Generate asm-x86/cpufeature.h with posix-2008 commands instead of perl.
Signed-off-by: NRob Landley <rob@landley.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Boyer <jwboyer@redhat.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: David Howells <dhowell@redhat.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There is a kernel memory leak observed when the proc file
/proc/fs/fscache/stats is read.

The reason is that in fscache_stats_open, single_open is called and the
respective release function is not called during release.  Hence fix
with correct release function - single_release().

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=57101Signed-off-by: NAnurup m <anurup.m@huawei.com>
Cc: shyju pv <shyju.pv@huawei.com>
Cc: Sanil kumar <sanil.kumar@huawei.com>
Cc: Nataraj m <nataraj.m@huawei.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: David Howells <dhowells@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Removed legacy hw definitions in hw/mmp_ctrl.h.  These definitions are
for earlier soc versions and are not supported in this driver.
Signed-off-by: NZhou Zhu <zzhu3@marvell.com>
Cc: Paul Bolle <pebolle@tiscali.nl>
Cc: Lisa Du <cldu@marvell.com>
Cc: Guoqing Li <ligq@marvell.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove the __init tags from the ep93xxfb_calc_fbsize() and
ep93xxfb_alloc_videomem() functions to fix the section mismatch
warnings.

Use module_platform_driver() to remove the init/exit boilerplate.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ryan Mallon <rmallon@gmail.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use the newly introduced devm_ioremap_resource() instead of
devm_request_and_ioremap() which provides more consistent error
handling.

devm_ioremap_resource() provides its own error messages; so all explicit
error messages can be removed from the failure code paths.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Cc: Donghwa Lee <dh09.lee@samsung.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Reviewed-by: NThierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is the driver for the Hyper-V Synthetic Video, which supports
screen resolution up to Full HD 1920x1080 on Windows Server 2012 host,
and 1600x1200 on Windows Server 2008 R2 or earlier.  It also solves the
double mouse cursor issue of the emulated video mode.
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: NK. Y. Srinivasan <kys@microsoft.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Cc: Olaf Hering <olaf@aepfle.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

With make W=1 we get

  drivers/video/console/fbcon_cw.c: In function `cw_update_attr':
  drivers/video/console/fbcon_cw.c:30:8: warning: variable `t' set but not used [-Wunused-but-set-variable]

fixed by removing as since its used nowhere
Signed-off-by: NDevendra Naga <devendra.aaru@gmail.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Convert the struct i2c_msg initialization to C99 format.  This makes
maintaining and editing the code simpler.  Also helps once other fields
like transferred are added in future.

Thanks to Julia Lawall for automating the conversion.
Signed-off-by: NShubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: Julia Lawall <julia@diku.dk>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

audit_trim_trees() calls get_tree().  If a failure occurs we must call
put_tree().

[akpm@linux-foundation.org: run put_tree() before mutex_lock() for small scalability improvement]
Signed-off-by: NChen Gang <gang.chen@asianux.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In audit_data_to_entry() when a failure occurs we must check and free
the tree and watch to avoid a memory leak.

  test:
    plan:
      test command:
        "auditctl -a exit,always -w /etc -F auid=-1"
        (on fedora17, need modify auditctl to let "-w /etc" has effect)
      running:
        under fedora17 x86_64, 2 CPUs 3.20GHz, 2.5GB RAM.
        let 15 auditctl processes continue running at the same time.
      monitor command:
        watch -d -n 1 "cat /proc/meminfo | awk '{print \$2}' \
          | head -n 4 | xargs \
          | awk '{print \"used \",\$1 - \$2 - \$3 - \$4}'"

    result:
      for original version:
        will use up all memory, within 3 hours.
        kill all auditctl, the memory still does not free.
      for new version (apply this patch):
        after 14 hours later, not find issues.
Signed-off-by: NChen Gang <gang.chen@asianux.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The files which include kernel/audit.h are complied only when
CONFIG_AUDIT is set.

Just like audit_pid, there is no need to surround audit_ever_enabled
with CONFIG_AUDIT.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

audit_enabled has already been exported in include/linux/audit.h.  and
kernel/audit.h includes include/linux/audit.h, no need to export
aduit_enabled again in kernel/audit.h
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We only need to check if kauditd is valid after we start it, if kauditd
is invalid, we will set kauditd_task to NULL.  So next time, we will
start kauditd again.

