1. 13 3月, 2016 4 次提交
  2. 12 3月, 2016 12 次提交
    • M
      x86/efi: Fix boot crash by always mapping boot service regions into new EFI page tables · 452308de
      Matt Fleming 提交于
      Some machines have EFI regions in page zero (physical address
      0x00000000) and historically that region has been added to the e820
      map via trim_bios_range(), and ultimately mapped into the kernel page
      tables. It was not mapped via efi_map_regions() as one would expect.
      
      Alexis reports that with the new separate EFI page tables some boot
      services regions, such as page zero, are not mapped. This triggers an
      oops during the SetVirtualAddressMap() runtime call.
      
      For the EFI boot services quirk on x86 we need to memblock_reserve()
      boot services regions until after SetVirtualAddressMap(). Doing that
      while respecting the ownership of regions that may have already been
      reserved by the kernel was the motivation behind this commit:
      
        7d68dc3f ("x86, efi: Do not reserve boot services regions within reserved areas")
      
      That patch was merged at a time when the EFI runtime virtual mappings
      were inserted into the kernel page tables as described above, and the
      trick of setting ->numpages (and hence the region size) to zero to
      track regions that should not be freed in efi_free_boot_services()
      meant that we never mapped those regions in efi_map_regions(). Instead
      we were relying solely on the existing kernel mappings.
      
      Now that we have separate page tables we need to make sure the EFI
      boot services regions are mapped correctly, even if someone else has
      already called memblock_reserve(). Instead of stashing a tag in
      ->numpages, set the EFI_MEMORY_RUNTIME bit of ->attribute. Since it
      generally makes no sense to mark a boot services region as required at
      runtime, it's pretty much guaranteed the firmware will not have
      already set this bit.
      
      For the record, the specific circumstances under which Alexis
      triggered this bug was that an EFI runtime driver on his machine was
      responding to the EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE event during
      SetVirtualAddressMap().
      
      The event handler for this driver looks like this,
      
        sub rsp,0x28
        lea rdx,[rip+0x2445] # 0xaa948720
        mov ecx,0x4
        call func_aa9447c0  ; call to ConvertPointer(4, & 0xaa948720)
        mov r11,QWORD PTR [rip+0x2434] # 0xaa948720
        xor eax,eax
        mov BYTE PTR [r11+0x1],0x1
        add rsp,0x28
        ret
      
      Which is pretty typical code for an EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE
      handler. The "mov r11, QWORD PTR [rip+0x2424]" was the faulting
      instruction because ConvertPointer() was being called to convert the
      address 0x0000000000000000, which when converted is left unchanged and
      remains 0x0000000000000000.
      
      The output of the oops trace gave the impression of a standard NULL
      pointer dereference bug, but because we're accessing physical
      addresses during ConvertPointer(), it wasn't. EFI boot services code
      is stored at that address on Alexis' machine.
      Reported-by: NAlexis Murzeau <amurzeau@gmail.com>
      Signed-off-by: NMatt Fleming <matt@codeblueprint.co.uk>
      Cc: Andy Lutomirski <luto@amacapital.net>
      Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
      Cc: Ben Hutchings <ben@decadent.org.uk>
      Cc: Borislav Petkov <bp@alien8.de>
      Cc: Brian Gerst <brgerst@gmail.com>
      Cc: Denys Vlasenko <dvlasenk@redhat.com>
      Cc: H. Peter Anvin <hpa@zytor.com>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
      Cc: Matthew Garrett <mjg59@srcf.ucam.org>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Raphael Hertzog <hertzog@debian.org>
      Cc: Roger Shimizu <rogershimizu@gmail.com>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: linux-efi@vger.kernel.org
      Link: http://lkml.kernel.org/r/1457695163-29632-2-git-send-email-matt@codeblueprint.co.uk
      Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=815125Signed-off-by: NIngo Molnar <mingo@kernel.org>
      452308de
    • B
      x86/fpu: Fix eager-FPU handling on legacy FPU machines · 6e686709
      Borislav Petkov 提交于
      i486 derived cores like Intel Quark support only the very old,
      legacy x87 FPU (FSAVE/FRSTOR, CPUID bit FXSR is not set), and
      our FPU code wasn't handling the saving and restoring there
      properly in the 'eagerfpu' case.
      
