/* * Copyright (c) 2006-2018, RT-Thread Development Team * * SPDX-License-Identifier: Apache-2.0 * * Change Logs: * Date Author Notes * 2018-12-05 zylx The first version for STM32F4xx * 2019-4-25 misonyo port to IMXRT */ #ifndef __DRV_WM8960_H__ #define __DRV_WM8960_H__ #include #include #include "fsl_common.h" /*! * @addtogroup wm8960 * @{ */ /******************************************************************************* * Definitions ******************************************************************************/ /*! @name Driver version */ /*@{*/ /*! @brief CLOCK driver version 2.1.0 */ #define FSL_WM8960_DRIVER_VERSION (MAKE_VERSION(2, 1, 0)) /*@}*/ /*! @brief wm8960 handle size */ #ifndef WM8960_HANDLE_SIZE #define WM8960_HANDLE_SIZE (100U) #endif /*! @brief Define the register address of WM8960. */ #define WM8960_LINVOL 0x0 #define WM8960_RINVOL 0x1 #define WM8960_LOUT1 0x2 #define WM8960_ROUT1 0x3 #define WM8960_CLOCK1 0x4 #define WM8960_DACCTL1 0x5 #define WM8960_DACCTL2 0x6 #define WM8960_IFACE1 0x7 #define WM8960_CLOCK2 0x8 #define WM8960_IFACE2 0x9 #define WM8960_LDAC 0xa #define WM8960_RDAC 0xb #define WM8960_RESET 0xf #define WM8960_3D 0x10 #define WM8960_ALC1 0x11 #define WM8960_ALC2 0x12 #define WM8960_ALC3 0x13 #define WM8960_NOISEG 0x14 #define WM8960_LADC 0x15 #define WM8960_RADC 0x16 #define WM8960_ADDCTL1 0x17 #define WM8960_ADDCTL2 0x18 #define WM8960_POWER1 0x19 #define WM8960_POWER2 0x1a #define WM8960_ADDCTL3 0x1b #define WM8960_APOP1 0x1c #define WM8960_APOP2 0x1d #define WM8960_LINPATH 0x20 #define WM8960_RINPATH 0x21 #define WM8960_LOUTMIX 0x22 #define WM8960_ROUTMIX 0x25 #define WM8960_MONOMIX1 0x26 #define WM8960_MONOMIX2 0x27 #define WM8960_LOUT2 0x28 #define WM8960_ROUT2 0x29 #define WM8960_MONO 0x2a #define WM8960_INBMIX1 0x2b #define WM8960_INBMIX2 0x2c #define WM8960_BYPASS1 0x2d #define WM8960_BYPASS2 0x2e #define WM8960_POWER3 0x2f #define WM8960_ADDCTL4 0x30 #define WM8960_CLASSD1 0x31 #define WM8960_CLASSD3 0x33 #define WM8960_PLL1 0x34 #define WM8960_PLL2 0x35 #define WM8960_PLL3 0x36 #define WM8960_PLL4 0x37 /*! @brief Cache register number */ #define WM8960_CACHEREGNUM 56 /*! @brief WM8960_IFACE1 FORMAT bits */ #define WM8960_IFACE1_FORMAT_MASK 0x03 #define WM8960_IFACE1_FORMAT_SHIFT 0x00 #define WM8960_IFACE1_FORMAT_RJ 0x00 #define WM8960_IFACE1_FORMAT_LJ 0x01 #define WM8960_IFACE1_FORMAT_I2S 0x02 #define WM8960_IFACE1_FORMAT_DSP 0x03 #define WM8960_IFACE1_FORMAT(x) ((x << WM8960_IFACE1_FORMAT_SHIFT) & WM8960_IFACE1_FORMAT_MASK) /*! @brief WM8960_IFACE1 WL bits */ #define WM8960_IFACE1_WL_MASK 0x0C #define WM8960_IFACE1_WL_SHIFT 0x02 #define WM8960_IFACE1_WL_16BITS 0x00 #define WM8960_IFACE1_WL_20BITS 0x01 #define WM8960_IFACE1_WL_24BITS 0x02 #define WM8960_IFACE1_WL_32BITS 0x03 #define WM8960_IFACE1_WL(x) ((x << WM8960_IFACE1_WL_SHIFT) & WM8960_IFACE1_WL_MASK) /*! @brief WM8960_IFACE1 LRP bit */ #define WM8960_IFACE1_LRP_MASK 0x10 #define WM8960_IFACE1_LRP_SHIFT 0x04 #define WM8960_IFACE1_LRCLK_NORMAL_POL 0x00 #define WM8960_IFACE1_LRCLK_INVERT_POL 0x01 #define WM8960_IFACE1_DSP_MODEA 0x00 #define WM8960_IFACE1_DSP_MODEB 0x01 #define WM8960_IFACE1_LRP(x) ((x << WM8960_IFACE1_LRP_SHIFT) & WM8960_IFACE1_LRP_MASK) /*! @brief WM8960_IFACE1 DLRSWAP bit */ #define WM8960_IFACE1_DLRSWAP_MASK 0x20 #define WM8960_IFACE1_DLRSWAP_SHIFT 0x05 #define WM8960_IFACE1_DACCH_NORMAL 0x00 #define WM8960_IFACE1_DACCH_SWAP 0x01 #define WM8960_IFACE1_DLRSWAP(x) ((x << WM8960_IFACE1_DLRSWAP_SHIFT) & WM8960_IFACE1_DLRSWAP_MASK) /*! @brief