diff --git a/bsp/ESP32_C3/.vscode/launch.json b/bsp/ESP32_C3/.vscode/launch.json new file mode 100644 index 0000000000000000000000000000000000000000..6d2236f737e3322d35589719a8e10a41581e89e4 --- /dev/null +++ b/bsp/ESP32_C3/.vscode/launch.json @@ -0,0 +1,10 @@ +{ + "version": "0.2.0", + "configurations": [ + { + "type": "espidf", + "name": "Launch", + "request": "launch" + } + ] +} \ No newline at end of file diff --git a/bsp/ESP32_C3/.vscode/settings.json b/bsp/ESP32_C3/.vscode/settings.json new file mode 100644 index 0000000000000000000000000000000000000000..0fdac30c988dda9149b0da4f46714483c3c38f44 --- /dev/null +++ b/bsp/ESP32_C3/.vscode/settings.json @@ -0,0 +1,26 @@ +{ + "C_Cpp.intelliSenseEngine": "Tag Parser", + "idf.adapterTargetName": "esp32c3", + "idf.openOcdConfigs": [ + "board/esp32c3-builtin.cfg" + ], + "idf.portWin": "COM7", + "idf.flashType": "UART", + "files.associations": { + "panic_internal.h": "c", + "rtthread.h": "c", + "bitset": "c", + "chrono": "c", + "algorithm": "c", + "rtdebug.h": "c", + "rtservice.h": "c", + "rtdef.h": "c", + "rtconfig.h": "c", + "thread": "c", + "rthw.h": "c", + "typeinfo": "c", + "serial.h": "c", + "timer.h": "c" + }, + "RTT_Studio.Build.Parallel_Jobs": "4" +} diff --git a/bsp/ESP32_C3/.vscode/tasks.json b/bsp/ESP32_C3/.vscode/tasks.json new file mode 100644 index 0000000000000000000000000000000000000000..3a649a6c699d5f56749bed9d5d0f62814b600953 --- /dev/null +++ b/bsp/ESP32_C3/.vscode/tasks.json @@ -0,0 +1,300 @@ +{ + "version": "2.0.0", + "tasks": [ + { + "label": "Build - Build project", + "type": "shell", + "command": "${config:idf.pythonBinPath} ${config:idf.espIdfPath}/tools/idf.py build", + "windows": { + "command": "${config:idf.pythonBinPathWin} ${config:idf.espIdfPathWin}\\tools\\idf.py build", + "options": { + "env": { + "PATH": "${env:PATH};${config:idf.customExtraPaths}" + } + } + }, + "options": { + "env": { + "PATH": "${env:PATH}:${config:idf.customExtraPaths}" + } + }, + "problemMatcher": [ + { + "owner": "cpp", + "fileLocation": [ + "relative", + "${workspaceFolder}" + ], + "pattern": { + "regexp": "^\\.\\.(.*):(\\d+):(\\d+):\\s+(warning|error):\\s+(.*)$", + "file": 1, + "line": 2, + "column": 3, + "severity": 4, + "message": 5 + } + }, + { + "owner": "cpp", + "fileLocation": "absolute", + "pattern": { + "regexp": "^[^\\.](.*):(\\d+):(\\d+):\\s+(warning|error):\\s+(.*)$", + "file": 1, + "line": 2, + "column": 3, + "severity": 4, + "message": 5 + } + } + ], + "group": { + "kind": "build", + "isDefault": true + } + }, + { + "label": "Set ESP-IDF Target", + "type": "shell", + "command": "${command:espIdf.setTarget}", + "problemMatcher": { + "owner": "cpp", + "fileLocation": "absolute", + "pattern": { + "regexp": "^(.*):(//d+):(//d+)://s+(warning|error)://s+(.