usb: gadget: u_ether: convert into module

u_ether.c has been #include'd by all gadgets which implement
USB Ethernet functions. In order to add configfs support,
the f_ecm.c, f_eem.c, f_ncm.c, f_subset.c, f_rndis.c need to be
converted into modules and must not be #include'd. Consequently,
the u_ether.c needs to be a module too, in a manner similar
to u_serial.c. The resulting module should not take any parameters,
so they are pushed to the current users of it, that is ether.c,
g_ffs.c, multi.c, ncm.c, nokia.c.
Signed-off-by: NAndrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

drivers/usb/gadget/Kconfig

@@ -499,6 +499,9 @@ config USB_F_SS_LB
 config USB_U_SERIAL
 	tristate
 
+config USB_U_ETHER
+	tristate
+
 config USB_F_SERIAL
 	tristate
 
@@ -595,6 +598,7 @@ config USB_ETH
 	tristate "Ethernet Gadget (with CDC Ethernet support)"
 	depends on NET
 	select USB_LIBCOMPOSITE
+	select USB_U_ETHER
 	select CRC32
 	help
 	  This driver implements Ethernet style communication, in one of
@@ -667,6 +671,7 @@ config USB_G_NCM
 	tristate "Network Control Model (NCM) support"
 	depends on NET
 	select USB_LIBCOMPOSITE
+	select USB_U_ETHER
 	select CRC32
 	help
 	  This driver implements USB CDC NCM subclass standard. NCM is
@@ -710,6 +715,7 @@ config USB_FUNCTIONFS
 config USB_FUNCTIONFS_ETH
 	bool "Include configuration with CDC ECM (Ethernet)"
 	depends on USB_FUNCTIONFS && NET
+	select USB_U_ETHER
 	help
 	  Include a configuration with CDC ECM function (Ethernet) and the
 	  Function Filesystem.
@@ -717,6 +723,7 @@ config USB_FUNCTIONFS_ETH
 config USB_FUNCTIONFS_RNDIS
 	bool "Include configuration with RNDIS (Ethernet)"
 	depends on USB_FUNCTIONFS && NET
+	select USB_U_ETHER
 	help
 	  Include a configuration with RNDIS function (Ethernet) and the Filesystem.
 
@@ -817,6 +824,7 @@ config USB_CDC_COMPOSITE
 	depends on NET
 	select USB_LIBCOMPOSITE
 	select USB_U_SERIAL
+	select USB_U_ETHER
 	select USB_F_ACM
 	help
 	  This driver provides two functions in one configuration:
@@ -834,6 +842,7 @@ config USB_G_NOKIA
 	depends on PHONET
 	select USB_LIBCOMPOSITE
 	select USB_U_SERIAL
+	select USB_U_ETHER
 	select USB_F_ACM
 	help
 	  The Nokia composite gadget provides support for acm, obex
@@ -861,6 +870,7 @@ config USB_G_MULTI
 	select USB_G_MULTI_CDC if !USB_G_MULTI_RNDIS
 	select USB_LIBCOMPOSITE
 	select USB_U_SERIAL
+	select USB_U_ETHER
 	select USB_F_ACM
 	help
 	  The Multifunction Composite Gadget provides Ethernet (RNDIS

drivers/usb/gadget/Makefile

@@ -45,6 +45,7 @@ usb_f_serial-y			:= f_serial.o
 obj-$(CONFIG_USB_F_SERIAL)	+= usb_f_serial.o
 usb_f_obex-y			:= f_obex.o
 obj-$(CONFIG_USB_F_OBEX)	+= usb_f_obex.o
+obj-$(CONFIG_USB_U_ETHER)	+= u_ether.o
 
 #
 # USB gadget drivers

drivers/usb/gadget/cdc2.c

@@ -35,6 +35,8 @@
 /*-------------------------------------------------------------------------*/
 USB_GADGET_COMPOSITE_OPTIONS();
 
+USB_ETHERNET_MODULE_PARAMETERS();
+
 /*
  * Kbuild is not very cooperative with respect to linking separately
  * compiled library objects into one module.  So for now we won't use
@@ -43,7 +45,6 @@ USB_GADGET_COMPOSITE_OPTIONS();
  * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
  */
 #include "f_ecm.c"
-#include "u_ether.c"
 
 /*-------------------------------------------------------------------------*/
 
@@ -102,7 +103,7 @@ static struct usb_gadget_strings *dev_strings[] = {
 	NULL,
 };
 
