/* * File : s3c24x0.h * This file is part of RT-Thread RTOS * COPYRIGHT (C) 2006, RT-Thread Develop Team * * The license and distribution terms for this file may be * found in the file LICENSE in this distribution or at * http://openlab.rt-thread.com/license/LICENSE * * Change Logs: * Date Author Notes * 2009-12-11 Bernard first version */ #ifndef __S3C24X0_H__ #define __S3C24X0_H__ #ifdef __cplusplus extern "C" { #endif #include /** * @addtogroup S3C24X0 */ /*@{*/ // Memory control #define BWSCON (*(volatile unsigned *)0x48000000) //Bus width & wait status #define BANKCON0 (*(volatile unsigned *)0x48000004) //Boot ROM control #define BANKCON1 (*(volatile unsigned *)0x48000008) //BANK1 control #define BANKCON2 (*(volatile unsigned *)0x4800000c) //BANK2 cControl #define BANKCON3 (*(volatile unsigned *)0x48000010) //BANK3 control #define BANKCON4 (*(volatile unsigned *)0x48000014) //BANK4 control #define BANKCON5 (*(volatile unsigned *)0x48000018) //BANK5 control #define BANKCON6 (*(volatile unsigned *)0x4800001c) //BANK6 control #define BANKCON7 (*(volatile unsigned *)0x48000020) //BANK7 control #define REFRESH (*(volatile unsigned *)0x48000024) //DRAM/SDRAM efresh #define BANKSIZE (*(volatile unsigned *)0x48000028) //Flexible Bank Size #define MRSRB6 (*(volatile unsigned *)0x4800002c) //Mode egister set for SDRAM #define MRSRB7 (*(volatile unsigned *)0x48000030) //Mode egister set for SDRAM // USB Host // INTERRUPT #define SRCPND (*(volatile unsigned *)0x4a000000) //Interrupt request status #define INTMOD (*(volatile unsigned *)0x4a000004) //Interrupt mode control #define INTMSK (*(volatile unsigned *)0x4a000008) //Interrupt mask control #define PRIORITY (*(volatile unsigned *)0x4a00000c) //IRQ priority control #define INTPND (*(volatile unsigned *)0x4a000010) //Interrupt request status #define INTOFFSET (*(volatile unsigned *)0x4a000014) //Interruot request source offset #define SUBSRCPND (*(volatile unsigned *)0x4a000018) //Sub source pending #define INTSUBMSK (*(volatile unsigned *)0x4a00001c) //Interrupt sub mask // DMA #define DISRC0 (*(volatile unsigned *)0x4b000000) //DMA 0 Initial source #define DISRCC0 (*(volatile unsigned *)0x4b000004) //DMA 0 Initial source control #define DIDST0 (*(volatile unsigned *)0x4b000008) //DMA 0 Initial Destination #define DIDSTC0 (*(volatile unsigned *)0x4b00000c) //DMA 0 Initial Destination control #define DCON0 (*(volatile unsigned *)0x4b000010) //DMA 0 Control #define DSTAT0 (*(volatile unsigned *)0x4b000014) //DMA 0 Status #define DCSRC0 (*(volatile unsigned *)0x4b000018) //DMA 0 Current source #define DCDST0 (*(volatile unsigned *)0x4b00001c) //DMA 0 Current destination #define DMASKTRIG0 (*(volatile unsigned *)0x4b000020) //DMA 0 Mask trigger #define DISRC1 (*(volatile unsigned *)0x4b000040) //DMA 1 Initial source #define DISRCC1 (*(volatile unsigned *)0x4b000044) //DMA 1 Initial source control #define DIDST1 (*(volatile unsigned *)0x4b000048) //DMA 1 Initial Destination #define DIDSTC1 (*(volatile unsigned *)0x4b00004c) //DMA 1 Initial Destination control #define DCON1 (*(volatile unsigned *)0x4b000050) //DMA 1 Control #define DSTAT1 (*(volatile unsigned *)0x4b000054) //DMA 1 Status #define DCSRC1 (*(volatile unsigned *)0x4b000058) //DMA 1 Current source #define DCDST1 (*(volatile unsigned *)0x4b00005c) //DMA 1 Current destination #define DMASKTRIG1 (*(volatile unsigned *)0x4b000060) //DMA 1 Mask trigger #define DISRC2 (*(volatile unsigned *)0x4b000080) //DMA 2 Initial source #define DISRCC2 (*(volatile unsigned *)0x4b000084) //DMA 2 Initial source control #define DIDST2 (*(volatile unsigned *)0x4b000088) //DMA 2 Initial Destination #define DIDSTC2 (*(volatile unsigned *)0x4b00008c) //DMA 2 Initial Destination control #define DCON2 (*(volatile unsigned *)0x4b000090) //DMA 2 Control #define DSTAT2 (*(volatile unsigned *)0x4b000094) //DMA 2 Status #define DCSRC2 (*(volatile unsigned *)0x4b000098) //DMA 2 Current