted as being in DST/not in DST as appropriate.
  *
  * @param[in] obj  RTC object
  * @param[in] start When Day Light Savings time should start

bsp/cypress/libraries/IFX_PSOC6_HAL/mtb-hal-cat1/source/cyhal_rtc.c

@@ -2,16 +2,14 @@
 * \file cyhal_rtc.c
 *
 * \brief
-* Provides a high level interface for interacting with the Infineon Real-Time Clock.
+* Provides a high level interface for interacting with the Cypress Real-Time Clock.
 * This interface abstracts out the chip specific details. If any chip specific
 * functionality is necessary, or performance is critical the low level functions
 * can be used directly.
 *
 ********************************************************************************
 * \copyright
-* Copyright 2018-2021 Cypress Semiconductor Corporation (an Infineon company) or
-* an affiliate of Cypress Semiconductor Corporation
-*
+* Copyright 2018-2021 Cypress Semiconductor Corporation
 * SPDX-License-Identifier: Apache-2.0
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
@@ -31,15 +29,13 @@
 #include "cy_utils.h"
 #include "cyhal_rtc.h"
 #include "cyhal_system.h"
-#include "cyhal_utils_psoc.h"
-#include "cyhal_irq_psoc.h"
 
 /**
 * \addtogroup group_hal_impl_rtc RTC (Real Time Clock)
 * \ingroup group_hal_impl
 * \{
 *
-* Internally the CAT1 (PSoCâ„¢ 6) RTC only stores the year as a two digit BCD value
+* Internally the CAT1 (PSoC 6) RTC only stores the year as a two digit BCD value
 * (0-99); no century information is stored. On RTC initialization the HAL must,
 * as a result, assume a default century. If cyhal_rtc_write has been called
 * with a different century than the default, its value must be stored and that
@@ -60,7 +56,7 @@
 * \} group_hal_impl_wdt
 */
 
-#if (CYHAL_DRIVER_AVAILABLE_RTC)
+#if (defined(CY_IP_MXS40SSRSS) || defined(CY_IP_MXS40SRSS)) && SRSS_BACKUP_PRESENT
 
 #if defined(__cplusplus)
 extern "C" {
@@ -69,66 +65,22 @@ extern "C" {
 #define _CYHAL_RTC_STATE_UNINITIALIZED 0
 #define _CYHAL_RTC_STATE_ENABLED 1
 #define _CYHAL_RTC_STATE_TIME_SET 2
-#if (defined(COMPONENT_CAT1C) && (CORE == CM0P))
-// To account for the lower __NVIC_PRIO_BITS value
-#define _CYHAL_RTC_DEFAULT_PRIORITY 3
-#else
 #define _CYHAL_RTC_DEFAULT_PRIORITY 5
-#endif // (defined(COMPONENT_CAT1C) && (CORE == CM0P))
 #define _CYHAL_RTC_INIT_CENTURY 2000
 #define _CYHAL_RTC_TM_YEAR_BASE 1900
 
-#if defined(COMPONENT_CAT1A) || defined (COMPONENT_CAT1C)
 #define _CYHAL_RTC_BREG (BACKUP->BREG[SRSS_BACKUP_NUM_BREG-1])
-#elif defined(COMPONENT_CAT1B)
-#if defined(SRSS_BACKUP_NUM_BREG3) && (SRSS_BACKUP_NUM_BREG3 > 0)
-#define _CYHAL_RTC_BREG (BACKUP->BREG_SET3[SRSS_BACKUP_NUM_BREG3-1])
-#elif defined(SRSS_BACKUP_NUM_BREG2) && (SRSS_BACKUP_NUM_BREG2 > 0)
-#define _CYHAL_RTC_BREG (BACKUP->BREG_SET2[SRSS_BACKUP_NUM_BREG2-1])
-#elif defined(SRSS_BACKUP_NUM_BREG1) && (SRSS_BACKUP_NUM_BREG1 > 0)
-#define _CYHAL_RTC_BREG (BACKUP->BREG_SET1[SRSS_BACKUP_NUM_BREG1-1])
-#elif defined(SRSS_BACKUP_NUM_BREG0) && (SRSS_BACKUP_NUM_BREG0 > 0)
-#define _CYHAL_RTC_BREG (BACKUP->BREG_SET0[SRSS_BACKUP_NUM_BREG0-1])
-#endif
-#endif /* defined(COMPONENT_CAT1B) */
-
 #define _CYHAL_RTC_BREG_CENTURY_Pos 0UL
 #define _CYHAL_RTC_BREG_CENTURY_Msk 0x0000FFFFUL
 #define _CYHAL_RTC_BREG_STATE_Pos 16UL
 #define _CYHAL_RTC_BREG_STATE_Msk 0xFFFF0000UL
 