-static u8 hostaddr[ETH_ALEN];
+static u8 host_mac[ETH_ALEN];
 static struct eth_dev *the_dev;
 /*-------------------------------------------------------------------------*/
 static struct usb_function *f_acm;
@@ -120,7 +121,7 @@ static int __init cdc_do_config(struct usb_configuration *c)
 		c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
 	}
 
-	status = ecm_bind_config(c, hostaddr, the_dev);
+	status = ecm_bind_config(c, host_mac, the_dev);
 	if (status < 0)
 		return status;
 
@@ -166,7 +167,8 @@ static int __init cdc_bind(struct usb_composite_dev *cdev)
 	}
 
 	/* set up network link layer */
-	the_dev = gether_setup(cdev->gadget, hostaddr);
+	the_dev = gether_setup(cdev->gadget, dev_addr, host_addr, host_mac,
+			       qmult);
 	if (IS_ERR(the_dev))
 		return PTR_ERR(the_dev);
 

drivers/usb/gadget/ether.c

@@ -107,11 +107,12 @@ static inline bool has_rndis(void)
 #include "rndis.c"
 #endif
 #include "f_eem.c"
-#include "u_ether.c"
 
 /*-------------------------------------------------------------------------*/
 USB_GADGET_COMPOSITE_OPTIONS();
 
+USB_ETHERNET_MODULE_PARAMETERS();
+
 /* DO NOT REUSE THESE IDs with a protocol-incompatible driver!!  Ever!!
  * Instead:  allocate your own, using normal USB-IF procedures.
  */
@@ -206,7 +207,7 @@ static struct usb_gadget_strings *dev_strings[] = {
 	NULL,
 };
 
-static u8 hostaddr[ETH_ALEN];
+static u8 host_mac[ETH_ALEN];
 static struct eth_dev *the_dev;
 /*-------------------------------------------------------------------------*/
 
@@ -224,7 +225,7 @@ static int __init rndis_do_config(struct usb_configuration *c)
 		c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
 	}
 
-	return rndis_bind_config(c, hostaddr, the_dev);
+	return rndis_bind_config(c, host_mac, the_dev);
 }
 
 static struct usb_configuration rndis_config_driver = {
@@ -259,9 +260,9 @@ static int __init eth_do_config(struct usb_configuration *c)
 	if (use_eem)
 		return eem_bind_config(c, the_dev);
 	else if (can_support_ecm(c->cdev->gadget))
-		return ecm_bind_config(c, hostaddr, the_dev);
+		return ecm_bind_config(c, host_mac, the_dev);
 	else
-		return geth_bind_config(c, hostaddr, the_dev);
+		return geth_bind_config(c, host_mac, the_dev);
 }
 
 static struct usb_configuration eth_config_driver = {
@@ -279,7 +280,8 @@ static int __init eth_bind(struct usb_composite_dev *cdev)
 	int			status;
 
 	/* set up network link layer */
-	the_dev = gether_setup(cdev->gadget, hostaddr);
+	the_dev = gether_setup(cdev->gadget, dev_addr, host_addr, host_mac,
+			       qmult);
 	if (IS_ERR(the_dev))
 		return PTR_ERR(the_dev);
 

drivers/usb/gadget/g_ffs.c

@@ -34,9 +34,9 @@
 #    include "f_rndis.c"
 #    include "rndis.c"
 #  endif
-#  include "u_ether.c"
+#  include "u_ether.h"
 
-static u8 gfs_hostaddr[ETH_ALEN];
+static u8 gfs_host_mac[ETH_ALEN];
 static struct eth_dev *the_dev;
 #  ifdef CONFIG_USB_FUNCTIONFS_ETH
 static int eth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN],
@@ -45,7 +45,7 @@ static int eth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN],
 #else
 #  define the_dev	NULL
 #  define gether_cleanup(dev) do { } while (0)
-#  define gfs_hostaddr NULL
+#  define gfs_host_mac NULL
 struct eth_dev;
 #endif
 
@@ -73,6 +73,8 @@ struct gfs_ffs_obj {
 
 USB_GADGET_COMPOSITE_OPTIONS();
 
