diff --git a/MAINTAINERS b/MAINTAINERS index 02a94eb64b52751c1c504a35a7c0df127240deaf..7f1fa4ff300affdb1857eec9ac42278dc0a6c770 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3450,7 +3450,7 @@ S: Maintained F: drivers/usb/dwc2/ DESIGNWARE USB3 DRD IP DRIVER -M: Felipe Balbi +M: Felipe Balbi L: linux-usb@vger.kernel.org L: linux-omap@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git @@ -7362,7 +7362,7 @@ F: drivers/tty/isicom.c F: include/linux/isicom.h MUSB MULTIPOINT HIGH SPEED DUAL-ROLE CONTROLLER -M: Felipe Balbi +M: Felipe Balbi L: linux-usb@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git S: Maintained @@ -7931,7 +7931,7 @@ F: drivers/media/platform/omap3isp/ F: drivers/staging/media/omap4iss/ OMAP USB SUPPORT -M: Felipe Balbi +M: Felipe Balbi L: linux-usb@vger.kernel.org L: linux-omap@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git @@ -11314,7 +11314,7 @@ F: Documentation/usb/ehci.txt F: drivers/usb/host/ehci* USB GADGET/PERIPHERAL SUBSYSTEM -M: Felipe Balbi +M: Felipe Balbi L: linux-usb@vger.kernel.org W: http://www.linux-usb.org/gadget T: git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git @@ -11390,7 +11390,7 @@ S: Maintained F: drivers/net/usb/pegasus.* USB PHY LAYER -M: Felipe Balbi +M: Felipe Balbi L: linux-usb@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git S: Maintained diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c index 39a0fa8a4c0aea17b9ecf330c127b110b4b54ba4..e991d55914db649804a6357821f42e78355e6e5b 100644 --- a/drivers/usb/dwc2/core.c +++ b/drivers/usb/dwc2/core.c @@ -572,12 +572,6 @@ static bool dwc2_force_mode(struct dwc2_hsotg *hsotg, bool host) set = host ? GUSBCFG_FORCEHOSTMODE : GUSBCFG_FORCEDEVMODE; clear = host ? GUSBCFG_FORCEDEVMODE : GUSBCFG_FORCEHOSTMODE; - /* - * If the force mode bit is already set, don't set it. - */ - if ((gusbcfg & set) && !(gusbcfg & clear)) - return false; - gusbcfg &= ~clear; gusbcfg |= set; dwc2_writel(gusbcfg, hsotg->regs + GUSBCFG); @@ -3278,9 +3272,6 @@ static void dwc2_get_dev_hwparams(struct dwc2_hsotg *hsotg) /** * During device initialization, read various hardware configuration * registers and interpret the contents. - * - * This should be called during driver probe. It will perform a core - * soft reset in order to get the reset values of the parameters. */ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg) { @@ -3288,7 +3279,6 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg) unsigned width; u32 hwcfg1, hwcfg2, hwcfg3, hwcfg4; u32 grxfsiz; - int retval; /* * Attempt to ensure this device is really a DWC_otg Controller. @@ -3308,10 +3298,6 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg) hw->snpsid >> 12 & 0xf, hw->snpsid >> 8 & 0xf, hw->snpsid >> 4 & 0xf, hw->snpsid & 0xf, hw->snpsid); - retval = dwc2_core_reset(hsotg); - if (retval) - return retval; - hwcfg1 = dwc2_readl(hsotg->regs + GHWCFG1); hwcfg2 = dwc2_readl(hsotg->regs + GHWCFG2); hwcfg3 = dwc2_readl(hsotg->regs + GHWCFG3); diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c index 510f787434b3d574e40cfe4a5a41511c92f1ad50..690b9fd98b55165a8b1d6a7b8bce30f730ac6805 100644 --- a/drivers/usb/dwc2/platform.c +++ b/drivers/usb/dwc2/platform.c @@ -530,7 +530,13 @@ static int dwc2_driver_probe(struct platform_device *dev) if (retval) return retval; - /* Reset the controller and detect hardware config values */ + /* + * Reset before dwc2_get_hwparams() then