- 23 6月, 2006 40 次提交
-
-
由 David Woodhouse 提交于
The tuntap driver allows an admin to create persistent devices and assign ownership of them to individual users. Unfortunately, relaxing the permissions on the /dev/net/tun device node so that they can actually use those devices will _also_ allow those users to create arbitrary new devices of their own. This patch corrects that, and adjusts the recommended permissions for the device node accordingly. Signed-off-By: NDavid Woodhouse <dwmw2@infradead.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Randy Dunlap 提交于
Warning(/var/linsrc/linux-2617-g4//include/linux/skbuff.h:304): No description found for parameter 'dma_cookie' Warning(/var/linsrc/linux-2617-g4//include/net/sock.h:1274): No description found for parameter 'copied_early' Warning(/var/linsrc/linux-2617-g4//net/core/dev.c:3309): No description found for parameter 'chan' Warning(/var/linsrc/linux-2617-g4//net/core/dev.c:3309): No description found for parameter 'event' Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Woodhouse 提交于
The new <linux/dmaengine.h> header shouldn't be included from the !__KERNEL__ portion of tcp.h Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
This patch segments GSO packets received by the IPsec stack. This can happen when a NIC driver injects GSO packets into the stack which are then forwarded to another host. The primary application of this is going to be Xen where its backend driver may inject GSO packets into dom0. Of course this also can be used by other virtualisation schemes such as VMWare or UML since the tap device could be modified to inject GSO packets received through splice. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
This patch adds a generic segmentation offload toggle that can be turned on/off for each net device. For now it only supports in TCPv4. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
This patch adds the GSO implementation for IPv4 TCP. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
This patch adds the infrastructure for generic segmentation offload. The idea is to tap into the potential savings of TSO without hardware support by postponing the allocation of segmented skb's until just before the entry point into the NIC driver. The same structure can be used to support software IPv6 TSO, as well as UFO and segmentation offload for other relevant protocols, e.g., DCCP. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
Having separate fields in sk_buff for TSO/UFO (tso_size/ufo_size) is not going to scale if we add any more segmentation methods (e.g., DCCP). So let's merge them. They were used to tell the protocol of a packet. This function has been subsumed by the new gso_type field. This is essentially a set of netdev feature bits (shifted by 16 bits) that are required to process a specific skb. As such it's easy to tell whether a given device can process a GSO skb: you just have to and the gso_type field and the netdev's features field. I've made gso_type a conjunction. The idea is that you have a base type (e.g., SKB_GSO_TCPV4) that can be modified further to support new features. For example, if we add a hardware TSO type that supports ECN, they would declare NETIF_F_TSO | NETIF_F_TSO_ECN. All TSO packets with CWR set would have a gso_type of SKB_GSO_TCPV4 | SKB_GSO_TCPV4_ECN while all other TSO packets would be SKB_GSO_TCPV4. This means that only the CWR packets need to be emulated in software. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
The dev_deactivate function has bit-rotted since the introduction of lockless drivers. In particular, the spin_unlock_wait call at the end has no effect on the xmit routine of lockless drivers. With a little bit of work, we can make it much more useful by providing the guarantee that when it returns, no more calls to the xmit routine of the underlying driver will be made. The idea is simple. There are two entry points in to the xmit routine. The first comes from dev_queue_xmit. That one is easily stopped by using synchronize_rcu. This works because we set the qdisc to noop_qdisc before the synchronize_rcu call. That in turn causes all subsequent packets