+USB_ETHERNET_MODULE_PARAMETERS();
+
 static struct usb_device_descriptor gfs_dev_desc = {
 	.bLength		= sizeof gfs_dev_desc,
 	.bDescriptorType	= USB_DT_DEVICE,
@@ -350,7 +352,8 @@ static int gfs_bind(struct usb_composite_dev *cdev)
 	if (missing_funcs)
 		return -ENODEV;
 #if defined CONFIG_USB_FUNCTIONFS_ETH || defined CONFIG_USB_FUNCTIONFS_RNDIS
-	the_dev = gether_setup(cdev->gadget, gfs_hostaddr);
+	the_dev = gether_setup(cdev->gadget, dev_addr, host_addr, gfs_host_mac,
+			       qmult);
 #endif
 	if (IS_ERR(the_dev)) {
 		ret = PTR_ERR(the_dev);
@@ -446,7 +449,7 @@ static int gfs_do_config(struct usb_configuration *c)
 	}
 
 	if (gc->eth) {
-		ret = gc->eth(c, gfs_hostaddr, the_dev);
+		ret = gc->eth(c, gfs_host_mac, the_dev);
 		if (unlikely(ret < 0))
 			return ret;
 	}

drivers/usb/gadget/multi.c

@@ -49,10 +49,12 @@ MODULE_LICENSE("GPL");
 #  include "f_rndis.c"
 #  include "rndis.c"
 #endif
-#include "u_ether.c"
+#include "u_ether.h"
 
 USB_GADGET_COMPOSITE_OPTIONS();
 
+USB_ETHERNET_MODULE_PARAMETERS();
+
 /***************************** Device Descriptor ****************************/
 
 #define MULTI_VENDOR_NUM	0x1d6b	/* Linux Foundation */
@@ -133,7 +135,7 @@ FSG_MODULE_PARAMETERS(/* no prefix */, fsg_mod_data);
 
 static struct fsg_common fsg_common;
 
-static u8 hostaddr[ETH_ALEN];
+static u8 host_mac[ETH_ALEN];
 
 static struct usb_function_instance *fi_acm;
 static struct eth_dev *the_dev;
@@ -152,7 +154,7 @@ static __init int rndis_do_config(struct usb_configuration *c)
 		c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
 	}
 
-	ret = rndis_bind_config(c, hostaddr, the_dev);
+	ret = rndis_bind_config(c, host_mac, the_dev);
 	if (ret < 0)
 		return ret;
 
@@ -216,7 +218,7 @@ static __init int cdc_do_config(struct usb_configuration *c)
 		c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
 	}
 
-	ret = ecm_bind_config(c, hostaddr, the_dev);
+	ret = ecm_bind_config(c, host_mac, the_dev);
 	if (ret < 0)
 		return ret;
 
@@ -280,7 +282,8 @@ static int __ref multi_bind(struct usb_composite_dev *cdev)
 	}
 
 	/* set up network link layer */
-	the_dev = gether_setup(cdev->gadget, hostaddr);
+	the_dev = gether_setup(cdev->gadget, dev_addr, host_addr, host_mac,
+			       qmult);
 	if (IS_ERR(the_dev))
 		return PTR_ERR(the_dev);
 

drivers/usb/gadget/ncm.c

@@ -37,7 +37,6 @@
  * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
  */
 #include "f_ncm.c"
-#include "u_ether.c"
 
 /*-------------------------------------------------------------------------*/
 
@@ -54,6 +53,8 @@
 /*-------------------------------------------------------------------------*/
 USB_GADGET_COMPOSITE_OPTIONS();
 
+USB_ETHERNET_MODULE_PARAMETERS();
+
 static struct usb_device_descriptor device_desc = {
 	.bLength =		sizeof device_desc,
 	.bDescriptorType =	USB_DT_DEVICE,
@@ -112,7 +113,7 @@ static struct usb_gadget_strings *dev_strings[] = {
 };
 
 struct eth_dev *the_dev;
-static u8 hostaddr[ETH_ALEN];
+static u8 host_mac[ETH_ALEN];
 
 /*-------------------------------------------------------------------------*/
 
@@ -125,7 +126,7 @@ static int __init ncm_do_config(struct usb_configuration *c)
 		c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
 	}
 
-	return ncm_bind_config(c, hostaddr, the_dev);
+	return ncm_bind_config(c, host_mac, the_dev);
 }
 
 static struct usb_configuration ncm_config_driver = {
@@ -144,7 +145,8 @@ static int __init gncm_bind(struct usb_composite_dev *cdev)
 	int			status;
 
 	/* set up network link layer */
-	the_dev = gether_setup(cdev->gadget, hostaddr);
+	the_dev = gether_setup(cdev->gadget, dev_addr, host_addr, host_mac,
+			       qmult);
 	if (IS_ERR(the_dev))
 		return PTR_ERR(the_dev);
 

drivers/usb/gadget/nokia.c

@@ -41,11 +41,13 @@
 #include "f_ecm.c"
 #include "f_obex.c"
 #include "f_phonet.c"
-#include "u_ether.c"
+#include "u_ether.h"
 