it could get power-on real + * reset value form registers. + */ + dwc2_core_reset_and_force_dr_mode(hsotg); + + /* Detect config values from hardware */ retval = dwc2_get_hwparams(hsotg); if (retval) goto error; diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index af023a81a0b02160f85e4800594b49aa318190c2..7d1dd82a95ac7325c3da0b45d0d855a31f7f9965 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -2789,6 +2789,7 @@ int dwc3_gadget_init(struct dwc3 *dwc) dwc->gadget.speed = USB_SPEED_UNKNOWN; dwc->gadget.sg_supported = true; dwc->gadget.name = "dwc3-gadget"; + dwc->gadget.is_otg = dwc->dr_mode == USB_DR_MODE_OTG; /* * FIXME We might be setting max_speed to desc)), usb_endpoint_dir_in(&ep->desc), ep); - if (!need_bw_sch(ep, udev->speed, slot_ctx->tt_info & TT_SLOT)) + if (!need_bw_sch(ep, udev->speed, slot_ctx->tt_info & TT_SLOT)) { + /* + * set @bpkts to 1 if it is LS or FS periodic endpoint, and its + * device does not connected through an external HS hub + */ + if (usb_endpoint_xfer_int(&ep->desc) + || usb_endpoint_xfer_isoc(&ep->desc)) + ep_ctx->reserved[0] |= cpu_to_le32(EP_BPKTS(1)); + return 0; + } bw_index = get_bw_index(xhci, udev, ep); sch_bw = &sch_array[bw_index]; diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c index c9ab6a44c34aef05968c0b7e053e63cafd392d8f..9532f5aef71bfe310b499db66a266e9a2c7b32f4 100644 --- a/drivers/usb/host/xhci-mtk.c +++ b/drivers/usb/host/xhci-mtk.c @@ -696,9 +696,24 @@ static int xhci_mtk_remove(struct platform_device *dev) } #ifdef CONFIG_PM_SLEEP +/* + * if ip sleep fails, and all clocks are disabled, access register will hang + * AHB bus, so stop polling roothubs to avoid regs access on bus suspend. + * and no need to check whether ip sleep failed or not; this will cause SPM + * to wake up system immediately after system suspend complete if ip sleep + * fails, it is what we wanted. + */ static int xhci_mtk_suspend(struct device *dev) { struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev); + struct usb_hcd *hcd = mtk->hcd; + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + + xhci_dbg(xhci, "%s: stop port polling\n", __func__); + clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); + del_timer_sync(&hcd->rh_timer); + clear_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags); + del_timer_sync(&xhci->shared_hcd->rh_timer); xhci_mtk_host_disable(mtk); xhci_mtk_phy_power_off(mtk); @@ -710,11 +725,19 @@ static int xhci_mtk_suspend(struct device *dev) static int xhci_mtk_resume(struct device *dev) { struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev); + struct usb_hcd *hcd = mtk->hcd; + struct xhci_hcd *xhci = hcd_to_xhci(hcd); usb_wakeup_disable(mtk); xhci_mtk_clks_enable(mtk); xhci_mtk_phy_power_on(mtk); xhci_mtk_host_enable(mtk); + + xhci_dbg(xhci, "%s: restart port polling\n", __func__); + set_bit(HCD_FLAG_POLL_RH, &hcd->flags); + usb_hcd_poll_rh_status(hcd); + set_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags); + usb_hcd_poll_rh_status(xhci->shared_hcd); return 0; } diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 58c43ed7ff3b6c5291bab17bb646c2bbefcf67b6..f0640b7a1c42e2b82c4b8c6071fa0c43561ab7e7 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -28,7 +28,9 @@ #include "xhci.h" #include "xhci-trace.h" -#define PORT2_SSIC_CONFIG_REG2 0x883c +#define SSIC_PORT_NUM 2 +#define SSIC_PORT_CFG2 0x880c +#define SSIC_PORT_CFG2_OFFSET 