diff --git a/drivers/w1/masters/ds2482.c b/drivers/w1/masters/ds2482.c index 0fd5820d5c6105a18ea99f0a4daf9c74f2c0dfcc..df52cb355f7dd10b093bff43796c283c62c9bb26 100644 --- a/drivers/w1/masters/ds2482.c +++ b/drivers/w1/masters/ds2482.c @@ -94,21 +94,31 @@ static const u8 ds2482_chan_rd[8] = #define DS2482_REG_STS_1WB 0x01 -static int ds2482_attach_adapter(struct i2c_adapter *adapter); -static int ds2482_detect(struct i2c_adapter *adapter, int address, int kind); -static int ds2482_detach_client(struct i2c_client *client); +static int ds2482_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int ds2482_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); +static int ds2482_remove(struct i2c_client *client); /** * Driver data (common to all clients) */ +static const struct i2c_device_id ds2482_id[] = { + { "ds2482", 0 }, + { } +}; + static struct i2c_driver ds2482_driver = { .driver = { .owner = THIS_MODULE, .name = "ds2482", }, - .attach_adapter = ds2482_attach_adapter, - .detach_client = ds2482_detach_client, + .probe = ds2482_probe, + .remove = ds2482_remove, + .id_table = ds2482_id, + .detect = ds2482_detect, + .address_data = &addr_data, }; /* @@ -124,7 +134,7 @@ struct ds2482_w1_chan { }; struct ds2482_data { - struct i2c_client client; + struct i2c_client *client; struct mutex access_lock; /* 1-wire interface(s) */ @@ -147,7 +157,7 @@ struct ds2482_data { static inline int ds2482_select_register(struct ds2482_data *pdev, u8 read_ptr) { if (pdev->read_prt != read_ptr) { - if (i2c_smbus_write_byte_data(&pdev->client, + if (i2c_smbus_write_byte_data(pdev->client, DS2482_CMD_SET_READ_PTR, read_ptr) < 0) return -1; @@ -167,7 +177,7 @@ static inline int ds2482_select_register(struct ds2482_data *pdev, u8 read_ptr) */ static inline int ds2482_send_cmd(struct ds2482_data *pdev, u8 cmd) { - if (i2c_smbus_write_byte(&pdev->client, cmd) < 0) + if (i2c_smbus_write_byte(pdev->client, cmd) < 0) return -1; pdev->read_prt = DS2482_PTR_CODE_STATUS; @@ -187,7 +197,7 @@ static inline int ds2482_send_cmd(struct ds2482_data *pdev, u8 cmd) static inline int ds2482_send_cmd_data(struct ds2482_data *pdev, u8 cmd, u8 byte) { - if (i2c_smbus_write_byte_data(&pdev->client, cmd, byte) < 0) + if (i2c_smbus_write_byte_data(pdev->client, cmd, byte) < 0) return -1; /* all cmds leave in STATUS, except CONFIG */ @@ -216,7 +226,7 @@ static int ds2482_wait_1wire_idle(struct ds2482_data *pdev) if (!ds2482_select_register(pdev, DS2482_PTR_CODE_STATUS)) { do { - temp = i2c_smbus_read_byte(&pdev->client); + temp = i2c_smbus_read_byte(pdev->client); } while ((temp >= 0) && (temp & DS2482_REG_STS_1WB) && (++retries < DS2482_WAIT_IDLE_TIMEOUT)); } @@ -238,13 +248,13 @@ static int ds2482_wait_1wire_idle(struct ds2482_data *pdev) */ static int ds2482_set_channel(struct ds2482_data *pdev, u8 channel) { - if (i2c_smbus_write_byte_data(&pdev->client, DS2482_CMD_CHANNEL_SELECT, + if (i2c_smbus_write_byte_data(pdev->client, DS2482_CMD_CHANNEL_SELECT, ds2482_chan_wr[channel]) < 0) return -1; pdev->read_prt = DS2482_PTR_CODE_CHANNEL; pdev->channel = -1; - if (i2c_smbus_read_byte(&pdev->client) == ds2482_chan_rd[channel]) { + if (i2c_smbus_read_byte(pdev->client) == ds2482_chan_rd[channel]) { pdev->channel = channel; return 0; } @@ -368,7 +378,7 @@ static u8 ds2482_w1_read_byte(void *data) ds2482_select_register(pdev, DS2482_PTR_CODE_DATA); /* Read the data byte */ - result = i2c_smbus_read_byte(&pdev->client); + result = i2c_smbus_read_byte(pdev->client); mutex_unlock(&pdev->access_lock); @@ -415,47 +425,38 @@ static u8 