Hierarchical reclaim doesn't swap out if memsw and resource limits are
thye same (memsw_is_minimum == true) because we would hit mem+swap limit
anyway (during hard limit reclaim).

If it comes to the soft limit we shouldn't consider memsw_is_minimum at
all because it doesn't make much sense.  Either the soft limit is bellow
the hard limit and then we cannot hit mem+swap limit or the direct reclaim
takes a precedence.
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: NMichal Hocko <mhocko@suse.cz>
Acked-by: NDaisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The following crash was reported:

> Call Trace:
> [<ffffffff81139792>] mem_cgroup_from_task+0x15/0x17
> [<ffffffff8113a75a>] __mem_cgroup_try_charge+0x148/0x4b4
> [<ffffffff810493f3>] ? need_resched+0x23/0x2d
> [<ffffffff814cbf43>] ? preempt_schedule+0x46/0x4f
> [<ffffffff8113afe8>] mem_cgroup_charge_common+0x9a/0xce
> [<ffffffff8113b6d1>] mem_cgroup_newpage_charge+0x5d/0x5f
> [<ffffffff81134024>] khugepaged+0x5da/0xfaf
> [<ffffffff81078ea0>] ? __init_waitqueue_head+0x4b/0x4b
> [<ffffffff81133a4a>] ? add_mm_counter.constprop.5+0x13/0x13
> [<ffffffff81078625>] kthread+0xa8/0xb0
> [<ffffffff814d13e8>] ? sub_preempt_count+0xa1/0xb4
> [<ffffffff814d5664>] kernel_thread_helper+0x4/0x10
> [<ffffffff814ce858>] ? retint_restore_args+0x13/0x13
> [<ffffffff8107857d>] ? __init_kthread_worker+0x5a/0x5a

What happens is that khugepaged tries to charge a huge page against an mm
whose last possible owner has already exited, and the memory controller
crashes when the stale mm->owner is used to look up the cgroup to charge.

mm->owner has never been set to NULL with the last owner going away, but
nobody cared until khugepaged came along.

Even then it wasn't a problem because the final mmput() on an mm was
forced to acquire and release mmap_sem in write-mode, preventing an
exiting owner to go away while the mmap_sem was held, and until "692e0b35
mm: thp: optimize memcg charge in khugepaged", the memory cgroup charge
was protected by mmap_sem in read-mode.

Instead of going back to relying on the mmap_sem to enforce lifetime of a
task, this patch ensures that mm->owner is properly set to NULL when the
last possible owner is exiting, which the memory controller can handle
just fine.

[akpm@linux-foundation.org: tweak comments]
Signed-off-by: NHugh Dickins <hughd@google.com>
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Reported-by: NHugh Dickins <hughd@google.com>
Reported-by: NDave Jones <davej@redhat.com>
Reviewed-by: NAndrea Arcangeli <aarcange@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 21a3c964 ("memcg: allocate memory cgroup structures in local
nodes") makes page_cgroup allocation as NUMA aware.  But that caused a
problem https://bugzilla.kernel.org/show_bug.cgi?id=36192.

The problem was getting a NID from invalid struct pages, which was not
initialized because it was out-of-node, out of [node_start_pfn,
node_end_pfn)

Now, with sparsemem, page_cgroup_init scans pfn from 0 to max_pfn.  But
this may scan a pfn which is not on any node and can access memmap which
is not initialized.

This makes page_cgroup_init() for SPARSEMEM node aware and remove a code
to get nid from page->flags.  (Then, we'll use valid NID always.)

[akpm@linux-foundation.org: try to fix up comments]
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 406eb0c9 ("memcg: add memory.numastat api for numa
statistics") adds memory.numa_stat file for memory cgroup.  But the file
permissions are wrong.

  [kamezawa@bluextal linux-2.6]$ ls -l /cgroup/memory/A/memory.numa_stat
  ---------- 1 root root 0 Jun  9 18:36 /cgroup/memory/A/memory.numa_stat

This patch fixes the permission as

  [root@bluextal kamezawa]# ls -l /cgroup/memory/A/memory.numa_stat
  -r--r--r-- 1 root root 0 Jun 10 16:49 /cgroup/memory/A/memory.numa_stat
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: NYing Han <yinghan@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Seems when a config option does not have a dependency of the menuconfig,
it messes the display of the rest configs, even if it's a hidden one.
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When 1GB hugepages are allocated on a system, free(1) reports less
available memory than what really is installed in the box.  Also, if the
total size of hugepages allocated on a system is over half of the total
memory size, CommitLimit becomes a negative number.

