/**
 * Copyright (c) 2015 - 2017, Nordic Semiconductor ASA
 * 
 * All rights reserved.
 * 
 * Redistribution and use in source and binary forms, with or without modification,
 * are permitted provided that the following conditions are met:
 * 
 * 1. Redistributions of source code must retain the above copyright notice, this
 *    list of conditions and the following disclaimer.
 * 
 * 2. Redistributions in binary form, except as embedded into a Nordic
 *    Semiconductor ASA integrated circuit in a product or a software update for
 *    such product, must reproduce the above copyright notice, this list of
 *    conditions and the following disclaimer in the documentation and/or other
 *    materials provided with the distribution.
 * 
 * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
 *    contributors may be used to endorse or promote products derived from this
 *    software without specific prior written permission.
 * 
 * 4. This software, with or without modification, must only be used with a
 *    Nordic Semiconductor ASA integrated circuit.
 * 
 * 5. Any software provided in binary form under this license must not be reverse
 *    engineered, decompiled, modified and/or disassembled.
 * 
 * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
 * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
 * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 * 
 */
/** @file
 *
 * @defgroup low_power_pwm Low-power PWM
 * @{
 * @ingroup app_common
 *
 * @brief Module for generating a low-power pulse-width modulated output signal.
 *
 * This module provides a low-power PWM implementation using app_timers and GPIO.
 *
 * Each low-power PWM instance utilizes one app_timer. This means it runs on RTC
 * and does not require HFCLK to be running. There can be any number of output
 * channels per instance.
 */

#ifndef LOW_POWER_PWM_H__
#define LOW_POWER_PWM_H__

#include <stdbool.h>
#include <stdint.h>
#include "app_timer.h"
#include "nrf_drv_common.h"
#include "sdk_errors.h"

#ifdef __cplusplus
extern "C" {
#endif

/**
 * @brief Event types.
 */
typedef enum
{
    LOW_POWER_PWM_EVENT_PERIOD = 0,
    LOW_POWER_PWM_EVENT_DUTY_CYCLE
}low_power_pwm_evt_type_t;

/**@brief Application time-out handler type. */
typedef void (*low_power_pwm_timeout_user)(void * p_context, low_power_pwm_evt_type_t evt_type);

/**
 * @brief Structure holding the initialization parameters.
 */
typedef struct
{
    bool                    active_high; /**< Activate negative polarity. */
    uint8_t                 period;      /**< Width of the low_power_pwm period. */
    NRF_GPIO_Type *         p_port;      /**< Port used to work on selected mask. */
    uint32_t                bit_mask;    /**< Pins to be initialized. */
    app_timer_id_t const *  p_timer_id;  /**< Pointer to the timer ID of low_power_pwm. */
} low_power_pwm_config_t;


/**
 * @name Default settings
 * @{
 *
 * @brief Default parameters for the @ref low_power_pwm_config_t structure.
 *
 */
#define LOW_POWER_PWM_CONFIG_ACTIVE_HIGH        false
#define LOW_POWER_PWM_CONFIG_PERIOD             UINT8_MAX
#define LOW_POWER_PWM_CONFIG_PORT               NRF_GPIO
#define LOW_POWER_PWM_CONFIG_BIT_MASK(mask)     (mask)
/** @} */

/**
 * @brief Low-power PWM default configuration.
 */
#define LOW_POWER_PWM_DEFAULT_CONFIG(mask)             \
{                                                      \
    .active_high = LOW_POWER_PWM_CONFIG_ACTIVE_HIGH ,  \
    .period      = LOW_POWER_PWM_CONFIG_PERIOD   ,     \
    .p_port      = LOW_POWER_PWM_CONFIG_PORT,          \
    .bit_mask    = LOW_POWER_PWM_CONFIG_BIT_MASK(mask) \
}
/**
 * @cond (NODOX)
 * @defgroup low_power_pwm_internal Auxiliary internal types declarations
 * @brief Module for internal usage inside the library only.
 * @details These definitions are available to the user, but they should not
 * be accessed directly. Use @ref low_power_pwm_duty_set instead.
 * @{
 *
 */

    /**
     * @brief Structure holding parameters of a given low-power PWM instance.
     */
    struct low_power_pwm_s
    {
        bool                        active_high;        /**< Activate negative polarity. */
        bool                        pin_is_on;          /**< Indicates the current state of the pin. */
        uint8_t                     period;             /**< Width of the low_power_pwm period. */
        uint8_t                     duty_cycle;         /**< Width of high pulse. */
        nrf_drv_state_t             pwm_state;          /**< Indicates the current state of the PWM instance. */
        uint32_t                    bit_mask;           /**< Pins to be initialized. */
        uint32_t                    bit_mask_toggle;    /**< Pins to be toggled. */
        uint32_t                    timeout_ticks;      /**< Value to start the next app_timer. */
        low_power_pwm_evt_type_t    evt_type;           /**< Slope that triggered time-out. */
        app_timer_timeout_handler_t handler;            /**< User handler to be called in the time-out handler. */
        app_timer_id_t const *      p_timer_id;         /**< Pointer to the timer ID of low_power_pwm. */
        NRF_GPIO_Type *             p_port;             /**< Port used with pin bit mask. */
    };

/** @}
 * @endcond
 */

/**
 * @brief Internal structure holding parameters of a low-power PWM instance.
 */
typedef struct low_power_pwm_s low_power_pwm_t;


/**
 * @brief   Function for initializing a low-power PWM instance.
 *
 * @param[in] p_pwm_instance            Pointer to the instance to be started.
 * @param[in] p_pwm_config              Pointer to the configuration structure.
 * @param[in] handler                   User function to be called in case of time-out.
 *
 * @return Values returned by @ref app_timer_create.
 */
ret_code_t low_power_pwm_init(low_power_pwm_t * p_pwm_instance,
                              low_power_pwm_config_t const * p_pwm_config,
                              app_timer_timeout_handler_t handler);


/**
 * @brief   Function for starting a low-power PWM instance.
 *
 * @param[in] p_pwm_instance            Pointer to the instance to be started.
 * @param[in] pins_bit_mask             Bit mask of pins to be started.
 *
 * @return Values returned by @ref app_timer_start.
 */
ret_code_t low_power_pwm_start(low_power_pwm_t * p_pwm_instance,
                               uint32_t          pins_bit_mask);


/**
 * @brief   Function for stopping a low-power PWM instance.
 *
 * @param[in] p_pwm_instance            Pointer to the instance to be stopped.
 *
 * @return Values returned by @ref app_timer_stop.
 */
ret_code_t low_power_pwm_stop(low_power_pwm_t * p_pwm_instance);


/**
 * @brief   Function for setting a new high pulse width for a given instance.
 *
 * This function can be called from the timer handler.
 *
 * @param[in] p_pwm_instance            Pointer to the instance to be changed.
 * @param[in] duty_cycle                New high pulse width. 0 means that the pin is always off. 255 means that it is always on.
 *
 * @retval NRF_SUCCESS                  If the function completed successfully.
 * @retval NRF_ERROR_INVALID_PARAM      If the function returned an error because of invalid parameters.
 */
ret_code_t low_power_pwm_duty_set(low_power_pwm_t * p_pwm_instance, uint8_t duty_cycle);


#ifdef __cplusplus
}
#endif

#endif // LOW_POWER_PWM_H__

/** @} */