source #define DCDST2 (*(volatile unsigned *)0x4b00009c) //DMA 2 Current destination #define DMASKTRIG2 (*(volatile unsigned *)0x4b0000a0) //DMA 2 Mask trigger #define DISRC3 (*(volatile unsigned *)0x4b0000c0) //DMA 3 Initial source #define DISRCC3 (*(volatile unsigned *)0x4b0000c4) //DMA 3 Initial source control #define DIDST3 (*(volatile unsigned *)0x4b0000c8) //DMA 3 Initial Destination #define DIDSTC3 (*(volatile unsigned *)0x4b0000cc) //DMA 3 Initial Destination control #define DCON3 (*(volatile unsigned *)0x4b0000d0) //DMA 3 Control #define DSTAT3 (*(volatile unsigned *)0x4b0000d4) //DMA 3 Status #define DCSRC3 (*(volatile unsigned *)0x4b0000d8) //DMA 3 Current source #define DCDST3 (*(volatile unsigned *)0x4b0000dc) //DMA 3 Current destination #define DMASKTRIG3 (*(volatile unsigned *)0x4b0000e0) //DMA 3 Mask trigger // CLOCK & POWER MANAGEMENT #define LOCKTIME (*(volatile unsigned *)0x4c000000) //PLL lock time counter #define MPLLCON (*(volatile unsigned *)0x4c000004) //MPLL Control #define UPLLCON (*(volatile unsigned *)0x4c000008) //UPLL Control #define CLKCON (*(volatile unsigned *)0x4c00000c) //Clock generator control #define CLKSLOW (*(volatile unsigned *)0x4c000010) //Slow clock control #define CLKDIVN (*(volatile unsigned *)0x4c000014) //Clock divider control #define CAMDIVN (*(volatile unsigned *)0x4c000018) //USB, CAM Clock divider control // LCD CONTROLLER #define LCDCON1 (*(volatile unsigned *)0x4d000000) //LCD control 1 #define LCDCON2 (*(volatile unsigned *)0x4d000004) //LCD control 2 #define LCDCON3 (*(volatile unsigned *)0x4d000008) //LCD control 3 #define LCDCON4 (*(volatile unsigned *)0x4d00000c) //LCD control 4 #define LCDCON5 (*(volatile unsigned *)0x4d000010) //LCD control 5 #define LCDSADDR1 (*(volatile unsigned *)0x4d000014) //STN/TFT Frame buffer start address 1 #define LCDSADDR2 (*(volatile unsigned *)0x4d000018) //STN/TFT Frame buffer start address 2 #define LCDSADDR3 (*(volatile unsigned *)0x4d00001c) //STN/TFT Virtual screen address set #define REDLUT (*(volatile unsigned *)0x4d000020) //STN Red lookup table #define GREENLUT (*(volatile unsigned *)0x4d000024) //STN Green lookup table #define BLUELUT (*(volatile unsigned *)0x4d000028) //STN Blue lookup table #define DITHMODE (*(volatile unsigned *)0x4d00004c) //STN Dithering mode #define TPAL (*(volatile unsigned *)0x4d000050) //TFT Temporary palette #define LCDINTPND (*(volatile unsigned *)0x4d000054) //LCD Interrupt pending #define LCDSRCPND (*(volatile unsigned *)0x4d000058) //LCD Interrupt source #define LCDINTMSK (*(volatile unsigned *)0x4d00005c) //LCD Interrupt mask #define LPCSEL (*(volatile unsigned *)0x4d000060) //LPC3600 Control #define PALETTE 0x4d000400 //Palette start address // NAND flash #define NFCONF (*(volatile unsigned *)0x4e000000) //NAND Flash configuration #define NFCMD (*(volatile unsigned *)0x4e000004) //NADD Flash command #define NFADDR (*(volatile unsigned *)0x4e000008) //NAND Flash address #define NFDATA (*(volatile unsigned *)0x4e00000c) //NAND Flash data #define NFSTAT (*(volatile unsigned *)0x4e000010) //NAND Flash operation status #define NFECC (*(volatile unsigned *)0x4e000014) //NAND Flash ECC #define NFECC0 (*(volatile unsigned *)0x4e000014) #define NFECC1 (*(volatile unsigned *)0x4e000015) #define NFECC2 (*(volatile unsigned *)0x4e000016) // UART #define U0BASE (*(volatile unsigned *)0x50000000) //UART 0 Line control #define ULCON0 (*(volatile unsigned *)0x50000000) //UART 0 Line control #define UCON0 (*(volatile unsigned *)0x50000004) //UART 0 Control #define UFCON0 (*(volatile unsigned *)0x50000008) //UART 0 FIFO control #define UMCON0 (*(volatile unsigned *)0x5000000c) //UART 0 Modem control #define USTAT0 (*(volatile unsigned *)0x50000010) //UART 0 Tx/Rx status #define URXB0 (*(volatile unsigned *)0x50000014) //UART 0 Rx error status #define UFSTAT0 (*(volatile unsigned *)0x50000018) //UART 0 FIFO status #define UMSTAT0 (*(volatile