sent to dev_queue_xmit to be dropped. The synchronize_rcu call also ensures all outstanding calls leave their critical section. The other entry point is from qdisc_run. Since we now have a bit that indicates whether it's running, all we have to do is to wait until the bit is off. I've removed the loop to wait for __LINK_STATE_SCHED to clear. This is useless because netif_wake_queue can cause it to be set again. It is also harmless because we've disarmed qdisc_run. I've also removed the spin_unlock_wait on xmit_lock because its only purpose of making sure that all outstanding xmit_lock holders have exited is also given by dev_watchdog_down. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki 提交于
We need to update hiscore.rule even if we don't enable CONFIG_IPV6_PRIVACY, because we have more less significant rule; longest match. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Łukasz Stelmach 提交于
Two additional labels (RFC 3484, sec. 10.3) for IPv6 addreses are defined to make a distinction between global unicast addresses and Unique Local Addresses (fc00::/7, RFC 4193) and Teredo (2001::/32, RFC 4380). It is necessary to avoid attempts of connection that would either fail (eg. fec0:: to 2001:feed::) or be sub-optimal (2001:0:: to 2001:feed::). Signed-off-by: NŁukasz Stelmach <stlman@poczta.fm> Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
First of all it is unnecessary to allocate a new skb in skb_pad since the existing one is not shared. More importantly, our hard_start_xmit interface does not allow a new skb to be allocated since that breaks requeueing. This patch uses pskb_expand_head to expand the existing skb and linearize it if needed. Actually, someone should sift through every instance of skb_pad on a non-linear skb as they do not fit the reasons why this was originally created. Incidentally, this fixes a minor bug when the skb is cloned (tcpdump, TCP, etc.). As it is skb_pad will simply write over a cloned skb. Because of the position of the write it is unlikely to cause problems but still it's best if we don't do it. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: [PATCH] Driver core: fix locking issues with the devices that are attached to classes [PATCH] USB: get USB suspend to work again
-
由 Greg Kroah-Hartman 提交于
Doh, that was foolish... Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
Yeah, it's a hack, but it is only temporary until Alan's patches reworking this area make it in. We really should not care what devices below us are doing, especially when we do not really know what type of devices they are. This patch relies on the fact that the endpoint devices do not have a driver assigned to us. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Linus Torvalds 提交于
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-mmc: [ARM] 3565/1: AT91RM9200 MMC update [MMC] Convert all hosts except mmci to use data->blksz
-
由 Linus Torvalds 提交于
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (21 commits) [ARM] 3629/1: S3C24XX: fix missing bracket in regs-dsc.h [ARM] 3537/1: Rework DMA-bounce locking for finer granularity [ARM] 3601/1: i.MX/MX1 DMA error handling for signaled channels only [ARM] 3597/1: ixp4xx/nslu2: Board support for new LED subsystem [ARM] 3595/1: ixp4xx/nas100d: Board support for new LED subsystem [ARM] 3626/1: ARM EABI: fix syscall restarting [ARM] 3628/1: S3C24XX: add get_rate call to struct clk [ARM] 3627/1: S3C24XX: split s3c2410 clocks from core clocks [ARM] 3613/1: S3C2410: Add sysdev and sysclass [ARM] 3624/1: Report true modem control line states [ARM] 3620/2: ixp23xx: add uengine loader support [ARM] 3618/1: add defconfig for logicpd pxa270 card engine [ARM] 3617/1: ep93xx: fix slightly incorrect timer tick rate [ARM] 3616/1: fix timer handler wrap logic for a number of platforms [ARM] 3615/1: ixp23xx: use platform devices for physmap flash [ARM] 3614/1: ep93xx: use platform devices for physmap flash [ARM] 3621/1: fix compilation breakage for pnx4008 [ARM] 3623/1: pnx4008: move GPIO-related defines to gpio.h [ARM] 3622/1: pnx4008: remove clk_use/clk_unuse [ARM] Enable VFP to be built when non-VFP capable CPUs are selected ...