      So after we made eagerfpu the default for all CPU types:
      
        58122bf1 x86/fpu: Default eagerfpu=on on all CPUs
      
      these old FPU designs broke. First, Andy Shevchenko reported a splat:
      
        WARNING: CPU: 0 PID: 823 at arch/x86/include/asm/fpu/internal.h:163 fpu__clear+0x8c/0x160
      
      which was us trying to execute FXRSTOR on those machines even though
      they don't support it.
      
      After taking care of that, Bryan O'Donoghue reported that a simple FPU
      test still failed because we weren't initializing the FPU state properly
      on those machines.
      
      Take care of all that.
      Reported-and-tested-by: NBryan O'Donoghue <pure.logic@nexus-software.ie>
      Reported-by: NAndy Shevchenko <andy.shevchenko@gmail.com>
      Signed-off-by: NBorislav Petkov <bp@suse.de>
      Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
      Cc: Andrew Morton <akpm@linux-foundation.org>
      Cc: Andy Lutomirski <luto@amacapital.net>
      Cc: Borislav Petkov <bp@alien8.de>
      Cc: Brian Gerst <brgerst@gmail.com>
      Cc: Dave Hansen <dave.hansen@linux.intel.com>
      Cc: Denys Vlasenko <dvlasenk@redhat.com>
      Cc: Fenghua Yu <fenghua.yu@intel.com>
      Cc: H. Peter Anvin <hpa@zytor.com>
      Cc: Oleg Nesterov <oleg@redhat.com>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Yu-cheng <yu-cheng.yu@intel.com>
      Link: http://lkml.kernel.org/r/20160311113206.GD4312@pd.tnicSigned-off-by: NIngo Molnar <mingo@kernel.org>
      6e686709
    • L
      Merge tag 'for-linus-20160311' of git://git.infradead.org/linux-mtd · 03c668a9
      Linus Torvalds 提交于
      Pull MTD fixes from Brian Norris:
       "Late MTD fix for v4.5:
      
         - A simple error code handling fix for the NAND ECC test; this was a
           regression in v4.5-rc1
      
         - A MAINTAINERS update, which might as well go in ASAP"
      
      * tag 'for-linus-20160311' of git://git.infradead.org/linux-mtd:
        MAINTAINERS: add a maintainer for the NAND subsystem
        mtd: nand: tests: fix regression introduced in mtd_nandectest
      03c668a9
    • L
      Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux · 3ab0a0f9
      Linus Torvalds 提交于
      Pull drm/i915 fixes from Dave Airlie:
       "Just two i915 regression fixes, that should be it from me"
      
      * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
        drm/i915: Actually retry with bit-banging after GMBUS timeout
        drm/i915: Fix bogus dig_port_map[] assignment for pre-HSW
      3ab0a0f9
    • M
      mm/mempool: avoid KASAN marking mempool poison checks as use-after-free · 76401310
      Matthew Dawson 提交于
      When removing an element from the mempool, mark it as unpoisoned in KASAN
      before verifying its contents for SLUB/SLAB debugging.  Otherwise KASAN
      will flag the reads checking the element use-after-free writes as
      use-after-free reads.
      Signed-off-by: NMatthew Dawson <matthew@mjdsystems.ca>
      Acked-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      76401310
    • L
      Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc · 2a4fb270
      Linus Torvalds 提交于
      Pull ARM SoC fixes from Olof Johansson:
       "Two more fixes for 4.5:
      
         - One is a fix for OMAP that is urgently needed to avoid DRA7xx chips
           from premature aging, by always keeping the Ethernet clock enabled.
      
         - The other solves a I/O memory layout issue on Armada, where SROM
           and PCI memory windows were conflicting in some configurations"
      
      * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
        ARM: mvebu: fix overlap of Crypto SRAM with PCIe memory window
        ARM: dts: dra7: do not gate cpsw clock due to errata i877
        ARM: OMAP2+: hwmod: Introduce ti,no-idle dt property
      2a4fb270
    • L
      Merge tag 'media/v4.5-5' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media · 95f41fb2
      Linus Torvalds 提交于
      Pull media fix from Mauro Carvalho Chehab:
       "One last time fix: It adds a code that prevents some media tools like
        media-ctl to hide some entities that have their IDs out of the range
        expected by those apps"
      