-static const uint32_t _CYHAL_RTC_MAX_RETRY = 10;
-static const uint32_t _CYHAL_RTC_RETRY_DELAY_MS = 1;
-
-// Note: Use PDL directly rather than HAL. RTOS-aware delay is not needed and actually breaks functionality.
-#define _CYHAL_RTC_WAIT_ONE_MS()   Cy_SysLib_Delay(_CYHAL_RTC_RETRY_DELAY_MS);
-
-static void _cyhal_rtc_from_pdl_time(cy_stc_rtc_config_t *pdlTime, const int year, struct tm *time) {
-    CY_ASSERT(NULL != pdlTime);
-    CY_ASSERT(NULL != time);
-
-    // The number of days that precede each month of the year, not including Feb 29
-    static const uint16_t CUMULATIVE_DAYS[] = {0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334};
-
-    time->tm_sec = (int)pdlTime->sec;
-    time->tm_min = (int)pdlTime->min;
-    time->tm_hour = (int)pdlTime->hour;
-    time->tm_mday = (int)pdlTime->date;
-    time->tm_mon = (int)(pdlTime->month - 1u);
-    time->tm_year = (int)(year - _CYHAL_RTC_TM_YEAR_BASE);
-    time->tm_wday = (int)(pdlTime->dayOfWeek - 1u);
-    time->tm_yday = (int)CUMULATIVE_DAYS[time->tm_mon] + (int)pdlTime->date - 1 +
-        (((int)(pdlTime->month) >= 3 && (int)(Cy_RTC_IsLeapYear((uint32_t)year) ? 1u : 0u)));
-    time->tm_isdst = -1;
-}
-
 /** Wrapper around the PDL Cy_RTC_DeepSleepCallback to adapt the function signature */
 static cy_en_syspm_status_t _cyhal_rtc_syspm_callback(cy_stc_syspm_callback_params_t *params, cy_en_syspm_callback_mode_t mode)
 {
     return Cy_RTC_DeepSleepCallback(params, mode);
 }
 
-static bool _cyhal_rtc_dst_skip_next_alarm = false;
 static cy_stc_rtc_dst_t *_cyhal_rtc_dst;
 static cy_stc_syspm_callback_params_t _cyhal_rtc_pm_cb_params = {NULL, NULL};
 static cy_stc_syspm_callback_t _cyhal_rtc_pm_cb = {
@@ -185,11 +137,7 @@ static void _cyhal_rtc_isr_handler(void)
 /* Override weak function from PDL */
 void Cy_RTC_Alarm1Interrupt(void)
 {
-    if (_cyhal_rtc_dst_skip_next_alarm)
-    {
-        _cyhal_rtc_dst_skip_next_alarm = false;
-    }
-    else if (NULL != _cyhal_rtc_user_handler)
+    if (NULL != _cyhal_rtc_user_handler)
     {
         (*_cyhal_rtc_user_handler)(_cyhal_rtc_handler_arg, CYHAL_RTC_ALARM);
     }
@@ -200,15 +148,23 @@ void Cy_RTC_CenturyInterrupt(void)
     _cyhal_rtc_set_century(_cyhal_rtc_get_century() + 100);
 }
 
-static cy_rslt_t _cyhal_rtc_init_common(const cy_stc_rtc_config_t* default_time)
+cy_rslt_t cyhal_rtc_init(cyhal_rtc_t *obj)
 {
+    CY_UNUSED_PARAMETER(obj);
+    CY_ASSERT(NULL != obj);
     cy_rslt_t rslt = CY_RSLT_SUCCESS;
     if (_cyhal_rtc_get_state() == _CYHAL_RTC_STATE_UNINITIALIZED)
     {
         if (Cy_RTC_IsExternalResetOccurred())
         {
             // Reset to default time
-            Cy_RTC_SetDateAndTime(default_time);
+            static const cy_stc_rtc_config_t defaultTime = {
+                .dayOfWeek = CY_RTC_SATURDAY,
+                .date = 1,
+                .month = 1,
+                .year = 0,
+            };
+            Cy_RTC_SetDateAndTime(&defaultTime);
             _cyhal_rtc_set_century(_CYHAL_RTC_INIT_CENTURY);
         }
 
