menu "Hardware Drivers Config"

    menu "On-chip Peripheral Drivers"
        config BSP_USING_GPIO
            bool "Enable GPIO"
            select RT_USING_PIN
            default y

        menu "UART Drivers"
            config BSP_USING_UART0
                bool "Enable UART0 PB10/PB11(T/R)"
                select RT_USING_SERIAL
                default n

            config BSP_USING_UART1
                bool "Enable UART1 PC10/PC11(T/R)"
                select RT_USING_SERIAL
                default y

        endmenu

        menu "SPI Drivers"
            config BSP_USING_SPI0
                bool "Enable SPI0 BUS PB03/PB04/PB05(CLK/MISO/MOSI)"
                select RT_USING_SPI
                select RT_USING_PIN
                default n

            config BSP_USING_SPI1
                bool "Enable SPI1 BUS PB13/PB14/PB15(CLK/MISO/MOSI)"
                select RT_USING_SPI
                select RT_USING_PIN
                default n
        endmenu

        menu "I2C Drivers"
            config BSP_USING_I2C0
                bool "Enable I2C0 BUS PB08/PB09(SCL/SDA)"
                select RT_USING_I2C
                default n
            config BSP_USING_I2C1
                bool "Enable I2C1 BUS PB10/PB11(SCL/SDA)"
                select RT_USING_I2C
                default n
        endmenu

        menu "PWM Drivers"
            config BSP_USING_PWM0
                bool "Using PWM0 PA08/PA09/PA10/PA11"
                select RT_USING_PWM
                default n 

            config BSP_USING_PWM1
                bool "Using PWM1 PB06/PB07/PB08"
                select RT_USING_PWM
                default n  

            config BSP_USING_PWM2
                bool "Using PWM2 PA00/PA01"
                select RT_USING_PWM
                default n  

            config BSP_USING_PWM3
                bool "Using PWM3 PC06/PC07"
                select RT_USING_PWM
                default n
        endmenu

        menu "HWtimer Drivers"
            config BSP_USING_HWTIMER0
                bool "Using timer0"
                select RT_USING_HWTIMER
                default n

            config BSP_USING_HWTIMER1
                bool "Using timer1"
                select RT_USING_HWTIMER
                default n

            config BSP_USING_HWTIMER2
                bool "Using timer2"
                select RT_USING_HWTIMER
                default n

            config BSP_USING_HWTIMER3
                bool "Using timer3"
                select RT_USING_HWTIMER
                default n
        endmenu

        menu "RTC Drivers"
            config BSP_USING_RTC
                bool "Using RTC"
                select RT_USING_RTC
                default n
        endmenu

        menu "PM Drivers"
            config BSP_USING_PM
                bool "Using PM"
                select RT_USING_PM
                default n
        endmenu

        menu "ADC Drivers"
            config BSP_USING_ADC
                bool "Using ADC"
                select RT_USING_ADC
                default n
        endmenu

    endmenu

    menu "Onboard Peripheral Drivers"

        config BSP_USING_SPI_FLASH
            bool "Enable SPI FLASH (W25Q64 spi0)"
            select BSP_USING_SPI
            select BSP_USING_SPI0
            select RT_USING_SFUD
            select RT_SFUD_USING_SFDP
            default n

    endmenu

    menu "Offboard Peripheral Drivers"

    endmenu


    menu "Peripheral Drivers test example"

        config BSP_USING_EXAMPLE_ADC_VOL
            bool "BSP_USING_EXAMPLE_ADC_VOL"
            default n
        
        config BSP_USING_EXAMPLE_HWTIMER
            bool "BSP_USING_EXAMPLE_HWTIMER"
            default n

        config BSP_USING_EXAMPLE_I2C
            bool "BSP_USING_EXAMPLE_I2C"
            default n

        config BSP_USING_EXAMPLE_LED_BLINK
            bool "BSP_USING_EXAMPLE_LED_BLINK"
            default y

        config BSP_USING_EXAMPLE_PIN_BEEP
            bool "BSP_USING_EXAMPLE_PIN_BEEP"
            default y

        config BSP_USING_EXAMPLE_PWM_LED
            bool "BSP_USING_EXAMPLE_PWM_LED"
            default n

        config BSP_USING_EXAMPLE_RTC
            bool "BSP_USING_EXAMPLE_RTC"
            default n

        config BSP_USING_EXAMPLE_SPI
            bool "BSP_USING_EXAMPLE_SPI"
            default n

        config BSP_USING_EXAMPLE_UART
            bool "BSP_USING_EXAMPLE_UART"
            default y

        config BSP_USING_EXAMPLE_PM
            bool "BSP_USING_EXAMPLE_PM"
            default n


    endmenu

endmenu