diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h
index 2a53875cddbf5601ab6da33b89f36caf3e6f8650..f823b8ba5785060e939300397130e290be8543cd 100644
--- a/drivers/net/e1000e/defines.h
+++ b/drivers/net/e1000e/defines.h
@@ -648,6 +648,8 @@
 #define IFE_E_PHY_ID         0x02A80330
 #define IFE_PLUS_E_PHY_ID    0x02A80320
 #define IFE_C_E_PHY_ID       0x02A80310
+#define BME1000_E_PHY_ID     0x01410CB0
+#define BME1000_E_PHY_ID_R2  0x01410CB1
 
 /* M88E1000 Specific Registers */
 #define M88E1000_PHY_SPEC_CTRL     0x10  /* PHY Specific Control Register */
@@ -701,6 +703,14 @@
 #define M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK  0x0E00
 #define M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X    0x0800
 
+/* BME1000 PHY Specific Control Register */
+#define BME1000_PSCR_ENABLE_DOWNSHIFT   0x0800 /* 1 = enable downshift */
+
+
+#define PHY_PAGE_SHIFT 5
+#define PHY_REG(page, reg) (((page) << PHY_PAGE_SHIFT) | \
+                           ((reg) & MAX_PHY_REG_ADDRESS))
+
 /*
  * Bits...
  * 15-5: page
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index 38bfd0d261fee3f272f80415da323311eb8ddf43..d3bc6f8101fa7b90be4455d33821a9901a82d50e 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -127,7 +127,7 @@ struct e1000_buffer {
 		/* arrays of page information for packet split */
 		struct e1000_ps_page *ps_pages;
 	};
-
+	struct page *page;
 };
 
 struct e1000_ring {
@@ -304,6 +304,7 @@ struct e1000_info {
 #define FLAG_HAS_CTRLEXT_ON_LOAD          (1 << 5)
 #define FLAG_HAS_SWSM_ON_LOAD             (1 << 6)
 #define FLAG_HAS_JUMBO_FRAMES             (1 << 7)
+#define FLAG_IS_ICH                       (1 << 9)
 #define FLAG_HAS_SMART_POWER_DOWN         (1 << 11)
 #define FLAG_IS_QUAD_PORT_A               (1 << 12)
 #define FLAG_IS_QUAD_PORT                 (1 << 13)
@@ -386,6 +387,7 @@ extern void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw,
 						 bool state);
 extern void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw);
 extern void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw);
+extern void e1000e_disable_gig_wol_ich8lan(struct e1000_hw *hw);
 
 extern s32 e1000e_check_for_copper_link(struct e1000_hw *hw);
 extern s32 e1000e_check_for_fiber_link(struct e1000_hw *hw);
@@ -443,6 +445,9 @@ extern s32 e1000e_get_phy_info_m88(struct e1000_hw *hw);
 extern s32 e1000e_read_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 *data);
 extern s32 e1000e_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data);
 extern enum e1000_phy_type e1000e_get_phy_type_from_id(u32 phy_id);
+extern s32 e1000e_determine_phy_address(struct e1000_hw *hw);
+extern s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data);
+extern s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data);
 extern void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl);
 extern s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data);
 extern s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data);
diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c
index ce045acce63e99b79685e291a8993e3acd940508..2bb6da057c40de64d936a49f15257490e80493bd 100644
--- a/drivers/net/e1000e/ethtool.c
+++ b/drivers/net/e1000e/ethtool.c
@@ -803,8 +803,7 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
 	/* restore previous status */
 	ew32(STATUS, before);
 
-	if ((mac->type != e1000_ich8lan) &&
-	    (mac->type != e1000_ich9lan)) {
+	if (!(adapter->flags & FLAG_IS_ICH)) {
 		REG_PATTERN_TEST(E1000_FCAL, 0xFFFFFFFF, 0xFFFFFFFF);
 		REG_PATTERN_TEST(E1000_FCAH, 0x0000FFFF, 0xFFFFFFFF);
 		REG_PATTERN_TEST(E1000_FCT, 0x0000FFFF, 0xFFFFFFFF);
@@ -824,15 +823,13 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
 
 	REG_SET_AND_CHECK(E1000_RCTL, 0xFFFFFFFF, 0x00000000);
 
-	before = (((mac->type == e1000_ich8lan) ||
-		   (mac->type == e1000_ich9lan)) ? 0x06C3B33E : 0x06DFB3FE);
+	before = ((adapter->flags & FLAG_IS_ICH) ? 0x06C3B33E : 0x06DFB3FE);
 	REG_SET_AND_CHECK(E1000_RCTL, before, 0x003FFFFB);
 	REG_SET_AND_CHECK(E1000_TCTL, 0xFFFFFFFF, 0x00000000);
 
 	REG_SET_AND_CHECK(E1000_RCTL, before, 0xFFFFFFFF);
 	REG_PATTERN_TEST(E1000_RDBAL, 0xFFFFFFF0, 0xFFFFFFFF);
-	if ((mac->type != e1000_ich8lan) &&
-	    (mac->type != e1000_ich9lan))
+	if (!(adapter->flags & FLAG_IS_ICH))
 		REG_PATTERN_TEST(E1000_TXCW, 0xC000FFFF, 0x0000FFFF);
 	REG_PATTERN_TEST(E1000_TDBAL, 0xFFFFFFF0, 0xFFFFFFFF);
 	REG_PATTERN_TEST(E1000_TIDV, 0x0000FFFF, 0x0000FFFF);
@@ -911,9 +908,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
 