It means if kauditd_task is not NULL,it must be valid.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In audit_alloc_context() use kzalloc instead of kmalloc+memset.  Also
rename audit_zero_context() to audit_set_context(), to represent it's
inner workings properly.

[akpm@linux-foundation.org: remove audit_set_context() altogether - fold it into its caller]
Signed-off-by: NRakib Mullick <rakib.mullick@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

task_get_live_kthread() looks confusing and unneeded.  It does
get_task_struct() but only kthread_stop() needs this, it can be called
even if the calller doesn't have a reference when we know that this
kthread can't exit until we do kthread_stop().

kthread_park() and kthread_unpark() do not need get_task_struct(), the
callers already have the reference.  And it can not help if we can race
with the exiting kthread anyway, kthread_park() can hang forever in this
case.

Change kthread_park() and kthread_unpark() to use to_live_kthread(),
change kthread_stop() to do get_task_struct() by hand and remove
task_get_live_kthread().
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

"k->vfork_done != NULL" with a barrier() after to_kthread(k) in
task_get_live_kthread(k) looks unclear, and sub-optimal because we load
->vfork_done twice.

All we need is to ensure that we do not return to_kthread(NULL).  Add a
new trivial helper which loads/checks ->vfork_done once, this also looks
more understandable.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull USB patches from Greg Kroah-Hartman:
 "Here's the big USB pull request for 3.10-rc1.

  Lots of USB patches here, the majority being USB gadget changes and
  USB-serial driver cleanups, the rest being ARM build fixes / cleanups,
  and individual driver updates.  We also finally got some chipidea
  fixes, which have been delayed for a number of kernel releases, as the
  maintainer has now reappeared.

  All of these have been in linux-next for a while"

* tag 'usb-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (568 commits)
  USB: ehci-msm: USB_MSM_OTG needs USB_PHY
  USB: OHCI: avoid conflicting platform drivers
  USB: OMAP: ISP1301 needs USB_PHY
  USB: lpc32xx: ISP1301 needs USB_PHY
  USB: ftdi_sio: enable two UART ports on ST Microconnect Lite
  usb: phy: tegra: don't call into tegra-ehci directly
  usb: phy: phy core cannot yet be a module
  USB: Fix initconst in ehci driver
  usb-storage: CY7C68300A chips do not support Cypress ATACB
  USB: serial: option: Added support Olivetti Olicard 145
  USB: ftdi_sio: correct ST Micro Connect Lite PIDs
  ARM: mxs_defconfig: add CONFIG_USB_PHY
  ARM: imx_v6_v7_defconfig: add CONFIG_USB_PHY
  usb: phy: remove exported function from __init section
  usb: gadget: zero: put function instances on unbind
  usb: gadget: f_sourcesink.c: correct a copy-paste misnomer
  usb: gadget: cdc2: fix error return code in cdc_do_config()
  usb: gadget: multi: fix error return code in rndis_do_config()
  usb: gadget: f_obex: fix error return code in obex_bind()
  USB: storage: convert to use module_usb_driver()
  ...

Pull tty/serial driver update from Greg Kroah-Hartman:
 "Here's the big tty/serial driver merge request for 3.10-rc1

  Once again, Jiri has a number of TTY driver fixes and cleanups, and
  Peter Hurley came through with a bunch of ldisc fixes that resolve a
  number of reported issues.  There are some other serial driver
  cleanups as well.

  All of these have been in the linux-next tree for a while"