@@ -223,65 +179,29 @@ static cy_rslt_t _cyhal_rtc_init_common(const cy_stc_rtc_config_t* default_time)
     }
     else if(_cyhal_rtc_get_state() == _CYHAL_RTC_STATE_ENABLED || _cyhal_rtc_get_state() == _CYHAL_RTC_STATE_TIME_SET)
     {
-        if (Cy_RTC_GetInterruptStatus() & CY_RTC_INTR_CENTURY)
+        if(Cy_RTC_GetInterruptStatus() & CY_RTC_INTR_CENTURY)
             Cy_RTC_CenturyInterrupt();
     }
 
     Cy_RTC_ClearInterrupt(CY_RTC_INTR_CENTURY);
     Cy_RTC_SetInterruptMask(CY_RTC_INTR_CENTURY);
-    _cyhal_irq_register(srss_interrupt_backup_IRQn, _CYHAL_RTC_DEFAULT_PRIORITY, _cyhal_rtc_isr_handler);
+    static const cy_stc_sysint_t irqCfg = {.intrSrc = srss_interrupt_backup_IRQn, .intrPriority = _CYHAL_RTC_DEFAULT_PRIORITY};
+    Cy_SysInt_Init(&irqCfg, &_cyhal_rtc_isr_handler);
 
     if (rslt == CY_RSLT_SUCCESS)
     {
         _cyhal_rtc_dst = NULL;
-        _cyhal_irq_enable(srss_interrupt_backup_IRQn);
+        NVIC_EnableIRQ(srss_interrupt_backup_IRQn);
     }
 
     return rslt;
 }
 
-cy_rslt_t cyhal_rtc_init(cyhal_rtc_t *obj)
-{
-    CY_UNUSED_PARAMETER(obj);
-    CY_ASSERT(NULL != obj);
-
-    static const cy_stc_rtc_config_t default_time =
-    {
-        .dayOfWeek = CY_RTC_SATURDAY,
-        .date = 1,
-        .month = 1,
-        .year = 0,
-    };
-    return _cyhal_rtc_init_common(&default_time);
-}
-
-cy_rslt_t cyhal_rtc_init_cfg(cyhal_rtc_t *obj, const cyhal_rtc_configurator_t *cfg)
-{
-    CY_UNUSED_PARAMETER(obj);
-    CY_ASSERT(NULL != obj);
-
-    cy_rslt_t rslt = _cyhal_rtc_init_common(cfg->config);
-    if (NULL != cfg->dst_config)
-    {
-        _cyhal_rtc_set_state(_CYHAL_RTC_STATE_TIME_SET);
-
-        cy_stc_rtc_config_t dateTime;
-        Cy_RTC_GetDateAndTime(&dateTime);
-        rslt = Cy_RTC_EnableDstTime(cfg->dst_config, &dateTime);
-        if (rslt == CY_RSLT_SUCCESS)
-        {
-            obj->dst = *(cfg->dst_config);
-            _cyhal_rtc_dst = &(obj->dst);
-        }
-    }
-    return rslt;
-}
-
 void cyhal_rtc_free(cyhal_rtc_t *obj)
 {
     CY_UNUSED_PARAMETER(obj);
     CY_ASSERT(NULL != obj);
-    _cyhal_irq_free(srss_interrupt_backup_IRQn);
+    NVIC_DisableIRQ(srss_interrupt_backup_IRQn);
 
     Cy_RTC_SetInterruptMask(CY_RTC_INTR_CENTURY);
     _cyhal_rtc_dst = NULL;
@@ -298,66 +218,68 @@ cy_rslt_t cyhal_rtc_read(cyhal_rtc_t *obj, struct tm *time)
 {
     CY_UNUSED_PARAMETER(obj);
     CY_ASSERT(NULL != obj);
+    // The number of days that precede each month of the year, not including Feb 29
+    static const uint16_t CUMULATIVE_DAYS[] = {0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334};
 
-    cy_stc_rtc_config_t dateTime = { .hrFormat = CY_RTC_24_HOURS };
+    cy_stc_rtc_config_t dateTime;
     uint32_t savedIntrStatus = cyhal_system_critical_section_enter();
     Cy_RTC_GetDateAndTime(&dateTime);
-    const int year = (int)(dateTime.year + _cyhal_rtc_get_century());
+    int year = (int)(dateTime.year + _cyhal_rtc_get_century());
     cyhal_system_critical_section_exit(savedIntrStatus);
 