 	/* Test each interrupt */
 	for (i = 0; i < 10; i++) {
-
-		if (((adapter->hw.mac.type == e1000_ich8lan) ||
-		     (adapter->hw.mac.type == e1000_ich9lan)) && i == 8)
+		if ((adapter->flags & FLAG_IS_ICH) && (i == 8))
 			continue;
 
 		/* Interrupt to test */
@@ -1184,6 +1179,7 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
 	struct e1000_hw *hw = &adapter->hw;
 	u32 ctrl_reg = 0;
 	u32 stat_reg = 0;
+	u16 phy_reg = 0;
 
 	hw->mac.autoneg = 0;
 
@@ -1211,6 +1207,28 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
 			     E1000_CTRL_SPD_100 |/* Force Speed to 100 */
 			     E1000_CTRL_FD);	 /* Force Duplex to FULL */
 		break;
+	case e1000_phy_bm:
+		/* Set Default MAC Interface speed to 1GB */
+		e1e_rphy(hw, PHY_REG(2, 21), &phy_reg);
+		phy_reg &= ~0x0007;
+		phy_reg |= 0x006;
+		e1e_wphy(hw, PHY_REG(2, 21), phy_reg);
+		/* Assert SW reset for above settings to take effect */
+		e1000e_commit_phy(hw);
+		mdelay(1);
+		/* Force Full Duplex */
+		e1e_rphy(hw, PHY_REG(769, 16), &phy_reg);
+		e1e_wphy(hw, PHY_REG(769, 16), phy_reg | 0x000C);
+		/* Set Link Up (in force link) */
+		e1e_rphy(hw, PHY_REG(776, 16), &phy_reg);
+		e1e_wphy(hw, PHY_REG(776, 16), phy_reg | 0x0040);
+		/* Force Link */
+		e1e_rphy(hw, PHY_REG(769, 16), &phy_reg);
+		e1e_wphy(hw, PHY_REG(769, 16), phy_reg | 0x0040);
+		/* Set Early Link Enable */
+		e1e_rphy(hw, PHY_REG(769, 20), &phy_reg);
+		e1e_wphy(hw, PHY_REG(769, 20), phy_reg | 0x0400);
+		/* fall through */
 	default:
 		/* force 1000, set loopback */
 		e1e_wphy(hw, PHY_CONTROL, 0x4140);
@@ -1224,8 +1242,7 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
 			     E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */
 			     E1000_CTRL_FD);	 /* Force Duplex to FULL */
 
-		if ((adapter->hw.mac.type == e1000_ich8lan) ||
-		    (adapter->hw.mac.type == e1000_ich9lan))
+		if (adapter->flags & FLAG_IS_ICH)
 			ctrl_reg |= E1000_CTRL_SLU;	/* Set Link Up */
 	}
 
diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h
index a930e6d9cf02bdd34d8beb88d67f84c47d8fb6d1..74f263acb17245c7e9158997c42d663e78fe998a 100644
--- a/drivers/net/e1000e/hw.h
+++ b/drivers/net/e1000e/hw.h
@@ -216,6 +216,21 @@ enum e1e_registers {
 #define IGP01E1000_PHY_LINK_HEALTH	0x13 /* PHY Link Health */
 #define IGP02E1000_PHY_POWER_MGMT	0x19 /* Power Management */
 #define IGP01E1000_PHY_PAGE_SELECT	0x1F /* Page Select */
+#define BM_PHY_PAGE_SELECT		22   /* Page Select for BM */
+#define IGP_PAGE_SHIFT			5
+#define PHY_REG_MASK			0x1F
+
+#define BM_WUC_PAGE			800
+#define BM_WUC_ADDRESS_OPCODE		0x11
+#define BM_WUC_DATA_OPCODE		0x12
+#define BM_WUC_ENABLE_PAGE		769
+#define BM_WUC_ENABLE_REG		17
+#define BM_WUC_ENABLE_BIT		(1 << 2)
+#define BM_WUC_HOST_WU_BIT		(1 << 4)
+
+#define BM_WUC	PHY_REG(BM_WUC_PAGE, 1)
+#define BM_WUFC PHY_REG(BM_WUC_PAGE, 2)
+#define BM_WUS	PHY_REG(BM_WUC_PAGE, 3)
 
 #define IGP01E1000_PHY_PCS_INIT_REG	0x00B4
 #define IGP01E1000_PHY_POLARITY_MASK	0x0078
@@ -331,10 +346,16 @@ enum e1e_registers {
 #define E1000_DEV_ID_ICH8_IFE_G			0x10C5
 #define E1000_DEV_ID_ICH8_IGP_M			0x104D
 #define E1000_DEV_ID_ICH9_IGP_AMT		0x10BD
+#define E1000_DEV_ID_ICH9_IGP_M_AMT		0x10F5
+#define E1000_DEV_ID_ICH9_IGP_M			0x10BF
+#define E1000_DEV_ID_ICH9_IGP_M_V		0x10CB
 #define E1000_DEV_ID_ICH9_IGP_C			0x294C
 #define E1000_DEV_ID_ICH9_IFE			0x10C0
 #define E1000_DEV_ID_ICH9_IFE_GT		0x10C3
 #define E1000_DEV_ID_ICH9_IFE_G			0x10C2
+#define E1000_DEV_ID_ICH10_R_BM_LM		0x10CC
+#define E1000_DEV_ID_ICH10_R_BM_LF		0x10CD
+#define E1000_DEV_ID_ICH10_R_BM_V		0x10CE
 