      * tag 'media/v4.5-5' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
        [media] media-device: map new functions into old types for legacy API
      95f41fb2
    • T
      ARM: mvebu: fix overlap of Crypto SRAM with PCIe memory window · d7d5a43c
      Thomas Petazzoni 提交于
      When the Crypto SRAM mappings were added to the Device Tree files
      describing the Armada XP boards in commit c466d997 ("ARM: mvebu:
      define crypto SRAM ranges for all armada-xp boards"), the fact that
      those mappings were overlaping with the PCIe memory aperture was
      overlooked. Due to this, we currently have for all Armada XP platforms
      a situation that looks like this:
      
      Memory mapping on Armada XP boards with internal registers at
      0xf1000000:
      
       - 0x00000000 -> 0xf0000000	3.75G 	RAM
       - 0xf0000000 -> 0xf1000000	16M	NOR flashes (AXP GP / AXP DB)
       - 0xf1000000 -> 0xf1100000	1M	internal registers
       - 0xf8000000 -> 0xffe0000	126M	PCIe memory aperture
       - 0xf8100000 -> 0xf8110000	64KB	Crypto SRAM #0	=> OVERLAPS WITH PCIE !
       - 0xf8110000 -> 0xf8120000	64KB	Crypto SRAM #1	=> OVERLAPS WITH PCIE !
       - 0xffe00000 -> 0xfff00000	1M	PCIe I/O aperture
       - 0xfff0000  -> 0xffffffff	1M	BootROM
      
      The overlap means that when PCIe devices are added, depending on their
      memory window needs, they might or might not be mapped into the
      physical address space. Indeed, they will not be mapped if the area
      allocated in the PCIe memory aperture by the PCI core overlaps with
      one of the Crypto SRAM. Typically, a Intel IGB PCIe NIC that needs 8MB
      of PCIe memory will see its PCIe memory window allocated from
      0xf80000000 for 8MB, which overlaps with the Crypto SRAM windows. Due
      to this, the PCIe window is not created, and any attempt to access the
      PCIe window makes the kernel explode:
      
      [    3.302213] igb: Copyright (c) 2007-2014 Intel Corporation.
      [    3.307841] pci 0000:00:09.0: enabling device (0140 -> 0143)
      [    3.313539] mvebu_mbus: cannot add window '4:f8', conflicts with another window
      [    3.320870] mvebu-pcie soc:pcie-controller: Could not create MBus window at [mem 0xf8000000-0xf87fffff]: -22
      [    3.330811] Unhandled fault: external abort on non-linefetch (0x1008) at 0xf08c0018
      
      This problem does not occur on Armada 370 boards, because we use the
      following memory mapping (for boards that have internal registers at
      0xf1000000):
      
       - 0x00000000 -> 0xf0000000	3.75G 	RAM
       - 0xf0000000 -> 0xf1000000	16M	NOR flashes (AXP GP / AXP DB)
       - 0xf1000000 -> 0xf1100000	1M	internal registers
       - 0xf1100000 -> 0xf1110000	64KB	Crypto SRAM #0 => OK !
       - 0xf8000000 -> 0xffe0000	126M	PCIe memory
       - 0xffe00000 -> 0xfff00000	1M	PCIe I/O
       - 0xfff0000  -> 0xffffffff	1M	BootROM
      
      Obviously, the solution is to align the location of the Crypto SRAM
      mappings of Armada XP to be similar with the ones on Armada 370, i.e
      have them between the "internal registers" area and the beginning of
      the PCIe aperture.
      
      However, we have a special case with the OpenBlocks AX3-4 platform,
      which has a 128 MB NOR flash. Currently, this NOR flash is mapped from
      0xf0000000 to 0xf8000000. This is possible because on OpenBlocks
      AX3-4, the internal registers are not at 0xf1000000. And this explains
      why the Crypto SRAM mappings were not configured at the same place on
      Armada XP.
      
      Hence, the solution is two-fold:
      
       (1) Move the NOR flash mapping on Armada XP OpenBlocks AX3-4 from
           0xe8000000 to 0xf0000000. This frees the 0xf0000000 ->
           0xf80000000 space.
      
       (2) Move the Crypto SRAM mappings on Armada XP to be similar to
           Armada 370 (except of course that Armada XP has two Crypto SRAM
           and not one).
      