The problem is that gigantic hugepages (order > MAX_ORDER) can only be
allocated at boot with bootmem, thus its frames are not accounted to
'totalram_pages'.  However, they are accounted to hugetlb_total_pages()

What happens to turn CommitLimit into a negative number is this
calculation, in fs/proc/meminfo.c:

        allowed = ((totalram_pages - hugetlb_total_pages())
                * sysctl_overcommit_ratio / 100) + total_swap_pages;

A similar calculation occurs in __vm_enough_memory() in mm/mmap.c.

Also, every vm statistic which depends on 'totalram_pages' will render
confusing values, as if system were 'missing' some part of its memory.

Impact of this bug:

When gigantic hugepages are allocated and sysctl_overcommit_memory ==
OVERCOMMIT_NEVER.  In a such situation, __vm_enough_memory() goes through
the mentioned 'allowed' calculation and might end up mistakenly returning
-ENOMEM, thus forcing the system to start reclaiming pages earlier than it
would be ususal, and this could cause detrimental impact to overall
system's performance, depending on the workload.

Besides the aforementioned scenario, I can only think of this causing
annoyances with memory reports from /proc/meminfo and free(1).

[akpm@linux-foundation.org: standardize comment layout]
Reported-by: NRuss Anderson <rja@sgi.com>
Signed-off-by: NRafael Aquini <aquini@linux.com>
Acked-by: NRuss Anderson <rja@sgi.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

During memory hotplug we refresh zonelists when we online a page in a new
zone.  It means that the node's zonelist is not initialized until pages
are onlined.  So for example, "nid" passed by MEM_GOING_ONLINE notifier
will point to NODE_DATA(nid) which has no zone fallback list.  Moreover,
if we hot-add cpu-only nodes, alloc_pages() will do no fallback.

This patch makes a zonelist when a new pgdata is available.

Note: in production, at fujitsu, memory should be onlined before cpu
      and our server didn't have any memory-less nodes and had no problems.

      But recent changes in MEM_GOING_ONLINE+page_cgroup
      will access not initialized zonelist of node.
      Anyway, there are memory-less node and we need some care.
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Dave Hansen <dave@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove calibrate_delay_direct()'s KERN_DEBUG printk related to bogomips
calculation as it appears when booting every core on setups with
'ignore_loglevel' which dmesg people scan for possible issues.  As the
message doesn't show very useful information to the widest audience of
kernel boot message gazers, it should be removed.

Introduced by commit d2b46313 ("init/calibrate.c: fix for critical
bogoMIPS intermittent calculation failure").
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>
Cc: Andrew Worsley <amworsley@gmail.com>
Cc: Phil Carmody <ext-phil.2.carmody@nokia.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

On m68k (which doesn't support generic hardirqs yet):

  drivers/w1/masters/ds1wm.c: In function `ds1wm_probe':
  drivers/w1/masters/ds1wm.c: error: implicit declaration of function `irq_set_irq_type'
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Cc: Jean-Franois Dagenais <dagenaisj@sonatest.com>
Cc: Matt Reimer <mreimer@vpop.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NNicolas Kaiser <nikai@nikai.net>
Reviewed-by: NAndrea Arcangeli <aarcange@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add maintainers for the videobuf2 V4L2 driver framework.
Signed-off-by: NPawel Osciak <pawel@osciak.com>
Acked-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 4440673a ("leds: provide helper to register "leds-gpio"
devices") broke the display of the NEW_LEDS menu as it didn't depend on
NEW_LEDS and so made "LED drivers" and "LED Triggers" appear at the same
level as "LED Support" instead of below it as it was before 4440673a.

Moving LEDS_GPIO_REGISTER out of the menuconfig NEW_LEDS fixes this
unintended side effect.
Reported-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We call led_classdev_unregister/led_classdev_register in
asic3_led_remove/asic3_led_probe, thus make LEDS_ASIC3 depend on
LEDS_CLASS.

This patch fixes below build error if LEDS_CLASS is not configured.