 #define E1000_FUNC_1 1
 
@@ -378,6 +399,7 @@ enum e1000_phy_type {
 	e1000_phy_gg82563,
 	e1000_phy_igp_3,
 	e1000_phy_ife,
+	e1000_phy_bm,
 };
 
 enum e1000_bus_width {
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index 768485dbb2c6e1ee29e74e122dd295b1495989b0..9e38452a738cc4cd6038cf8829c0ff37787df64e 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -38,6 +38,12 @@
  * 82566DM Gigabit Network Connection
  * 82566MC Gigabit Network Connection
  * 82566MM Gigabit Network Connection
+ * 82567LM Gigabit Network Connection
+ * 82567LF Gigabit Network Connection
+ * 82567LM-2 Gigabit Network Connection
+ * 82567LF-2 Gigabit Network Connection
+ * 82567V-2 Gigabit Network Connection
+ * 82562GT-3 10/100 Network Connection
  */
 
 #include <linux/netdevice.h>
@@ -198,6 +204,19 @@ static s32 e1000_init_phy_params_ich8lan(struct e1000_hw *hw)
 	phy->addr			= 1;
 	phy->reset_delay_us		= 100;
 
+	/*
+	 * We may need to do this twice - once for IGP and if that fails,
+	 * we'll set BM func pointers and try again
+	 */
+	ret_val = e1000e_determine_phy_address(hw);
+	if (ret_val) {
+		hw->phy.ops.write_phy_reg = e1000e_write_phy_reg_bm;
+		hw->phy.ops.read_phy_reg  = e1000e_read_phy_reg_bm;
+		ret_val = e1000e_determine_phy_address(hw);
+		if (ret_val)
+			return ret_val;
+	}
+
 	phy->id = 0;
 	while ((e1000_phy_unknown == e1000e_get_phy_type_from_id(phy->id)) &&
 	       (i++ < 100)) {
@@ -219,6 +238,13 @@ static s32 e1000_init_phy_params_ich8lan(struct e1000_hw *hw)
 		phy->type = e1000_phy_ife;
 		phy->autoneg_mask = E1000_ALL_NOT_GIG;
 		break;
+	case BME1000_E_PHY_ID:
+		phy->type = e1000_phy_bm;
+		phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
+		hw->phy.ops.read_phy_reg = e1000e_read_phy_reg_bm;
+		hw->phy.ops.write_phy_reg = e1000e_write_phy_reg_bm;
+		hw->phy.ops.commit_phy = e1000e_phy_sw_reset;
+		break;
 	default:
 		return -E1000_ERR_PHY;
 		break;
@@ -664,6 +690,7 @@ static s32 e1000_get_phy_info_ich8lan(struct e1000_hw *hw)
 		return e1000_get_phy_info_ife_ich8lan(hw);
 		break;
 	case e1000_phy_igp_3:
+	case e1000_phy_bm:
 		return e1000e_get_phy_info_igp(hw);
 		break;
 	default:
@@ -728,7 +755,7 @@ static s32 e1000_set_d0_lplu_state_ich8lan(struct e1000_hw *hw, bool active)
 	s32 ret_val = 0;
 	u16 data;
 
-	if (phy->type != e1000_phy_igp_3)
+	if (phy->type == e1000_phy_ife)
 		return ret_val;
 
 	phy_ctrl = er32(PHY_CTRL);
@@ -1918,8 +1945,35 @@ static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw)
 		ret_val = e1000e_copper_link_setup_igp(hw);
 		if (ret_val)
 			return ret_val;
+	} else if (hw->phy.type == e1000_phy_bm) {
+		ret_val = e1000e_copper_link_setup_m88(hw);
+		if (ret_val)
+			return ret_val;
 	}
 
+	if (hw->phy.type == e1000_phy_ife) {
+		ret_val = e1e_rphy(hw, IFE_PHY_MDIX_CONTROL, &reg_data);
+		if (ret_val)
+			return ret_val;
+
+		reg_data &= ~IFE_PMC_AUTO_MDIX;
+
+		switch (hw->phy.mdix) {
+		case 1:
+			reg_data &= ~IFE_PMC_FORCE_MDIX;
+			break;
+		case 2:
+			reg_data |= IFE_PMC_FORCE_MDIX;
+			break;
+		case 0:
+		default:
+			reg_data |= IFE_PMC_AUTO_MDIX;
+			break;
+		}
+		ret_val = e1e_wphy(hw, IFE_PHY_MDIX_CONTROL, reg_data);
+		if (ret_val)
+			return ret_val;
+	}
 	return e1000e_setup_copper_link(hw);
 }
 
@@ -2126,6 +2180,31 @@ void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw)
 				       reg_data);
 }
 
