/** * Copyright (c) 2012 - 2017, Nordic Semiconductor ASA * * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, this * list of conditions and the following disclaimer. * * 2. Redistributions in binary form, except as embedded into a Nordic * Semiconductor ASA integrated circuit in a product or a software update for * such product, must reproduce the above copyright notice, this list of * conditions and the following disclaimer in the documentation and/or other * materials provided with the distribution. * * 3. Neither the name of Nordic Semiconductor ASA nor the names of its * contributors may be used to endorse or promote products derived from this * software without specific prior written permission. * * 4. This software, with or without modification, must only be used with a * Nordic Semiconductor ASA integrated circuit. * * 5. Any software provided in binary form under this license must not be reverse * engineered, decompiled, modified and/or disassembled. * * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * */ /**@file * * @defgroup ble_nus_c Nordic UART Service Client * @{ * @ingroup ble_sdk_srv * @brief Nordic UART Service Client module. * * @details This module contains the APIs and types exposed by the Nordic UART Service Client * module. These APIs and types can be used by the application to perform discovery of * the Nordic UART Service at the peer and interact with it. * * @note The application must propagate BLE stack events to this module by calling * ble_nus_c_on_ble_evt(). * */ #ifndef BLE_NUS_C_H__ #define BLE_NUS_C_H__ #include #include #include "ble.h" #include "ble_gatt.h" #include "ble_db_discovery.h" #include "sdk_config.h" #ifdef __cplusplus extern "C" { #endif #define NUS_BASE_UUID {{0x9E, 0xCA, 0xDC, 0x24, 0x0E, 0xE5, 0xA9, 0xE0, 0x93, 0xF3, 0xA3, 0xB5, 0x00, 0x00, 0x40, 0x6E}} /**< Used vendor specific UUID. */ #define BLE_UUID_NUS_SERVICE 0x0001 /**< The UUID of the Nordic UART Service. */ #define BLE_UUID_NUS_RX_CHARACTERISTIC 0x0002 /**< The UUID of the RX Characteristic. */ #define BLE_UUID_NUS_TX_CHARACTERISTIC 0x0003 /**< The UUID of the TX Characteristic. */ #define OPCODE_LENGTH 1 #define HANDLE_LENGTH 2 #if defined(NRF_BLE_GATT_MAX_MTU_SIZE) && (NRF_BLE_GATT_MAX_MTU_SIZE != 0) #define BLE_NUS_MAX_DATA_LEN (NRF_BLE_GATT_MAX_MTU_SIZE - OPCODE_LENGTH - HANDLE_LENGTH) /**< Maximum length of data (in bytes) that can be transmitted to the peer by the Nordic UART service module. */ #else #define BLE_NUS_MAX_DATA_LEN (BLE_GATT_MTU_SIZE_DEFAULT - OPCODE_LENGTH - HANDLE_LENGTH) /**< Maximum length of data (in bytes) that can be transmitted to the peer by the Nordic UART service module. */ #warning NRF_BLE_GATT_MAX_MTU_SIZE is not defined. #endif /**@brief NUS Client event type. */ typedef enum { BLE_NUS_C_EVT_DISCOVERY_COMPLETE = 1, /**< Event indicating that the NUS service and its characteristics was found. */ BLE_NUS_C_EVT_NUS_TX_EVT, /**< Event indicating that the central has received something from a peer. */ BLE_NUS_C_EVT_DISCONNECTED /**< Event indicating that the NUS server has disconnected. */ } ble_nus_c_evt_type_t; /**@brief Handles on the connected peer device needed to interact with it. */ typedef struct { uint16_t nus_tx_handle; /**< Handle of the NUS TX characteristic as provided by a discovery. */ uint16_t nus_tx_cccd_handle; /**< Handle of the CCCD of the NUS TX characteristic as provided by a discovery. */ uint16_t nus_rx_handle; /**< Handle of the NUS RX characteristic as provided by a discovery. */ } ble_nus_c_handles_t; /**@brief Structure containing the NUS event data received from the peer. */ typedef struct { ble_nus_c_evt_type_t evt_type; uint16_t conn_handle; uint16_t max_data_len; uint8_t * p_data; uint8_t data_len; ble_nus_c_handles_t handles; /**< Handles on which the Nordic Uart service characteristics was discovered on the peer device. This will be filled if the evt_type is @ref BLE_NUS_C_EVT_DISCOVERY_COMPLETE.