    LD      .tmp_vmlinux1
  drivers/built-in.o: In function `asic3_led_remove':
  clkdev.c:(.devexit.text+0x1860): undefined reference to `led_classdev_unregister'
  drivers/built-in.o: In function `asic3_led_probe':
  clkdev.c:(.devinit.text+0xcee8): undefined reference to `led_classdev_register'
  make: *** [.tmp_vmlinux1] Error 1
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Cc: Paul Parsons <lost.distance@yahoo.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Update my email address.  Email will start to the old address bouncing
soon
Signed-off-by: NBalbir Singh <balbir@linux.vnet.ibm.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The "hostname" tool falls back to setting the hostname to "localhost" if
/etc/hostname does not exist.  Distribution init scripts have the same
fallback.  However, if userspace never calls sethostname, such as when
booting with init=/bin/sh, or otherwise booting a minimal system without
the usual init scripts, the default hostname of "(none)" remains,
unhelpfully appearing in various places such as prompts ("root@(none):~#")
and logs.  Furthermore, "(none)" doesn't typically resolve to anything
useful.

Make the default hostname configurable.  This removes the need for the
standard fallback, provides a useful default for systems that never call
sethostname, and makes minimal systems that much more useful with less
configuration.  Distributions could choose to use "localhost" here to
avoid the fallback, while embedded systems may wish to use a specific
target hostname.
Signed-off-by: NJosh Triplett <josh@joshtriplett.org>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Acked-by: NDavid Miller <davem@davemloft.net>
Cc: Serge Hallyn <serue@us.ibm.com>
Cc: Kel Modderman <kel@otaku42.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

BUILD_BUG_ON_ZERO and BUILD_BUG_ON_NULL must return values, even in the
CHECKER case otherwise various users of it become syntactically invalid.
Signed-off-by: NDr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 56de7263 ("mm: compaction: direct compact when a high-order
allocation fails") introduced a check for cc->order == -1 in
compact_finished.  We should continue compacting in that case because
the request came from userspace and there is no particular order to
compact for.  Similar check has been added by 82478fb7 (mm: compaction:
prevent division-by-zero during user-requested compaction) for
compaction_suitable.

The check is, however, done after zone_watermark_ok which uses order as a
right hand argument for shifts.  Not only watermark check is pointless if
we can break out without it but it also uses 1 << -1 which is not well
defined (at least from C standard).  Let's move the -1 check above
zone_watermark_ok.

[minchan.kim@gmail.com> - caught compaction_suitable]
Signed-off-by: NMichal Hocko <mhocko@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Reviewed-by: NMinchan Kim <minchan.kim@gmail.com>
Reviewed-by: NKAMEZAWA Hiroyuki <kamezawa.hioryu@jp.fujitsu.com>
Acked-by: NMel Gorman <mgorman@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Running a ktest.pl test, I hit the following bug on x86_32:

  ------------[ cut here ]------------
  WARNING: at arch/x86/mm/highmem_32.c:81 __kunmap_atomic+0x64/0xc1()
   Hardware name:
  Modules linked in:
  Pid: 93, comm: sh Not tainted 2.6.39-test+ #1
  Call Trace:
   [<c04450da>] warn_slowpath_common+0x7c/0x91
   [<c042f5df>] ? __kunmap_atomic+0x64/0xc1
   [<c042f5df>] ? __kunmap_atomic+0x64/0xc1^M
   [<c0445111>] warn_slowpath_null+0x22/0x24
   [<c042f5df>] __kunmap_atomic+0x64/0xc1
   [<c04d4a22>] unmap_vmas+0x43a/0x4e0
   [<c04d9065>] exit_mmap+0x91/0xd2
   [<c0443057>] mmput+0x43/0xad
   [<c0448358>] exit_mm+0x111/0x119
   [<c044855f>] do_exit+0x1ff/0x5fa
   [<c0454ea2>] ? set_current_blocked+0x3c/0x40
   [<c0454f24>] ? sigprocmask+0x7e/0x8e
   [<c0448b55>] do_group_exit+0x65/0x88
   [<c0448b90>] sys_exit_group+0x18/0x1c
   [<c0c3915f>] sysenter_do_call+0x12/0x38
  ---[ end trace 8055f74ea3c0eb62 ]---

Running a ktest.pl git bisect, found the culprit: commit e303297e
("mm: extended batches for generic mmu_gather")

But although this was the commit triggering the bug, it was not the one
originally responsible for the bug.  That was commit d16dfc55 ("mm:
mmu_gather rework").