      After this patch, the memory mapping on Armada XP boards with
      registers at 0xf1 is:
      
       - 0x00000000 -> 0xf0000000	3.75G 	RAM
       - 0xf0000000 -> 0xf1000000	16M	NOR flashes (AXP GP / AXP DB)
       - 0xf1000000 -> 0xf1100000	1M	internal registers
       - 0xf1100000 -> 0xf1110000	64KB	Crypto SRAM #0
       - 0xf1110000 -> 0xf1120000	64KB	Crypto SRAM #1
       - 0xf8000000 -> 0xffe0000	126M	PCIe memory
       - 0xffe00000 -> 0xfff00000	1M	PCIe I/O
       - 0xfff0000  -> 0xffffffff	1M	BootROM
      
      And the memory mapping for the special case of the OpenBlocks AX3-4
      (internal registers at 0xd0000000, NOR of 128 MB):
      
       - 0x00000000 -> 0xc0000000	3G 	RAM
       - 0xd0000000 -> 0xd1000000	1M	internal registers
       - 0xe800000  -> 0xf0000000	128M	NOR flash
       - 0xf1100000 -> 0xf1110000	64KB	Crypto SRAM #0
       - 0xf1110000 -> 0xf1120000	64KB	Crypto SRAM #1
       - 0xf8000000 -> 0xffe0000	126M	PCIe memory
       - 0xffe00000 -> 0xfff00000	1M	PCIe I/O
       - 0xfff0000  -> 0xffffffff	1M	BootROM
      
      Fixes: c466d997 ("ARM: mvebu: define crypto SRAM ranges for all armada-xp boards")
      Reported-by: NPhil Sutter <phil@nwl.cc>
      Cc: Phil Sutter <phil@nwl.cc>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
      Acked-by: NGregory CLEMENT <gregory.clement@free-electrons.com>
      Signed-off-by: NOlof Johansson <olof@lixom.net>
      d7d5a43c
    • L
      Merge tag 'dmaengine-fix-4.5' of git://git.infradead.org/users/vkoul/slave-dma · 20698c92
      Linus Torvalds 提交于
      Pull dmaengine fixes from Vinod Koul:
       "Two fixes showed up in last few days, and they should be included in
        4.5.  Summary:
      
        Two more late fixes to drivers, nothing major here:
      
         - A memory leak fix in fsdma unmap the dma descriptors on freeup
      
         - A fix in xdmac driver for residue calculation of dma descriptor"
      
      * tag 'dmaengine-fix-4.5' of git://git.infradead.org/users/vkoul/slave-dma:
        dmaengine: at_xdmac: fix residue computation
        dmaengine: fsldma: fix memory leak
      20698c92
    • L
      Merge tag 'pm+acpi-4.5-final' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm · 7ae9c768
      Linus Torvalds 提交于
      Pull power management and ACPI fixes from Rafael Wysocki:
       "Two more fixes for issues introduced recently, one in the generic
        device properties framework and one in ACPICA.
      
        Specifics:
      
         - Revert a recent ACPICA commit that has been reverted upstream,
           because it caused problems to happen on user systems and the
           problem it attempted to address will not be relevant any more after
           upcoming ACPI specification changes (Bob Moore).
      
         - Fix crash in the generic device properties framework introduced by
           a recent change that forgot to check pointers against error values
           in addition to checking them against NULL (Heikki Krogerus)"
      
      * tag 'pm+acpi-4.5-final' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
        device property: fwnode->secondary may contain ERR_PTR(-ENODEV)
        ACPICA: Revert "Parser: Fix for SuperName method invocation"
      7ae9c768
    • L
      Merge tag 'xfs-for-linus-4.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs · 2a62ec0a
      Linus Torvalds 提交于
      Pull xfs fixes from Dave Chinner:
       "This is a fix for a regression introduced in 4.5-rc1 by the new torn
        log write detection code.  The regression only affects people moving a
        clean filesystem between machines/kernels of different architecture
        (such as changing between 32 bit and 64 bit kernels), but this is the
        recommended (and only!) safe way to migrate a filesystem between
        architectures so we really need to ensure it works.
      
        The changes are larger than I'd prefer right at the end of the release
        cycle, but the majority of the change is just factoring code to enable
        the detection of a clean log at the correct time to avoid this issue.
      