+/**
+ *  e1000e_disable_gig_wol_ich8lan - disable gig during WoL
+ *  @hw: pointer to the HW structure
+ *
+ *  During S0 to Sx transition, it is possible the link remains at gig
+ *  instead of negotiating to a lower speed.  Before going to Sx, set
+ *  'LPLU Enabled' and 'Gig Disable' to force link speed negotiation
+ *  to a lower speed.
+ *
+ *  Should only be called for ICH9 devices.
+ **/
+void e1000e_disable_gig_wol_ich8lan(struct e1000_hw *hw)
+{
+	u32 phy_ctrl;
+
+	if (hw->mac.type == e1000_ich9lan) {
+		phy_ctrl = er32(PHY_CTRL);
+		phy_ctrl |= E1000_PHY_CTRL_D0A_LPLU |
+		            E1000_PHY_CTRL_GBE_DISABLE;
+		ew32(PHY_CTRL, phy_ctrl);
+	}
+
+	return;
+}
+
 /**
  *  e1000_cleanup_led_ich8lan - Restore the default LED operation
  *  @hw: pointer to the HW structure
@@ -2247,6 +2326,7 @@ static struct e1000_nvm_operations ich8_nvm_ops = {
 struct e1000_info e1000_ich8_info = {
 	.mac			= e1000_ich8lan,
 	.flags			= FLAG_HAS_WOL
+				  | FLAG_IS_ICH
 				  | FLAG_RX_CSUM_ENABLED
 				  | FLAG_HAS_CTRLEXT_ON_LOAD
 				  | FLAG_HAS_AMT
@@ -2262,6 +2342,7 @@ struct e1000_info e1000_ich8_info = {
 struct e1000_info e1000_ich9_info = {
 	.mac			= e1000_ich9lan,
 	.flags			= FLAG_HAS_JUMBO_FRAMES
+				  | FLAG_IS_ICH
 				  | FLAG_HAS_WOL
 				  | FLAG_RX_CSUM_ENABLED
 				  | FLAG_HAS_CTRLEXT_ON_LOAD
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 8991ab8911e2f506e1d2be85fbad7a7f4a8ad4fb..8cbb40f3a5061cc9287e003543a0fb3c54650e0f 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -43,10 +43,11 @@
 #include <linux/if_vlan.h>
 #include <linux/cpu.h>
 #include <linux/smp.h>
+#include <linux/pm_qos_params.h>
 
 #include "e1000.h"
 
-#define DRV_VERSION "0.2.1"
+#define DRV_VERSION "0.3.3.3-k2"
 char e1000e_driver_name[] = "e1000e";
 const char e1000e_driver_version[] = DRV_VERSION;
 
@@ -340,6 +341,89 @@ static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
 	}
 }
 
+/**
+ * e1000_alloc_jumbo_rx_buffers - Replace used jumbo receive buffers
+ * @adapter: address of board private structure
+ * @rx_ring: pointer to receive ring structure
+ * @cleaned_count: number of buffers to allocate this pass
+ **/
+
+static void e1000_alloc_jumbo_rx_buffers(struct e1000_adapter *adapter,
+                                         int cleaned_count)
+{
+	struct net_device *netdev = adapter->netdev;
+	struct pci_dev *pdev = adapter->pdev;
+	struct e1000_rx_desc *rx_desc;
+	struct e1000_ring *rx_ring = adapter->rx_ring;
+	struct e1000_buffer *buffer_info;
+	struct sk_buff *skb;
+	unsigned int i;
+	unsigned int bufsz = 256 -
+	                     16 /* for skb_reserve */ -
+	                     NET_IP_ALIGN;
+
+	i = rx_ring->next_to_use;
+	buffer_info = &rx_ring->buffer_info[i];
+
+	while (cleaned_count--) {
+		skb = buffer_info->skb;
+		if (skb) {
+			skb_trim(skb, 0);
+			goto check_page;
+		}
+
+		skb = netdev_alloc_skb(netdev, bufsz);
+		if (unlikely(!skb)) {
+			/* Better luck next round */
+			adapter->alloc_rx_buff_failed++;
+			break;
+		}
+
+		/* Make buffer alignment 2 beyond a 16 byte boundary
+		 * this will result in a 16 byte aligned IP header after
+		 * the 14 byte MAC header is removed
+		 */
+		skb_reserve(skb, NET_IP_ALIGN);
+
+		buffer_info->skb = skb;
+check_page:
+		/* allocate a new page if necessary */
+		if (!buffer_info->page) {
+			buffer_info->page = alloc_page(GFP_ATOMIC);
+			if (unlikely(!buffer_info->page)) {
+				adapter->alloc_rx_buff_failed++;
+				break;
+			}
+		}
+
+		if (!buffer_info->dma)
+			buffer_info->dma = pci_map_page(pdev,
+			                                buffer_info->page, 0,
+			                                PAGE_SIZE,
+			                                PCI_DMA_FROMDEVICE);
+
+		rx_desc = E1000_RX_DESC(*rx_ring, i);
+		rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
+
+		if (unlikely(++i == rx_ring->count))
+			i = 0;
+		buffer_info = &rx_ring->buffer_info[i];
+	}
+
+	if (likely(rx_ring->next_to_use != i)) {
+		rx_ring->next_to_use = i;
+		if (unlikely(i-- == 0))
+			i = (rx_ring->count - 1);
+
+		/* Force memory writes to complete before letting h/w
+		 * know there are new descriptors to fetch.  (Only
+		 * applicable for weak-ordered memory model archs,
+		 * such as IA-64). */
+		wmb();
+		writel(i, adapter->hw.hw_addr + rx_ring->tail);
+	}
+}
+
 /**
  * e1000_clean_rx_irq - Send received data up the network stack; legacy
  * @adapter: board private structure
@@ -782,6 +866,186 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
 	return cleaned;
 }
 