* tag 'tty-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (117 commits)
  tty/serial/sirf: fix MODULE_DEVICE_TABLE
  serial: mxs: drop superfluous {get|put}_device
  serial: mxs: fix buffer overflow
  ARM: PL011: add support for extended FIFO-size of PL011-r1p5
  serial_core.c: add put_device() after device_find_child()
  tty: Fix unsafe bit ops in tty_throttle_safe/unthrottle_safe
  serial: sccnxp: Replace pdata.init/exit with regulator API
  serial: sccnxp: Do not override device name
  TTY: pty, fix compilation warning
  TTY: rocket, fix compilation warning
  TTY: ircomm: fix DTR being raised on hang up
  TTY: synclinkmp: fix DTR being raised on hang up
  TTY: synclink_gt: fix DTR being raised on hang up
  TTY: synclink: fix DTR being raised on hang up
  serial: 8250_dw: Fix the stub for dw8250_probe_acpi()
  serial: 8250_dw: Convert to devm_ioremap()
  serial: 8250_dw: Set port capabilities based on CPR register
  serial: 8250_dw: Let ACPI code extract the DMA client info
  serial: 8250_dw: Support clk framework also with ACPI
  serial: 8250_dw: Enable runtime PM
  ...

Pull staging driver tree update from Greg Kroah-Hartman:
 "Here's the big staging driver tree update for 3.10-rc1

  This update contains loads of comedi driver cleanups and fixes in
  here, iio updates, android driver changes, and other various staging
  driver cleanups.

  Thanks to some drivers being removed, and the comedi driver cleanups,
  we have removed more code than we added:

   627 files changed, 65145 insertions(+), 76321 deletions(-)

  which is always nice to see.

  All of these have been in linux-next for a while."

* tag 'staging-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (940 commits)
  staging: comedi: ni_labpc: fix legacy driver build
  staging: comedi: das800: cleanup the cio-das802/16 fifo comments
  staging: comedi: das800: rename CamelCase vars in das800_ai_do_cmd()
  staging: comedi: das800: tidy up the private data
  staging: comedi: das800: tidy up das800_interrupt()
  staging: comedi: das800: tidy up das800_ai_insn_read()
  staging: comedi: das800: tidy up das800_di_insn_bits()
  staging: comedi: das800: tidy up das800_do_insn_bits()
  staging: comedi: das800: remove extra divisor calculation call
  staging: comedi: das800: rename {enable,disable}_das800
  staging: comedi: das800: tidy up subdevice init
  staging: comedi: das800: allow attaching without interrupt support
  staging: comedi: das800: interrupts are required for async command support
  staging: comedi: das800: tidy up das800_ai_do_cmdtest()
  staging: comedi: das800: remove 'volatile' on private data variables
  staging: comedi: das800: cleanup the boardinfo
  staging: comedi: das800: cleanup range table declarations
  staging: comedi: das800: introduce das800_ind_{write, read}()
  staging: comedi: das800: remove forward declarations
  staging: comedi: das800: move das800_set_frequency()
  ...

Merge tag 'driver-core-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core update from Greg Kroah-Hartman:
 "Here's the merge request for the driver core tree for 3.10-rc1

  It's pretty small, just a number of driver core and sysfs updates and
  fixes, all of which have been in linux-next for a while now.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fixed conflict in kernel/rtmutex-tester.c, the locking tree had a better
fix for the same sysfs file mode problem.

* tag 'driver-core-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  PM / Runtime: Idle devices asynchronously after probe|release
  driver core: handle user namespaces properly with the uid/gid devtmpfs change
  driver core: devtmpfs: fix compile failure with CONFIG_UIDGID_STRICT_TYPE_CHECKS
  devtmpfs: add base.h include
  driver core: add uid and gid to devtmpfs
  sysfs: check if one entry has been removed before freeing
  sysfs: fix crash_notes_size build warning
  sysfs: fix use after free in case of concurrent read/write and readdir
  rtmutex-tester: fix mode of sysfs files
  Documentation: Add ABI entry for crash_notes and crash_notes_size
  sysfs: Add crash_notes_size to export percpu note size
  driver core: platform_device.h: fix checkpatch errors and warnings
  driver core: platform.c: fix checkpatch errors and warnings
  driver core: warn that platform_driver_probe can not use deferred probing
  sysfs: use atomic_inc_unless_negative in sysfs_get_active
  base: core: WARN() about bogus permissions on device attributes
  device: separate all subsys mutexes

Pull char/misc driver update from Greg Kroah-Hartman:
 "Here's the big char / misc driver update for 3.10-rc1

  A number of various driver updates, the majority being new
  functionality in the MEI driver subsystem (it's now a subsystem, it
  started out just a single driver), extcon updates, memory updates,
  hyper-v updates, and a bunch of other small stuff that doesn't fit in
  any other tree.