0x30 #define PROG_DONE (1 << 30) #define SSIC_PORT_UNUSED (1 << 31) @@ -45,6 +47,7 @@ #define PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI 0x22b5 #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI 0xa12f #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI 0x9d2f +#define PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI 0x0aa8 static const char hcd_name[] = "xhci_hcd"; @@ -151,9 +154,14 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) if (pdev->vendor == PCI_VENDOR_ID_INTEL && (pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI || - pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI)) { + pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI)) { xhci->quirks |= XHCI_PME_STUCK_QUIRK; } + if (pdev->vendor == PCI_VENDOR_ID_INTEL && + pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI) { + xhci->quirks |= XHCI_SSIC_PORT_UNUSED; + } if (pdev->vendor == PCI_VENDOR_ID_ETRON && pdev->device == PCI_DEVICE_ID_EJ168) { xhci->quirks |= XHCI_RESET_ON_RESUME; @@ -312,22 +320,20 @@ static void xhci_pci_remove(struct pci_dev *dev) * SSIC PORT need to be marked as "unused" before putting xHCI * into D3. After D3 exit, the SSIC port need to be marked as "used". * Without this change, xHCI might not enter D3 state. - * Make sure PME works on some Intel xHCI controllers by writing 1 to clear - * the Internal PME flag bit in vendor specific PMCTRL register at offset 0x80a4 */ -static void xhci_pme_quirk(struct usb_hcd *hcd, bool suspend) +static void xhci_ssic_port_unused_quirk(struct usb_hcd *hcd, bool suspend) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); - struct pci_dev *pdev = to_pci_dev(hcd->self.controller); u32 val; void __iomem *reg; + int i; - if (pdev->vendor == PCI_VENDOR_ID_INTEL && - pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI) { - - reg = (void __iomem *) xhci->cap_regs + PORT2_SSIC_CONFIG_REG2; + for (i = 0; i < SSIC_PORT_NUM; i++) { + reg = (void __iomem *) xhci->cap_regs + + SSIC_PORT_CFG2 + + i * SSIC_PORT_CFG2_OFFSET; - /* Notify SSIC that SSIC profile programming is not done */ + /* Notify SSIC that SSIC profile programming is not done. */ val = readl(reg) & ~PROG_DONE; writel(val, reg); @@ -344,6 +350,17 @@ static void xhci_pme_quirk(struct usb_hcd *hcd, bool suspend) writel(val, reg); readl(reg); } +} + +/* + * Make sure PME works on some Intel xHCI controllers by writing 1 to clear + * the Internal PME flag bit in vendor specific PMCTRL register at offset 0x80a4 + */ +static void xhci_pme_quirk(struct usb_hcd *hcd) +{ + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + void __iomem *reg; + u32 val; reg = (void __iomem *) xhci->cap_regs + 0x80a4; val = readl(reg); @@ -355,6 +372,7 @@ static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); struct pci_dev *pdev = to_pci_dev(hcd->self.controller); + int ret; /* * Systems with the TI redriver that loses port status change events @@ -364,9 +382,16 @@ static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) pdev->no_d3cold = true; if (xhci->quirks & XHCI_PME_STUCK_QUIRK) - xhci_pme_quirk(hcd, true); + xhci_pme_quirk(hcd); + + if (xhci->quirks & XHCI_SSIC_PORT_UNUSED) + xhci_ssic_port_unused_quirk(hcd, true); - return xhci_suspend(xhci, do_wakeup); + ret = xhci_suspend(xhci, do_wakeup); + if (ret && (xhci->quirks & XHCI_SSIC_PORT_UNUSED)) + xhci_ssic_port_unused_quirk(hcd, false); + + return