        Changes:
      
         - Only perform torn log write detection on dirty logs.  This prevents
           failures being detected due to a clean filesystem being moved
           between machines or kernels of different architectures (e.g.  32 ->
           64 bit, BE -> LE, etc).  This fixes a regression introduced by the
           torn log write detection in 4.5-rc1"
      
      * tag 'xfs-for-linus-4.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs:
        xfs: only run torn log write detection on dirty logs
        xfs: refactor in-core log state update to helper
        xfs: refactor unmount record detection into helper
        xfs: separate log head record discovery from verification
      2a62ec0a
    • L
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs · 63cf207e
      Linus Torvalds 提交于
      Pull vfs fixes from Al Viro:
       "A couple of fixes: Fix for my dumb braino in ncpfs and a long-standing
        breakage on recovery from failed rename() in jffs2"
      
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
        jffs2: reduce the breakage on recovery from halfway failed rename()
        ncpfs: fix a braino in OOM handling in ncp_fill_cache()
      63cf207e
  3. 11 3月, 2016 7 次提交
  4. 10 3月, 2016 17 次提交
    • L
      dmaengine: at_xdmac: fix residue computation · 25c5e962
      Ludovic Desroches 提交于
      When computing the residue we need two pieces of information: the current
      descriptor and the remaining data of the current descriptor. To get
      that information, we need to read consecutively two registers but we
      can't do it in an atomic way. For that reason, we have to check manually
      that current descriptor has not changed.
      Signed-off-by: NLudovic Desroches <ludovic.desroches@atmel.com>
      Suggested-by: NCyrille Pitchen <cyrille.pitchen@atmel.com>
      Reported-by: NDavid Engraf <david.engraf@sysgo.com>
      Tested-by: NDavid Engraf <david.engraf@sysgo.com>
      Fixes: e1f7c9ee ("dmaengine: at_xdmac: creation of the atmel
      eXtended DMA Controller driver")
      Cc: stable@vger.kernel.org #4.1 and later
      Signed-off-by: NVinod Koul <vinod.koul@intel.com>
      25c5e962
    • B
      x86/delay: Avoid preemptible context checks in delay_mwaitx() · 84477336
      Borislav Petkov 提交于
      We do use this_cpu_ptr(&cpu_tss) as a cacheline-aligned, seldomly
      accessed per-cpu var as the MONITORX target in delay_mwaitx(). However,
      when called in preemptible context, this_cpu_ptr -> smp_processor_id() ->
      debug_smp_processor_id() fires:
      
        BUG: using smp_processor_id() in preemptible [00000000] code: udevd/312
        caller is delay_mwaitx+0x40/0xa0
      
      But we don't care about that check - we only need cpu_tss as a MONITORX
      target and it doesn't really matter which CPU's var we're touching as
      we're going idle anyway. Fix that.
      Suggested-by: NAndy Lutomirski <luto@kernel.org>
      Signed-off-by: NBorislav Petkov <bp@suse.de>
      Cc: Andy Lutomirski <luto@amacapital.net>
      Cc: Huang Rui <ray.huang@amd.com>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: spg_linux_kernel@amd.com
      Link: http://lkml.kernel.org/r/20160309205622.GG6564@pd.tnicSigned-off-by: NIngo Molnar <mingo@kernel.org>
      84477336
    • P
      KVM: MMU: fix reserved bit check for ept=0/CR0.WP=0/CR4.SMEP=1/EFER.NX=0 · 5f0b8199
      Paolo Bonzini 提交于
      KVM has special logic to handle pages with pte.u=1 and pte.w=0 when
      CR0.WP=1.  These pages' SPTEs flip continuously between two states:
      U=1/W=0 (user and supervisor reads allowed, supervisor writes not allowed)
      and U=0/W=1 (supervisor reads and writes allowed, user writes not allowed).
      
      When SMEP is in effect, however, U=0 will enable kernel execution of
      this page.  To avoid this, KVM also sets NX=1 in the shadow PTE together
      with U=0, making the two states U=1/W=0/NX=gpte.NX and U=0/W=1/NX=1.
      When guest EFER has the NX bit cleared, the reserved bit check thinks
      that the latter state is invalid; teach it that the smep_andnot_wp case
      will also use the NX bit of SPTEs.
      
      Cc: stable@vger.kernel.org
      Reviewed-by: NXiao Guangrong <guangrong.xiao@linux.inel.com>
      Fixes: c258b62bSigned-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      5f0b8199
    • P
      KVM: MMU: fix ept=0/pte.u=1/pte.w=0/CR0.WP=0/CR4.SMEP=1/EFER.NX=0 combo · 844a5fe2
      Paolo Bonzini 提交于
      Yes, all of these are needed. :) This is admittedly a bit odd, but
      kvm-unit-tests access.flat tests this if you run it with "-cpu host"
      and of course ept=0.
      