 /*-------------------------------------------------------------------------*/
 USB_GADGET_COMPOSITE_OPTIONS();
 
+USB_ETHERNET_MODULE_PARAMETERS();
+
 #define NOKIA_VENDOR_ID			0x0421	/* Nokia */
 #define NOKIA_PRODUCT_ID		0x01c8	/* Nokia Gadget */
 
@@ -98,7 +100,7 @@ MODULE_LICENSE("GPL");
 /*-------------------------------------------------------------------------*/
 static struct usb_function *f_acm_cfg1;
 static struct usb_function *f_acm_cfg2;
-static u8 hostaddr[ETH_ALEN];
+static u8 host_mac[ETH_ALEN];
 static struct eth_dev *the_dev;
 
 enum {
@@ -152,7 +154,7 @@ static int __init nokia_bind_config(struct usb_configuration *c)
 	if (status)
 		goto err_conf;
 
-	status = ecm_bind_config(c, hostaddr, the_dev);
+	status = ecm_bind_config(c, host_mac, the_dev);
 	if (status) {
 		pr_debug("could not bind ecm config %d\n", status);
 		goto err_ecm;
@@ -186,7 +188,8 @@ static int __init nokia_bind(struct usb_composite_dev *cdev)
 			goto err_ether;
 	}
 
-	the_dev = gether_setup(cdev->gadget, hostaddr);
+	the_dev = gether_setup(cdev->gadget, dev_addr, host_addr, host_mac,
+			       qmult);
 	if (IS_ERR(the_dev)) {
 		status = PTR_ERR(the_dev);
 		goto err_ether;

drivers/usb/gadget/u_ether.c

@@ -63,6 +63,8 @@ struct eth_dev {
 
 	struct sk_buff_head	rx_frames;
 
+	unsigned		qmult;
+
 	unsigned		header_len;
 	struct sk_buff		*(*wrap)(struct gether *, struct sk_buff *skb);
 	int			(*unwrap)(struct gether *,
@@ -84,12 +86,8 @@ struct eth_dev {
 
 #define DEFAULT_QLEN	2	/* double buffering by default */
 
-static unsigned qmult = 5;
-module_param(qmult, uint, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(qmult, "queue length multiplier at high/super speed");
-
 /* for dual-speed hardware, use deeper queues at high/super speed */
-static inline int qlen(struct usb_gadget *gadget)
+static inline int qlen(struct usb_gadget *gadget, unsigned qmult)
 {
 	if (gadget_is_dualspeed(gadget) && (gadget->speed == USB_SPEED_HIGH ||
 					    gadget->speed == USB_SPEED_SUPER))
@@ -588,7 +586,7 @@ static netdev_tx_t eth_start_xmit(struct sk_buff *skb,
 	if (gadget_is_dualspeed(dev->gadget))
 		req->no_interrupt = (dev->gadget->speed == USB_SPEED_HIGH ||
 				     dev->gadget->speed == USB_SPEED_SUPER)
-			? ((atomic_read(&dev->tx_qlen) % qmult) != 0)
+			? ((atomic_read(&dev->tx_qlen) % dev->qmult) != 0)
 			: 0;
 
 	retval = usb_ep_queue(in, req, GFP_ATOMIC);
@@ -697,16 +695,6 @@ static int eth_stop(struct net_device *net)
 
 /*-------------------------------------------------------------------------*/
 
-/* initial value, changed by "ifconfig usb0 hw ether xx:xx:xx:xx:xx:xx" */
-static char *dev_addr;
-module_param(dev_addr, charp, S_IRUGO);
-MODULE_PARM_DESC(dev_addr, "Device Ethernet Address");
-
-/* this address is invisible to ifconfig */
-static char *host_addr;
-module_param(host_addr, charp, S_IRUGO);
-MODULE_PARM_DESC(host_addr, "Host Ethernet Address");
-
 static int get_ether_addr(const char *str, u8 *dev_addr)
 {
 	if (str) {
@@ -755,8 +743,9 @@ static struct device_type gadget_type = {
  *
  * Returns negative errno, or zero on success
  */
-struct eth_dev *gether_setup_name(struct usb_gadget *g, u8 ethaddr[ETH_ALEN],
-		const char *netname)
+struct eth_dev *gether_setup_name(struct usb_gadget *g,
+		const char *dev_addr, const char *host_addr,
+		u8 ethaddr[ETH_ALEN], unsigned qmult, const char *netname)
 {
 	struct eth_dev		*dev;
 	struct net_device	*net;
@@ -777,6 +766,7 @@ struct eth_dev *gether_setup_name(struct usb_gadget *g, u8 ethaddr[ETH_ALEN],
 