ret; } static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated) @@ -396,8 +421,11 @@ static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated) if (pdev->vendor == PCI_VENDOR_ID_INTEL) usb_enable_intel_xhci_ports(pdev); + if (xhci->quirks & XHCI_SSIC_PORT_UNUSED) + xhci_ssic_port_unused_quirk(hcd, false); + if (xhci->quirks & XHCI_PME_STUCK_QUIRK) - xhci_pme_quirk(hcd, false); + xhci_pme_quirk(hcd); retval = xhci_resume(xhci, hibernated); return retval; diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index 770b6b08879790ec2754e26fbb424fcd03c1205c..d39d6bf1d090dad06687892ed723ea3a5e993083 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -184,7 +184,8 @@ static int xhci_plat_probe(struct platform_device *pdev) struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd); /* Just copy data for now */ - *priv = *priv_match; + if (priv_match) + *priv = *priv_match; } if (xhci_plat_type_is(hcd, XHCI_PLAT_TYPE_MARVELL_ARMADA)) { diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index f1c21c40b4a674e6a8fad98ac34c0b9385df76be..3915657e6078b66211fd699eab9bf227752f1ffc 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2193,10 +2193,6 @@ static int process_bulk_intr_td(struct xhci_hcd *xhci, struct xhci_td *td, } /* Fast path - was this the last TRB in the TD for this URB? */ } else if (event_trb == td->last_trb) { - if (td->urb_length_set && trb_comp_code == COMP_SHORT_TX) - return finish_td(xhci, td, event_trb, event, ep, - status, false); - if (EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)) != 0) { td->urb->actual_length = td->urb->transfer_buffer_length - @@ -2248,12 +2244,6 @@ static int process_bulk_intr_td(struct xhci_hcd *xhci, struct xhci_td *td, td->urb->actual_length += TRB_LEN(le32_to_cpu(cur_trb->generic.field[2])) - EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)); - - if (trb_comp_code == COMP_SHORT_TX) { - xhci_dbg(xhci, "mid bulk/intr SP, wait for last TRB event\n"); - td->urb_length_set = true; - return 0; - } } return finish_td(xhci, td, event_trb, event, ep, status, false); diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 26a44c0e969e621be5d2a6e2d947cf9292505716..0c8087d3c3138f72e6eeaedc928c09453ab32285 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -1554,7 +1554,9 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb, "HW died, freeing TD."); urb_priv = urb->hcpriv; - for (i = urb_priv->td_cnt; i < urb_priv->length; i++) { + for (i = urb_priv->td_cnt; + i < urb_priv->length && xhci->devs[urb->dev->slot_id]; + i++) { td = urb_priv->td[i]; if (!list_empty(&td->td_list)) list_del_init(&td->td_list); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 9be7348872baab804691c7fd10f31115a0c7e3fe..cc651383ce5a85d713c66b032a0aa30bd4331dc8 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1631,6 +1631,7 @@ struct xhci_hcd { #define XHCI_BROKEN_STREAMS (1 << 19) #define XHCI_PME_STUCK_QUIRK (1 << 20) #define XHCI_MTK_HOST (1 << 21) +#define XHCI_SSIC_PORT_UNUSED (1 << 22) unsigned int num_active_eps; unsigned int limit_active_eps; /* There are two roothubs to keep track of bus suspend info for */ diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c index b2685e75a6835fe2b4615b3f86f7aef378fedcae..3eaa4ba6867d408a516abec7bb4180d5c9f05d40 100644 --- a/drivers/usb/musb/ux500.c +++ b/drivers/usb/musb/ux500.c @@ -348,7 +348,9 @@ static int ux500_suspend(struct device *dev) struct ux500_glue *glue = dev_get_drvdata(dev); struct musb *musb = glue_to_musb(glue); - usb_phy_set_suspend(musb->xceiv, 1); + if (musb) + usb_phy_set_suspend(musb->xceiv, 1); + clk_disable_unprepare(glue->clk); return 0; @@ -366,7 +368,8 @@ static int ux500_resume(struct device *dev) return ret; } - usb_phy_set_suspend(musb->xceiv, 0); + if (musb) + usb_phy_set_suspend(musb->xceiv, 0); return 0; } diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c index 0d19a6d61a71f7ccb7a55e1b90a7d5d5f27db535..970a30e155cb51bfd1d15126d8cdc65f9adf579c 100644 --- a/drivers/usb/phy/phy-msm-usb.c +++ b/drivers/usb/phy/phy-msm-usb.c @@ -1599,6 +1599,8 @@ static int msm_otg_read_dt(struct platform_device *pdev, struct msm_otg *motg) &motg->id.nb); if (ret < 0) { dev_err(&pdev->dev, "register ID notifier failed\n"); + extcon_unregister_notifier(motg->vbus.extcon, + EXTCON_USB, &motg->vbus.nb); return ret; } @@ -1660,15 +1662,6 @@ static int msm_otg_probe(struct platform_device *pdev) if (!motg) return -ENOMEM; - pdata = dev_get_platdata(&pdev->dev); - if (!pdata) { - if (!np) - return -ENXIO; - ret = msm_otg_read_dt(pdev, motg); - if (ret) - return ret; - } - motg->phy.otg = devm_kzalloc(&pdev->dev, sizeof(struct usb_otg), GFP_KERNEL); if (!motg->phy.otg) @@ -1710,6 +1703,15 @@ static int msm_otg_probe(struct platform_device *pdev) if (!motg->regs) return -ENOMEM; + pdata = dev_get_platdata(&pdev->dev); + if (!pdata) { + if (!np) + return -ENXIO; + ret = msm_otg_read_dt(pdev, motg); + if (ret) + return ret; + } + /* * NOTE: The PHYs can be multiplexed between the chipidea controller * and the dwc3 controller, using a single bit. It is important that @@ -1717,8 +1719,10 @@ static int msm_otg_probe(struct platform_device *pdev) */ if (motg->phy_number) { phy_select = devm_ioremap_nocache(&pdev->dev, USB2_PHY_SEL, 4); - if (!phy_select) - return -ENOMEM; + if (!phy_select) { + ret = -ENOMEM; + goto unregister_extcon; + } /* Enable second PHY with the OTG port */ writel(0x1, phy_select); } @@ -1728,7 +1732,8 @@ static int msm_otg_probe(struct platform_device *pdev) motg->irq = platform_get_irq(pdev, 0); if (motg->irq < 0) { dev_err(&pdev->dev, "platform_get_irq failed\n"); - return motg->irq; + ret = motg->irq; + goto unregister_extcon; } regs[0].supply = "vddcx"; @@ -1737,7 +1742,7 @@ static int msm_otg_probe(struct platform_device *pdev) ret = devm_regulator_bulk_get(motg->phy.dev, ARRAY_SIZE(regs), regs); if (ret) - return ret; + goto unregister_extcon; motg->vddcx = regs[0].consumer; motg->v3p3 = regs[1].consumer; @@ -1834,6 +1839,12 @@ static int msm_otg_probe(struct platform_device *pdev) clk_disable_unprepare(motg->clk); if (!IS_ERR(motg->core_clk)) clk_disable_unprepare(motg->core_clk); +unregister_extcon: + extcon_unregister_notifier(motg->id.extcon, + EXTCON_USB_HOST, &motg->id.nb); + extcon_unregister_notifier(motg->vbus.extcon, + EXTCON_USB, &motg->vbus.nb); + return ret; } diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c index c2936dc48ca7b45b0e5c186859d2879569719323..00bfea01be6501d9b53ccc7975b069c24bc57d7b 100644 --- a/drivers/usb/phy/phy-mxs-usb.c +++ b/drivers/usb/phy/phy-mxs-usb.c @@ -220,7 +220,7 @@ static int mxs_phy_hw_init(struct mxs_phy *mxs_phy) /* Return true if the vbus is there */ static bool mxs_phy_get_vbus_status(struct mxs_phy *mxs_phy) { - unsigned int vbus_value; + unsigned int vbus_value = 0; if (!mxs_phy->regmap_anatop) return false;