-    _cyhal_rtc_from_pdl_time(&dateTime, year, time);
+    time->tm_sec = (int)dateTime.sec;
+    time->tm_min = (int)dateTime.min;
+    time->tm_hour = (int)dateTime.hour;
+    time->tm_mday = (int)dateTime.date;
+    time->tm_mon = (int)(dateTime.month - 1u);
+    time->tm_year = (int)(year - _CYHAL_RTC_TM_YEAR_BASE);
+    time->tm_wday = (int)(dateTime.dayOfWeek - 1u);
+    time->tm_yday = (int)CUMULATIVE_DAYS[time->tm_mon] + (int)dateTime.date - 1 +
+        (((int)(dateTime.month) >= 3 && (int)(Cy_RTC_IsLeapYear((uint32_t)year) ? 1u : 0u)));
+    time->tm_isdst = -1;
 
     return CY_RSLT_SUCCESS;
 }
 
 cy_rslt_t cyhal_rtc_write(cyhal_rtc_t *obj, const struct tm *time)
-{
-    CY_ASSERT(NULL != obj);
-    return cyhal_rtc_write_direct(obj, time->tm_sec, time->tm_min, time->tm_hour, time->tm_mday,
-                                    time->tm_mon + 1, _CYHAL_RTC_TM_YEAR_BASE + time->tm_year);
-}
-
-cy_rslt_t cyhal_rtc_write_direct(cyhal_rtc_t *obj, uint32_t sec, uint32_t min, uint32_t hour,
-                                 uint32_t day, uint32_t month, uint32_t year)
 {
     CY_UNUSED_PARAMETER(obj);
-    uint32_t year2digit = year % 100;
+    CY_ASSERT(NULL != obj);
+    uint32_t year2digit = time->tm_year % 100;
+    cy_stc_rtc_config_t newtime = {
+    .sec = (uint32_t)time->tm_sec,
+    .min = (uint32_t)time->tm_min,
+    .hour = (uint32_t)time->tm_hour,
+    .hrFormat = CY_RTC_24_HOURS,
+    .dayOfWeek = (uint32_t)time->tm_wday + 1,
+    .date = (uint32_t)time->tm_mday,
+    .month = (uint32_t)(time->tm_mon + 1),
+    .year = year2digit
+    };
 
     cy_rslt_t rslt;
     uint32_t retry = 0;
-    if (!CY_RTC_IS_SEC_VALID(sec) || !CY_RTC_IS_MIN_VALID(min) || !CY_RTC_IS_HOUR_VALID(hour) || !CY_RTC_IS_MONTH_VALID(month) || !CY_RTC_IS_YEAR_SHORT_VALID(year2digit))
-    {
-        return CY_RSLT_RTC_BAD_ARGUMENT;
-    }
-    do
-    {
+    static const uint32_t MAX_RETRY = 10, RETRY_DELAY_MS = 1;
+    do {
         if (retry != 0)
-            _CYHAL_RTC_WAIT_ONE_MS();
+            Cy_SysLib_Delay(RETRY_DELAY_MS);
         uint32_t savedIntrStatus = cyhal_system_critical_section_enter();
-        rslt = Cy_RTC_SetDateAndTimeDirect(sec, min, hour, day, month, year2digit);
+        rslt = (cy_rslt_t)Cy_RTC_SetDateAndTime(&newtime);
         if (rslt == CY_RSLT_SUCCESS)
-            _cyhal_rtc_set_century((uint16_t)(year) - (uint16_t)(year2digit));
+            _cyhal_rtc_set_century((uint16_t)(time->tm_year) - (uint16_t)(year2digit) + (uint16_t)(_CYHAL_RTC_TM_YEAR_BASE));
         cyhal_system_critical_section_exit(savedIntrStatus);
         ++retry;
-    } while (rslt == CY_RTC_INVALID_STATE && retry < _CYHAL_RTC_MAX_RETRY);
+    } while (rslt == CY_RTC_INVALID_STATE && retry < MAX_RETRY);
 
-    retry = 0;
-    while (CY_RTC_BUSY == Cy_RTC_GetSyncStatus() && retry < _CYHAL_RTC_MAX_RETRY)
-    {
-        _CYHAL_RTC_WAIT_ONE_MS();
-        ++retry;
-    }
+    while (CY_RTC_BUSY == Cy_RTC_GetSyncStatus()) { }
 
     if (rslt == CY_RSLT_SUCCESS)
-    {
         _cyhal_rtc_set_state(_CYHAL_RTC_STATE_TIME_SET);
-    }
     return rslt;
 }
 
 cy_rslt_t cyhal_rtc_set_dst(cyhal_rtc_t *obj, const cyhal_rtc_dst_t *start, const cyhal_rtc_dst_t *stop)
 {
-    CY_UNUSED_PARAMETER(obj);
     CY_ASSERT(NULL != obj);
     CY_ASSERT(NULL != start);
     CY_ASSERT(NULL != stop);
@@ -370,18 +292,16 @@ cy_rslt_t cyhal_rtc_set_dst(cyhal_rtc_t *obj, const cyhal_rtc_dst_t *start, cons
     cy_rslt_t rslt = Cy_RTC_EnableDstTime(&(obj->dst), &dateTime);
     if (rslt == CY_RSLT_SUCCESS)
         _cyhal_rtc_dst = &(obj->dst);
-
     return rslt;
 }
 