The code in zap_pte_range() has something that looks like the following:

	pte =  pte_offset_map_lock(mm, pmd, addr, &ptl);
	do {
		[...]
	} while (pte++, addr += PAGE_SIZE, addr != end);
	pte_unmap_unlock(pte - 1, ptl);

The pte starts off pointing at the first element in the page table
directory that was returned by the pte_offset_map_lock().  When it's done
with the page, pte will be pointing to anything between the next entry and
the first entry of the next page inclusive.  By doing a pte - 1, this puts
the pte back onto the original page, which is all that pte_unmap_unlock()
needs.

In most archs (64 bit), this is not an issue as the pte is ignored in the
pte_unmap_unlock().  But on 32 bit archs, where things may be kmapped, it
is essential that the pte passed to pte_unmap_unlock() resides on the same
page that was given by pte_offest_map_lock().

The problem came in d16dfc55 ("mm: mmu_gather rework") where it introduced
a "break;" from the while loop.  This alone did not seem to easily trigger
the bug.  But the modifications made by e303297e caused that "break;" to
be hit on the first iteration, before the pte++.

The pte not being incremented will now cause pte_unmap_unlock(pte - 1) to
be pointing to the previous page.  This will cause the wrong page to be
unmapped, and also trigger the warning above.

The simple solution is to just save the pointer given by
pte_offset_map_lock() and use it in the unlock.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: NHugh Dickins <hughd@google.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix the wrong `if' condition for the check if the requested timer is
available.

The bitmap avail is used to store if a timer is used already.  test_bit()
is used to check if the requested timer is available.  If a bit in the
avail bitmap is set it means that the timer is available.

The runtime effect would be that allocating a specific timer always fails
(versus telling cs5535_mfgpt_alloc_timer to allocate the first available
timer, which works).
Signed-off-by: NChristian Gmeiner <christian.gmeiner@gmail.com>
Acked-by: NAndres Salomon <dilinger@queued.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In the case of goto err_kzalloc, we should kfree target.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Acked-by: NPratyush Anand <pratyush.anand@st.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Recently, Robert Mueller reported (http://lkml.org/lkml/2010/9/12/236)
that zone_reclaim_mode doesn't work properly on his new NUMA server (Dual
Xeon E5520 + Intel S5520UR MB).  He is using Cyrus IMAPd and it's built on
a very traditional single-process model.

  * a master process which reads config files and manages the other
    process
  * multiple imapd processes, one per connection
  * multiple pop3d processes, one per connection
  * multiple lmtpd processes, one per connection
  * periodical "cleanup" processes.

There are thousands of independent processes.  The problem is, recent
Intel motherboard turn on zone_reclaim_mode by default and traditional
prefork model software don't work well on it.  Unfortunatelly, such models
are still typical even in the 21st century.  We can't ignore them.

This patch raises the zone_reclaim_mode threshold to 30.  30 doesn't have
any specific meaning.  but 20 means that one-hop QPI/Hypertransport and
such relatively cheap 2-4 socket machine are often used for traditional
servers as above.  The intention is that these machines don't use
zone_reclaim_mode.

Note: ia64 and Power have arch specific RECLAIM_DISTANCE definitions.
This patch doesn't change such high-end NUMA machine behavior.

Dave Hansen said:

: I know specifically of pieces of x86 hardware that set the information
: in the BIOS to '21' *specifically* so they'll get the zone_reclaim_mode
: behavior which that implies.
:
: They've done performance testing and run very large and scary benchmarks
: to make sure that they _want_ this turned on.  What this means for them
: is that they'll probably be de-optimized, at least on newer versions of
: the kernel.
:
: If you want to do this for particular systems, maybe _that_'s what we
: should do.  Have a list of specific configurations that need the
: defaults overridden either because they're buggy, or they have an
: unusual hardware configuration not really reflected in the distance
: table.