*/ } ble_nus_c_evt_t; // Forward declaration of the ble_nus_t type. typedef struct ble_nus_c_s ble_nus_c_t; /**@brief Event handler type. * * @details This is the type of the event handler that should be provided by the application * of this module to receive events. */ typedef void (* ble_nus_c_evt_handler_t)(ble_nus_c_t * p_ble_nus_c, const ble_nus_c_evt_t * p_evt); /**@brief NUS Client structure. */ struct ble_nus_c_s { uint8_t uuid_type; /**< UUID type. */ uint16_t conn_handle; /**< Handle of the current connection. Set with @ref ble_nus_c_handles_assign when connected. */ ble_nus_c_handles_t handles; /**< Handles on the connected peer device needed to interact with it. */ ble_nus_c_evt_handler_t evt_handler; /**< Application event handler to be called when there is an event related to the NUS. */ }; /**@brief NUS Client initialization structure. */ typedef struct { ble_nus_c_evt_handler_t evt_handler; } ble_nus_c_init_t; /**@brief Function for initializing the Nordic UART client module. * * @details This function registers with the Database Discovery module * for the NUS. Doing so will make the Database Discovery * module look for the presence of a NUS instance at the peer when a * discovery is started. * * @param[in] p_ble_nus_c Pointer to the NUS client structure. * @param[in] p_ble_nus_c_init Pointer to the NUS initialization structure containing the * initialization information. * * @retval NRF_SUCCESS If the module was initialized successfully. Otherwise, an error * code is returned. This function * propagates the error code returned by the Database Discovery module API * @ref ble_db_discovery_evt_register. */ uint32_t ble_nus_c_init(ble_nus_c_t * p_ble_nus_c, ble_nus_c_init_t * p_ble_nus_c_init); /**@brief Function for handling events from the database discovery module. * * @details This function will handle an event from the database discovery module, and determine * if it relates to the discovery of NUS at the peer. If so, it will * call the application's event handler indicating that NUS has been * discovered at the peer. It also populates the event with the service related * information before providing it to the application. * * @param[in] p_ble_nus_c Pointer to the NUS client structure. * @param[in] p_evt Pointer to the event received from the database discovery module. */ void ble_nus_c_on_db_disc_evt(ble_nus_c_t * p_ble_nus_c, ble_db_discovery_evt_t * p_evt); /**@brief Function for handling BLE events from the SoftDevice. * * @details This function handles the BLE events received from the SoftDevice. If a BLE * event is relevant to the NUS module, it is used to update * internal variables and, if necessary, send events to the application. * * @param[in] p_ble_nus_c Pointer to the NUS client structure. * @param[in] p_ble_evt Pointer to the BLE event. */ void ble_nus_c_on_ble_evt(ble_nus_c_t * p_ble_nus_c, const ble_evt_t * p_ble_evt); /**@brief Function for requesting the peer to start sending notification of TX characteristic. * * @details This function enables notifications of the NUS TX characteristic at the peer * by writing to the CCCD of the NUS TX characteristic. * * @param p_ble_nus_c Pointer to the NUS client structure. * * @retval NRF_SUCCESS If the SoftDevice has been requested to write to the CCCD of the peer. * Otherwise, an error code is returned. This function propagates the error * code returned by the SoftDevice API @ref sd_ble_gattc_write. */ uint32_t ble_nus_c_tx_notif_enable(ble_nus_c_t * p_ble_nus_c); /**@brief Function for sending a string to the server. * * @details This function writes the RX characteristic of the server. * * @param[in] p_ble_nus_c Pointer to the NUS client structure. * @param[in] p_string String to be sent. * @param[in] length Length of the string. * * @retval NRF_SUCCESS If the string was sent successfully. Otherwise, an error code is returned. */ uint32_t ble_nus_c_string_send(ble_nus_c_t * p_ble_nus_c, uint8_t * p_string, uint16_t length); /**@brief Function for assigning handles to a this instance of nus_c. * * @details Call this function when a link has been established with a peer to * associate this link to this instance of the module. This makes it * possible to handle several link and associate each link to a particular * instance of this module. The connection handle and attribute handles will be * provided from the discovery event @ref BLE_NUS_C_EVT_DISCOVERY_COMPLETE. * * @param[in] p_ble_nus_c Pointer to the NUS client structure instance to associate with these * handles. * @param[in] conn_handle Connection handle to associated with the given NUS Instance. * @param[in] p_peer_handles Attribute handles on the NUS server that you want this NUS client to * interact with. * * @retval NRF_SUCCESS If the operation was successful. * @retval NRF_ERROR_NULL If a p_nus was a NULL pointer. */ uint32_t ble_nus_c_handles_assign(ble_nus_c_t * p_ble_nus_c, const uint16_t conn_handle, const ble_nus_c_handles_t * p_peer_handles); #ifdef __cplusplus } #endif #endif // BLE_NUS_C_H__ /** @} */