*)$", + "file": 1, + "line": 2, + "column": 3, + "severity": 4, + "message": 5 + } + } + }, + { + "label": "Clean - Clean the project", + "type": "shell", + "command": "${config:idf.pythonBinPath} ${config:idf.espIdfPath}/tools/idf.py fullclean", + "windows": { + "command": "${config:idf.pythonBinPathWin} ${config:idf.espIdfPathWin}\\tools\\idf.py fullclean", + "options": { + "env": { + "PATH": "${env:PATH};${config:idf.customExtraPaths}" + } + } + }, + "options": { + "env": { + "PATH": "${env:PATH}:${config:idf.customExtraPaths}" + } + }, + "problemMatcher": [ + { + "owner": "cpp", + "fileLocation": [ + "relative", + "${workspaceFolder}" + ], + "pattern": { + "regexp": "^\\.\\.(.*):(\\d+):(\\d+):\\s+(warning|error):\\s+(.*)$", + "file": 1, + "line": 2, + "column": 3, + "severity": 4, + "message": 5 + } + }, + { + "owner": "cpp", + "fileLocation": "absolute", + "pattern": { + "regexp": "^[^\\.](.*):(\\d+):(\\d+):\\s+(warning|error):\\s+(.*)$", + "file": 1, + "line": 2, + "column": 3, + "severity": 4, + "message": 5 + } + } + ] + }, + { + "label": "Flash - Flash the device", + "type": "shell", + "command": "${config:idf.pythonBinPath} ${config:idf.espIdfPath}/tools/idf.py -p ${config:idf.port} -b ${config:idf.flashBaudRate} flash", + "windows": { + "command": "${config:idf.pythonBinPathWin} ${config:idf.espIdfPathWin}\\tools\\idf.py flash -p ${config:idf.portWin} -b ${config:idf.flashBaudRate}", + "options": { + "env": { + "PATH": "${env:PATH};${config:idf.customExtraPaths}" + } + } + }, + "options": { + "env": { + "PATH": "${env:PATH}:${config:idf.customExtraPaths}" + } + }, + "problemMatcher": [ + { + "owner": "cpp", + "fileLocation": [ + "relative", + "${workspaceFolder}" + ], + "pattern": { + "regexp": "^\\.\\.(.*):(\\d+):(\\d+):\\s+(warning|error):\\s+(.*)$", + "file": 1, + "line": 2, + "column": 3, + "severity": 4, + "message": 5 + } + }, + { + "owner": "cpp", + "fileLocation": "absolute", + "pattern": { + "regexp": "^[^\\.](.*):(\\d+):(\\d+):\\s+(warning|error):\\s+(.*)$", + "file": 1, + "line": 2, + "column": 3, + "severity": 4, + "message": 5 + } + } + ] + }, + { + "label": "Monitor: Start the monitor", + "type": "shell", + "command": "${config:idf.pythonBinPath} ${config:idf.espIdfPath}/tools/idf.py -p ${config:idf.port} monitor", + "windows": { + "command": "${config:idf.pythonBinPathWin} ${config:idf.espIdfPathWin}\\tools\\idf.py -p ${config:idf.portWin} monitor", + "options": { + "env": { + "PATH": "${env:PATH};${config:idf.customExtraPaths}" + } + } + }, + "options": { + "env": { + "PATH": "${env:PATH}:${config:idf.customExtraPaths}" + } + }, + "problemMatcher": [ + { + "owner": "cpp", + "fileLocation": [ + "relative", + "${workspaceFolder}" + ], + "pattern": { + "regexp": "^\\.\\.(.*):(\\d+):(\\d+):\\s+(warning|error):\\s+(.*)$", + "file": 1, + "line": 2, + "column": 3, + "severity": 4, + "message": 5 + } + }, + { + "owner": "cpp", + "fileLocation": "absolute", + "pattern": { + "regexp": "^[^\\.](.*):(\\d+):(\\d+):\\s+(warning|error):\\s+(.