提交 bcd4a1c4 编写于 作者: A Andrzej Pietrasiewicz 提交者: Felipe Balbi

usb: gadget: u_ether: construct with default values and add setters/getters

Add an interface to create a struct netdev_dev filled with default values, an
interface which makes it an interface to fill the struct with useful values and
an interface to read the values set.

The patch also adds an interface to register the net device associated with an
ethernet-over-usb link.
Signed-off-by: NAndrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>
上级 cbbd14a9
......@@ -78,6 +78,7 @@ struct eth_dev {
bool zlp;
u8 host_mac[ETH_ALEN];
u8 dev_mac[ETH_ALEN];
};
/*-------------------------------------------------------------------------*/
......@@ -716,6 +717,17 @@ static int get_ether_addr(const char *str, u8 *dev_addr)
return 1;
}
static int get_ether_addr_str(u8 dev_addr[ETH_ALEN], char *str, int len)
{
if (len < 18)
return -EINVAL;
snprintf(str, len, "%02x:%02x:%02x:%02x:%02x:%02x",
dev_addr[0], dev_addr[1], dev_addr[2],
dev_addr[3], dev_addr[4], dev_addr[5]);
return 18;
}
static const struct net_device_ops eth_netdev_ops = {
.ndo_open = eth_open,
.ndo_stop = eth_stop,
......@@ -796,7 +808,8 @@ struct eth_dev *gether_setup_name(struct usb_gadget *g,
INFO(dev, "MAC %pM\n", net->dev_addr);
INFO(dev, "HOST MAC %pM\n", dev->host_mac);
/* two kinds of host-initiated state changes:
/*
* two kinds of host-initiated state changes:
* - iff DATA transfer is active, carrier is "on"
* - tx queueing enabled if open *and* carrier is "on"
*/
......@@ -807,6 +820,176 @@ struct eth_dev *gether_setup_name(struct usb_gadget *g,
}
EXPORT_SYMBOL(gether_setup_name);
struct net_device *gether_setup_name_default(const char *netname)
{
struct net_device *net;
struct eth_dev *dev;
net = alloc_etherdev(sizeof(*dev));
if (!net)
return ERR_PTR(-ENOMEM);
dev = netdev_priv(net);
spin_lock_init(&dev->lock);
spin_lock_init(&dev->req_lock);
INIT_WORK(&dev->work, eth_work);
INIT_LIST_HEAD(&dev->tx_reqs);
INIT_LIST_HEAD(&dev->rx_reqs);
skb_queue_head_init(&dev->rx_frames);
/* network device setup */
dev->net = net;
dev->qmult = QMULT_DEFAULT;
snprintf(net->name, sizeof(net->name), "%s%%d", netname);
eth_random_addr(dev->dev_mac);
pr_warn("using random %s ethernet address\n", "self");
eth_random_addr(dev->host_mac);
pr_warn("using random %s ethernet address\n", "host");
net->netdev_ops = &eth_netdev_ops;
SET_ETHTOOL_OPS(net, &ops);
SET_NETDEV_DEVTYPE(net, &gadget_type);
return net;
}
EXPORT_SYMBOL(gether_setup_name_default);
int gether_register_netdev(struct net_device *net)
{
struct eth_dev *dev;
struct usb_gadget *g;
struct sockaddr sa;
int status;
if (!net->dev.parent)
return -EINVAL;
dev = netdev_priv(net);
g = dev->gadget;
status = register_netdev(net);
if (status < 0) {
dev_dbg(&g->dev, "register_netdev failed, %d\n", status);
return status;
} else {
INFO(dev, "HOST MAC %pM\n", dev->host_mac);
/* two kinds of host-initiated state changes:
* - iff DATA transfer is active, carrier is "on"
* - tx queueing enabled if open *and* carrier is "on"
*/
netif_carrier_off(net);
}
sa.sa_family = net->type;
memcpy(sa.sa_data, dev->dev_mac, ETH_ALEN);
rtnl_lock();
status = dev_set_mac_address(net, &sa);
rtnl_unlock();
if (status)
pr_warn("cannot set self ethernet address: %d\n", status);
else
INFO(dev, "MAC %pM\n", dev->dev_mac);
return status;
}
EXPORT_SYMBOL(gether_register_netdev);
void gether_set_gadget(struct net_device *net, struct usb_gadget *g)
{
struct eth_dev *dev;
dev = netdev_priv(net);
dev->gadget = g;
SET_NETDEV_DEV(net, &g->dev);
}
EXPORT_SYMBOL(gether_set_gadget);
int gether_set_dev_addr(struct net_device *net, const char *dev_addr)
{
struct eth_dev *dev;
u8 new_addr[ETH_ALEN];
dev = netdev_priv(net);
if (get_ether_addr(dev_addr, new_addr))
return -EINVAL;
memcpy(dev->dev_mac, new_addr, ETH_ALEN);
return 0;
}
EXPORT_SYMBOL(gether_set_dev_addr);
int gether_get_dev_addr(struct net_device *net, char *dev_addr, int len)
{
struct eth_dev *dev;
dev = netdev_priv(net);
return get_ether_addr_str(dev->dev_mac, dev_addr, len);
}
EXPORT_SYMBOL(gether_get_dev_addr);
int gether_set_host_addr(struct net_device *net, const char *host_addr)
{
struct eth_dev *dev;
u8 new_addr[ETH_ALEN];
dev = netdev_priv(net);
if (get_ether_addr(host_addr, new_addr))
return -EINVAL;
memcpy(dev->host_mac, new_addr, ETH_ALEN);
return 0;
}
EXPORT_SYMBOL(gether_set_host_addr);
int gether_get_host_addr(struct net_device *net, char *host_addr, int len)
{
struct eth_dev *dev;
dev = netdev_priv(net);
return get_ether_addr_str(dev->host_mac, host_addr, len);
}
EXPORT_SYMBOL(gether_get_host_addr);
int gether_get_host_addr_cdc(struct net_device *net, char *host_addr, int len)
{
struct eth_dev *dev;
if (len < 13)
return -EINVAL;
dev = netdev_priv(net);
snprintf(host_addr, len, "%pm", dev->host_mac);
return strlen(host_addr);
}
EXPORT_SYMBOL(gether_get_host_addr_cdc);
void gether_set_qmult(struct net_device *net, unsigned qmult)