unsigned *)0x5000001c) //UART 0 Modem status #define UBRD0 (*(volatile unsigned *)0x50000028) //UART 0 Baud ate divisor #define U1BASE (*(volatile unsigned *)0x50004000) //UART 1 Line control #define ULCON1 (*(volatile unsigned *)0x50004000) //UART 1 Line control #define UCON1 (*(volatile unsigned *)0x50004004) //UART 1 Control #define UFCON1 (*(volatile unsigned *)0x50004008) //UART 1 FIFO control #define UMCON1 (*(volatile unsigned *)0x5000400c) //UART 1 Modem control #define USTAT1 (*(volatile unsigned *)0x50004010) //UART 1 Tx/Rx status #define URXB1 (*(volatile unsigned *)0x50004014) //UART 1 Rx error status #define UFSTAT1 (*(volatile unsigned *)0x50004018) //UART 1 FIFO status #define UMSTAT1 (*(volatile unsigned *)0x5000401c) //UART 1 Modem status #define UBRD1 (*(volatile unsigned *)0x50004028) //UART 1 Baud ate divisor #define U2BASE *(volatile unsigned *)0x50008000 //UART 2 Line control #define ULCON2 (*(volatile unsigned *)0x50008000) //UART 2 Line control #define UCON2 (*(volatile unsigned *)0x50008004) //UART 2 Control #define UFCON2 (*(volatile unsigned *)0x50008008) //UART 2 FIFO control #define UMCON2 (*(volatile unsigned *)0x5000800c) //UART 2 Modem control #define USTAT2 (*(volatile unsigned *)0x50008010) //UART 2 Tx/Rx status #define URXB2 (*(volatile unsigned *)0x50008014) //UART 2 Rx error status #define UFSTAT2 (*(volatile unsigned *)0x50008018) //UART 2 FIFO status #define UMSTAT2 (*(volatile unsigned *)0x5000801c) //UART 2 Modem status #define UBRD2 (*(volatile unsigned *)0x50008028) //UART 2 Baud ate divisor #ifdef __BIG_ENDIAN #define UTXH0 (*(volatile unsigned char *)0x50000023) //UART 0 Transmission Hold #define URXH0 (*(volatile unsigned char *)0x50000027) //UART 0 Receive buffer #define UTXH1 (*(volatile unsigned char *)0x50004023) //UART 1 Transmission Hold #define URXH1 (*(volatile unsigned char *)0x50004027) //UART 1 Receive buffer #define UTXH2 (*(volatile unsigned char *)0x50008023) //UART 2 Transmission Hold #define URXH2 (*(volatile unsigned char *)0x50008027) //UART 2 Receive buffer #define WrUTXH0(ch) (*(volatile unsigned char *)0x50000023)=(unsigned char)(ch) #define RdURXH0() (*(volatile unsigned char *)0x50000027) #define WrUTXH1(ch) (*(volatile unsigned char *)0x50004023)=(unsigned char)(ch) #define RdURXH1() (*(volatile unsigned char *)0x50004027) #define WrUTXH2(ch) (*(volatile unsigned char *)0x50008023)=(unsigned char)(ch) #define RdURXH2() (*(volatile unsigned char *)0x50008027) #else //Little Endian #define UTXH0 (*(volatile unsigned char *)0x50000020) //UART 0 Transmission Hold #define URXH0 (*(volatile unsigned char *)0x50000024) //UART 0 Receive buffer #define UTXH1 (*(volatile unsigned char *)0x50004020) //UART 1 Transmission Hold #define URXH1 (*(volatile unsigned char *)0x50004024) //UART 1 Receive buffer #define UTXH2 (*(volatile unsigned char *)0x50008020) //UART 2 Transmission Hold #define URXH2 (*(volatile unsigned char *)0x50008024) //UART 2 Receive buffer #define WrUTXH0(ch) (*(volatile unsigned char *)0x50000020)=(unsigned char)(ch) #define RdURXH0() (*(volatile unsigned char *)0x50000024) #define WrUTXH1(ch) (*(volatile unsigned char *)0x50004020)=(unsigned char)(ch) #define RdURXH1() (*(volatile unsigned char *)0x50004024) #define WrUTXH2(ch) (*(volatile unsigned char *)0x50008020)=(unsigned char)(ch) #define RdURXH2() (*(volatile unsigned char *)0x50008024) #endif // PWM TIMER #define TCFG0 (*(volatile unsigned *)0x51000000) //Timer 0 configuration #define TCFG1 (*(volatile unsigned *)0x51000004) //Timer 1 configuration #define TCON (*(volatile unsigned *)0x51000008) //Timer control #define TCNTB0 (*(volatile unsigned *)0x5100000c) //Timer count buffer 0 #define TCMPB0 (*(volatile unsigned *)0x51000010) //Timer compare buffer 0 #define TCNTO0 (*(volatile unsigned *)0x51000014) //Timer count observation 0 #define TCNTB1 (*(volatile unsigned *)0x51000018) //Timer count buffer 1 #define TCMPB1 (*(volatile unsigned *)0x5100001c) //Timer compare buffer 1 #define TCNTO1 (*(volatile unsigned *)0x51000020) //Timer count observation 1 #define TCNTB2 (*(volatile unsigned *)0x51000024) //Timer count buffer 2 #define TCMPB2 (*(volatile unsigned *)0x51000028) //Timer compare buffer 2 #define TCNTO2 (*(volatile unsigned *)0x5100002c) //Timer count observation 2 #define TCNTB3 (*(volatile unsigned *)0x51000030) //Timer count buffer 3 #define TCMPB3 (*(volatile unsigned *)0x51000034) //Timer compare buffer 3 #define TCNTO3 (*(volatile unsigned *)0x51000038) //Timer count observation 3 #define TCNTB4 (*(volatile unsigned *)0x5100003c) //Timer count buffer 4 #define TCNTO4 (*(volatile unsigned *)0x51000040) //Timer count observation 4 // Added for 2440 #define FLTOUT (*(volatile unsigned *)0x560000c0) // Filter output(Read only) #define DSC0 (*(volatile unsigned *)0x560000c4) // Strength control register 0 #define DSC1 (*(volatile unsigned *)0x560000c8) // Strength control register 1 #define MSLCON (*(volatile unsigned *)0x560000cc) // Memory sleep control register // USB DEVICE #ifdef __BIG_ENDIAN #define FUNC_ADDR_REG (*(volatile unsigned char *)0x52000143) //Function address #define PWR_REG (*(volatile unsigned char *)0x52000147) //Power management #define EP_INT_REG (*(volatile unsigned char *)0x5200014b) //EP Interrupt pending and clear #define USB_INT_REG (*(volatile unsigned char *)0x5200015b) //USB Interrupt pending and clear #define EP_INT_EN_REG (*(volatile unsigned char *)0x5200015f) //Interrupt enable #define USB_INT_EN_REG (*(volatile unsigned char *)0x5200016f) #define FRAME_NUM1_REG (*(volatile unsigned char *)0x52000173) //Frame number lower byte #define FRAME_NUM2_REG (*(volatile unsigned char *)0x52000177) //Frame number higher byte #define INDEX_REG (*(volatile unsigned char *)0x5200017b) //Register index #define MAXP_REG (*(volatile unsigned char *)0x52000183) //Endpoint max packet #define EP0_CSR (*(volatile unsigned char *)0x52000187) //Endpoint 0 status #define IN_CSR1_REG (*(volatile unsigned char *)0x52000187) //In endpoint control status #define IN_CSR2_REG (*(volatile unsigned char *)0x5200018b) #define OUT_CSR1_REG (*(volatile unsigned char *)0x52000193) //Out endpoint control status #define OUT_CSR2_REG (*(volatile unsigned char *)0x52000197) #define OUT_FIFO_CNT1_REG (*(volatile unsigned char *)0x5200019b) //Endpoint out write count #define OUT_FIFO_CNT2_REG (*(volatile unsigned char *)0x5200019f) #define EP0_FIFO (*(volatile unsigned char *)0x520001c3) //Endpoint 0 FIFO #define EP1_FIFO (*(volatile unsigned char *)0x520001c7) //Endpoint 1 FIFO #define EP2_FIFO (*(volatile unsigned char *)0x520001cb) //Endpoint 2 FIFO #define EP3_FIFO (*(volatile unsigned char *)0x520001cf) //Endpoint 3 FIFO #define EP4_FIFO (*(volatile unsigned char *)0x520001d3) //Endpoint 4 FIFO #define EP1_DMA_CON (*(volatile unsigned char *)0x52000203) //EP1 DMA interface control #define EP1_DMA_UNIT (*(volatile unsigned char *)0x52000207) //EP1 DMA Tx unit counter #define EP1_DMA_FIFO (*(volatile unsigned char *)0x5200020b) //EP1 DMA Tx FIFO counter #define EP1_DMA_TTC_L (*(volatile unsigned char *)0x5200020f) //EP1 DMA total Tx counter #define EP1_DMA_TTC_M (*(volatile unsigned char *)0x52000213) #define EP1_DMA_TTC_H (*(volatile unsigned char *)0x52000217) #define EP2_DMA_CON (*(volatile unsigned char *)0x5200021b) //EP2 DMA interface control #define EP2_DMA_UNIT (*(volatile unsigned char *)0x5200021f) //EP2 DMA Tx unit counter #define EP2_DMA_FIFO (*(volatile unsigned char *)0x52000223) //EP2 DMA Tx FIFO counter #define EP2_DMA_TTC_L (*(volatile unsigned char *)0x52000227) //EP2 DMA total Tx counter #define EP2_DMA_TTC_M (*(volatile unsigned char *)0x5200022b) #define EP2_DMA_TTC_H (*(volatile unsigned char *)0x5200022f) #define EP3_DMA_CON (*(volatile unsigned char *)0x52000243) //EP3 DMA interface control #define EP3_DMA_UNIT (*(volatile unsigned char *)0x52000247) //EP3 DMA Tx unit counter #define EP3_DMA_FIFO (*(volatile unsigned char *)0x5200024b) //EP3 DMA Tx FIFO counter #define EP3_DMA_TTC_L (*(volatile unsigned char *)0x5200024f) //EP3 DMA total Tx counter #define EP3_DMA_TTC_M (*(volatile unsigned char *)0x52000253) #define EP3_DMA_TTC_H (*(volatile unsigned char *)0x52000257) #define EP4_DMA_CON (*(volatile unsigned char *)0x5200025b) //EP4 DMA interface control #define EP4_DMA_UNIT (*(volatile unsigned char *)0x5200025f) //EP4 DMA Tx unit counter #define EP4_DMA_FIFO (*(volatile unsigned char *)0x52000263) //EP4 DMA Tx FIFO counter #define EP4_DMA_TTC_L (*(volatile unsigned char *)0x52000267) //EP4 DMA total Tx counter #define EP4_DMA_TTC_M (*(volatile unsigned char *)0x5200026b) #define EP4_DMA_TTC_H (*(volatile unsigned char *)0x5200026f) #else // Little Endian #define FUNC_ADDR_REG (*(volatile unsigned char *)0x52000140) //Function address #define PWR_REG (*(volatile unsigned char *)0x52000144) //Power management #define EP_INT_REG (*(volatile unsigned char *)0x52000148) //EP Interrupt pending and clear #define USB_INT_REG (*(volatile unsigned char *)0x52000158) //USB Interrupt pending and clear #define EP_INT_EN_REG (*(volatile unsigned char *)0x5200015c) //Interrupt enable #define USB_INT_EN_REG (*(volatile unsigned char *)0x5200016c) #define FRAME_NUM1_REG (*(volatile unsigned char *)0x52000170) //Frame number lower byte #define FRAME_NUM2_REG (*(volatile unsigned char *)0x52000174) //Frame number higher byte #define INDEX_REG (*(volatile unsigned char *)0x52000178) //Register index #define MAXP_REG (*(volatile unsigned char *)0x52000180) //Endpoint max packet #define EP0_CSR (*(volatile unsigned char *)0x52000184) //Endpoint 0 status #define IN_CSR1_REG (*(volatile unsigned char *)0x52000184) //In endpoint control status #define IN_CSR2_REG (*(volatile unsigned char *)0x52000188) #define OUT_CSR1_REG (*(volatile unsigned char *)0x52000190) //Out endpoint control status #define OUT_CSR2_REG (*(volatile unsigned char *)0x52000194) #define OUT_FIFO_CNT1_REG (*(volatile unsigned char *)0x52000198) //Endpoint out write count #define OUT_FIFO_CNT2_REG (*(volatile unsigned char *)0x5200019c) #define EP0_FIFO (*(volatile unsigned char *)0x520001c0) //Endpoint 0 FIFO #define EP1_FIFO (*(volatile unsigned char *)0x520001c4) //Endpoint 1 FIFO #define EP2_FIFO (*(volatile unsigned char *)0x520001c8) //Endpoint 2 FIFO #define EP3_FIFO (*(volatile unsigned char *)0x520001cc) //Endpoint 3 FIFO #define EP4_FIFO (*(volatile unsigned char *)0x520001d0) //Endpoint 4 FIFO #define EP1_DMA_CON (*(volatile unsigned char *)0x52000200) //EP1 DMA interface control #define EP1_DMA_UNIT (*(volatile unsigned char *)0x52000204) //EP1 DMA Tx unit counter #define EP1_DMA_FIFO (*(volatile unsigned char *)0x52000208) //EP1 DMA Tx FIFO counter #define EP1_DMA_TTC_L (*(volatile unsigned char *)0x5200020c) //EP1 DMA total Tx counter #define EP1_DMA_TTC_M (*(volatile unsigned char *)0x52000210) #define EP1_DMA_TTC_H (*(volatile unsigned char *)0x52000214) #define EP2_DMA_CON (*(volatile unsigned char *)0x52000218) //EP2 DMA interface control #define EP2_DMA_UNIT (*(volatile unsigned char *)0x5200021c) //EP2 DMA Tx unit counter #define EP2_DMA_FIFO (*(volatile unsigned char *)0x52000220) //EP2 DMA Tx FIFO counter #define EP2_DMA_TTC_L (*(volatile unsigned char *)0x52000224) //EP2 DMA total Tx counter #define EP2_DMA_TTC_M (*(volatile unsigned char *)0x52000228) #define EP2_DMA_TTC_H (*(volatile unsigned char *)0x5200022c) #define EP3_DMA_CON (*(volatile unsigned char *)0x52000240) //EP3 DMA interface control #define EP3_DMA_UNIT (*(volatile unsigned char *)0x52000244) //EP3 DMA Tx unit counter #define EP3_DMA_FIFO (*(volatile unsigned char *)0x52000248) //EP3 DMA Tx FIFO counter #define EP3_DMA_TTC_L (*(volatile unsigned char *)0x5200024c) //EP3 DMA total Tx counter #define EP3_DMA_TTC_M (*(volatile unsigned char *)0x52000250) #define