  All of these have been in linux-next for a while"

* tag 'char-misc-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (148 commits)
  Tools: hv: Fix a checkpatch warning
  tools: hv: skip iso9660 mounts in hv_vss_daemon
  tools: hv: use FIFREEZE/FITHAW in hv_vss_daemon
  tools: hv: use getmntent in hv_vss_daemon
  Tools: hv: Fix a checkpatch warning
  tools: hv: fix checks for origin of netlink message in hv_vss_daemon
  Tools: hv: fix warnings in hv_vss_daemon
  misc: mark spear13xx-pcie-gadget as broken
  mei: fix krealloc() misuse in in mei_cl_irq_read_msg()
  mei: reduce flow control only for completed messages
  mei: reseting -> resetting
  mei: fix reading large reposnes
  mei: revamp mei_irq_read_client_message function
  mei: revamp mei_amthif_irq_read_message
  mei: revamp hbm state machine
  Revert "drivers/scsi: use module_pcmcia_driver() in pcmcia drivers"
  Revert "scsi: pcmcia: nsp_cs: remove module init/exit function prototypes"
  scsi: pcmcia: nsp_cs: remove module init/exit function prototypes
  mei: wd: fix line over 80 characters
  misc: tsl2550: Use dev_pm_ops
  ...

Pull hwmon update from Guenter Roeck:

 - New drivers for NCT6775, NCT6776, NCT6779, and LM95234.

 - Added support for LTC2974, LTC3883, LM25056, TMP431, TMP432, ADT7310,
   and ADT7320 to existing drivers.

 - Various code cleanups and minor improvements.

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (54 commits)
  hwmon: (nct6775) Fix coding style problems
  hwmon: (nct6775) Constify strings
  hwmon: (tmp401) Add support for TMP432
  hwmon: (tmp401) Add support for update_interval attribute
  hwmon: (tmp401) Reset valid flag when resetting temperature history
  hwmon: (tmp401) Simplification and cleanup
  hwmon: (tmp401) Use sysfs_create_group / sysfs_remove_group
  hwmon: (tmp401) Drop unused defines, use BIT for bit masks
  hwmon: (nct6775) Use ARRAY_SIZE for loops where possible
  documentation: hwmon: Fix typo in documentation/hwmon
  hwmon: (nct6775) Enable both AUXTIN and VIN3 on NCT6776
  hwmon: (ad7314) use spi_get_drvdata() and spi_set_drvdata()
  MAINTAINERS: Add myself as maintainer for the NCT6775 driver
  hwmon: (nct6775) Expand scope of supported chips
  hwmon: (gpio-fan) Use is_visible to determine if attributes should be created
  hwmon: (tmp401) Fix device detection for TMP411B and TMP411C
  hwmon: Add driver for LM95234
  hwmon: (tmp401) Add support for TMP431
  hwmon: (pmbus/lm25066) Add support for LM25056
  hwmon: (pmbus/lm25066) Refactor device specific coefficients
  ...

Pull pinctrl update from Linus Walleij:
 "These are the pinctrl changes for v3.10:

   - Patrice Chotard contributed a new configuration debugfs interface
     and reintroduced fine-grained locking into the core: instead of
     having a "big pinctrl lock" we have a per-controller lock and
     specialized locks for the global controller and pinctrl handle
     lists.

   - Haoijan Zhuang deleted all the PXA and MMP2 pinctrl drivers and
     replaced them with pinctrl-single (which is also used by other
     SoCs) so we are gaining consolidation.  The platform particulars
     now come in through the device tree.

   - Haoijan also added support for generic pin config into the
     pinctrl-single driver which is another big consolidation win.

   - Finally also GPIO ranges are now supported by the pinctrl-single
     driver.

   - Tomasz Figa contributed a new Samsung S3C pinctrl driver, bringing
     more of the older Samsung platforms under the pinctrl umbrella and
     out of arch/arm.

   - Maxime Ripard contributed new Allwinner A10/A13 drivers.

   - Sachin Kamat, Wei Yongjun and Axel Lin did a lot of cleanups."