+/**
+ * e1000_consume_page - helper function
+ **/
+static void e1000_consume_page(struct e1000_buffer *bi, struct sk_buff *skb,
+                               u16 length)
+{
+	bi->page = NULL;
+	skb->len += length;
+	skb->data_len += length;
+	skb->truesize += length;
+}
+
+/**
+ * e1000_clean_jumbo_rx_irq - Send received data up the network stack; legacy
+ * @adapter: board private structure
+ *
+ * the return value indicates whether actual cleaning was done, there
+ * is no guarantee that everything was cleaned
+ **/
+
+static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
+                                     int *work_done, int work_to_do)
+{
+	struct net_device *netdev = adapter->netdev;
+	struct pci_dev *pdev = adapter->pdev;
+	struct e1000_ring *rx_ring = adapter->rx_ring;
+	struct e1000_rx_desc *rx_desc, *next_rxd;
+	struct e1000_buffer *buffer_info, *next_buffer;
+	u32 length;
+	unsigned int i;
+	int cleaned_count = 0;
+	bool cleaned = false;
+	unsigned int total_rx_bytes=0, total_rx_packets=0;
+
+	i = rx_ring->next_to_clean;
+	rx_desc = E1000_RX_DESC(*rx_ring, i);
+	buffer_info = &rx_ring->buffer_info[i];
+
+	while (rx_desc->status & E1000_RXD_STAT_DD) {
+		struct sk_buff *skb;
+		u8 status;
+
+		if (*work_done >= work_to_do)
+			break;
+		(*work_done)++;
+
+		status = rx_desc->status;
+		skb = buffer_info->skb;
+		buffer_info->skb = NULL;
+
+		++i;
+		if (i == rx_ring->count)
+			i = 0;
+		next_rxd = E1000_RX_DESC(*rx_ring, i);
+		prefetch(next_rxd);
+
+		next_buffer = &rx_ring->buffer_info[i];
+
+		cleaned = true;
+		cleaned_count++;
+		pci_unmap_page(pdev, buffer_info->dma, PAGE_SIZE,
+		               PCI_DMA_FROMDEVICE);
+		buffer_info->dma = 0;
+
+		length = le16_to_cpu(rx_desc->length);
+
+		/* errors is only valid for DD + EOP descriptors */
+		if (unlikely((status & E1000_RXD_STAT_EOP) &&
+		    (rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK))) {
+				/* recycle both page and skb */
+				buffer_info->skb = skb;
+				/* an error means any chain goes out the window
+				 * too */
+				if (rx_ring->rx_skb_top)
+					dev_kfree_skb(rx_ring->rx_skb_top);
+				rx_ring->rx_skb_top = NULL;
+				goto next_desc;
+		}
+
+#define rxtop rx_ring->rx_skb_top
+		if (!(status & E1000_RXD_STAT_EOP)) {
+			/* this descriptor is only the beginning (or middle) */
+			if (!rxtop) {
+				/* this is the beginning of a chain */
+				rxtop = skb;
+				skb_fill_page_desc(rxtop, 0, buffer_info->page,
+				                   0, length);
+			} else {
+				/* this is the middle of a chain */
+				skb_fill_page_desc(rxtop,
+				    skb_shinfo(rxtop)->nr_frags,
+				    buffer_info->page, 0, length);
+				/* re-use the skb, only consumed the page */
+				buffer_info->skb = skb;
+			}
+			e1000_consume_page(buffer_info, rxtop, length);
+			goto next_desc;
+		} else {
+			if (rxtop) {
+				/* end of the chain */
+				skb_fill_page_desc(rxtop,
+				    skb_shinfo(rxtop)->nr_frags,
+				    buffer_info->page, 0, length);
+				/* re-use the current skb, we only consumed the
+				 * page */
+				buffer_info->skb = skb;
+				skb = rxtop;
+				rxtop = NULL;
+				e1000_consume_page(buffer_info, skb, length);
+			} else {
+				/* no chain, got EOP, this buf is the packet
+				 * copybreak to save the put_page/alloc_page */
+				if (length <= copybreak &&
+				    skb_tailroom(skb) >= length) {
+					u8 *vaddr;
+					vaddr = kmap_atomic(buffer_info->page,
+					                   KM_SKB_DATA_SOFTIRQ);
+					memcpy(skb_tail_pointer(skb), vaddr,
+					       length);
+					kunmap_atomic(vaddr,
+					              KM_SKB_DATA_SOFTIRQ);
+					/* re-use the page, so don't erase
+					 * buffer_info->page */
+					skb_put(skb, length);
+				} else {
+					skb_fill_page_desc(skb, 0,
+					                   buffer_info->page, 0,
+				                           length);
+					e1000_consume_page(buffer_info, skb,
+					                   length);
+				}
+			}
+		}
+
+		/* Receive Checksum Offload XXX recompute due to CRC strip? */
+		e1000_rx_checksum(adapter,
+		                  (u32)(status) |
+		                  ((u32)(rx_desc->errors) << 24),
+		                  le16_to_cpu(rx_desc->csum), skb);
+
+		/* probably a little skewed due to removing CRC */
+		total_rx_bytes += skb->len;
+		total_rx_packets++;
+
+		/* eth type trans needs skb->data to point to something */
+		if (!pskb_may_pull(skb, ETH_HLEN)) {
+			ndev_err(netdev, "pskb_may_pull failed.\n");
+			dev_kfree_skb(skb);
+			goto next_desc;
+		}
+
+		e1000_receive_skb(adapter, netdev, skb, status,
+		                  rx_desc->special);
+
+next_desc:
+		rx_desc->status = 0;
+
+		/* return some buffers to hardware, one at a time is too slow */
+		if (unlikely(cleaned_count >= E1000_RX_BUFFER_WRITE)) {
+			adapter->alloc_rx_buf(adapter, cleaned_count);
+			cleaned_count = 0;
+		}
+
+		/* use prefetched values */
+		rx_desc = next_rxd;
+		buffer_info = next_buffer;
+	}
+	rx_ring->next_to_clean = i;
+
+	cleaned_count = e1000_desc_unused(rx_ring);
+	if (cleaned_count)
+		adapter->alloc_rx_buf(adapter, cleaned_count);
+
+	adapter->total_rx_bytes += total_rx_bytes;
+	adapter->total_rx_packets += total_rx_packets;
+	adapter->net_stats.rx_bytes += total_rx_bytes;
+	adapter->net_stats.rx_packets += total_rx_packets;
+	return cleaned;
+}
+
 /**
  * e1000_clean_rx_ring - Free Rx Buffers per Queue
  * @adapter: board private structure
@@ -802,6 +1066,10 @@ static void e1000_clean_rx_ring(struct e1000_adapter *adapter)
 				pci_unmap_single(pdev, buffer_info->dma,
 						 adapter->rx_buffer_len,
 						 PCI_DMA_FROMDEVICE);
+			else if (adapter->clean_rx == e1000_clean_jumbo_rx_irq)
+				pci_unmap_page(pdev, buffer_info->dma,
+				               PAGE_SIZE,
+				               PCI_DMA_FROMDEVICE);
 			else if (adapter->clean_rx == e1000_clean_rx_irq_ps)
 				pci_unmap_single(pdev, buffer_info->dma,
 						 adapter->rx_ps_bsize0,
@@ -809,6 +1077,11 @@ static void e1000_clean_rx_ring(struct e1000_adapter *adapter)
 			buffer_info->dma = 0;
 		}
 