WM8960_IFACE1 MS bit */ #define WM8960_IFACE1_MS_MASK 0x40 #define WM8960_IFACE1_MS_SHIFT 0x06 #define WM8960_IFACE1_SLAVE 0x00 #define WM8960_IFACE1_MASTER 0x01 #define WM8960_IFACE1_MS(x) ((x << WM8960_IFACE1_MS_SHIFT) & WM8960_IFACE1_MS_MASK) /*! @brief WM8960_IFACE1 BCLKINV bit */ #define WM8960_IFACE1_BCLKINV_MASK 0x80 #define WM8960_IFACE1_BCLKINV_SHIFT 0x07 #define WM8960_IFACE1_BCLK_NONINVERT 0x00 #define WM8960_IFACE1_BCLK_INVERT 0x01 #define WM8960_IFACE1_BCLKINV(x) ((x << WM8960_IFACE1_BCLKINV_SHIFT) & WM8960_IFACE1_BCLKINV_MASK) /*! @brief WM8960_IFACE1 ALRSWAP bit */ #define WM8960_IFACE1_ALRSWAP_MASK 0x100 #define WM8960_IFACE1_ALRSWAP_SHIFT 0x08 #define WM8960_IFACE1_ADCCH_NORMAL 0x00 #define WM8960_IFACE1_ADCCH_SWAP 0x01 #define WM8960_IFACE1_ALRSWAP(x) ((x << WM8960_IFACE1_ALRSWAP_SHIFT) & WM8960_IFACE1_ALRSWAP_MASK) /*! @brief WM8960_POWER1 */ #define WM8960_POWER1_VREF_MASK 0x40 #define WM8960_POWER1_VREF_SHIFT 0x06 #define WM8960_POWER1_AINL_MASK 0x20 #define WM8960_POWER1_AINL_SHIFT 0x05 #define WM8960_POWER1_AINR_MASK 0x10 #define WM8960_POWER1_AINR_SHIFT 0x04 #define WM8960_POWER1_ADCL_MASK 0x08 #define WM8960_POWER1_ADCL_SHIFT 0x03 #define WM8960_POWER1_ADCR_MASK 0x0 #define WM8960_POWER1_ADCR_SHIFT 0x02 #define WM8960_POWER1_MICB_MASK 0x02 #define WM8960_POWER1_MICB_SHIFT 0x01 #define WM8960_POWER1_DIGENB_MASK 0x01 #define WM8960_POWER1_DIGENB_SHIFT 0x00 /*! @brief WM8960_POWER2 */ #define WM8960_POWER2_DACL_MASK 0x100 #define WM8960_POWER2_DACL_SHIFT 0x08 #define WM8960_POWER2_DACR_MASK 0x80 #define WM8960_POWER2_DACR_SHIFT 0x07 #define WM8960_POWER2_LOUT1_MASK 0x40 #define WM8960_POWER2_LOUT1_SHIFT 0x06 #define WM8960_POWER2_ROUT1_MASK 0x20 #define WM8960_POWER2_ROUT1_SHIFT 0x05 #define WM8960_POWER2_SPKL_MASK 0x10 #define WM8960_POWER2_SPKL_SHIFT 0x04 #define WM8960_POWER2_SPKR_MASK 0x08 #define WM8960_POWER2_SPKR_SHIFT 0x03 #define WM8960_POWER3_LMIC_MASK 0x20 #define WM8960_POWER3_LMIC_SHIFT 0x05 #define WM8960_POWER3_RMIC_MASK 0x10 #define WM8960_POWER3_RMIC_SHIFT 0x04 #define WM8960_POWER3_LOMIX_MASK 0x08 #define WM8960_POWER3_LOMIX_SHIFT 0x03 #define WM8960_POWER3_ROMIX_MASK 0x04 #define WM8960_POWER3_ROMIX_SHIFT 0x02 /*! @brief WM8960 I2C address. */ #define WM8960_I2C_ADDR 0x1A /*! @brief WM8960 I2C baudrate */ #define WM8960_I2C_BAUDRATE (100000U) /*! @brief Modules in WM8960 board. */ typedef enum _wm8960_module { kWM8960_ModuleADC = 0, /*!< ADC module in WM8960 */ kWM8960_ModuleDAC = 1, /*!< DAC module in WM8960 */ kWM8960_ModuleVREF = 2, /*!< VREF module */ kWM8960_ModuleHP = 3, /*!< Headphone */ kWM8960_ModuleMICB = 4, /*!< Mic bias */ kWM8960_ModuleMIC = 5, /*!< Input Mic */ kWM8960_ModuleLineIn = 6, /*!< Analog in PGA */ kWM8960_ModuleLineOut = 7, /*!< Line out module */ kWM8960_ModuleSpeaker = 8, /*!< Speaker module */ kWM8960_ModuleOMIX = 9, /*!< Output mixer */ } wm8960_module_t; /*! @brief wm8960 play channel */ enum _wm8960_play_channel { kWM8960_HeadphoneLeft = 1, /*!< wm8960 headphone left channel */ kWM8960_HeadphoneRight = 2, /*!< wm8960 headphone right channel */ kWM8960_SpeakerLeft = 4, /*!< wm8960 speaker left channel */ kWM8960_SpeakerRight = 8, /*!< wm8960 speaker right channel */ }; /*! @brief wm8960 play source */ typedef enum _wm8960_play_source { kWM8960_PlaySourcePGA = 1, /*!< wm8960 play source PGA */ kWM8960_PlaySourceInput = 2, /*!< wm8960 play source Input */ kWM8960_PlaySourceDAC = 4, /*!