提交 eb83bbf5 编写于 作者: L Larry Finger 提交者: John W. Linville

rtl8187: Fix error in setting OFDM power settings for RTL8187L

After reports of poor performance, a review of the latest vendor driver
(rtl8187_linux_26.1025.0328.2007) for RTL8187L devices was undertaken.

A difference was found in the code used to index the OFDM power tables. When
the Linux driver was changed, my unit works at a much greater range than
before. I think this fixes Bugzilla #12380 and has been tested by at least
two other users.
Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net>
Tested-by: NMartín Ernesto Barreyro <barreyromartin@gmail.com>
Cc: Stable <stable@kernel.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 e6a27165
...@@ -285,7 +285,10 @@ static void rtl8225_rf_set_tx_power(struct ieee80211_hw *dev, int channel) ...@@ -285,7 +285,10 @@ static void rtl8225_rf_set_tx_power(struct ieee80211_hw *dev, int channel)
ofdm_power = priv->channels[channel - 1].hw_value >> 4; ofdm_power = priv->channels[channel - 1].hw_value >> 4;
cck_power = min(cck_power, (u8)11); cck_power = min(cck_power, (u8)11);
ofdm_power = min(ofdm_power, (u8)35); if (ofdm_power > (u8)15)
ofdm_power = 25;
else
ofdm_power += 10;
rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK, rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK,
rtl8225_tx_gain_cck_ofdm[cck_power / 6] >> 1); rtl8225_tx_gain_cck_ofdm[cck_power / 6] >> 1);
...@@ -536,7 +539,10 @@ static void rtl8225z2_rf_set_tx_power(struct ieee80211_hw *dev, int channel) ...@@ -536,7 +539,10 @@ static void rtl8225z2_rf_set_tx_power(struct ieee80211_hw *dev, int channel)
cck_power += priv->txpwr_base & 0xF; cck_power += priv->txpwr_base & 0xF;
cck_power = min(cck_power, (u8)35); cck_power = min(cck_power, (u8)35);
ofdm_power = min(ofdm_power, (u8)15); if (ofdm_power > (u8)15)
ofdm_power = 25;
else
ofdm_power += 10;
ofdm_power += priv->txpwr_base >> 4; ofdm_power += priv->txpwr_base >> 4;
ofdm_power = min(ofdm_power, (u8)35); ofdm_power = min(ofdm_power, (u8)35);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册