 bool cyhal_rtc_is_dst(cyhal_rtc_t *obj)
 {
-    CY_UNUSED_PARAMETER(obj);
     CY_ASSERT(NULL != obj);
 
     cy_stc_rtc_config_t dateTime;
     Cy_RTC_GetDateAndTime(&dateTime);
-    return Cy_RTC_GetDstStatus(_cyhal_rtc_dst, &dateTime);
+    return Cy_RTC_GetDstStatus(&(obj->dst), &dateTime);
 }
 
 cy_rslt_t cyhal_rtc_set_alarm(cyhal_rtc_t *obj, const struct tm *time, cyhal_alarm_active_t active)
@@ -389,9 +309,7 @@ cy_rslt_t cyhal_rtc_set_alarm(cyhal_rtc_t *obj, const struct tm *time, cyhal_ala
     // Note: the hardware does not support year matching
     CY_UNUSED_PARAMETER(obj);
     CY_ASSERT(NULL != obj);
-    _cyhal_rtc_dst_skip_next_alarm = false;
-    cy_stc_rtc_alarm_t alarm =
-    {
+    cy_stc_rtc_alarm_t alarm = {
     .sec = (uint32_t)time->tm_sec,
     .secEn = active.en_sec ? CY_RTC_ALARM_ENABLE : CY_RTC_ALARM_DISABLE,
     .min = (uint32_t)time->tm_min,
@@ -406,29 +324,7 @@ cy_rslt_t cyhal_rtc_set_alarm(cyhal_rtc_t *obj, const struct tm *time, cyhal_ala
     .monthEn = active.en_month ? CY_RTC_ALARM_ENABLE : CY_RTC_ALARM_DISABLE,
     .almEn = CY_RTC_ALARM_ENABLE
     };
-
-    cy_rslt_t rslt;
-    uint32_t retry = 0;
-    do
-    {
-        if (retry != 0)
-            _CYHAL_RTC_WAIT_ONE_MS();
-        rslt = (cy_rslt_t)Cy_RTC_SetAlarmDateAndTime(&alarm, CY_RTC_ALARM_1);
-        ++retry;
-    } while (rslt == CY_RTC_INVALID_STATE && retry < _CYHAL_RTC_MAX_RETRY);
-
-    return rslt;
-}
-
-static uint32_t _cyhal_rtc_update_field(uint32_t remaining, uint32_t* curr, uint32_t *next, uint32_t max)
-{
-    *curr += remaining % max;
-    if (*curr >= max)
-    {
-        *curr %= max;
-        (*next)++;
-    }
-    return remaining / max;
+    return (cy_rslt_t)Cy_RTC_SetAlarmDateAndTime(&alarm, CY_RTC_ALARM_1);
 }
 
 cy_rslt_t cyhal_rtc_set_alarm_by_seconds(cyhal_rtc_t *obj, const uint32_t seconds)
@@ -441,113 +337,24 @@ cy_rslt_t cyhal_rtc_set_alarm_by_seconds(cyhal_rtc_t *obj, const uint32_t second
     if(seconds > SECONDS_IN_YEAR)
         return CY_RSLT_RTC_BAD_ARGUMENT;
 
-    cy_stc_rtc_config_t now;
+    struct tm now;
     uint32_t savedIntrStatus = cyhal_system_critical_section_enter();
-    Cy_RTC_GetDateAndTime(&now);
-    const int year = (int)(now.year + _cyhal_rtc_get_century());
+    cyhal_rtc_read(obj, &now);
     cyhal_system_critical_section_exit(savedIntrStatus);
 
-    bool nowDst = _cyhal_rtc_dst && Cy_RTC_GetDstStatus(_cyhal_rtc_dst, &now);
-
-    uint32_t remaining = seconds;
-    remaining = _cyhal_rtc_update_field(remaining, &now.sec, &now.min, 60);
-    remaining = _cyhal_rtc_update_field(remaining, &now.min, &now.hour, 60);
-    remaining = _cyhal_rtc_update_field(remaining, &now.hour, &now.date, 24);
-
-    uint32_t days;
-    now.date += remaining;
-    while (now.date > (days = Cy_RTC_DaysInMonth(now.month, year)))
-    {
-        now.date -= days;
-        now.month++;
-        if (now.month > 12)
-        {
-            now.year++;
-            now.month = 1;
-        }
-    }
-
-    bool setSkipNextAlarm = false;
+    time_t future_time_t = mktime(&now) + seconds;
+    struct tm* future = localtime(&future_time_t);
 