+		if (buffer_info->page) {
+			put_page(buffer_info->page);
+			buffer_info->page = NULL;
+		}
+
 		if (buffer_info->skb) {
 			dev_kfree_skb(buffer_info->skb);
 			buffer_info->skb = NULL;
@@ -1755,10 +2028,12 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter)
 	 * a lot of memory, since we allocate 3 pages at all times
 	 * per packet.
 	 */
-	adapter->rx_ps_pages = 0;
 	pages = PAGE_USE_COUNT(adapter->netdev->mtu);
-	if ((pages <= 3) && (PAGE_SIZE <= 16384) && (rctl & E1000_RCTL_LPE))
+	if (!(adapter->flags & FLAG_IS_ICH) && (pages <= 3) &&
+	    (PAGE_SIZE <= 16384) && (rctl & E1000_RCTL_LPE))
 		adapter->rx_ps_pages = pages;
+	else
+		adapter->rx_ps_pages = 0;
 
 	if (adapter->rx_ps_pages) {
 		/* Configure extra packet-split registers */
@@ -1819,9 +2094,12 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
 			sizeof(union e1000_rx_desc_packet_split);
 		adapter->clean_rx = e1000_clean_rx_irq_ps;
 		adapter->alloc_rx_buf = e1000_alloc_rx_buffers_ps;
+	} else if (adapter->netdev->mtu > ETH_FRAME_LEN + ETH_FCS_LEN) {
+		rdlen = rx_ring->count * sizeof(struct e1000_rx_desc);
+		adapter->clean_rx = e1000_clean_jumbo_rx_irq;
+		adapter->alloc_rx_buf = e1000_alloc_jumbo_rx_buffers;
 	} else {
-		rdlen = rx_ring->count *
-			sizeof(struct e1000_rx_desc);
+		rdlen = rx_ring->count * sizeof(struct e1000_rx_desc);
 		adapter->clean_rx = e1000_clean_rx_irq;
 		adapter->alloc_rx_buf = e1000_alloc_rx_buffers;
 	}
@@ -1885,8 +2163,21 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
 	 * units), e.g. using jumbo frames when setting to E1000_ERT_2048
 	 */
 	if ((adapter->flags & FLAG_HAS_ERT) &&
-	    (adapter->netdev->mtu > ETH_DATA_LEN))
-		ew32(ERT, E1000_ERT_2048);
+	    (adapter->netdev->mtu > ETH_DATA_LEN)) {
+		u32 rxdctl = er32(RXDCTL(0));
+		ew32(RXDCTL(0), rxdctl | 0x3);
+		ew32(ERT, E1000_ERT_2048 | (1 << 13));
+		/*
+		 * With jumbo frames and early-receive enabled, excessive
+		 * C4->C2 latencies result in dropped transactions.
+		 */
+		pm_qos_update_requirement(PM_QOS_CPU_DMA_LATENCY,
+					  e1000e_driver_name, 55);
+	} else {
+		pm_qos_update_requirement(PM_QOS_CPU_DMA_LATENCY,
+					  e1000e_driver_name,
+					  PM_QOS_DEFAULT_VALUE);
+	}
 
 	/* Enable Receives */
 	ew32(RCTL, rctl);
@@ -2155,6 +2446,14 @@ void e1000e_reset(struct e1000_adapter *adapter)
 
 	/* Allow time for pending master requests to run */
 	mac->ops.reset_hw(hw);
+
+	/*
+	 * For parts with AMT enabled, let the firmware know
+	 * that the network interface is in control
+	 */
+	if ((adapter->flags & FLAG_HAS_AMT) && e1000e_check_mng_mode(hw))
+		e1000_get_hw_control(adapter);
+
 	ew32(WUC, 0);
 
 	if (mac->ops.init_hw(hw))
@@ -3469,6 +3768,8 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
 	 * means we reserve 2 more, this pushes us to allocate from the next
 	 * larger slab size.
 	 * i.e. RXBUFFER_2048 --> size-4096 slab
+	 * However with the new *_jumbo_rx* routines, jumbo receives will use
+	 * fragmented skbs
 	 */
 
 	if (max_frame <= 256)
@@ -3626,6 +3927,9 @@ static int e1000_suspend(struct pci_dev *pdev, pm_message_t state)
 			ew32(CTRL_EXT, ctrl_ext);
 		}
 
+		if (adapter->flags & FLAG_IS_ICH)
+			e1000e_disable_gig_wol_ich8lan(&adapter->hw);
+
 		/* Allow time for pending master requests to run */
 		e1000e_disable_pcie_master(&adapter->hw);
 