ds2482_w1_reset_bus(void *data) } -/** - * Called to see if the device exists on an i2c bus. - */ -static int ds2482_attach_adapter(struct i2c_adapter *adapter) +static int ds2482_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) { - return i2c_probe(adapter, &addr_data, ds2482_detect); -} + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_WRITE_BYTE_DATA | + I2C_FUNC_SMBUS_BYTE)) + return -ENODEV; + strlcpy(info->type, "ds2482", I2C_NAME_SIZE); -/* - * The following function does more than just detection. If detection - * succeeds, it also registers the new chip. - */ -static int ds2482_detect(struct i2c_adapter *adapter, int address, int kind) + return 0; +} + +static int ds2482_probe(struct i2c_client *client, + const struct i2c_device_id *id) { struct ds2482_data *data; - struct i2c_client *new_client; - int err = 0; + int err = -ENODEV; int temp1; int idx; - if (!i2c_check_functionality(adapter, - I2C_FUNC_SMBUS_WRITE_BYTE_DATA | - I2C_FUNC_SMBUS_BYTE)) - goto exit; - if (!(data = kzalloc(sizeof(struct ds2482_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->driver = &ds2482_driver; - new_client->adapter = adapter; + data->client = client; + i2c_set_clientdata(client, data); /* Reset the device (sets the read_ptr to status) */ if (ds2482_send_cmd(data, DS2482_CMD_RESET) < 0) { - dev_dbg(&adapter->dev, "DS2482 reset failed at 0x%02x.\n", - address); + dev_warn(&client->dev, "DS2482 reset failed.\n"); goto exit_free; } @@ -463,10 +464,10 @@ static int ds2482_detect(struct i2c_adapter *adapter, int address, int kind) ndelay(525); /* Read the status byte - only reset bit and line should be set */ - temp1 = i2c_smbus_read_byte(new_client); + temp1 = i2c_smbus_read_byte(client); if (temp1 != (DS2482_REG_STS_LL | DS2482_REG_STS_RST)) { - dev_dbg(&adapter->dev, "DS2482 (0x%02x) reset status " - "0x%02X - not a DS2482\n", address, temp1); + dev_warn(&client->dev, "DS2482 reset status " + "0x%02X - not a DS2482\n", temp1); goto exit_free; } @@ -478,16 +479,8 @@ static int ds2482_detect(struct i2c_adapter *adapter, int address, int kind) /* Set all config items to 0 (off) */ ds2482_send_cmd_data(data, DS2482_CMD_WRITE_CONFIG, 0xF0); - /* We can fill in the remaining client fields */ - snprintf(new_client->name, sizeof(new_client->name), "ds2482-%d00", - data->w1_count); - mutex_init(&data->access_lock); - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto exit_free; - /* Register 1-wire interface(s) */ for (idx = 0; idx < data->w1_count; idx++) { data->w1_ch[idx].pdev = data; @@ -511,8 +504,6 @@ static int ds2482_detect(struct i2c_adapter *adapter, int address, int kind) return 0; exit_w1_remove: - i2c_detach_client(new_client); - for (idx = 0; idx < data->w1_count; idx++) { if (data->w1_ch[idx].pdev != NULL) w1_remove_master_device(&data->w1_ch[idx].w1_bm); @@ -523,10 +514,10 @@ static int ds2482_detect(struct i2c_adapter *adapter, int address, int kind) return err; } -static int ds2482_detach_client(struct i2c_client *client) +static int ds2482_remove(struct i2c_client *client) { struct ds2482_data *data = i2c_get_clientdata(client); - int err, idx; + int idx; /* Unregister the 1-wire bridge(s) */ for (idx = 0; idx < data->w1_count; idx++) { @@ -534,13 +525,6 @@ static int ds2482_detach_client(struct i2c_client *client) w1_remove_master_device(&data->w1_ch[idx].w1_bm); } - /* Detach the i2c device */ - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, - "Deregistration failed, client not detached.\n"); - return err; - } - /* Free the memory */ kfree(data); return 0;