-    // Handle crossing of daylight savings time boundaries
-    if (_cyhal_rtc_dst)
-    {
-        bool futureDst = Cy_RTC_GetDstStatus(_cyhal_rtc_dst, &now);
-
-        if (nowDst && !futureDst)
-        {
-            // If the alarm time is within the hour following the end of DST,
-            // ignore the first alarm since the adjusted time will be before
-            // the DST boundary causing two alarms to occur: one before the
-            // boundary and one after the boundary.
-            if (now.hour == _cyhal_rtc_dst->stopDst.hour)
-            {
-                setSkipNextAlarm = true;
-            }
-
-            if (now.hour == 0)
-            {
-                now.hour = 23;
-                now.date--;
-
-                if (now.date < 1)
-                {
-                    now.month--;
-                    if (now.month < 1)
-                    {
-                        now.month = 12;
-                        now.year--;
-                    }
-
-                    now.date = Cy_RTC_DaysInMonth(now.month, year);
-                }
-            }
-            else
-            {
-                now.hour--;
-            }
-        }
-        else if (!nowDst && futureDst)
-        {
-            now.hour++;
-            if (now.hour >= 24)
-            {
-                now.hour = 0;
-                now.date++;
-
-                if (now.date > days)
-                {
-                    now.date = 1;
-                    now.month++;
-                    if (now.month > 12)
-                    {
-                        now.month = 1;
-                        // Increment year, but alarm doesn't care
-                    }
-                }
-            }
-        }
-    }
-
-    struct tm future;
-    _cyhal_rtc_from_pdl_time(&now, year, &future);
-
-    static const cyhal_alarm_active_t active =
-    {
+    static const cyhal_alarm_active_t active = {
         .en_sec   = CY_RTC_ALARM_ENABLE,
         .en_min   = CY_RTC_ALARM_ENABLE,
         .en_hour  = CY_RTC_ALARM_ENABLE,
-        .en_day   = CY_RTC_ALARM_DISABLE, // We do not actually compute the day as we don't care.
-        .en_date  = CY_RTC_ALARM_ENABLE,  // The absolute time (eg: date) is what is important.
+        .en_day   = CY_RTC_ALARM_ENABLE,
+        .en_date  = CY_RTC_ALARM_ENABLE,
         .en_month = CY_RTC_ALARM_ENABLE
     };
 
-    savedIntrStatus = cyhal_system_critical_section_enter();
-    cy_rslt_t result = cyhal_rtc_set_alarm(obj, &future, active);
-    _cyhal_rtc_dst_skip_next_alarm = setSkipNextAlarm;
-    cyhal_system_critical_section_exit(savedIntrStatus);
-
-    return result;
+    return cyhal_rtc_set_alarm(obj, future, active);
 }
 
 void cyhal_rtc_register_callback(cyhal_rtc_t *obj, cyhal_rtc_event_callback_t callback, void *callback_arg)
@@ -567,13 +374,12 @@ void cyhal_rtc_enable_event(cyhal_rtc_t *obj, cyhal_rtc_event_t event, uint8_t i
     CY_ASSERT(NULL != obj);
     CY_ASSERT(CYHAL_RTC_ALARM == event);
     Cy_RTC_ClearInterrupt(CY_RTC_INTR_ALARM1 | CY_RTC_INTR_ALARM2);
-    uint32_t alarm2_status = (Cy_RTC_GetInterruptMask() & CY_RTC_INTR_ALARM2);
-    Cy_RTC_SetInterruptMask((enable ? CY_RTC_INTR_ALARM1 : 0) | CY_RTC_INTR_CENTURY | alarm2_status);
-    _cyhal_irq_set_priority(srss_interrupt_backup_IRQn, intr_priority);
+    Cy_RTC_SetInterruptMask((enable ? CY_RTC_INTR_ALARM1 : 0) | CY_RTC_INTR_CENTURY);
+    NVIC_SetPriority(srss_interrupt_backup_IRQn, intr_priority);
 }
 
 #if defined(__cplusplus)
 }
 #endif
 
-#endif /* CYHAL_DRIVER_AVAILABLE_RTC */
+#endif /* (defined(CY_IP_MXS40SSRSS) || defined(CY_IP_MXS40SRSS)) && SRSS_BACKUP_PRESENT */

bsp/cypress/psoc6-cy8cproto-4343w/README.md

-# Cypress CY8CKIT-062-BLE PSoC 6 BLE Pioneer Kit 说明
+# Cypress Psoc6-CY8CKIT-062S2-43012 说明
 