@@ -4292,6 +4596,13 @@ static struct pci_device_id e1000_pci_tbl[] = {
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE_GT), board_ich9lan },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_AMT), board_ich9lan },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_C), board_ich9lan },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M), board_ich9lan },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M_AMT), board_ich9lan },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M_V), board_ich9lan },
+
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_LM), board_ich9lan },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_LF), board_ich9lan },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_V), board_ich9lan },
 
 	{ }	/* terminate list */
 };
@@ -4326,7 +4637,9 @@ static int __init e1000_init_module(void)
 	printk(KERN_INFO "%s: Copyright (c) 1999-2008 Intel Corporation.\n",
 	       e1000e_driver_name);
 	ret = pci_register_driver(&e1000_driver);
-
+	pm_qos_add_requirement(PM_QOS_CPU_DMA_LATENCY, e1000e_driver_name,
+			       PM_QOS_DEFAULT_VALUE);
+				
 	return ret;
 }
 module_init(e1000_init_module);
@@ -4340,6 +4653,7 @@ module_init(e1000_init_module);
 static void __exit e1000_exit_module(void)
 {
 	pci_unregister_driver(&e1000_driver);
+	pm_qos_remove_requirement(PM_QOS_CPU_DMA_LATENCY, e1000e_driver_name);
 }
 module_exit(e1000_exit_module);
 
diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c
index e102332a6beed4e49588f2c37063a0429fef85f8..b133dcf0e950e9d8067df175ba75e4b461bef250 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -34,6 +34,9 @@ static s32 e1000_get_phy_cfg_done(struct e1000_hw *hw);
 static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw);
 static s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active);
 static s32 e1000_wait_autoneg(struct e1000_hw *hw);
+static u32 e1000_get_phy_addr_for_bm_page(u32 page, u32 reg);
+static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
+					  u16 *data, bool read);
 
 /* Cable length tables */
 static const u16 e1000_m88_cable_length_table[] =
@@ -465,6 +468,10 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw)
 	if (phy->disable_polarity_correction == 1)
 		phy_data |= M88E1000_PSCR_POLARITY_REVERSAL;
 
+	/* Enable downshift on BM (disabled by default) */
+	if (phy->type == e1000_phy_bm)
+		phy_data |= BME1000_PSCR_ENABLE_DOWNSHIFT;
+
 	ret_val = e1e_wphy(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
 	if (ret_val)
 		return ret_val;
@@ -1776,6 +1783,10 @@ enum e1000_phy_type e1000e_get_phy_type_from_id(u32 phy_id)
 	case IFE_C_E_PHY_ID:
 		phy_type = e1000_phy_ife;
 		break;
+	case BME1000_E_PHY_ID:
+	case BME1000_E_PHY_ID_R2:
+		phy_type = e1000_phy_bm;
+		break;
 	default:
 		phy_type = e1000_phy_unknown;
 		break;
@@ -1783,6 +1794,273 @@ enum e1000_phy_type e1000e_get_phy_type_from_id(u32 phy_id)
 	return phy_type;
 }
 