< wm8960 play source DAC */ } wm8960_play_source_t; /*! * @brief WM8960 data route. * Only provide some typical data route, not all route listed. * Note: Users cannot combine any routes, once a new route is set, the previous one would be replaced. */ typedef enum _wm8960_route { kWM8960_RouteBypass = 0, /*!< LINEIN->Headphone. */ kWM8960_RoutePlayback = 1, /*!< I2SIN->DAC->Headphone. */ kWM8960_RoutePlaybackandRecord = 2, /*!< I2SIN->DAC->Headphone, LINEIN->ADC->I2SOUT. */ kWM8960_RouteRecord = 5 /*!< LINEIN->ADC->I2SOUT. */ } wm8960_route_t; /*! * @brief The audio data transfer protocol choice. * WM8960 only supports I2S format and PCM format. */ typedef enum _wm8960_protocol { kWM8960_BusI2S = 2, /*!< I2S type */ kWM8960_BusLeftJustified = 1, /*!< Left justified mode */ kWM8960_BusRightJustified = 0, /*!< Right justified mode */ kWM8960_BusPCMA = 3, /*!< PCM A mode */ kWM8960_BusPCMB = 3 | (1 << 4) /*!< PCM B mode */ } wm8960_protocol_t; /*! @brief wm8960 input source */ typedef enum _wm8960_input { kWM8960_InputClosed = 0, /*!< Input device is closed */ kWM8960_InputSingleEndedMic = 1, /*!< Input as single ended mic, only use L/RINPUT1 */ kWM8960_InputDifferentialMicInput2 = 2, /*!< Input as differential mic, use L/RINPUT1 and L/RINPUT2 */ kWM8960_InputDifferentialMicInput3 = 3, /*!< Input as differential mic, use L/RINPUT1 and L/RINPUT3*/ kWM8960_InputLineINPUT2 = 4, /*!< Input as line input, only use L/RINPUT2 */ kWM8960_InputLineINPUT3 = 5 /*!< Input as line input, only use L/RINPUT3 */ } wm8960_input_t; /*! @brief audio sample rate definition */ enum _wm8960_sample_rate { kWM8960_AudioSampleRate8KHz = 8000U, /*!< Sample rate 8000 Hz */ kWM8960_AudioSampleRate11025Hz = 11025U, /*!< Sample rate 11025 Hz */ kWM8960_AudioSampleRate12KHz = 12000U, /*!< Sample rate 12000 Hz */ kWM8960_AudioSampleRate16KHz = 16000U, /*!< Sample rate 16000 Hz */ kWM8960_AudioSampleRate22050Hz = 22050U, /*!< Sample rate 22050 Hz */ kWM8960_AudioSampleRate24KHz = 24000U, /*!< Sample rate 24000 Hz */ kWM8960_AudioSampleRate32KHz = 32000U, /*!< Sample rate 32000 Hz */ kWM8960_AudioSampleRate44100Hz = 44100U, /*!< Sample rate 44100 Hz */ kWM8960_AudioSampleRate48KHz = 48000U, /*!< Sample rate 48000 Hz */ kWM8960_AudioSampleRate96KHz = 96000U, /*!< Sample rate 96000 Hz */ kWM8960_AudioSampleRate192KHz = 192000U, /*!< Sample rate 192000 Hz */ kWM8960_AudioSampleRate384KHz = 384000U, /*!< Sample rate 384000 Hz */ }; /*! @brief audio bit width */ enum _wm8960_audio_bit_width { kWM8960_AudioBitWidth16bit = 16U, /*!< audio bit width 16 */ kWM8960_AudioBitWidth20bit = 20U, /*!< audio bit width 20 */ kWM8960_AudioBitWidth24bit = 24U, /*!< audio bit width 24 */ kWM8960_AudioBitWidth32bit = 32U, /*!< audio bit width 32 */ }; /*! @brief wm8960 audio format */ typedef struct _wm8960_audio_format { uint32_t mclk_HZ; /*!< master clock frequency */ uint32_t sampleRate; /*!< sample rate */ uint32_t bitWidth; /*!< bit width */ } wm8960_audio_format_t; /*! @brief Initialize structure of WM8960 */ typedef struct wm8960_config { wm8960_route_t route; /*!< Audio data route.*/ wm8960_protocol_t bus; /*!< Audio transfer protocol */ wm8960_audio_format_t format; /*!< Audio format */ rt_bool_t master_slave; /*!< Master or slave. */ rt_bool_t enableSpeaker; /*!< True means enable class D speaker as output, false means no */ wm8960_input_t leftInputSource; /*!< Left input source for WM8960 */ wm8960_input_t rightInputSource; /*!< Right input source for wm8960 */ wm8960_play_source_t playSource; /*!< play source */ uint8_t slaveAddress; /*!