 ## 简介
 
-本文档为Cypress为PSoC6 BLE Pioneer Kit开发板提供的 BSP (板级支持包) 说明。
+本文档为 `RT-Thread` 为 `PSoC6 CY8CKIT-062S2-43012`开发板提供的 BSP (板级支持包) 说明。
 
 主要内容如下：
 
@@ -10,89 +10,91 @@
 - BSP 快速上手
 - 进阶使用方法
 
-通过阅读快速上手章节开发者可以快速地上手该 BSP，将 RT-Thread 运行在开发板上。在进阶使用指南章节，将会介绍更多高级功能，帮助开发者利用 RT-Thread 驱动更多板载资源。
+通过阅读快速上手章节开发者可以快速地上手该 BSP，将 RT-Thread 运行在开发板上。在进阶使用指南章节，将会介绍更多高级功能，帮助开发者利用 `RT-Thread` 驱动更多板载资源。
 
 ## 开发板介绍
 
-CY8CKIT-062-BLE PSoC6 BLE Pioneer Kit 是赛普拉斯推出的一款32位双核CPU子系统（ ARM Cortex-M4 和 ARM Cortex-M0）的开发板，具有单周期乘法的150-MHz Arm Cortex-M4F CPU (浮点和
-存储器保护单元)，100-MHz Cortex M0+ CPU，带单周期乘法和MPU，可以充分发挥 PSoC6 双核芯片性能。
+`PSoC6 CY8CKIT-062S2-43012` 是赛普拉斯推出的一款32位双核CPU子系统（ ARM Cortex-M4 和 ARM Cortex-M0）的开发板，具有单周期乘法的150-MHz Arm Cortex-M4F CPU (浮点和存储器保护单元)，100-MHz Cortex M0+ CPU，带单周期乘法和MPU，可以充分发挥 PSoC6 双核芯片性能。
 
-开发板外观详细信息：https://www.cypress.com/file/390496/download
+开发板外观详细信息：[CY8CPROTO-062-4343W - Infineon Technologies](https://www.infineon.com/cms/en/product/evaluation-boards/cy8cproto-062-4343w/)
 
+该开发板核心 **板载资源** 如下：
 
-该开发板常用 **板载资源** 如下：
-
-- MCU：CY8C6347BZI-BLD53，Cortex-M4主频 150MHz，Cortex-M0主频 100MHz，1 MB 应用闪存，32 KB EEPROM 区域和32 KB 安全闪存 ，288 KB 集成SRAM
-	    MCU手册更多详细信息请参考文档 https://www.cypress.com/file/457541/download
-		
-- 开发环境：ModusToolbox 2.0
-		PSoC® Creator™ 下载链接 https://www.cypress.com/products/modustoolbox-software-environment
-		
+- MCU：CY8C624ABZI-S2D44，Cortex-M4主频 150MHz，Cortex-M0主频 100MHz，2MB Flash 和 1MB SRAM
+	    MCU手册更多详细信息请参考文档 [PSoC 6 MCU: CY8C62x8, CY8C62xA Datasheet (infineon.com)](https://www.infineon.com/dgdl/Infineon-PSOC_6_MCU_CY8C62X8_CY8C62XA-DataSheet-v17_00-EN.pdf?fileId=8ac78c8c7d0d8da4017d0ee7d03a70b1)
+- 板载资源：microSD card , 64-Mb Quad-SPI NOR flash， CYW43012 Wi-Fi + Bluetooth Combo Chip
+- 开发环境：ModusToolbox 2.0/MDK V5
+		PSoC® Creator™ 下载链接 [ModusToolbox™ Software - Infineon Technologies](https://www.infineon.com/cms/en/design-support/tools/sdk/modustoolbox-software/)
 - 开发板：CY8CKIT-062-BLE PSoC 6 BLE Pioneer Kit
 		开发板更多详细信息请参考文档 https://www.cypress.com/file/390496/download
 
-
 ## 外设支持
 
-本 BSP 目前对外设的支持情况详细信息请参考文档 https://www.cypress.com/file/390496/download
+本 BSP 目前对外设的支持情况如下：
+
+| **片上外设** | **支持情况** |   **备注**    |
+| :----------: | :----------: | :-----------: |
+|  USB 转串口  |     支持     |       —       |
+|     GPIO     |     支持     |       —       |
+|     UART     |     支持     |    UART0-5    |
+|     I2C      |     支持     | 软件+硬件 I2C |
+|     RTC      |     支持     |       —       |
+|     WDT      |     支持     |       —       |
+|     PWM      |     支持     |       —       |
+|     SPI      |     支持     |       —       |
+|  HardTimer   |   暂不支持   |       —       |
+|     DAC      |   暂不支持   |       —       |
+|    Flash     |   暂不支持   |       —       |
+|     SDIO     |   暂不支持   |       —       |
+|  USB Device  |   暂不支持   |       —       |
+|   USB Host   |   暂不支持   |       —       |
 
