/** * This software is subject to the ANT+ Shared Source License * www.thisisant.com/swlicenses * Copyright (c) Dynastream Innovations, Inc. 2012 * All rights reserved. * * Redistribution and use in source and binary forms, with or * without modification, are permitted provided that the following * conditions are met: * 1) Redistributions of source code must retain the above * copyright notice, this list of conditions and the following * disclaimer. * * 2) Redistributions in binary form must reproduce the above * copyright notice, this list of conditions and the following * disclaimer in the documentation and/or other materials * provided with the distribution. * * 3) Neither the name of Dynastream nor the names of its * contributors may be used to endorse or promote products * derived from this software without specific prior * written permission. * * The following actions are prohibited: * 1) Redistribution of source code containing the ANT+ Network * Key. The ANT+ Network Key is available to ANT+ Adopters. * Please refer to http://thisisant.com to become an ANT+ * Adopter and access the key. * * 2) Reverse engineering, decompilation, and/or disassembly of * software provided in binary form under this license. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE * ABOVE LIMITATIONS MAY NOT APPLY TO YOU. * */ /**@file * @brief The ANT-FS client protocol interface. * This file is based on implementation originally made by Dynastream Innovations Inc. - August 2012 * @defgroup ant_fs ANT-FS client device simulator * @{ * @ingroup ant_sdk_utils * * @brief The ANT-FS client device simulator. * * @note The ANT-FS Network Key is available for ANT+ Adopters. Please refer to http://thisisant.com to become an ANT+ Adopter and access the key. */ #ifndef ANTFS_H__ #define ANTFS_H__ #include #include #include "defines.h" #include "sdk_config.h" #ifdef __cplusplus extern "C" { #endif #define ANTFS_VERSION_MAJOR 1u /**< Version major number. */ #define ANTFS_VERSION_MINOR 0 /**< Version minor number. */ #define ANTFS_VERSION_ITERATION 0 /**< Version iteration. */ #define ANTFS_VERSION_TYPE 'R' /**< Version type is release. */ #define ANTFS_VERSION_SPEC '0.AK' /**< Version of the ANT-FS Technology Specification. */ #define ANTFS_DIR_STRUCT_VERSION 1u /**< Version of the directory file structure. */ #define ANTFS_VERSION_DATE 20090522u /**< Version date. */ // ANT-FS options. #define ANTFS_LINK_FREQ 50u /**< RF Frequency (+2400MHz). */ #define ANTFS_CHANNEL_TYPE CHANNEL_TYPE_MASTER /**< ANT-FS Client Channel Type. */ #define ANTFS_AUTH_STRING_MAX 255u /**< Maximum size of authentication strings (passkey/friendly name). */ #define ANTFS_PASSKEY_SIZE 16u /**< Passkey size. */ #define ANTFS_FRIENDLY_NAME_MAX 16u /**< Maximum size of friendly name received from host. */ #define ANTFS_REMOTE_FRIENDLY_NAME_MAX 16u /**< Maximum size of client's friendly name. */ // Beacon definitions. #define BEACON_PERIOD_SHIFT 0x00 /**< Shift value for masking out beacon period. */ #define BEACON_PERIOD_MASK (0x07u << BEACON_PERIOD_SHIFT) /**< Beacon period bitmask. */ #define BEACON_PERIOD_0_5_HZ (0x00 << BEACON_PERIOD_SHIFT) /**< Value for 0,5Hz beacon period. */ #define BEACON_PERIOD_1_HZ (0x01u << BEACON_PERIOD_SHIFT) /**< Value for 1Hz beacon period. */ #define BEACON_PERIOD_2_HZ (0x02u << BEACON_PERIOD_SHIFT) /**< Value for 2Hz beacon period. */ #define BEACON_PERIOD_4_HZ (0x03u << BEACON_PERIOD_SHIFT) /**< Value for 4Hz beacon period. */ #define BEACON_PERIOD_8_HZ (0x04u << BEACON_PERIOD_SHIFT) /**< Value for 8Hz beacon period. */ #define PAIRING_AVAILABLE_FLAG_SHIFT 0x03u /**< Shift value for masking out pairing enabled bit. */ #define PAIRING_AVAILABLE_FLAG_MASK (0x01u << PAIRING_AVAILABLE_FLAG_SHIFT) /**< Pairing enabled bitmask. */ #define UPLOAD_ENABLED_FLAG_SHIFT 0x04u /**< Shift value for masking out upload enabled bit. */ #define UPLOAD_ENABLED_FLAG_MASK (0x01u << UPLOAD_ENABLED_FLAG_SHIFT) /**< Upload enabled bitmask. */ #define DATA_AVAILABLE_FLAG_SHIFT 0x05u /**< Shift value for masking out