And later said:

: The original change in the hardware tables was for the benefit of a
: benchmark.  Said benchmark isn't going to get run on mainline until the
: next batch of enterprise distros drops, at which point the hardware where
: this was done will be irrelevant for the benchmark.  I'm sure any new
: hardware will just set this distance to another yet arbitrary value to
: make the kernel do what it wants.  :)
:
: Also, when the hardware got _set_ to this initially, I complained.  So, I
: guess I'm getting my way now, with this patch.  I'm cool with it.
Reported-by: NRobert Mueller <robm@fastmail.fm>
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: NChristoph Lameter <cl@linux.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Reviewed-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Luck, Tony" <tony.luck@intel.com>
Acked-by: NDave Hansen <dave@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Warn about uses of printk_ratelimit() because it uses a global state and
can hide subsequent useful messages.
Signed-off-by: NJoe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Richard Weinberger <richard@nod.at>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix <linux/kmsg_dump.h> when CONFIG_PRINTK is not enabled:

  include/linux/kmsg_dump.h:56: error: 'EINVAL' undeclared (first use in this function)
  include/linux/kmsg_dump.h:61: error: 'EINVAL' undeclared (first use in this function)

Looks like commit 595dd3d8 ("kmsg_dump: fix build for
CONFIG_PRINTK=n") uses EINVAL without having the needed header file(s),
but I'm sure that I build tested that patch also.  oh well.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

[akpm@linux-foundation.org: rework text, fit it into 80-cols]
Signed-off-by: NYing Han <yinghan@google.com>
Reviewed-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: NBalbir Singh <bsingharora@gmail.com>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

While testing for memcg aware swap token, I observed a swap token was
often grabbed an intermittent running process (eg init, auditd) and they
never release a token.

Why?

Some processes (eg init, auditd, audispd) wake up when a process exiting.
And swap token can be get first page-in process when a process exiting
makes no swap token owner.  Thus such above intermittent running process
often get a token.

And currently, swap token priority is only decreased at page fault path.
Then, if the process sleep immediately after to grab swap token, the swap
token priority never be decreased.  That's obviously undesirable.

This patch implement very poor (and lightweight) priority aging.  It only
be affect to the above corner case and doesn't change swap tendency
workload performance (eg multi process qsbench load)
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: NRik van Riel <riel@redhat.com>
Reviewed-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is useful for observing swap token activity.

example output:

             zsh-1845  [000]   598.962716: update_swap_token_priority:
mm=ffff88015eaf7700 old_prio=1 new_prio=0
          memtoy-1830  [001]   602.033900: update_swap_token_priority:
mm=ffff880037a45880 old_prio=947 new_prio=949
          memtoy-1830  [000]   602.041509: update_swap_token_priority:
mm=ffff880037a45880 old_prio=949 new_prio=951
          memtoy-1830  [000]   602.051959: update_swap_token_priority:
mm=ffff880037a45880 old_prio=951 new_prio=953
          memtoy-1830  [000]   602.052188: update_swap_token_priority:
mm=ffff880037a45880 old_prio=953 new_prio=955
          memtoy-1830  [001]   602.427184: put_swap_token:
token_mm=ffff880037a45880
             zsh-1789  [000]   602.427281: replace_swap_token:
old_token_mm=          (null) old_prio=0 new_token_mm=ffff88015eaf7018
new_prio=2
             zsh-1789  [001]   602.433456: update_swap_token_priority:
mm=ffff88015eaf7018 old_prio=2 new_prio=4
             zsh-1789  [000]   602.437613: update_swap_token_priority:
mm=ffff88015eaf7018 old_prio=4 new_prio=6
             zsh-1789  [000]   602.443924: update_swap_token_priority:
mm=ffff88015eaf7018 old_prio=6 new_prio=8
             zsh-1789  [000]   602.451873: update_swap_token_priority:
mm=ffff88015eaf7018 old_prio=8 new_prio=10
             zsh-1789  [001]   602.462639: update_swap_token_priority:
mm=ffff88015eaf7018 old_prio=10 new_prio=12
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Rik van Riel<riel@redhat.com>
Reviewed-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently, memcg reclaim can disable swap token even if the swap token mm
doesn't belong in its memory cgroup.  It's slightly risky.  If an admin
creates very small mem-cgroup and silly guy runs contentious heavy memory
pressure workload, every tasks are going to lose swap token and then
system may become unresponsive.  That's bad.