 ## 使用说明
 
-使用说明分为如下两个章节：
-
 - 快速上手
 
     本章节是为刚接触 RT-Thread 的新手准备的使用说明，遵循简单的步骤即可将 RT-Thread 操作系统运行在该开发板上，看到实验效果 。
 
-- 进阶使用
-
-    本章节是为需要在 RT-Thread 操作系统上使用赛普拉斯开发板资源的开发者准备的。
-
 
 ### 快速上手
 
-本 BSP 以 ModusToolbox 2.0开发环境（GCC），介绍如何将系统运行起来。
+本 BSP 是以 MDK V5 开发环境（编译器：ARMClang ），接下来介绍如何将系统运行起来。
 
 #### 硬件连接
 
-使用Type-C数据线连接开发板到 PC.
+使用数据线连接开发板到 PC。
 
 #### 编译下载
-1, 安装ModusToolbox 2.0时请使用默认路径
+1、配置工程：
 
-2, 打开ModusToolbox 2.0时workspace选择工程所在目录下（例如workspace: C:\Git\rt-thread\bsp\cypress）
+首先打开 MDK ，若没有安装 `Cypress-PSoC6` 的芯片支持包会提示在线安装，根据提示安装即可。若受网络问题，可以进入 [keil](https://www.keil.com/dd2/pack) 官网下载安装包，离线安装。
 
-3, 在Project Explorer的空白处右键，点击import，General->Existing Projects into Workspace ->next，点击Browse选择
-   此BSP所在目录加载工程->Finish
+![mdk_package](./figures/mdk_package.png)
 
-4, 下载lib：在左下角Quick Panel的Tools栏，点击library Manager-> BSPs下面勾选CY8CKIT-062-BLE (若已勾选可以不用再选)
-			-> Libraries里PSoC6 Base Libraries下面全部勾选core-lib,psoc6cm0p,psoc6hal,psoc6make,psoc6pdl -> 点击apply 进行下载
+2、 编译此工程：在安装好芯片支持包后，在 `MDK`工程中进行编译。
 
-5, 编译此工程
+3、下载此工程：
 
-6, 下载此工程
 
-
-工程默认配置使用 SWD方式下载程序，Type-C数据线连接开发板，编译之后直接点击下载按钮即可。
+工程默认配置使用板载 `DAP-LINK` 使用 `SWD` 方式下载程序，使用数据线连接开发板，编译之后直接点击下载按钮即可。
 
 #### 运行结果
 
-下载程序成功之后，系统会自动运行。打开终端工具串口小助手，复位设备后，可以看到 RT-Thread 的输出信息:
+下载程序成功之后，系统会自动运行。打开终端工具串口助手，选择波特率为 115200。复位设备后，LED 将会以 500HZ 的频率闪烁，而且在终端上可以看到 `RT-Thread` 的输出信息：
 
-注：推荐使用串口调试助手如：sscom
+注：推荐使用串口调试助手如：`MobaXterm`
 
 ```
+
  \ | /
 - RT -     Thread Operating System
- / | \     4.0.3 build Jan  6 2020
- 2006 - 2019 Copyright by rt-thread team
-hello rt-thread
-msh >hello rt-thread
-hello rt-thread
+ / | \     4.1.1 build Jul 25 2022 18:03:35
+ 2006 - 2022 Copyright by RT-Thread team
+msh >
 ```
 
 ## 联系人信息
 
 维护人:
 
-- [amyqian379](https://github.com/amyqian379)
+- [Rbb666](https://github.com/Rbb666)
\ No newline at end of file

bsp/cypress/psoc6-cy8cproto-4343w/board/Kconfig

@@ -196,6 +196,23 @@ menu "On-chip Peripheral Drivers"
                 endif
         endif
 
+    menuconfig BSP_USING_RTC
+        bool "Enable RTC"
+        select RT_USING_RTC
+        default n
+        if BSP_USING_RTC
+            choice
+                prompt "Select clock source"
+                default BSP_RTC_USING_LSE
+
+                config BSP_RTC_USING_LSE
+                    bool "RTC USING LSE"
+
+                config BSP_RTC_USING_LSI
+                    bool "RTC USING LSI"
+            endchoice
+        endif
+
     config BSP_USING_WDT
         bool "Enable Watchdog Timer"
         select RT_USING_WDT