data available bit. */ #define DATA_AVAILABLE_FLAG_MASK (0x01u << DATA_AVAILABLE_FLAG_SHIFT) /**< Data available bitmask. */ #if ANTFS_ENABLED // Build the default beacon settings. #if ANTFS_CONFIG_AUTH_TYPE_PAIRING_ENABLED #define ANTFS_PAIRING_BIT PAIRING_AVAILABLE_FLAG_MASK /**< Build pairing enabled default beacon setting. */ #else #define ANTFS_PAIRING_BIT 0x00u /**< Build pairing disabled default beacon setting. */ #endif // ANTFS_CONFIG_AUTH_TYPE_PAIRING_ENABLED #if ANTFS_CONFIG_UPLOAD_ENABLED #define ANTFS_UPLOAD_BIT UPLOAD_ENABLED_FLAG_MASK /**< Build upload enabled default beacon setting. */ #else #define ANTFS_UPLOAD_BIT 0x00u /**< Build upload disabled default beacon setting. */ #endif // ANTFS_CONFIG_UPLOAD_ENABLED #define ANTFS_DEFAULT_BEACON (ANTFS_CONFIG_BEACON_STATUS_PERIOD | ANTFS_UPLOAD_BIT | ANTFS_PAIRING_BIT | DATA_AVAILABLE_FLAG_MASK) /**< Define the default beacon setting. */ #endif // ANTFS_ENABLED // Download/Upload responses. #define RESPONSE_MESSAGE_OK 0x00u /**< Download request ok. */ #define RESPONSE_MESSAGE_NOT_EXIST 0x01u /**< File does not exist. */ #define RESPONSE_MESSAGE_NOT_AVAILABLE 0x02u /**< File can not be read/written to (download/upload respectively). */ #define RESPONSE_INVALID_OPERATION 0x04u /**< Request invalid. */ // Download responses. #define RESPONSE_MESSAGE_NOT_READY 0x03u /**< Not ready to download. */ #define RESPONSE_INVALID_CRC 0x05u /**< CRC incorrect. */ // Upload responses. #define RESPONSE_MESSAGE_NOT_ENOUGH_SPACE 0x03u /**< Not enough space to to complete write. */ #define RESPONSE_MESSAGE_UPLOAD_NOT_READY 0x05u /**< Not ready to upload */ // Upload/Erase responses. #define RESPONSE_MESSAGE_FAIL 0x01u /**< Data File Index does not exist / Erase failed. */ // Directory general file flags. #define ANTFS_DIR_READ_MASK 0x80u /**< Read (can download). */ #define ANTFS_DIR_WRITE_MASK 0x40u /**< Write (can upload). */ #define ANTFS_DIR_ERASE_MASK 0x20u /**< Erase (can erase). */ #define ANTFS_DIR_ARCHIVE_MASK 0x10u /**< Archive (has been downloaded). */ #define ANTFS_DIR_APPEND_MASK 0x08u /**< Append (can append to file only). */ #define ANTFS_MAX_FILE_SIZE 0xFFFFFFFFu /**< Maximum file size, as specified by directory structure. */ #define ANTFS_BURST_BLOCK_SIZE 16u /**< Size of each block of burst data that the client attempts to send when it processes a data request event. */ /**@brief ANT-FS beacon status. */ typedef union { uint32_t status; /**< Beacon status byte 1. */ struct { uint32_t link_period : 3; /**< Beacon period (0.5 - 8 Hz). */ bool is_pairing_enabled : 1; /**< Pairing is enabled/disabled. */ bool is_upload_enabled : 1; /**< Upload is enabled/disabled. */ bool is_data_available : 1; /**< Data is available for download / no data available. */ bool reserved : 2; /**< Reserved. */ } parameters; } antfs_beacon_status_byte1_t; // ANT-FS states. typedef enum { ANTFS_STATE_OFF, /**< Off state. */ ANTFS_STATE_INIT, /**< Init state. */ ANTFS_STATE_LINK, /**< Link state. */ ANTFS_STATE_AUTH, /**< Authenticate state. */ ANTFS_STATE_TRANS /**< Transport state. */ } antfs_state_t; // ANT-FS link layer substates. typedef enum { ANTFS_LINK_SUBSTATE_NONE /**< None state. */ } antfs_link_substate_t; // ANT-FS authenticate layer substates. */ typedef enum { ANTFS_AUTH_SUBSTATE_NONE, /**< None state. */ ANTFS_AUTH_SUBSTATE_PAIR, /**< Pairing state. */ ANTFS_AUTH_SUBSTATE_PASSKEY, /**< Passkey state. */ ANTFS_AUTH_SUBSTATE_ACCEPT, /**< Authenticate accept state. */ ANTFS_AUTH_SUBSTATE_REJECT /**< Authenticate reject state. */ } antfs_authenticate_substate_t; // ANT-FS transport layer substates. */ typedef enum { ANTFS_TRANS_SUBSTATE_NONE, /**< None state. */ ANTFS_TRANS_SUBSTATE_VERIFY_CRC, /**< Verify CRC state. */ ANTFS_TRANS_SUBSTATE_DOWNLOADING, /**< Downloading state. */ ANTFS_TRANS_SUBSTATE_UPLOAD_WAIT_FOR_DATA, /**< Wait for upload data request state. */ ANTFS_TRANS_SUBSTATE_UPLOADING, /**< Ready / receiving upload data state. */ ANTFS_TRANS_SUBSTATE_UPLOAD_RESUME /**< RX failure upon receiving upload data state. */ } antfs_transport_substate_t; // ANT-FS Events. typedef enum { ANTFS_EVENT_PAIRING_REQUEST = 0xB0, /**< Pairing request event. */ ANTFS_EVENT_PAIRING_TIMEOUT = 0xB1, /**< Pairing timeout event. */ ANTFS_EVENT_OPEN_COMPLETE = 0xB2, /**< Channel setup complete event. */ ANTFS_EVENT_CLOSE_COMPLETE = 0xB4, /**< Channel closed event. */ ANTFS_EVENT_LINK = 0xB6, /**< Enter link layer event. */ ANTFS_EVENT_AUTH = 0xB7, /**< Enter authenticate layer event. */ ANTFS_EVENT_TRANS = 0xB8, /**< Enter transport layer event. */ ANTFS_EVENT_DOWNLOAD_REQUEST = 0xB9, /**< Download request event. */ ANTFS_EVENT_DOWNLOAD_REQUEST_DATA = 0xBA, /**< Download request data event. */ ANTFS_EVENT_DOWNLOAD_START = 0xBB, /**< Download started event. */ ANTFS_EVENT_DOWNLOAD_COMPLETE = 0xBC, /**< Download completed event. */ ANTFS_EVENT_DOWNLOAD_FAIL = 0xBD, /**< Download failed event. */ ANTFS_EVENT_UPLOAD_REQUEST = 0xBE, /**< Upload request event. */ ANTFS_EVENT_UPLOAD_DATA = 0xBF, /**< Upload data available for read event. */ ANTFS_EVENT_UPLOAD_START = 0xC0, /**< Upload begin event. */ ANTFS_EVENT_UPLOAD_COMPLETE = 0xC1, /**< Upload completed event. */ ANTFS_EVENT_UPLOAD_FAIL = 0xC2, /**< Upload process failed event. */ ANTFS_EVENT_ERASE_REQUEST = 0xC3 /**< Erase request event. */ } antfs_event_t; /**@brief ANT-FS <-> application event communication object. */ typedef struct { antfs_event_t event; /**< ANT-FS event. */ uint16_t file_index; /**< File index (download/upload/erase). */ uint32_t offset; /**< Current offset (download/upload). */ uint32_t bytes; /**< Number of bytes in block (download/upload). */ uint16_t crc; /**< Current CRC (upload). */ uint8_t data[8]; /**< Block of data (upload). */ } antfs_event_return_t; /**@brief ANT-FS parameters. */ typedef struct { uint32_t client_serial_number; /**< Client serial number. */ uint16_t beacon_device_type; /**< Client device type. */ uint16_t beacon_device_manufacturing_id; /**< Client manufacturing ID. */ uint8_t beacon_frequency; /**< Beacon RF Frequency. */ antfs_beacon_status_byte1_t beacon_status_byte1; /**< Beacon status byte 1. */ const uint8_t * p_pass_key; /**< Pass Key. */ const uint8_t * p_remote_friendly_name; /**< Friendly Name. */ } antfs_params_t; /**@brief ANT-FS directory header. */ typedef struct { uint8_t version; /**< Version of the directory file structure. */ uint8_t length; /**< Length of each structure, in bytes. */ uint8_t time_format; /**< Defines how system keeps track of date/time stamps. */ uint8_t reserved01; uint8_t reserved02; uint8_t reserved03; uint8_t reserved04; uint8_t reserved05; uint32_t system_time; /**< Number of seconds elapsed since system power up. */ uint32_t date; /**< Number of seconds elapsed since 00:00 hrs Dec 31, 1989. If system time is unknown, used as counter. */ } antfs_dir_header_t; /**@brief ANT-FS directory entry. */ typedef struct { uint16_t data_file_index; /**< Data file index. */ uint8_t file_data_type; /**< File data type. */ uint8_t user_defined1; /**< Identifier, first byte (structure defined by data type). */ uint16_t user_defined2; /**< Identifier, last two bytes (structure defined by data type). */ uint8_t user_flags; /**< File data type specific flags (bits defined by data type). */ uint8_t general_flags; /**< Bit mapped flags of flag permissions. */ uint32_t file_size_in_bytes; /**< File size, in bytes. */ uint32_t date; /**< Number of seconds elapsed since 00:00 hrs Dec 31, 1980, if supported. */ } antfs_dir_struct_t; /**@brief ANT-FS download/upload request context. */ typedef struct { ulong_union_t file_size; /**< Size of a file to download when reading, or the size of a partially completed upload when writing. */ uint32_t max_file_size; /**< The maximum size of the file specified, this is the file size when reading, and the maximum allowed file size when writing. */ ulong_union_t max_burst_block_size; /**< Maximum burst block size. */ ushort_union_t file_index; /**< File index. */ uint16_t file_crc; /**< CRC (uploads). */ } antfs_request_info_t; /**@brief The burst wait handler