< wm8960 device address */ //codec_i2c_config_t i2cConfig; /*!< i2c configuration */ } wm8960_config_t; /*! @brief wm8960 codec handler * Applicationi should allocate a buffer with WM8960_HANDLE_SIZE for handle definition, such as * uint8_t wm8960HandleBuffer[WM8960_HANDLE_SIZE]; * wm8904_handle_t *wm8904Handle = wm8960HandleBuffer; */ typedef struct _wm8960_handle { const wm8960_config_t *config; /*!< wm8904 config pointer */ void *i2cHandle; /*!< i2c handle */ } wm8960_handle_t; /******************************************************************************* * API ******************************************************************************/ #if defined(__cplusplus) extern "C" { #endif /*! * @brief WM8960 initialize function. * * The second parameter is NULL to WM8960 in this version. If users want * to change the settings, they have to use wm8960_write_reg() or wm8960_modify_reg() * to set the register value of WM8960. * Note: If the codec_config is NULL, it would initialize WM8960 using default settings. * The default setting: * codec_config->route = kWM8960_RoutePlaybackandRecord * codec_config->bus = kWM8960_BusI2S * codec_config->master = slave * * @param handle WM8960 handle structure. * @param wm8960Config WM8960 configuration structure. */ void WM8960_init(struct rt_i2c_bus_device *dev, wm8960_config_t *wm8960Config); /*! * @brief Deinit the WM8960 codec. * * This function close all modules in WM8960 to save power. * * @param handle WM8960 handle structure pointer. */ void WM8960_Deinit(struct rt_i2c_bus_device *dev); /*! * @brief Set audio data route in WM8960. * * This function would set the data route according to route. The route cannot be combined, * as all route would enable different modules. * Note: If a new route is set, the previous route would not work. * * @param handle WM8960 handle structure. * @param route Audio data route in WM8960. */ void WM8960_SetDataRoute(struct rt_i2c_bus_device *dev, wm8960_route_t route); /*! * @brief Set left audio input source in WM8960. * * @param handle WM8960 handle structure. * @param input Audio input source. */ void WM8960_SetLeftInput(struct rt_i2c_bus_device *dev, wm8960_input_t input); /*! * @brief Set right audio input source in WM8960. * * @param handle WM8960 handle structure. * @param input Audio input source. */ void WM8960_SetRightInput(struct rt_i2c_bus_device *dev, wm8960_input_t input); /*! * @brief Set the audio transfer protocol. * * WM8960 only supports I2S, left justified, right justified, PCM A, PCM B format. * * @param handle WM8960 handle structure. * @param bus Audio data transfer protocol. */ void WM8960_SetProtocol(struct rt_i2c_bus_device *dev, wm8960_protocol_t protocol); /*! * @brief Set WM8960 as master or slave. * * @param handle WM8960 handle structure. * @param master 1 represent master, 0 represent slave. */ void WM8960_SetMasterSlave(struct rt_i2c_bus_device *dev, rt_bool_t master); /*! * @brief Set the volume of different modules in WM8960. * * This function would set the volume of WM8960 modules. Uses need to appoint the module. * The function assume that left channel and right channel has the same volume. * * @param handle WM8960 handle structure. * @param module Module to set volume, it can be ADC, DAC, Headphone and so on. * @param volume Volume value need to be set. */ void WM8960_SetVolume(struct rt_i2c_bus_device *dev, wm8960_module_t module, rt_uint32_t volume); /*! * @brief Get the volume of different modules