EP3_DMA_TTC_H (*(volatile unsigned char *)0x52000254) #define EP4_DMA_CON (*(volatile unsigned char *)0x52000258) //EP4 DMA interface control #define EP4_DMA_UNIT (*(volatile unsigned char *)0x5200025c) //EP4 DMA Tx unit counter #define EP4_DMA_FIFO (*(volatile unsigned char *)0x52000260) //EP4 DMA Tx FIFO counter #define EP4_DMA_TTC_L (*(volatile unsigned char *)0x52000264) //EP4 DMA total Tx counter #define EP4_DMA_TTC_M (*(volatile unsigned char *)0x52000268) #define EP4_DMA_TTC_H (*(volatile unsigned char *)0x5200026c) #endif // __BIG_ENDIAN // WATCH DOG TIMER #define WTCON (*(volatile unsigned *)0x53000000) //Watch-dog timer mode #define WTDAT (*(volatile unsigned *)0x53000004) //Watch-dog timer data #define WTCNT (*(volatile unsigned *)0x53000008) //Eatch-dog timer count // IIC #define IICCON (*(volatile unsigned *)0x54000000) //IIC control #define IICSTAT (*(volatile unsigned *)0x54000004) //IIC status #define IICADD (*(volatile unsigned *)0x54000008) //IIC address #define IICDS (*(volatile unsigned *)0x5400000c) //IIC data shift // IIS #define IISCON (*(volatile unsigned *)0x55000000) //IIS Control #define IISMOD (*(volatile unsigned *)0x55000004) //IIS Mode #define IISPSR (*(volatile unsigned *)0x55000008) //IIS Prescaler #define IISFCON (*(volatile unsigned *)0x5500000c) //IIS FIFO control #ifdef __BIG_ENDIAN #define IISFIFO ((volatile unsigned short *)0x55000012) //IIS FIFO entry #else //Little Endian #define IISFIFO ((volatile unsigned short *)0x55000010) //IIS FIFO entry #endif // I/O PORT #define GPACON (*(volatile unsigned *)0x56000000) //Port A control #define GPADAT (*(volatile unsigned *)0x56000004) //Port A data #define GPBCON (*(volatile unsigned *)0x56000010) //Port B control #define GPBDAT (*(volatile unsigned *)0x56000014) //Port B data #define GPBUP (*(volatile unsigned *)0x56000018) //Pull-up control B #define GPCCON (*(volatile unsigned *)0x56000020) //Port C control #define GPCDAT (*(volatile unsigned *)0x56000024) //Port C data #define GPCUP (*(volatile unsigned *)0x56000028) //Pull-up control C #define GPDCON (*(volatile unsigned *)0x56000030) //Port D control #define GPDDAT (*(volatile unsigned *)0x56000034) //Port D data #define GPDUP (*(volatile unsigned *)0x56000038) //Pull-up control D #define GPECON (*(volatile unsigned *)0x56000040) //Port E control #define GPEDAT (*(volatile unsigned *)0x56000044) //Port E data #define GPEUP (*(volatile unsigned *)0x56000048) //Pull-up control E #define GPFCON (*(volatile unsigned *)0x56000050) //Port F control #define GPFDAT (*(volatile unsigned *)0x56000054) //Port F data #define GPFUP (*(volatile unsigned *)0x56000058) //Pull-up control F #define GPGCON (*(volatile unsigned *)0x56000060) //Port G control #define GPGDAT (*(volatile unsigned *)0x56000064) //Port G data #define GPGUP (*(volatile unsigned *)0x56000068) //Pull-up control G #define GPHCON (*(volatile unsigned *)0x56000070) //Port H control #define GPHDAT (*(volatile unsigned *)0x56000074) //Port H data #define GPHUP (*(volatile unsigned *)0x56000078) //Pull-up control H #define GPJCON (*(volatile unsigned *)0x560000d0) //Port J control #define GPJDAT (*(volatile unsigned *)0x560000d4) //Port J data #define GPJUP (*(volatile unsigned *)0x560000d8) //Pull-up control J #define MISCCR (*(volatile unsigned *)0x56000080) //Miscellaneous control #define DCLKCON (*(volatile unsigned *)0x56000084) //DCLK0/1 control #define EXTINT0 (*(volatile unsigned *)0x56000088) //External interrupt control egister 0 #define EXTINT1 (*(volatile unsigned *)0x5600008c) //External interrupt control egister 1 #define EXTINT2 (*(volatile unsigned *)0x56000090) //External interrupt control egister 2 #define EINTFLT0 (*(volatile unsigned *)0x56000094) //Reserved #define EINTFLT1 (*(volatile unsigned *)0x56000098) //Reserved #define EINTFLT2 (*(volatile unsigned *)0x5600009c) //External interrupt filter control egister 2 #define EINTFLT3 (*(volatile