This patch adds 'memcg' parameter into disable_swap_token().  and if the
parameter doesn't match swap token, VM doesn't disable it.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Rik van Riel<riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Cc: Michael Hennerich <michael.hennerich@analog.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit a8bef8ff ("mm: migration: avoid race between shift_arg_pages()
and rmap_walk() during migration by not migrating temporary stacks")
introduced a BUG_ON() to ensure that VM_STACK_FLAGS and
VM_STACK_INCOMPLETE_SETUP do not overlap.  The check is a compile time
one, so BUILD_BUG_ON is more appropriate.
Signed-off-by: NMichal Hocko <mhocko@suse.cz>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix new kernel-doc warnings in lib/bitmap.c:

  Warning(lib/bitmap.c:596): No description found for parameter 'buf'
  Warning(lib/bitmap.c:596): Excess function parameter 'bp' description in '__bitmap_parselist'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix new kernel-doc warnings in mm/memory.c:

  Warning(mm/memory.c:1327): No description found for parameter 'tlb'
  Warning(mm/memory.c:1327): Excess function parameter 'tlbp' description in 'unmap_vmas'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Johannes noticed the vmstat update is already taken care of by
khugepaged_alloc_hugepage() internally.  The only places that are required
to update the vmstat are the callers of alloc_hugepage (callers of
khugepaged_alloc_hugepage aren't).
Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com>
Reported-by: NJohannes Weiner <jweiner@redhat.com>
Acked-by: NRik van Riel <riel@redhat.com>
Reviewed-by: NMinchan Kim <minchan.kim@gmail.com>
Acked-by: NJohannes Weiner <jweiner@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix kernel-doc warnings in signal.c:

  Warning(kernel/signal.c:2374): No description found for parameter 'nset'
  Warning(kernel/signal.c:2374): Excess function parameter 'set' description in 'sys_rt_sigprocmask'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

[ Also from Ben Hutchings <ben@decadent.org.uk> and Vitaliy Ivanov
  <vitalivanov@gmail.com> ]

Commit 06ae40ce ("x86 idle: EXPORT_SYMBOL(default_idle, pm_idle)
only when APM demands it") removed the export for pm_idle/default_idle
unless the apm module was modularised and CONFIG_APM_CPU_IDLE was set.

But the apm module uses pm_idle/default_idle unconditionally,
CONFIG_APM_CPU_IDLE only affects the bios idle threshold.  Adjust the
export accordingly.

[ Used #ifdef instead of #if defined() as it's shorter, and what both
  Ben and Vitaliy used.. Andy, you're out-voted ;)    - Linus ]
Reported-by: NRandy Dunlap <randy.dunlap@oracle.com>
Acked-by: NJiri Kosina <jkosina@suse.cz>
Acked-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NLen Brown <len.brown@intel.com>
Signed-off-by: NAndy Whitcroft <apw@canonical.com>
Signed-off-by: NVitaliy Ivanov <vitalivanov@gmail.com>
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: use kernel processor defines for conditional optimizations
  m68knommu: create config options for CPU classes
  m68knommu: fix linker script exported name sections

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  TOMOYO: Fix oops in tomoyo_mount_acl().

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/avr32-2.6:
  avr32, exec: remove redundant set_fs(USER_DS)
  avr32: make intc_resume() return void to conform to syscore_ops
  avr32: add some more at91 to cpu.h definition
  avr32: set CONFIG_CC_OPTIMIZE_FOR_SIZE=y for all defconfigs
  avr32/at32ap: fix mapping of platform device id for USART
  avr32: fix use of non-existing portnr variable in at32_map_usart()

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm: Compare only lower 32 bits of framebuffer map offsets
  drm/i915: Don't leak in i915_gem_shmem_pread_slow()
  drm/radeon/kms: do bounds checking for 3D_LOAD_VBPNTR and bump array limit
  drm/radeon/kms: fix mac g5 quirk
  x86/uv/x2apic: update for change in pci bridge handling.
  alpha, drm: Remove obsolete Alpha support in MGA DRM code
  alpha/drm: Cleanup Alpha support in DRM generic code
  savage: remove unnecessary if statement
  drm/radeon: fix GUI idle IH debug statements
  drm/radeon/kms: check modes against max pixel clock
  drm: fix fbs in DRM_IOCTL_MODE_GETRESOURCES ioctl

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] update cifs version to 1.73
  [CIFS] trivial cleanup fscache cFYI and cERROR messages
  cifs: correctly handle NULL tcon pointer in CIFSTCon
  cifs: show sec= option in /proc/mounts
  cifs: don't allow cifs_reconnect to exit with NULL socket pointer
  CIFS: Fix sparse error