in WM8960. * * This function gets the volume of WM8960 modules. Uses need to appoint the module. * The function assume that left channel and right channel has the same volume. * * @param handle WM8960 handle structure. * @param module Module to set volume, it can be ADC, DAC, Headphone and so on. * @return Volume value of the module. */ rt_uint32_t WM8960_GetVolume(struct rt_i2c_bus_device *dev, wm8960_module_t module); /*! * @brief Mute modules in WM8960. * * @param handle WM8960 handle structure. * @param module Modules need to be mute. * @param isEnabled Mute or unmute, 1 represent mute. */ void WM8960_SetMute(struct rt_i2c_bus_device *dev, wm8960_module_t module, rt_bool_t isEnabled); /*! * @brief Enable/disable expected devices. * * @param handle WM8960 handle structure. * @param module Module expected to enable. * @param isEnabled Enable or disable moudles. */ void WM8960_SetModule(struct rt_i2c_bus_device *dev, wm8960_module_t module, rt_bool_t isEnabled); /*! * @brief SET the WM8960 play source. * * @param handle WM8960 handle structure. * @param playSource play source , can be a value combine of kWM8960_ModuleHeadphoneSourcePGA, * kWM8960_ModuleHeadphoneSourceDAC, kWM8960_ModulePlaySourceInput, kWM8960_ModulePlayMonoRight, * kWM8960_ModulePlayMonoLeft. * * @return kStatus_WM8904_Success if successful, different code otherwise.. */ void WM8960_SetPlay(struct rt_i2c_bus_device *dev, uint32_t playSource); /*! * @brief Configure the data format of audio data. * * This function would configure the registers about the sample rate, bit depths. * * @param handle WM8960 handle structure pointer. * @param sysclk system clock of the codec which can be generated by MCLK or PLL output. * @param sample_rate Sample rate of audio file running in WM8960. WM8960 now * supports 8k, 11.025k, 12k, 16k, 22.05k, 24k, 32k, 44.1k, 48k and 96k sample rate. * @param bits Bit depth of audio file (WM8960 only supports 16bit, 20bit, 24bit * and 32 bit in HW). */ void WM8960_ConfigDataFormat(struct rt_i2c_bus_device *dev, uint32_t sysclk, rt_uint32_t sample_rate, rt_uint32_t bits); /*! * @brief Enable/disable jack detect feature. * * @param handle WM8960 handle structure. * @param isEnabled Enable or disable moudles. */ void WM8960_SetJackDetect(struct rt_i2c_bus_device *dev, rt_bool_t isEnabled); /*! * @brief Write register to WM8960 using I2C. * * @param handle WM8960 handle structure. * @param reg The register address in WM8960. * @param val Value needs to write into the register. */ void wm8960_write_reg(struct rt_i2c_bus_device *dev, rt_uint8_t reg, rt_uint16_t val); /*! * @brief Read register from WM8960 using I2C. * @param handle WM8960 handle structure. * @param reg The register address in WM8960. * @param val Value written to. */ void wm8960_read_reg(struct rt_i2c_bus_device *dev, rt_uint8_t reg, rt_uint16_t *val); /*! * @brief Modify some bits in the register using I2C. * @param handle WM8960 handle structure. * @param reg The register address in WM8960. * @param mask The mask code for the bits want to write. The bit you want to write should be 0. * @param val Value needs to write into the register. */ void wm8960_modify_reg(struct rt_i2c_bus_device *dev, rt_uint8_t reg, rt_uint16_t mask, rt_uint16_t val); #if defined(__cplusplus) } #endif /*! @} */ #endif /* _FSL_WM8960_H_ */ /******************************************************************************* * API ******************************************************************************/