-
由 Linus Torvalds 提交于
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-serial: [ARM] 3600/1: increase amba-pl010 UART_NR to 8 [ARM] 3571/1: netX: serial driver for Hilscher netX
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] Fix ondemand vs suspend deadlock [CPUFREQ] Fix powernow-k8 SMP kernel on UP hardware bug. [PATCH] redirect speedstep-centrino maintainer mail to cpufreq list [CPUFREQ] correct powernow-k8 fid/vid masks for extended parts [CPUFREQ] Clarify powernow-k8 cpu_family statements
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (33 commits) [PATCH] myri10ge - drop workaround pci_save_state() disabling MSI [PATCH] myri10ge - drop workaround for the missing AER ext cap on nVidia CK804 via-velocity: the link is not correctly detected when the device starts [PATCH] add b44 to maintainers [PATCH] WAN: ioremap() failure checks in drivers [PATCH] WAN: register_hdlc_device() doesn't need dev_alloc_name() [PATCH] skb_padto()-area fixes in 8390, wavelan [PATCH] make drivers/net/forcedeth.c:nv_update_pause() static [PATCH] network driver for Hilscher netx [PATCH] Dereference in tokenring/olympic.c [PATCH] Array overrun in drivers/net/wireless/wavelan.c [PATCH] Remove useless check in drivers/net/pcmcia/xirc2ps_cs.c [PATCH] 8139cp: add ethtool eeprom support [PATCH] 8139cp: fix eeprom read command length [PATCH] b44: update b44 Kconfig entry [PATCH] b44: update version to 1.01 [PATCH] b44: add wol for old nic [PATCH] b44: add parameter [PATCH] b44: add wol [PATCH] b44: fix manual speed/duplex/autoneg settings ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (139 commits) [POWERPC] re-enable OProfile for iSeries, using timer interrupt [POWERPC] support ibm,extended-*-frequency properties [POWERPC] Extra sanity check in EEH code [POWERPC] Dont look for class-code in pci children [POWERPC] Fix mdelay badness on shared processor partitions [POWERPC] disable floating point exceptions for init [POWERPC] Unify ppc syscall tables [POWERPC] mpic: add support for serial mode interrupts [POWERPC] pseries: Print PCI slot location code on failure [POWERPC] spufs: one more fix for 64k pages [POWERPC] spufs: fail spu_create with invalid flags [POWERPC] spufs: clear class2 interrupt status before wakeup [POWERPC] spufs: fix Makefile for "make clean" [POWERPC] spufs: remove stop_code from struct spu [POWERPC] spufs: fix spu irq affinity setting [POWERPC] spufs: further abstract priv1 register access [POWERPC] spufs: split the Cell BE support into generic and platform dependant parts [POWERPC] spufs: dont try to access SPE channel 1 count [POWERPC] spufs: use kzalloc in create_spu [POWERPC] spufs: fix initial state of wbox file ... Manually resolved conflicts in: drivers/net/phy/Makefile include/asm-powerpc/spu.h
-
由 Brice Goglin 提交于
We don't need to restore the state right after saving it for later recovery since commit 99dc804d (PCI: disable msi mode in pci_disable_device) now prevents pci_save_state() from disabling MSI. Signed-off-by: NBrice Goglin <brice@myri.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Brice Goglin 提交于
We don't need to hardcode the AER capability of the nVidia CK804 chipset anymore since commit cf34a8e0 (PCI: nVidia quirk to make AER PCI-E extended capability visible) now makes sure that this cap will be available to pci_find_ext_capability(). Signed-off-by: NBrice Goglin <brice@myri.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Gary Zambrano 提交于
Add b44 to the MAINTAINERS file. Signed-off-by: NGary Zambrano <zambrano@broadcom.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Krzysztof Halasa 提交于
Eric Sesterhenn found that pci200syn initialization lacks return statement in ioremap() error path (coverity bug id #195). It looks like more WAN drivers have problems with ioremap(). Signed-off-by: NKrzysztof Halasa <khc@pm.waw.pl> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Krzysztof Halasa 提交于
David Boggs noticed that register_hdlc_device() no longer needs to call dev_alloc_name() as it's called by register_netdev(). register_hdlc_device() is currently equivalent to register_netdev(). hdlc_setup() is now EXPORTed as per David's request. Signed-off-by: NKrzysztof Halasa <khc@pm.waw.pl> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Alan Cox 提交于