unsigned *)0x560000a0) //External interrupt filter control egister 3 #define EINTMASK (*(volatile unsigned *)0x560000a4) //External interrupt mask #define EINTPEND (*(volatile unsigned *)0x560000a8) //External interrupt pending #define GSTATUS0 (*(volatile unsigned *)0x560000ac) //External pin status #define GSTATUS1 (*(volatile unsigned *)0x560000b0) //Chip ID(0x32410000) #define GSTATUS2 (*(volatile unsigned *)0x560000b4) //Reset type #define GSTATUS3 (*(volatile unsigned *)0x560000b8) //Saved data0(32-bit) before entering POWER_OFF mode #define GSTATUS4 (*(volatile unsigned *)0x560000bc) //Saved data0(32-bit) before entering POWER_OFF mode // RTC #ifdef __BIG_ENDIAN #define RTCCON (*(volatile unsigned char *)0x57000043) //RTC control #define TICNT (*(volatile unsigned char *)0x57000047) //Tick time count #define RTCALM (*(volatile unsigned char *)0x57000053) //RTC alarm control #define ALMSEC (*(volatile unsigned char *)0x57000057) //Alarm second #define ALMMIN (*(volatile unsigned char *)0x5700005b) //Alarm minute #define ALMHOUR (*(volatile unsigned char *)0x5700005f) //Alarm Hour #define ALMDATE (*(volatile unsigned char *)0x57000063) //Alarm day <-- May 06, 2002 SOP #define ALMMON (*(volatile unsigned char *)0x57000067) //Alarm month #define ALMYEAR (*(volatile unsigned char *)0x5700006b) //Alarm year #define RTCRST (*(volatile unsigned char *)0x5700006f) //RTC ound eset #define BCDSEC (*(volatile unsigned char *)0x57000073) //BCD second #define BCDMIN (*(volatile unsigned char *)0x57000077) //BCD minute #define BCDHOUR (*(volatile unsigned char *)0x5700007b) //BCD hour #define BCDDATE (*(volatile unsigned char *)0x5700007f) //BCD day <-- May 06, 2002 SOP #define BCDDAY (*(volatile unsigned char *)0x57000083) //BCD date <-- May 06, 2002 SOP #define BCDMON (*(volatile unsigned char *)0x57000087) //BCD month #define BCDYEAR (*(volatile unsigned char *)0x5700008b) //BCD year #else //Little Endian #define RTCCON (*(volatile unsigned char *)0x57000040) //RTC control #define TICNT (*(volatile unsigned char *)0x57000044) //Tick time count #define RTCALM (*(volatile unsigned char *)0x57000050) //RTC alarm control #define ALMSEC (*(volatile unsigned char *)0x57000054) //Alarm second #define ALMMIN (*(volatile unsigned char *)0x57000058) //Alarm minute #define ALMHOUR (*(volatile unsigned char *)0x5700005c) //Alarm Hour #define ALMDATE (*(volatile unsigned char *)0x57000060) //Alarm day <-- May 06, 2002 SOP #define ALMMON (*(volatile unsigned char *)0x57000064) //Alarm month #define ALMYEAR (*(volatile unsigned char *)0x57000068) //Alarm year #define RTCRST (*(volatile unsigned char *)0x5700006c) //RTC ound eset #define BCDSEC (*(volatile unsigned char *)0x57000070) //BCD second #define BCDMIN (*(volatile unsigned char *)0x57000074) //BCD minute #define BCDHOUR (*(volatile unsigned char *)0x57000078) //BCD hour #define BCDDATE (*(volatile unsigned char *)0x5700007c) //BCD day <-- May 06, 2002 SOP #define BCDDAY (*(volatile unsigned char *)0x57000080) //BCD date <-- May 06, 2002 SOP #define BCDMON (*(volatile unsigned char *)0x57000084) //BCD month #define BCDYEAR (*(volatile unsigned char *)0x57000088) //BCD year #endif //RTC // ADC #define ADCCON (*(volatile unsigned *)0x58000000) //ADC control #define ADCTSC (*(volatile unsigned *)0x58000004) //ADC touch screen control #define ADCDLY (*(volatile unsigned *)0x58000008) //ADC start or Interval Delay #define ADCDAT0 (*(volatile unsigned *)0x5800000c) //ADC conversion data 0 #define ADCDAT1 (*(volatile unsigned *)0x58000010) //ADC conversion data 1 // SPI #define SPCON0 (*(volatile unsigned *)0x59000000) //SPI0 control #define SPSTA0 (*(volatile unsigned *)0x59000004) //SPI0 status #define SPPIN0 (*(volatile unsigned *)0x59000008) //SPI0 pin control #define SPPRE0 (*(volatile unsigned *)0x5900000c) //SPI0 baud ate prescaler #define SPTDAT0 (*(volatile unsigned *)0x59000010) //SPI0 Tx data #define SPRDAT0 (*(volatile