      KVM runs the guest with CR0.WP=1, so it must handle supervisor writes
      specially when pte.u=1/pte.w=0/CR0.WP=0.  Such writes cause a fault
      when U=1 and W=0 in the SPTE, but they must succeed because CR0.WP=0.
      When KVM gets the fault, it sets U=0 and W=1 in the shadow PTE and
      restarts execution.  This will still cause a user write to fault, while
      supervisor writes will succeed.  User reads will fault spuriously now,
      and KVM will then flip U and W again in the SPTE (U=1, W=0).  User reads
      will be enabled and supervisor writes disabled, going back to the
      originary situation where supervisor writes fault spuriously.
      
      When SMEP is in effect, however, U=0 will enable kernel execution of
      this page.  To avoid this, KVM also sets NX=1 in the shadow PTE together
      with U=0.  If the guest has not enabled NX, the result is a continuous
      stream of page faults due to the NX bit being reserved.
      
      The fix is to force EFER.NX=1 even if the CPU is taking care of the EFER
      switch.  (All machines with SMEP have the CPU_LOAD_IA32_EFER vm-entry
      control, so they do not use user-return notifiers for EFER---if they did,
      EFER.NX would be forced to the same value as the host).
      
      There is another bug in the reserved bit check, which I've split to a
      separate patch for easier application to stable kernels.
      
      Cc: stable@vger.kernel.org
      Cc: Andy Lutomirski <luto@amacapital.net>
      Reviewed-by: NXiao Guangrong <guangrong.xiao@linux.intel.com>
      Fixes: f6577a5fSigned-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      844a5fe2
    • Y
      x86/fpu: Revert ("x86/fpu: Disable AVX when eagerfpu is off") · a65050c6
      Yu-cheng Yu 提交于
      Leonid Shatz noticed that the SDM interpretation of the following
      recent commit:
      
        394db20c ("x86/fpu: Disable AVX when eagerfpu is off")
      
      ... is incorrect and that the original behavior of the FPU code was correct.
      
      Because AVX is not stated in CR0 TS bit description, it was mistakenly
      believed to be not supported for lazy context switch. This turns out
      to be false:
      
        Intel Software Developer's Manual Vol. 3A, Sec. 2.5 Control Registers:
      
         'TS Task Switched bit (bit 3 of CR0) -- Allows the saving of the x87 FPU/
          MMX/SSE/SSE2/SSE3/SSSE3/SSE4 context on a task switch to be delayed until
          an x87 FPU/MMX/SSE/SSE2/SSE3/SSSE3/SSE4 instruction is actually executed
          by the new task.'
      
        Intel Software Developer's Manual Vol. 2A, Sec. 2.4 Instruction Exception
        Specification:
      
         'AVX instructions refer to exceptions by classes that include #NM
          "Device Not Available" exception for lazy context switch.'
      
      So revert the commit.
      Reported-by: NLeonid Shatz <leonid.shatz@ravellosystems.com>
      Signed-off-by: NYu-cheng Yu <yu-cheng.yu@intel.com>
      Cc: Andy Lutomirski <luto@kernel.org>
      Cc: Borislav Petkov <bp@suse.de>
      Cc: Dave Hansen <dave.hansen@linux.intel.com>
      Cc: Fenghua Yu <fenghua.yu@intel.com>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Ravi V. Shankar <ravi.v.shankar@intel.com>
      Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Link: http://lkml.kernel.org/r/1457569734-3785-1-git-send-email-yu-cheng.yu@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      a65050c6
    • M
      s390/mm: four page table levels vs. fork · 3446c13b
      Martin Schwidefsky 提交于
      The fork of a process with four page table levels is broken since
      git commit 6252d702 "[S390] dynamic page tables."
      
      All new mm contexts are created with three page table levels and
      an asce limit of 4TB. If the parent has four levels dup_mmap will
      add vmas to the new context which are outside of the asce limit.
      The subsequent call to copy_page_range will walk the three level
      page table structure of the new process with non-zero pgd and pud
      indexes. This leads to memory clobbers as the pgd_index *and* the
      pud_index is added to the mm->pgd pointer without a pgd_deref
      in between.
      
      The init_new_context() function is selecting the number of page
      table levels for a new context. The function is used by mm_init()
      which in turn is called by dup_mm() and mm_alloc(). These two are
      used by fork() and exec(). The init_new_context() function can
      distinguish the two cases by looking at mm->context.asce_limit,
      for fork() the mm struct has been copied and the number of page
      table levels may not change. For exec() the mm_alloc() function
      set the new mm structure to zero, in this case a three-level page
      table is created as the temporary stack space is located at
      STACK_TOP_MAX = 4TB.
      