* tag 'pinctrl-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (66 commits)
  pinctrl: move subsystem mutex to pinctrl_dev struct
  pinctrl/pinconfig: fix misplaced goto
  pinctrl: s3c64xx: Fix build error caused by undefined chained_irq_enter
  pinctrl/pinconfig: add debug interface
  pinctrl: abx500: fix issue when no pdata
  pinctrl: pinctrl-single: add missing double quote
  pinctrl: sunxi: Rename wemac functions to emac
  pinctrl: exynos5440: add gpio interrupt support
  pinctrl: exynos5440: fix probe failure due to missing pin-list in config nodes
  pinctrl: ab8505: Staticize some symbols
  pinctrl: ab8540: Staticize some symbols
  pinctrl: ab9540: Staticize some symbols
  pinctrl: ab8500: Staticize some symbols
  pinctrl: abx500: Staticize some symbols
  pinctrl: Add pinctrl-s3c64xx driver
  pinctrl: samsung: Handle banks with two configuration registers
  pinctrl: samsung: Remove hardcoded register offsets
  pinctrl: samsung: Split pin bank description into two structures
  pinctrl: samsung: Include pinctrl-exynos driver data conditionally
  pinctrl: samsung: Protect bank registers with a spinlock
  ...

Pull fbdev updates from Tomi Valkeinen:

 - use vm_iomap_memory() in various fb drivers to map the fb memory to
   userspace

 - Cleanups for the videomode and display_timing features

 - Updates to vt8500, wm8505 and auo-k190x fb drivers

* tag 'fbdev-for-3.10' of git://gitorious.org/linux-omap-dss2/linux: (36 commits)
  fbdev: fix check for fb_mmap's mmio availability
  fbdev: improve fb_mmap bounds checks
  fbdev/ps3fb: use vm_iomap_memory()
  fbdev/sgivwfb: use vm_iomap_memory()
  fbdev/vermillion: use vm_iomap_memory()
  fbdev/sa1100fb: use vm_iomap_memory()
  fbdev/fb-puv3: use vm_iomap_memory()
  fbdev/controlfb: use vm_iomap_memory()
  fbdev/omapfb: use vm_iomap_memory()
  video: vt8500: fix Kconfig for videomode
  video/s3c: move platform_data out of arch/arm
  video/exynos: remove unnecessary header inclusions
  drivers/video: fsl-diu-fb: add hardware cursor support
  drivers: video: use module_platform_driver_probe()
  ARM: OMAP: remove "config FB_OMAP_CONSISTENT_DMA_SIZE"
  video: wm8505fb: Convert to devm_ioremap_resource()
  AUO-K190x: Add resolutions for portrait displays
  AUO-K190x: add framebuffer rotation support
  AUO-K190x: add a 16bit truecolor mode
  AUO-K190x: make color handling more flexible
  ...

Pull PCI updates from Bjorn Helgaas:
 "PCI changes for the v3.10 merge window:

  PCI device hotplug
   - Remove ACPI PCI subdrivers (Jiang Liu, Myron Stowe)
   - Make acpiphp builtin only, not modular (Jiang Liu)
   - Add acpiphp mutual exclusion (Jiang Liu)

  Power management
   - Skip "PME enabled/disabled" messages when not supported (Rafael
     Wysocki)
   - Fix fallback to PCI_D0 (Rafael Wysocki)

  Miscellaneous
   - Factor quirk_io_region (Yinghai Lu)
   - Cache MSI capability offsets & cleanup (Gavin Shan, Bjorn Helgaas)
   - Clean up EISA resource initialization and logging (Bjorn Helgaas)
   - Fix prototype warnings (Andy Shevchenko, Bjorn Helgaas)
   - MIPS: Initialize of_node before scanning bus (Gabor Juhos)
   - Fix pcibios_get_phb_of_node() declaration "weak" annotation (Gabor
     Juhos)
   - Add MSI INTX_DISABLE quirks for AR8161/AR8162/etc (Xiong Huang)
   - Fix aer_inject return values (Prarit Bhargava)
   - Remove PME/ACPI dependency (Andrew Murray)
   - Use shared PCI_BUS_NUM() and PCI_DEVID() (Shuah Khan)"