Ar Iau, 2006-06-22 am 21:29 +1000, ysgrifennodd Herbert Xu: > Alan Cox <alan@lxorguk.ukuu.org.uk> wrote: > > > > The 8390 change (corrected version) also makes 8390.c faster so should > > be applied anyway, and the orinoco one fixes some code that isn't even > > needed and someone forgot to remove long ago. Otherwise the skb_padto > > Yeah I agree totally. However, I haven't actually seen the fixed 8390 > version being posted yet or at least not to netdev :) Ah the resounding clang of a subtle hint ;) Signed-off-by: NAlan Cox <alan@redhat.com> - Return 8390.c to the old way of handling short packets (which is also faster) - Remove the skb_padto from orinoco. This got left in when the padding bad write patch was added and is actually not needed. This is fixing a merge error way back when. - Wavelan can also use the stack based buffer trick if you want Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Adrian Bunk 提交于
This patch makes the needlessly global nv_update_pause() static. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Sascha Hauer 提交于
This is a patch for the Hilscher netx builtin ethernet ports. The netx board support was merged into 2.6.17-git2. The netx is a arm926 based SoC. Signed-off-by: NRobert Schwebel <r.schwebel@pengutronix.de> Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de> -- drivers/net/Kconfig | 11 drivers/net/Makefile | 1 drivers/net/netx-eth.c | 516 ++++++++++++++++++++++++++++++++++++++++ include/asm-arm/arch-netx/eth.h | 27 ++ 4 files changed, 555 insertions(+) Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Eric Sesterhenn 提交于
hi, coverity found (bug id #225) that we might call free_netdev() with NULL argument, when alloc_trdev() fails. This patch changes the goto, so we dont call free_netdev() for dev == NULL. Signed-off-by: NEric Sesterhenn <snakebyte@gmx.de> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Eric Sesterhenn 提交于
hi, this is another array overrun spotted by coverity (#id 507) we should check the index against array size before using it. Not sure why the driver doesnt use ARRAY_SIZE instead of its own macro. Signed-off-by: NEric Sesterhenn <snakebyte@gmx.de> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Eric Sesterhenn 提交于
hi, coverity choked at this check (id #223), assuming that skb might be NULL and used anyways later. Since start_hard_xmit() always gets called with a valid skb, the check is useless and this patch removes it. Signed-off-by: NEric Sesterhenn <snakebyte@gmx.de> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Philip Craig 提交于
Implement the ethtool eeprom operations for the 8139cp driver. Tested on x86 and big-endian ARM. Signed-off-by: NPhilip Craig <philipc@snapgear.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Philip Craig 提交于
The read command for the 93C46/93C56 EEPROMS should be 3 bits plus the address. This doesn't appear to affect the operation of the read command, but similar errors for write commands do cause failures. Signed-off-by: NPhilip Craig <philipc@snapgear.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Gary Zambrano 提交于
Deleted "EXPERIMENTAL" from b44 entry in Kconfig. Signed-off-by: NGary Zambrano <zambrano@broadcom.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Gary Zambrano 提交于
Update the driver version to 1.01 Signed-off-by: NGary Zambrano <zambrano@broadcom.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Gary Zambrano 提交于
This patch adds wol support for the older 440x nics that use pattern matching. This patch is a redo thanks to feedback from Michael Chan and Francois Romieu. Signed-off-by: NGary Zambrano <zambrano@broadcom.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Gary Zambrano 提交于
This patch adds a parameter to init_hw() to not completely initialize the nic for wol. Signed-off-by: NGary Zambrano <zambrano@broadcom.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Gary Zambrano 提交于
Adds wol to the driver. This is a redo of a previous patch thanks to feedback from Francois Romieu. Signed-off-by Gary Zambrano <zambrano@broadcom.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-