unsigned *)0x59000014) //SPI0 Rx data #define SPCON1 (*(volatile unsigned *)0x59000020) //SPI1 control #define SPSTA1 (*(volatile unsigned *)0x59000024) //SPI1 status #define SPPIN1 (*(volatile unsigned *)0x59000028) //SPI1 pin control #define SPPRE1 (*(volatile unsigned *)0x5900002c) //SPI1 baud ate prescaler #define SPTDAT1 (*(volatile unsigned *)0x59000030) //SPI1 Tx data #define SPRDAT1 (*(volatile unsigned *)0x59000034) //SPI1 Rx data // SD Interface #define SDICON (*(volatile unsigned *)0x5a000000) //SDI control #define SDIPRE (*(volatile unsigned *)0x5a000004) //SDI baud ate prescaler #define SDICARG (*(volatile unsigned *)0x5a000008) //SDI command argument #define SDICCON (*(volatile unsigned *)0x5a00000c) //SDI command control #define SDICSTA (*(volatile unsigned *)0x5a000010) //SDI command status #define SDIRSP0 (*(volatile unsigned *)0x5a000014) //SDI esponse 0 #define SDIRSP1 (*(volatile unsigned *)0x5a000018) //SDI esponse 1 #define SDIRSP2 (*(volatile unsigned *)0x5a00001c) //SDI esponse 2 #define SDIRSP3 (*(volatile unsigned *)0x5a000020) //SDI esponse 3 #define SDIDTIMER (*(volatile unsigned *)0x5a000024) //SDI data/busy timer #define SDIBSIZE (*(volatile unsigned *)0x5a000028) //SDI block size #define SDIDCON (*(volatile unsigned *)0x5a00002c) //SDI data control #define SDIDCNT (*(volatile unsigned *)0x5a000030) //SDI data emain counter #define SDIDSTA (*(volatile unsigned *)0x5a000034) //SDI data status #define SDIFSTA (*(volatile unsigned *)0x5a000038) //SDI FIFO status #define SDIIMSK (*(volatile unsigned *)0x5a000040) //SDI interrupt mask #ifdef __BIG_ENDIAN /* edited for 2440A */ #define SDIDAT (*(volatile unsigned *)0x5a00004c) #else // Little Endian #define SDIDAT (*(volatile unsigned *)0x5a000040) #endif //SD Interface // PENDING BIT #define INTEINT0 (0) #define INTEINT1 (1) #define INTEINT2 (2) #define INTEINT3 (3) #define INTEINT4_7 (4) #define INTEINT8_23 (5) #define INTNOTUSED6 (6) #define INTBAT_FLT (7) #define INTTICK (8) #define INTWDT (9) #define INTTIMER0 (10) #define INTTIMER1 (11) #define INTTIMER2 (12) #define INTTIMER3 (13) #define INTTIMER4 (14) #define INTUART2 (15) #define INTLCD (16) #define INTDMA0 (17) #define INTDMA1 (18) #define INTDMA2 (19) #define INTDMA3 (20) #define INTSDI (21) #define INTSPI0 (22) #define INTUART1 (23) //#define INTNOTUSED24 (24) #define INTNIC (24) #define INTUSBD (25) #define INTUSBH (26) #define INTIIC (27) #define INTUART0 (28) #define INTSPI1 (29) #define INTRTC (30) #define INTADC (31) #define BIT_ALLMSK (0xffffffff) #define BIT_SUB_ALLMSK (0x7ff) #define INTSUB_ADC (10) #define INTSUB_TC (9) #define INTSUB_ERR2 (8) #define INTSUB_TXD2 (7) #define INTSUB_RXD2 (6) #define INTSUB_ERR1 (5) #define INTSUB_TXD1 (4) #define INTSUB_RXD1 (3) #define INTSUB_ERR0 (2) #define INTSUB_TXD0 (1) #define INTSUB_RXD0 (0) #define BIT_SUB_ADC (0x1<<10) #define BIT_SUB_TC (0x1<<9) #define BIT_SUB_ERR2 (0x1<<8) #define BIT_SUB_TXD2 (0x1<<7) #define BIT_SUB_RXD2 (0x1<<6) #define BIT_SUB_ERR1 (0x1<<5) #define BIT_SUB_TXD1 (0x1<<4) #define BIT_SUB_RXD1 (0x1<<3) #define BIT_SUB_ERR0 (0x1<<2) #define BIT_SUB_TXD0 (0x1<<1) #define BIT_SUB_RXD0 (0x1<<0) #define ClearPending(bit) {SRCPND = bit;INTPND = bit;INTPND;} //Wait until INTPND is changed for the case that the ISR is very short. #define INTGLOBAL 32 /*****************************/ /* CPU Mode */ /*****************************/ #define USERMODE 0x10 #define FIQMODE 0x11 #define IRQMODE 0x12 #define SVCMODE 0x13 #define ABORTMODE 0x17 #define UNDEFMODE 0x1b #define MODEMASK 0x1f #define NOINT 0xc0 struct rt_hw_register { rt_uint32_t r0; rt_uint32_t r1; rt_uint32_t r2; rt_uint32_t r3; rt_uint32_t r4; rt_uint32_t r5; rt_uint32_t r6; rt_uint32_t r7; rt_uint32_t r8; rt_uint32_t r9; rt_uint32_t r10; rt_uint32_t fp; rt_uint32_t ip; rt_uint32_t sp; rt_uint32_t lr; rt_uint32_t pc; rt_uint32_t cpsr; rt_uint32_t ORIG_r0; }; #ifdef __cplusplus } #endif /*@}*/ #endif