* tag 'pci-v3.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (63 commits)
  vfio-pci: Use cached MSI/MSI-X capabilities
  vfio-pci: Use PCI_MSIX_TABLE_BIR, not PCI_MSIX_FLAGS_BIRMASK
  PCI: Remove "extern" from function declarations
  PCI: Use PCI_MSIX_TABLE_BIR, not PCI_MSIX_FLAGS_BIRMASK
  PCI: Drop msi_mask_reg() and remove drivers/pci/msi.h
  PCI: Use msix_table_size() directly, drop multi_msix_capable()
  PCI: Drop msix_table_offset_reg() and msix_pba_offset_reg() macros
  PCI: Drop is_64bit_address() and is_mask_bit_support() macros
  PCI: Drop msi_data_reg() macro
  PCI: Drop msi_lower_address_reg() and msi_upper_address_reg() macros
  PCI: Drop msi_control_reg() macro and use PCI_MSI_FLAGS directly
  PCI: Use cached MSI/MSI-X offsets from dev, not from msi_desc
  PCI: Clean up MSI/MSI-X capability #defines
  PCI: Use cached MSI-X cap while enabling MSI-X
  PCI: Use cached MSI cap while enabling MSI interrupts
  PCI: Remove MSI/MSI-X cap check in pci_msi_check_device()
  PCI: Cache MSI/MSI-X capability offsets in struct pci_dev
  PCI: Use u8, not int, for PM capability offset
  [SCSI] megaraid_sas: Use correct #define for MSI-X capability
  PCI: Remove "extern" from function declarations
  ...

Pull ia64 fixes from Tony Luck:
 "Bundle of miscellaneous ia64 fixes for 3.10 merge window."

* tag 'please-pull-misc-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  Add size restriction to the kdump documentation
  Fix example error_injection_tool
  Fix build error for numa_clear_node() under IA64
  Fix initialization of CMCI/CMCP interrupts
  Change "select DMAR" to "select INTEL_IOMMU"
  Wrong asm register contraints in the kvm implementation
  Wrong asm register contraints in the futex implementation
  Remove cast for kmalloc return value
  Fix kexec oops when iosapic was removed
  iosapic: fix a minor typo in comments
  Add WB/UC check for early_ioremap
  Fix broken fsys_getppid()
  tiocx: check retval from bus_register()

Pull locking changes from Ingo Molnar:
 "The most noticeable change are mutex speedups from Waiman Long, for
  higher loads.  These scalability changes should be most noticeable on
  larger server systems.

  There are also cleanups, fixes and debuggability improvements."

* 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  lockdep: Consolidate bug messages into a single print_lockdep_off() function
  lockdep: Print out additional debugging advice when we hit lockdep BUGs
  mutex: Back out architecture specific check for negative mutex count
  mutex: Queue mutex spinners with MCS lock to reduce cacheline contention
  mutex: Make more scalable by doing less atomic operations
  mutex: Move mutex spinning code from sched/core.c back to mutex.c
  locking/rtmutex/tester: Set correct permissions on sysfs files
  lockdep: Remove unnecessary 'hlock_next' variable

Pull s390 update from Martin Schwidefsky:
 "This is the first batch of s390 patches for the 3.10 merge window.

  Included are some performance enhancements: storage key
  initialization, zero page cache synonyms, system call micro
  optimization and the speedup patches for dasdfmt.  Sebastian managed
  to get rid of the special casing for the console device in the cio
  layer.  And the usual bunch of bug fixes."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (59 commits)
  s390/pci: use pci_scan_root_bus
  s390/scm_blk: fix memleak in init function
  s390/scm_blk: allow more cluster size values
  s390/cio: fix irq statistics
  s390/memory hotplug: prevent offline of active memory increments
  s390: remove small stack config option
  s390: system call path micro optimization
  s390: lowcore stack pointer offsets
  s390/uapi: change struct statfs[64] member types to unsigned values
  s390/pci: return correct dma address for offset > PAGE_SIZE
  s390/ptrace: remove empty ifdefs
  s390/compat: remove ptrace compat definitions from uapi header file
  s390/compat: fix compile error for !COMPAT
  s390/compat: fix compat_sys_statfs() memory corruption
  s390/zcore: Fix HSA copy length for last block
  s390/mm,gmap: segment mapping race
  s390/mm,gmap: implement gmap_translate()
  s390/pci: remove disable_device implementation
  s390/pci: disable per default
  s390/pci: return error after failed pci ops
  ...