+/**
+ *  e1000e_determine_phy_address - Determines PHY address.
+ *  @hw: pointer to the HW structure
+ *
+ *  This uses a trial and error method to loop through possible PHY
+ *  addresses. It tests each by reading the PHY ID registers and
+ *  checking for a match.
+ **/
+s32 e1000e_determine_phy_address(struct e1000_hw *hw)
+{
+	s32 ret_val = -E1000_ERR_PHY_TYPE;
+	u32 phy_addr= 0;
+	u32 i = 0;
+	enum e1000_phy_type phy_type = e1000_phy_unknown;
+
+	do {
+		for (phy_addr = 0; phy_addr < 4; phy_addr++) {
+			hw->phy.addr = phy_addr;
+			e1000e_get_phy_id(hw);
+			phy_type = e1000e_get_phy_type_from_id(hw->phy.id);
+
+			/* 
+			 * If phy_type is valid, break - we found our
+			 * PHY address
+			 */
+			if (phy_type  != e1000_phy_unknown) {
+				ret_val = 0;
+				break;
+			}
+		}
+		i++;
+	} while ((ret_val != 0) && (i < 100));
+
+	return ret_val;
+}
+
+/**
+ *  e1000_get_phy_addr_for_bm_page - Retrieve PHY page address
+ *  @page: page to access
+ *
+ *  Returns the phy address for the page requested.
+ **/
+static u32 e1000_get_phy_addr_for_bm_page(u32 page, u32 reg)
+{
+	u32 phy_addr = 2;
+
+	if ((page >= 768) || (page == 0 && reg == 25) || (reg == 31))
+		phy_addr = 1;
+
+	return phy_addr;
+}
+
+/**
+ *  e1000e_write_phy_reg_bm - Write BM PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write at register offset
+ *
+ *  Acquires semaphore, if necessary, then writes the data to PHY register
+ *  at the offset.  Release any acquired semaphores before exiting.
+ **/
+s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data)
+{
+	s32 ret_val;
+	u32 page_select = 0;
+	u32 page = offset >> IGP_PAGE_SHIFT;
+	u32 page_shift = 0;
+
+	/* Page 800 works differently than the rest so it has its own func */
+	if (page == BM_WUC_PAGE) {
+		ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, &data,
+							 false);
+		goto out;
+	}
+
+	ret_val = hw->phy.ops.acquire_phy(hw);
+	if (ret_val)
+		goto out;
+
+	hw->phy.addr = e1000_get_phy_addr_for_bm_page(page, offset);
+
+	if (offset > MAX_PHY_MULTI_PAGE_REG) {
+		/*
+		 * Page select is register 31 for phy address 1 and 22 for
+		 * phy address 2 and 3. Page select is shifted only for
+		 * phy address 1.
+		 */
+		if (hw->phy.addr == 1) {
+			page_shift = IGP_PAGE_SHIFT;
+			page_select = IGP01E1000_PHY_PAGE_SELECT;
+		} else {
+			page_shift = 0;
+			page_select = BM_PHY_PAGE_SELECT;
+		}
+
+		/* Page is shifted left, PHY expects (page x 32) */
+		ret_val = e1000e_write_phy_reg_mdic(hw, page_select,
+		                                    (page << page_shift));
+		if (ret_val) {
+			hw->phy.ops.release_phy(hw);
+			goto out;
+		}
+	}
+
+	ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
+	                                    data);
+
+	hw->phy.ops.release_phy(hw);
+
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000e_read_phy_reg_bm - Read BM PHY register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to be read
+ *  @data: pointer to the read data
+ *
+ *  Acquires semaphore, if necessary, then reads the PHY register at offset
+ *  and storing the retrieved information in data.  Release any acquired
+ *  semaphores before exiting.
+ **/
+s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+	s32 ret_val;
+	u32 page_select = 0;
+	u32 page = offset >> IGP_PAGE_SHIFT;
+	u32 page_shift = 0;
+
+	/* Page 800 works differently than the rest so it has its own func */
+	if (page == BM_WUC_PAGE) {
+		ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, data,
+							 true);
+		goto out;
+	}
+
+	ret_val = hw->phy.ops.acquire_phy(hw);
+	if (ret_val)
+		goto out;
+
+	hw->phy.addr = e1000_get_phy_addr_for_bm_page(page, offset);
+
+	if (offset > MAX_PHY_MULTI_PAGE_REG) {
+		/*
+		 * Page select is register 31 for phy address 1 and 22 for
+		 * phy address 2 and 3. Page select is shifted only for
+		 * phy address 1.
+		 */
+		if (hw->phy.addr == 1) {
+			page_shift = IGP_PAGE_SHIFT;
+			page_select = IGP01E1000_PHY_PAGE_SELECT;
+		} else {
+			page_shift = 0;
+			page_select = BM_PHY_PAGE_SELECT;
+		}
+
+		/* Page is shifted left, PHY expects (page x 32) */
+		ret_val = e1000e_write_phy_reg_mdic(hw, page_select,
+		                                    (page << page_shift));
+		if (ret_val) {
+			hw->phy.ops.release_phy(hw);
+			goto out;
+		}
+	}
+
+	ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
+	                                   data);
+	hw->phy.ops.release_phy(hw);
+
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_access_phy_wakeup_reg_bm - Read BM PHY wakeup register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to be read or written
+ *  @data: pointer to the data to read or write
+ *  @read: determines if operation is read or write
+ *
+ *  Acquires semaphore, if necessary, then reads the PHY register at offset
+ *  and storing the retrieved information in data.  Release any acquired
+ *  semaphores before exiting. Note that procedure to read the wakeup
+ *  registers are different. It works as such:
+ *  1) Set page 769, register 17, bit 2 = 1
+ *  2) Set page to 800 for host (801 if we were manageability)
+ *  3) Write the address using the address opcode (0x11)
+ *  4) Read or write the data using the data opcode (0x12)
+ *  5) Restore 769_17.2 to its original value
+ **/
+static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
+					  u16 *data, bool read)
+{
+	s32 ret_val;
+	u16 reg = ((u16)offset) & PHY_REG_MASK;
+	u16 phy_reg = 0;
+	u8  phy_acquired = 1;
+
+
+	ret_val = hw->phy.ops.acquire_phy(hw);
+	if (ret_val) {
+		phy_acquired = 0;
+		goto out;
+	}
+
+	/* All operations in this function are phy address 1 */
+	hw->phy.addr = 1;
+
+	/* Set page 769 */
+	e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT,
+	                          (BM_WUC_ENABLE_PAGE << IGP_PAGE_SHIFT));
+
+	ret_val = e1000e_read_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, &phy_reg);
+	if (ret_val)
+		goto out;
+
+	/* First clear bit 4 to avoid a power state change */
+	phy_reg &= ~(BM_WUC_HOST_WU_BIT);
+	ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, phy_reg);
+	if (ret_val)
+		goto out;
+
+	/* Write bit 2 = 1, and clear bit 4 to 769_17 */
+	ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG,
+	                                    phy_reg | BM_WUC_ENABLE_BIT);
+	if (ret_val)
+		goto out;
+
+	/* Select page 800 */
+	ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT,
+	                                    (BM_WUC_PAGE << IGP_PAGE_SHIFT));
+
+	/* Write the page 800 offset value using opcode 0x11 */
+	ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ADDRESS_OPCODE, reg);
+	if (ret_val)
+		goto out;
+
+	if (read) {
+	        /* Read the page 800 value using opcode 0x12 */
+		ret_val = e1000e_read_phy_reg_mdic(hw, BM_WUC_DATA_OPCODE,
+		                                   data);
+	} else {
+	        /* Read the page 800 value using opcode 0x12 */
+		ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_DATA_OPCODE,
+						    *data);
+	}
+
+	if (ret_val)
+		goto out;
+
+	/*
+	 * Restore 769_17.2 to its original value
+	 * Set page 769
+	 */
+	e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT,
+	                          (BM_WUC_ENABLE_PAGE << IGP_PAGE_SHIFT));
+
+	/* Clear 769_17.2 */
+	ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, phy_reg);
+
+out:
+	if (phy_acquired == 1)
+		hw->phy.ops.release_phy(hw);
+	return ret_val;
+}
+
 /**
  *  e1000e_commit_phy - Soft PHY reset
  *  @hw: pointer to the HW structure