 	/* network device setup */
 	dev->net = net;
+	dev->qmult = qmult;
 	snprintf(net->name, sizeof(net->name), "%s%%d", netname);
 
 	if (get_ether_addr(dev_addr, net->dev_addr))
@@ -815,6 +805,7 @@ struct eth_dev *gether_setup_name(struct usb_gadget *g, u8 ethaddr[ETH_ALEN],
 
 	return dev;
 }
+EXPORT_SYMBOL(gether_setup_name);
 
 /**
  * gether_cleanup - remove Ethernet-over-USB device
@@ -831,6 +822,7 @@ void gether_cleanup(struct eth_dev *dev)
 	flush_work(&dev->work);
 	free_netdev(dev->net);
 }
+EXPORT_SYMBOL(gether_cleanup);
 
 /**
  * gether_connect - notify network layer that USB link is active
@@ -873,11 +865,12 @@ struct net_device *gether_connect(struct gether *link)
 	}
 
 	if (result == 0)
-		result = alloc_requests(dev, link, qlen(dev->gadget));
+		result = alloc_requests(dev, link, qlen(dev->gadget,
+					dev->qmult));
 
 	if (result == 0) {
 		dev->zlp = link->is_zlp_ok;
-		DBG(dev, "qlen %d\n", qlen(dev->gadget));
+		DBG(dev, "qlen %d\n", qlen(dev->gadget, dev->qmult));
 
 		dev->header_len = link->header_len;
 		dev->unwrap = link->unwrap;
@@ -910,6 +903,7 @@ struct net_device *gether_connect(struct gether *link)
 		return ERR_PTR(result);
 	return dev->net;
 }
+EXPORT_SYMBOL(gether_connect);
 
 /**
  * gether_disconnect - notify network layer that USB link is inactive
@@ -980,3 +974,7 @@ void gether_disconnect(struct gether *link)
 	dev->port_usb = NULL;
 	spin_unlock(&dev->lock);
 }
+EXPORT_SYMBOL(gether_disconnect);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Brownell");

drivers/usb/gadget/u_ether.h

@@ -21,6 +21,26 @@
 
 #include "gadget_chips.h"
 
+#define QMULT_DEFAULT 5
+
+/*
+ * dev_addr: initial value
+ * changed by "ifconfig usb0 hw ether xx:xx:xx:xx:xx:xx"
+ * host_addr: this address is invisible to ifconfig
+ */
+#define USB_ETHERNET_MODULE_PARAMETERS() \
+	static unsigned qmult = QMULT_DEFAULT;				\
+	module_param(qmult, uint, S_IRUGO|S_IWUSR);			\
+	MODULE_PARM_DESC(qmult, "queue length multiplier at high/super speed");\
+									\
+	static char *dev_addr;						\
+	module_param(dev_addr, charp, S_IRUGO);				\
+	MODULE_PARM_DESC(dev_addr, "Device Ethernet Address");		\
+									\
+	static char *host_addr;						\
+	module_param(host_addr, charp, S_IRUGO);			\
+	MODULE_PARM_DESC(host_addr, "Host Ethernet Address")
+
 struct eth_dev;
 
 /*
@@ -71,8 +91,9 @@ struct gether {
 			|USB_CDC_PACKET_TYPE_DIRECTED)
 
 /* variant of gether_setup that allows customizing network device name */
-struct eth_dev *gether_setup_name(struct usb_gadget *g, u8 ethaddr[ETH_ALEN],
-		const char *netname);
+struct eth_dev *gether_setup_name(struct usb_gadget *g,
+		const char *dev_addr, const char *host_addr,
+		u8 ethaddr[ETH_ALEN], unsigned qmult, const char *netname);
 
 /* netdev setup/teardown as directed by the gadget driver */
 /* gether_setup - initialize one ethernet-over-usb link
@@ -88,9 +109,10 @@ struct eth_dev *gether_setup_name(struct usb_gadget *g, u8 ethaddr[ETH_ALEN],
  * Returns negative errno, or zero on success
  */
 static inline struct eth_dev *gether_setup(struct usb_gadget *g,
-		u8 ethaddr[ETH_ALEN])
+		const char *dev_addr, const char *host_addr,
+		u8 ethaddr[ETH_ALEN], unsigned qmult)
 {
-	return gether_setup_name(g, ethaddr, "usb");
+	return gether_setup_name(g, dev_addr, host_addr, ethaddr, qmult, "usb");
 }
 
 void gether_cleanup(struct eth_dev *dev);