Merge tag 'stable/for-linus-3.10-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

Pull Xen updates from Konrad Rzeszutek Wilk:
 "Features:
   - Populate the boot_params with EDD data.
   - Cleanups in the IRQ code.
  Bug-fixes:
   - CPU hotplug offline/online in PVHVM mode.
   - Re-upload processor PM data after ACPI S3 suspend/resume cycle."

And Konrad gets a gold star for sending the pull request early when he
thought he'd be away for the first week of the merge window (but because
of 3.9 dragging out to -rc8 he then re-sent the reminder on the first
day of the merge window anyway)

* tag 'stable/for-linus-3.10-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen: resolve section mismatch warnings in xen-acpi-processor
  xen: Re-upload processor PM data to hypervisor after S3 resume (v2)
  xen/smp: Unifiy some of the PVs and PVHVM offline CPU path
  xen/smp/pvhvm: Don't initialize IRQ_WORKER as we are using the native one.
  xen/spinlock: Disable IRQ spinlock (PV) allocation on PVHVM
  xen/spinlock:  Check against default value of -1 for IRQ line.
  xen/time: Add default value of -1 for IRQ and check for that.
  xen/events: Check that IRQ value passed in is valid.
  xen/time: Fix kasprintf splat when allocating timer%d IRQ line.
  xen/smp/spinlock: Fix leakage of the spinlock interrupt line for every CPU online/offline
  xen/smp: Fix leakage of timer interrupt line for every CPU online/offline.
  xen kconfig: fix select INPUT_XEN_KBDDEV_FRONTEND
  xen: drop tracking of IRQ vector
  x86/xen: populate boot_params with EDD data

Pull ARM SoC fix from Olof Johansson:
 "A late-arriving fix for musb on OMAP4, resolving an issue where the
  musb IP won't be clocked and thus not functional.  Small in scope,
  most of the lines changed is a longish comment."

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: OMAP4: hwmod data: make 'ocp2scp_usb_phy_phy_48m" as the main clock

I think we could just move the full vm_iomap_memory() function into
util.h or similar, but I didn't get any reply from anybody actually
using nommu even to this trivial patch, so I'm not going to touch it any
more than required.

Here's the fairly minimal stub to make the nommu case at least
potentially work.  It doesn't seem like anybody cares, though.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull perf fix from Ingo Molnar:
 "This fix adds missing RCU read protection"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  events: Protect access via task_subsys_state_check()

Merge tag 'omap-for-v3.9-rc6/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

From Tony Lindgren:
One MUSB regression fix that I forgot to send earlier. Without
this MUSB no longer works on omap4 based devices.

* tag 'omap-for-v3.9-rc6/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP4: hwmod data: make 'ocp2scp_usb_phy_phy_48m" as the main clock
Signed-off-by: NOlof Johansson <olof@lixom.net>

Pull media fixes from Mauro Carvalho Chehab:
 "Two driver fixes.

  One avoids reading any file at a system with a cx25821 board
  (fortunately, this is not a common device).  The other one prevents
  reading after a buffer with ISDB-T devices based on mb86a20s."

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] cx25821: do not expose broken video output streams
  [media] mb86a20s: Fix estimate_rate setting

Pull late parisc fixes from Helge Deller:
 "I know it's *very* late in the 3.9 release cycle, but since there
  aren't that many people testing the parisc linux kernel, a few (for
  our port) critical issues just showed up a few days back for the first
  time.

  What's in it?
   - add missing __ucmpdi2 symbol, which is required for btrfs on 32bit
     kernel.
   - change kunmap() macro to static inline function.  This fixes a
     debian/gcc-4.4 build error.
   - add locking when doing PTE updates.  This fixes random userspace
     crashes.
   - disable (optional) -mlong-calls compiler option for modules, else
     modules can't be loaded at runtime.
   - a smart patch by Will Deacon which fixes 64bit put_user() warnings
     on 32bit kernel."

