diff --git a/bsp/stm32/stm32f072-st-nucleo/applications/arduino_main.cpp b/bsp/stm32/stm32f072-st-nucleo/applications/arduino_main.cpp index 873d6b76767a6d7a43e5ea0b66cdaa744d51825f..bf0431f83df231fc0a328ae809f20e4e6cb9fae4 100644 --- a/bsp/stm32/stm32f072-st-nucleo/applications/arduino_main.cpp +++ b/bsp/stm32/stm32f072-st-nucleo/applications/arduino_main.cpp @@ -10,17 +10,14 @@ #include -uint8_t led = LED_BUILTIN; - void setup(void) { /* put your setup code here, to run once: */ - pinMode(led, OUTPUT); } void loop(void) { /* put your main code here, to run repeatedly: */ - digitalWrite(led, !digitalRead(led)); - delay(100); + Serial.println("Hello Arduino!\n"); + delay(800); } diff --git a/bsp/stm32/stm32f072-st-nucleo/applications/arduino_pinout/pins_arduino.h b/bsp/stm32/stm32f072-st-nucleo/applications/arduino_pinout/pins_arduino.h index 22bea30288a930e4ec32220088dc73262a76457e..f64182b61bc432f2bed920de245b07b9ad0eac88 100644 --- a/bsp/stm32/stm32f072-st-nucleo/applications/arduino_pinout/pins_arduino.h +++ b/bsp/stm32/stm32f072-st-nucleo/applications/arduino_pinout/pins_arduino.h @@ -42,6 +42,5 @@ #define LED_BUILTIN D13 /* Default Built-in LED */ #define RTDUINO_DEFAULT_IIC_BUS_NAME "i2c1" -#define RTDUINO_DEFAULT_HWTIMER_DEVICE_NAME "timer7" #endif /* Pins_Arduino_h */ diff --git a/bsp/stm32/stm32f072-st-nucleo/board/Kconfig b/bsp/stm32/stm32f072-st-nucleo/board/Kconfig index 11043796b01009e43043d66baa68eddb02b994ac..fb9f45216ccbf763301a8c5e9e0617e1a6745e67 100644 --- a/bsp/stm32/stm32f072-st-nucleo/board/Kconfig +++ b/bsp/stm32/stm32f072-st-nucleo/board/Kconfig @@ -19,8 +19,6 @@ menu "Onboard Peripheral Drivers" select PKG_USING_RTDUINO select BSP_USING_STLINK_TO_USART select BSP_USING_GPIO - select BSP_USING_TIM - select BSP_USING_TIM7 select BSP_USING_ADC select BSP_USING_ADC1 select BSP_USING_PWM diff --git a/bsp/stm32/stm32f401-st-nucleo/applications/arduino_pinout/README.md b/bsp/stm32/stm32f401-st-nucleo/applications/arduino_pinout/README.md index f87490bf3798495d5575a65e4b5622009fee4577..22fdda741d1cf2cf509f9632c0891e19b381a21d 100644 --- a/bsp/stm32/stm32f401-st-nucleo/applications/arduino_pinout/README.md +++ b/bsp/stm32/stm32f401-st-nucleo/applications/arduino_pinout/README.md @@ -32,10 +32,10 @@ Hardware Drivers Config ---> | 7 (D7) | PA8 | 是 | | | 8 (D8) | PA9 | 是 | | | 9 (D9) | PC7 | 是 | PWM（定时器3发生） | -| 10 (D10) | PB6 | 是 | SPI1-CS，被RT-Thread的SPI设备框架spi1总线接管，不可当做普通IO | -| 11 (D11) | PA7 | 是 | SPI1-MOSI，被RT-Thread的SPI设备框架spi1总线接管，不可当做普通IO | -| 12 (D12) | PA6 | 是 | SPI1-MISO，被RT-Thread的SPI设备框架spi1总线接管，不可当做普通IO | -| 13 (D13) | PA5 | 是 | SPI1-SCK，被RT-Thread的SPI设备框架spi1总线接管，不可当做普通IO | +| 10 (D10) | PB6 | 是 | | +| 11 (D11) | PA7 | 是 | | +| 12 (D12) | PA6 | 是 | | +| 13 (D13) | PA5 | 是 | | | 14 (D14) | PB9 | 是 | I2C1-SDA，被RT-Thread的I2C设备框架i2c1总线接管，不可当做普通IO | | 15 (D15) | PB8 | 是 | I2C1_SCL，被RT-Thread的I2C设备框架i2c1总线接管，不可当做普通IO | | 16 (D16) | PC13 | 是 | Nucleo板载用户按键（左侧蓝色） | @@ -61,8 +61,3 @@ Hardware Drivers Config ---> ## 3 I2C总线 STM32F401 Nucleo板的I2C总线是板上丝印的 `SCL/D15` 和 `SDA/D14` 引脚，这两个引脚是被RT-Thread I2C设备框架接管的，不需要直接操控这两个引脚，直接引用`#include `（Arduino官方I2C头文件）即可使用。 - -## 4 SPI总线 - -STM32F401 Nucleo板的SPI总线是板上丝印的 `SCK/D13`、`MISO/D12`、`MOSI/D11`引脚，这3个引脚是被RT-Thread SPI设备框架接管的，不需要直接操控这3个引脚，直接引用`#include `（Arduino官方SPI头文件）即可使用。按照Arduino的编程标准，用户需要自行控制片选信号。 - diff --git a/bsp/stm32/stm32f401-st-nucleo/applications/arduino_pinout/pins_arduino.c b/bsp/stm32/stm32f401-st-nucleo/applications/arduino_pinout/pins_arduino.c index b12f5ab0acb2b3a55f5fe2e89815793a9c68a23e..441d33f11330e791fb40e76efcf2fd9f05d56bbc 100644 --- a/bsp/stm32/stm32f401-st-nucleo/applications/arduino_pinout/pins_arduino.c +++ b/bsp/stm32/stm32f401-st-nucleo/applications/arduino_pinout/pins_arduino.c @@ -30,10 +30,10 @@ const pin_map_t pin_map_table[]= {D7, GET_PIN(A,8)}, {D8, GET_PIN(A,9)}, {D9, GET_PIN(C,7), "pwm3", 2}, /* PWM */ - {D10}, /* SPI1-CS */ - {D11}, /* SPI1-MOSI */ - {D12}, /* SPI1-MISO */ - {D13}, /* SPI1-SCK */ + {D10, GET_PIN(B,6)}, + {D11, GET_PIN(A,7)}, + {D12, GET_PIN(A,6)}, + {D13, GET_PIN(A,5)}, {D14}, /* I2C1-SDA */ {D15}, /* I2C1-SCL */ {D16, GET_PIN(C,13)}, /* user button */ diff --git a/bsp/stm32/stm32f401-st-nucleo/applications/arduino_pinout/pins_arduino.h b/bsp/stm32/stm32f401-st-nucleo/applications/arduino_pinout/pins_arduino.h index e8e396f93652800e3e1c3ae95f54eb5fbfa27ff8..19fb0f754ea26ab14d6e4bce618398335712c533 100644 --- a/bsp/stm32/stm32f401-st-nucleo/applications/arduino_pinout/pins_arduino.h +++ b/bsp/stm32/stm32f401-st-nucleo/applications/arduino_pinout/pins_arduino.h @@ -42,7 +42,5 @@ #define LED_BUILTIN D13 /* Default Built-in LED */ #define RTDUINO_DEFAULT_IIC_BUS_NAME "i2c1" -#define RTDUINO_DEFAULT_SPI_BUS_NAME "spi1" -#define RTDUINO_DEFAULT_HWTIMER_DEVICE_NAME "timer11" #endif /* Pins_Arduino_h */ diff --git a/bsp/stm32/stm32f401-st-nucleo/board/Kconfig b/bsp/stm32/stm32f401-st-nucleo/board/Kconfig index 553e47e78999af8a5b2b79ccb7266c92295c31fa..0d49866a4cd3828e8e5b6b91f228b3c8cc289aa9 100644 --- a/bsp/stm32/stm32f401-st-nucleo/board/Kconfig +++ b/bsp/stm32/stm32f401-st-nucleo/board/Kconfig @@ -19,8 +19,6 @@ menu "Onboard Peripheral Drivers" select PKG_USING_RTDUINO select BSP_USING_STLINK_TO_USART select BSP_USING_GPIO - select BSP_USING_TIM - select BSP_USING_TIM11 select BSP_USING_ADC select BSP_USING_ADC1 select BSP_USING_PWM @@ -32,11 +30,8 @@ menu "Onboard Peripheral Drivers" select BSP_USING_PWM3_CH2 select BSP_USING_I2C select BSP_USING_I2C1 - select BSP_USING_SPI - select BSP_USING_SPI1 imply RTDUINO_USING_SERVO imply RTDUINO_USING_WIRE - imply RTDUINO_USING_SPI imply RTDUINO_USING_ADAFRUIT imply RTDUINO_USING_MSTIMER2 default n