can be configured by the application to customize the code that is * executed while waiting for the burst busy flag. */ typedef void(*antfs_burst_wait_handler_t)(void); /**@brief Function for setting initial ANT-FS configuration parameters. * * @param[in] p_params The initial ANT-FS configuration parameters. * @param[in] burst_wait_handler Burst wait handler. */ void antfs_init(const antfs_params_t * const p_params, antfs_burst_wait_handler_t burst_wait_handler); /**@brief Function for getting host name if received. * * @return Pointer to host name buffer if a host name was recieved, NULL otherwise. */ const char * antfs_hostname_get(void); /**@brief Function for transmitting a response to a pairing request issued by ANT-FS host. * * @param[in] accept The pairing response, true if pairing accepted. * * @retval true Operation success. Response to a pairing request was transmitted. * @retval false Operation failure. Not in pairing mode or pairing not supported by the * implementation. */ bool antfs_pairing_resp_transmit(bool accept); /**@brief Function for doing calculations prior downloading the data to the ANT-FS host. * * Function does the necessary pre processing calculations, which are required prior downloading the * data, and also transmits the download request response right away in case of the download request * was rejected or there is no data to send. * * @param[in] response The download request response code. * @param[in] p_request_info ANT-FS request info structure. */ void antfs_download_req_resp_prepare(uint8_t response, const antfs_request_info_t * const p_request_info); /**@brief Function for downloading requested data. * * @param[in] index Index of the current file downloaded. * @param[in] offset Offset specified by client. * @param[in] num_bytes Number of bytes requested to be transmitted from the buffer. * @param[in] p_message Data buffer to be transmitted. * * @return Number of data bytes transmitted. */ uint32_t antfs_input_data_download(uint16_t index, uint32_t offset, uint32_t num_bytes, const uint8_t * const p_message); /**@brief Function for transmitting upload request response to a upload request command by ANT-FS * host. * * @param[in] response The upload response code. * @param[in] p_request_info ANT-FS request info structure. * * @retval true Operation success. Response to upload request command was transmitted. * @retval false Operation failure. Upload not supported by the implementation or not in correct * state or application is sending a response for a different file * than requested. */ bool antfs_upload_req_resp_transmit(uint8_t response, const antfs_request_info_t * const p_request_info); /**@brief Function for transmitting upload data response to a upload data command by ANT-FS host. * * @param[in] data_upload_success The upload response code, true for success. * * @retval true Operation success. Response to upload data command was transmitted. * @retval false Operation failure. Upload not supported by the implementation or not in correct * state. */ bool antfs_upload_data_resp_transmit(bool data_upload_success); /**@brief Function for transmitting erase response to a erase request. * * @param[in] response The erase response code. */ void antfs_erase_req_resp_transmit(uint8_t response); /**@brief Function for extracting possible pending ANT-FS event. * * @param[out] p_event The output event structure. * * @retval true Operation success. Pending ANT-FS event available and it was copied to the output * event structure. * @retval false Operation failure. No pending ANT-FS event available. */ bool antfs_event_extract(antfs_event_return_t * const p_event); /**@brief Function for processing ANT events and data received from the ANT-FS channel. * * @param[in] p_message The message buffer containing the message received from the ANT-FS * channel. */ void antfs_message_process(uint8_t * p_message); /**@brief Function for setting up the ANT-FS channel. */ void antfs_channel_setup(void); #ifdef __cplusplus } #endif #endif // ANTFS_H__ /** *@} **/