* 'fixes-3.9-late' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: use spin_lock_irqsave/spin_unlock_irqrestore for PTE updates
  parisc: disable -mlong-calls compiler option for kernel modules
  parisc: uaccess: fix compiler warnings caused by __put_user casting
  parisc: Change kunmap macro to static inline function
  parisc: Provide __ucmpdi2 to resolve undefined references in 32 bit builds.

variable_is_present() accesses '__efivars' directly, but when called via
gsmi_init() Michel reports observing the following crash,

  BUG: unable to handle kernel NULL pointer dereference at (null)
  IP: variable_is_present+0x55/0x170
  Call Trace:
    register_efivars+0x106/0x370
    gsmi_init+0x2ad/0x3da
    do_one_initcall+0x3f/0x170

The reason for the crash is that '__efivars' hasn't been initialised nor
has it been registered with register_efivars() by the time the google
EFI SMI driver runs.  The gsmi code uses its own struct efivars, and
therefore, a different variable list.  Fix the above crash by passing
the registered struct efivars to variable_is_present(), so that we
traverse the correct list.
Reported-by: NMichel Lespinasse <walken@google.com>
Tested-by: NMichel Lespinasse <walken@google.com>
Cc: Mike Waychison <mikew@google.com>
Cc: Matthew Garrett <matthew.garrett@nebula.com>
Cc: Seiji Aguchi <seiji.aguchi@hds.com>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This mutex avoids deadlock in case of use of multiple pin
controllers. Before this modification, by using a global
mutex, deadlock appeared when, for example, a call to
pinctrl_pins_show() locked the pinctrl_mutex, called the
ops->pin_dbg_show of a particular pin controller. If this
pin controller needs I2C access to retrieve configuration
information and I2C driver is using pinctrl to drive its
pins, a call to pinctrl_select_state() try to lock again
pinctrl_mutex which leads to a deadlock.

Notice that the mutex grab from the two direction functions
was moved into pinctrl_gpio_direction().

For several cases, we can't replace pinctrl_mutex by
pctldev->mutex, because at this stage, pctldev is
not accessible :
	- pinctrl_get()/pinctrl_put()
	- pinctrl_register_maps()

So add respectively pinctrl_list_mutex and
pinctrl_maps_mutex in order to protect
pinctrl_list and pinctrl_maps list instead.

Reintroduce pinctrldev_list_mutex in
find_pinctrl_by_of_node(),
pinctrl_find_and_add_gpio_range()
pinctrl_request_gpio(), pinctrl_free_gpio(),
pinctrl_gpio_direction(), pinctrl_devices_show(),
pinctrl_register() and pinctrl_unregister() to
protect pinctrldev_list.

Changes v2->v3:
- Fix a missing EXPORT_SYMBOL_GPL() for pinctrl_select_state().

Changes v1->v2:
- pinctrl_select_state_locked() is removed, all lock mechanism
  is located inside pinctrl_select_state(). When parsing
  the state->setting list, take the per-pin-controller driver
  lock. (Patrice).
- Introduce pinctrldev_list_mutex to protect pinctrldev_list
  in all functions which parse or modify pictrldev_list.
  (Patrice).
- move find_pinctrl_by_of_node() from pinctrl/devicetree.c to
  pinctrl/core.c in order to protect pinctrldev_list.
  (Patrice).
- Sink mutex:es into some functions and remove some _locked
  variants down to where the lists are actually accessed to
  make things simpler. (Linus)
- Drop *all* mutexes completely from pinctrl_lookup_state()
  and pinctrl_select_state() - no relevant mutex was taken
  and it was unclear what this was protecting against. (Linus)

Reported by : Seraphin Bonnaffe <seraphin.bonnaffe@stericsson.com>
Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

This update contains a basic fix that went unseen through
test and review.
Signed-off-by: NLaurent Meunier <laurent.meunier@st.com>
Reviewed-by: NPatrice Chotard <patrice.chotard@stericsson.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

In commit b0de59b5 ("TTY: do not update atime/mtime on read/write")
we removed timestamps from tty inodes to fix a security issue and waited
if something breaks.  Well, 'w', the utility to find out logged users
and their inactivity time broke.  It shows that users are inactive since
the time they logged in.

To revert to the old behaviour while still preventing attackers to
guess the password length, we update the timestamps in one-minute
intervals by this patch.
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>