      This fixes CVE-2016-2143.
      Reported-by: NMarcin Kościelnicki <koriakin@0x04.net>
      Reviewed-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
      Cc: stable@vger.kernel.org
      Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
      3446c13b
    • L
      Merge tag 'spi-fix-v4.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi · 8e0f93cd
      Linus Torvalds 提交于
      Pull spi fixes from Mark Brown:
       "A few driver specific fixes for the Rockchip and i.MX SPI controllers,
        especially for the i.MX they're annoying bugs if you run into them"
      
      * tag 'spi-fix-v4.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
        spi: imx: fix spi resource leak with dma transfer
        spi: imx: allow only WML aligned transfers to use DMA
        spi: rockchip: add missing spi_master_put
        spi: rockchip: disable runtime pm when in err case
      8e0f93cd
    • M
      3ee20abb
    • M
      c23663ac
    • L
      Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 · 718e47a5
      Linus Torvalds 提交于
      Pull ext4 fix from Ted Ts'o:
       "This fixes a regression which crept in v4.5-rc5"
      
      * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
        ext4: iterate over buffer heads correctly in move_extent_per_page()
      718e47a5
    • L
      Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux · a6e434e9
      Linus Torvalds 提交于
      Pull drm fixes from Dave Airlie:
       "A few imx fixes I missed from a couple of weeks ago, they still aren't
        that big and fix some regression and a fail to boot problem.
      
        Other than that, a couple of regression fixes for radeon/amdgpu, one
        regression fix for vmwgfx and one regression fix for tda998x"
      
      * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
        Revert "drm/radeon/pm: adjust display configuration after powerstate"
        drm/amdgpu/dp: add back special handling for NUTMEG
        drm/radeon/dp: add back special handling for NUTMEG
        drm/i2c: tda998x: Choose between atomic or non atomic dpms helper
        drm/vmwgfx: Add back ->detect() and ->fill_modes()
        drm/radeon: Fix error handling in radeon_flip_work_func.
        drm/amdgpu: Fix error handling in amdgpu_flip_work_func.
        drm/imx: Add missing DRM_FORMAT_RGB565 to ipu_plane_formats
        drm/imx: notify DRM core about CRTC vblank state
        gpu: ipu-v3: Reset IPU before activating IRQ
        gpu: ipu-v3: Do not bail out on missing optional port nodes
      a6e434e9
    • L
      Merge tag 'trace-fixes-v4.5-rc7' of... · 8205ff1d
      Linus Torvalds 提交于
      Merge tag 'trace-fixes-v4.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
      
      Pull tracing fix from Steven Rostedt:
       "I previously sent a fix that prevents all trace events from being
        called if the current cpu is offline.
      
        But I forgot that in 3.18, we added lockdep checks to test RCU usage
        even when the event is disabled.  Although there cannot be any bug
        when a cpu is going offline, we now get false warnings triggered by
        the added checks of the event being disabled.
      
        I removed the check from the tracepoint code itself, and added it to
        the condition section (which is "1" for 'no condition').  This way the
        online cpu check will get checked in all the right locations"
      
      * tag 'trace-fixes-v4.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
        tracing: Fix check for cpu online when event is disabled
      8205ff1d
    • E
      ext4: iterate over buffer heads correctly in move_extent_per_page() · 6ffe77ba
      Eryu Guan 提交于
      In commit bcff2488 ("ext4: don't read blocks from disk after extents
      being swapped") bh is not updated correctly in the for loop and wrong
      data has been written to disk. generic/324 catches this on sub-page
      block size ext4.
      