{
struct eth_dev *dev;
dev = netdev_priv(net);
dev->qmult = qmult;
}
EXPORT_SYMBOL(gether_set_qmult);
unsigned gether_get_qmult(struct net_device *net)
{
struct eth_dev *dev;
dev = netdev_priv(net);
return dev->qmult;
}
EXPORT_SYMBOL(gether_get_qmult);
int gether_get_ifname(struct net_device *net, char *name, int len)
{
rtnl_lock();
strlcpy(name, netdev_name(net), len);
rtnl_unlock();
return strlen(name);
}
EXPORT_SYMBOL(gether_get_ifname);
/**
* gether_cleanup - remove Ethernet-over-USB device
* Context: may sleep
......
......@@ -115,6 +115,129 @@ static inline struct eth_dev *gether_setup(struct usb_gadget *g,
return gether_setup_name(g, dev_addr, host_addr, ethaddr, qmult, "usb");
}
/*
* variant of gether_setup_default that allows customizing
* network device name
*/
struct net_device *gether_setup_name_default(const char *netname);
/*
* gether_register_netdev - register the net device
* @net: net device to register
*
* Registers the net device associated with this ethernet-over-usb link
*
*/
int gether_register_netdev(struct net_device *net);
/* gether_setup_default - initialize one ethernet-over-usb link
* Context: may sleep
*
* This sets up the single network link that may be exported by a
* gadget driver using this framework. The link layer addresses
* are set to random values.
*
* Returns negative errno, or zero on success
*/
static inline struct net_device *gether_setup_default(void)
{
return gether_setup_name_default("usb");
}
/**
* gether_set_gadget - initialize one ethernet-over-usb link with a gadget
* @net: device representing this link
* @g: the gadget to initialize with
*
* This associates one ethernet-over-usb link with a gadget.
*/
void gether_set_gadget(struct net_device *net, struct usb_gadget *g);
/**
* gether_set_dev_addr - initialize an ethernet-over-usb link with eth address
* @net: device representing this link
* @dev_addr: eth address of this device
*
* This sets the device-side Ethernet address of this ethernet-over-usb link
* if dev_addr is correct.
* Returns negative errno if the new address is incorrect.
*/
int gether_set_dev_addr(struct net_device *net, const char *dev_addr);
/**
* gether_get_dev_addr - get an ethernet-over-usb link eth address
* @net: device representing this link
* @dev_addr: place to store device's eth address
* @len: length of the @dev_addr buffer
*
* This gets the device-side Ethernet address of this ethernet-over-usb link.
* Returns zero on success, else negative errno.
*/
int gether_get_dev_addr(struct net_device *net, char *dev_addr, int len);
/**
* gether_set_host_addr - initialize an ethernet-over-usb link with host address
* @net: device representing this link
* @host_addr: eth address of the host
*
* This sets the host-side Ethernet address of this ethernet-over-usb link
* if host_addr is correct.
* Returns negative errno if the new address is incorrect.
*/
int gether_set_host_addr(struct net_device *net, const char *host_addr);
/**
* gether_get_host_addr - get an ethernet-over-usb link host address
* @net: device representing this link
* @host_addr: place to store eth address of the host
* @len: length of the @host_addr buffer
*
* This gets the host-side Ethernet address of this ethernet-over-usb link.
* Returns zero on success, else negative errno.
*/
int gether_get_host_addr(struct net_device *net, char *host_addr, int len);
/**
* gether_get_host_addr_cdc - get an ethernet-over-usb link host address
* @net: device representing this link
* @host_addr: place to store eth address of the host
* @len: length of the @host_addr buffer
*
* This gets the CDC formatted host-side Ethernet address of this
* ethernet-over-usb link.
* Returns zero on success, else negative errno.
*/
int gether_get_host_addr_cdc(struct net_device *net, char *host_addr, int len);
/**
* gether_set_qmult - initialize an ethernet-over-usb link with a multiplier
* @net: device representing this link
* @qmult: queue multiplier
*
* This sets the queue length multiplier of this ethernet-over-usb link.
* For higher speeds use longer queues.
*/
void gether_set_qmult(struct net_device *net, unsigned qmult);
/**
* gether_get_qmult - get an ethernet-over-usb link multiplier
* @net: device representing this link
*
* This gets the queue length multiplier of this ethernet-over-usb link.
*/
unsigned gether_get_qmult(struct net_device *net);
/**
* gether_get_ifname - get an ethernet-over-usb link interface name
* @net: device representing this link
* @name: place to store the interface name
* @len: length of the @name buffer
*
* This gets the interface name of this ethernet-over-usb link.
* Returns zero on success, else negative errno.
*/
int gether_get_ifname(struct net_device *net, char *name, int len);
void gether_cleanup(struct eth_dev *dev);
/* connect/disconnect is handled by individual functions */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册