提交 da8fa72f 编写于 作者: A Andy Polyakov

SGI IRIX config updates.

上级 6841fb0d
......@@ -137,19 +137,19 @@ my %table=(
##"sunos-cc", "cc:-O4 -DNOPROTO -DNOCONST::(unknown)::DES_UNROLL:::",
"sunos-gcc","gcc:-O3 -mv8::(unknown)::BN_LLONG RC4_CHAR DES_UNROLL DES_PTR DES_RISC1:::",
# SGI configurations. If the box is rather old (r3000 cpu), you will
# probably have to remove the '-mips2' flag. I've only been using
# IRIX 5.[23].
# I've recently done 32 and 64 bit mips assember, it make this RSA
# 3 times faster, use if at all possible.
#"irix-gcc","gcc:-O2 -mips2::SIXTY_FOUR_BIT BN_LLONG RC4_INDEX RC4_CHAR:::",
"irix-gcc","gcc:-O2 -DTERMIOS -DB_ENDIAN::(unknown)::BN_LLONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC2 DES_PTR BF_PTR:::",
#### IRIX 5.x configs
# -mips2 flag is added by ./config when appropriate.
"irix-gcc","gcc:-O3 -DTERMIOS -DB_ENDIAN::(unknown)::BN_LLONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC2 DES_PTR BF_PTR:::",
"irix-cc", "cc:-O2 -use_readonly_const -DTERMIOS -DB_ENDIAN::(unknown)::BN_LLONG DES_PTR DES_RISC2 DES_UNROLL BF_PTR:::",
"irix-mips3-gcc","gcc:-mips3 -O2 -DTERMIOS -DB_ENDIAN::(unknown)::MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC2 DES_PTR BF_PTR SIXTY_FOUR_BIT:::",
"irix-mips3-cc", "cc:-O2 -use_readonly_const -DTERMIOS -DB_ENDIAN::(unknown)::DES_PTR DES_RISC2 DES_UNROLL BF_PTR SIXTY_FOUR_BIT:asm/mips3.o::",
"debug-irix-cc", "cc:-w2 -g -DCRYPTO_MDEBUG -DTERMIOS -DB_ENDIAN::(unknown):::::",
# This is the n64 mode build.
"irix64-mips4-cc", "cc:-64 -O2 -use_readonly_const -DTERMIOS -DB_ENDIAN::(unknown)::DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT_LONG:asm/mips3.o::",
#### IRIX 6.x configs
# Only N32 and N64 ABIs are supported. If you need O32 ABI build, invoke
# './Configure irix-[g]cc' manually.
# -mips4 flag is added by ./config when appropriate.
"irix-mips3-gcc","gcc:-mabi=n32 -mmips-as -O3 -DTERMIOS -DB_ENDIAN::(unknown)::MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC2 DES_PTR BF_PTR SIXTY_FOUR_BIT:asm/mips3.o::",
"irix-mips3-cc", "cc:-n32 -O2 -use_readonly_const -DTERMIOS -DB_ENDIAN::(unknown)::DES_PTR DES_RISC2 DES_UNROLL BF_PTR SIXTY_FOUR_BIT:asm/mips3.o::",
# N64 ABI builds.
"irix64-mips4-gcc","gcc:-mabi=64 -mips4 -mmips-as -O3 -DTERMIOS -DB_ENDIAN::(unknown)::DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT_LONG:asm/mips3.o::",
"irix64-mips4-cc", "cc:-64 -mips4 -O2 -use_readonly_const -DTERMIOS -DB_ENDIAN::(unknown)::DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT_LONG:asm/mips3.o::",
# HPUX 9.X config.
# Don't use the bundled cc. It is broken. Use HP ANSI C if possible, or
......
......@@ -94,12 +94,16 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
esac
;;
IRIX:*)
echo "${MACHINE}-sgi-irix"; exit 0
IRIX:5.*)
echo "mips2-sgi-irix"; exit 0
;;
IRIX:6.*)
echo "mips3-sgi-irix"; exit 0
;;
IRIX64:*)
echo "${MACHINE}-sgi-irix64"; exit 0
echo "mips4-sgi-irix64"; exit 0
;;
Linux:[2-9].*)
......@@ -298,7 +302,7 @@ if [ "$GCCVER" != "" ]; then
# then strip off whatever prefix Cygnus prepends the number with...
GCCVER=`echo $GCCVER | sed 's/^[a-z]*\-//'`
# peak only digits before and after first dot, e.g. 2.95.1 gives 29
GCCVER=`echo $GCCVER | sed '/\([0-9]\)\.\([0-9]\).*/\1\2/'`
GCCVER=`echo $GCCVER | sed 's/\([0-9]\)\.\([0-9]\).*/\1\2/'`
else
CC=cc
if [ "$SYSTEM" = "SunOS" ]
......@@ -311,6 +315,9 @@ else
fi
fi
GCCVER=${GCCVER:-0}
CCVER=${CCVER:-0}
# read the output of the embedded GuessOS
read GUESSOS
......@@ -323,6 +330,32 @@ case "$GUESSOS" in
alpha-*-linux2) OUT="alpha-gcc" ;;
ppc-*-linux2) OUT="linux-ppc" ;;
mips-*-linux?) OUT="linux-mips" ;;
mips2-sgi-irix)
CPU=`(hinv -t cpu) 2>/dev/null | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
CPU=${CPU:-0}
if [ $CPU -ge 4000 ]; then
options="$options -mips2"
fi
OUT="irix-$CC"
;;
mips3-sgi-irix)
CPU=`(hinv -t cpu) 2>/dev/null | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
CPU=${CPU:-0}
if [ $CPU -ge 5000 ]; then
options="$options -mips4"
else
options="$options -mips3"
fi
OUT="irix-mips3-$CC"
;;
mips4-sgi-irix64)
echo "WARNING! If you wish to build 64-bit library, then you have to"
echo " invoke './Configre irix64-mips4-$CC' *manually*."
echo " Type Ctrl-C if you don't want to continue."
read waste < /dev/tty
options="$options -mips4"
OUT="irix-mips3-$CC"
;;
sparc64-*-linux2)
#Before we uncomment following line we have to wait at least till
#64-bit glibc for SPARC is available:-(
......@@ -331,7 +364,7 @@ case "$GUESSOS" in
#echo " Type Ctrl-C if you don't want to continue."
#read waste < /dev/tty
OUT="linux-sparcv9" ;;
sparc-*-linux2) OUT="linux-sparc" ;;
sparc-*-linux2)
KARCH=`awk '/type/{print$3}' /proc/cpuinfo`
case ${KARCH:-sun4} in
sun4u*) OUT="linux-sparcv9" ;;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册