      Fixes: bcff2488 ("ext4: don't read blocks from disk after extentsbeing swapped")
      Signed-off-by: NEryu Guan <guaneryu@gmail.com>
      Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
      6ffe77ba
    • L
      Merge branch 'akpm' (patches from Andrew) · 380173ff
      Linus Torvalds 提交于
      Merge fixes from Andrew Morton:
       "13 fixes"
      
      * emailed patches from Andrew Morton <akpm@linux-foundation.org>:
        dma-mapping: avoid oops when parameter cpu_addr is null
        mm/hugetlb: use EOPNOTSUPP in hugetlb sysctl handlers
        memremap: check pfn validity before passing to pfn_to_page()
        mm, thp: fix migration of PTE-mapped transparent huge pages
        dax: check return value of dax_radix_entry()
        ocfs2: fix return value from ocfs2_page_mkwrite()
        arm64: kasan: clear stale stack poison
        sched/kasan: remove stale KASAN poison after hotplug
        kasan: add functions to clear stack poison
        mm: fix mixed zone detection in devm_memremap_pages
        list: kill list_force_poison()
        mm: __delete_from_page_cache show Bad page if mapped
        mm/hugetlb: hugetlb_no_page: rate-limit warning message
      380173ff
    • Z
      dma-mapping: avoid oops when parameter cpu_addr is null · d6b7eaeb
      Zhen Lei 提交于
      To keep consistent with kfree, which tolerate ptr is NULL.  We do this
      because sometimes we may use goto statement, so that success and failure
      case can share parts of the code.  But unfortunately, dma_free_coherent
      called with parameter cpu_addr is null will cause oops, such as showed
      below:
      
        Unable to handle kernel paging request at virtual address ffffffc020d3b2b8
        pgd = ffffffc083a61000
        [ffffffc020d3b2b8] *pgd=0000000000000000, *pud=0000000000000000
        CPU: 4 PID: 1489 Comm: malloc_dma_1 Tainted: G           O    4.1.12 #1
        Hardware name: ARM64 (DT)
        PC is at __dma_free_coherent.isra.10+0x74/0xc8
        LR is at __dma_free+0x9c/0xb0
        Process malloc_dma_1 (pid: 1489, stack limit = 0xffffffc0837fc020)
        [...]
        Call trace:
          __dma_free_coherent.isra.10+0x74/0xc8
          __dma_free+0x9c/0xb0
          malloc_dma+0x104/0x158 [dma_alloc_coherent_mtmalloc]
          kthread+0xec/0xfc
      Signed-off-by: NZhen Lei <thunder.leizhen@huawei.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      d6b7eaeb
    • J
      mm/hugetlb: use EOPNOTSUPP in hugetlb sysctl handlers · 86613628
      Jan Stancek 提交于
      Replace ENOTSUPP with EOPNOTSUPP.  If hugepages are not supported, this
      value is propagated to userspace.  EOPNOTSUPP is part of uapi and is
      widely supported by libc libraries.
      
      It gives nicer message to user, rather than:
      
        # cat /proc/sys/vm/nr_hugepages
        cat: /proc/sys/vm/nr_hugepages: Unknown error 524
      
      And also LTP's proc01 test was failing because this ret code (524)
      was unexpected:
      
        proc01      1  TFAIL  :  proc01.c:396: read failed: /proc/sys/vm/nr_hugepages: errno=???(524): Unknown error 524
        proc01      2  TFAIL  :  proc01.c:396: read failed: /proc/sys/vm/nr_hugepages_mempolicy: errno=???(524): Unknown error 524
        proc01      3  TFAIL  :  proc01.c:396: read failed: /proc/sys/vm/nr_overcommit_hugepages: errno=???(524): Unknown error 524
      Signed-off-by: NJan Stancek <jstancek@redhat.com>
      Acked-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
      Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
      Acked-by: NDavid Rientjes <rientjes@google.com>
      Acked-by: NHillf Danton <hillf.zj@alibaba-inc.com>
      Cc: Mike Kravetz <mike.kravetz@oracle.com>
      Cc: Dave Hansen <dave.hansen@linux.intel.com>
      Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      86613628
    • A
      memremap: check pfn validity before passing to pfn_to_page() · ac343e88
      Ard Biesheuvel 提交于
      In memremap's helper function try_ram_remap(), we dereference a struct
      page pointer that was derived from a PFN that is known to be covered by
      a 'System RAM' iomem region, and is thus assumed to be a 'valid' PFN,
      i.e., a PFN that has a struct page associated with it and is covered by
      the kernel direct mapping.
      
      However, the assumption that there is a 1:1 relation between the System
      RAM iomem region and the kernel direct mapping is not universally valid
      on all architectures, and on ARM and arm64, 'System RAM' may include
      regions for which pfn_valid() returns false.
      
      Generally speaking, both __va() and pfn_to_page() should only ever be
      called on PFNs/physical addresses for which pfn_valid() returns true, so
      add that check to try_ram_remap().
      Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
      Cc: Dan Williams <dan.j.williams@intel.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      ac343e88