*)$", + "file": 1, + "line": 2, + "column": 3, + "severity": 4, + "message": 5 + } + } + ], + "dependsOn": "Flash - Flash the device" + }, + { + "label": "OpenOCD: Start openOCD", + "type": "shell", + "presentation": { + "echo": true, + "reveal": "never", + "focus": false, + "panel": "new" + }, + "command": "openocd -s ${command:espIdf.getOpenOcdScriptValue} ${command:espIdf.getOpenOcdConfigs}", + "windows": { + "command": "openocd.exe -s ${command:espIdf.getOpenOcdScriptValue} ${command:espIdf.getOpenOcdConfigs}", + "options": { + "env": { + "PATH": "${env:PATH};${config:idf.customExtraPaths}" + } + } + }, + "options": { + "env": { + "PATH": "${env:PATH}:${config:idf.customExtraPaths}" + } + }, + "problemMatcher": { + "owner": "cpp", + "fileLocation": "absolute", + "pattern": { + "regexp": "^(.*):(\\d+):(\\d+):\\s+(warning|error):\\s+(.*)$", + "file": 1, + "line": 2, + "column": 3, + "severity": 4, + "message": 5 + } + } + }, + { + "label": "adapter", + "type": "shell", + "command": "${config:idf.pythonBinPath}", + "isBackground": true, + "options": { + "env": { + "PATH": "${env:PATH}:${config:idf.customExtraPaths}", + "PYTHONPATH": "${command:espIdf.getExtensionPath}/esp_debug_adapter/debug_adapter" + } + }, + "problemMatcher": { + "background": { + "beginsPattern": "\bDEBUG_ADAPTER_STARTED\b", + "endsPattern": "DEBUG_ADAPTER_READY2CONNECT", + "activeOnStart": true + }, + "pattern": { + "regexp": "(\\d+)-(\\d+)-(\\d+)\\s(\\d+):(\\d+):(\\d+),(\\d+)\\s-(.+)\\s(ERROR)", + "file": 8, + "line": 2, + "column": 3, + "severity": 4, + "message": 9 + } + }, + "args": [ + "${command:espIdf.getExtensionPath}/esp_debug_adapter/debug_adapter_main.py", + "-e", + "${workspaceFolder}/build/${command:espIdf.getProjectName}.elf", + "-s", + "${command:espIdf.getOpenOcdScriptValue}", + "-ip", + "localhost", + "-dn", + "${config:idf.adapterTargetName}", + "-om", + "connect_to_instance" + ], + "windows": { + "command": "${config:idf.pythonBinPathWin}", + "options": { + "env": { + "PATH": "${env:PATH};${config:idf.customExtraPaths}", + "PYTHONPATH": "${command:espIdf.getExtensionPath}/esp_debug_adapter/debug_adapter" + } + } + } + } + ] +} \ No newline at end of file diff --git a/bsp/ESP32_C3/0001-add-fixed-of-rtthread.patch b/bsp/ESP32_C3/0001-add-fixed-of-rtthread.patch new file mode 100644 index 0000000000000000000000000000000000000000..afcf39a398cf714fe3025c356969dd917d96a1e6 --- /dev/null +++ b/bsp/ESP32_C3/0001-add-fixed-of-rtthread.patch @@ -0,0 +1,429 @@ +From 8c8c4bd282ed5bf359ef1c0eaeace4c4fbe8ff52 Mon Sep 17 00:00:00 2001 +From: supperthomas <78900636@qq.com> +Date: Mon, 18 Apr 2022 22:59:02 +0800 +Subject: [PATCH] add fixed of rtthread + +--- + .../esp_system/ld/esp32c3/sections.ld.in | 19 ++ + components/freertos/port/port_common.c | 11 +- + components/freertos/port/port_systick.c | 56 ++--- + components/riscv/vectors.S | 236 +++++++++++++++--- + 4 files changed, 254 insertions(+), 68 deletions(-) + +diff --git a/components/esp_system/ld/esp32c3/sections.ld.in b/components/esp_system/ld/esp32c3/sections.ld.in +index 0ebeda06c1..10506d38a3 100644 +--- a/components/esp_system/ld/esp32c3/sections.ld.in ++++ b/components/esp_system/ld/esp32c3/sections.ld.in +@@ -183,6 +183,25 @@ SECTIONS + _noinit_end = ABSOLUTE(.); + } > dram0_0_seg + ++ .stack_dummy (COPY): ++ { ++ . = ALIGN(8); ++ __STACKSIZE__ = 40960; ++ __stack_start__ = .; ++ *(.stack*) ++ . += __STACKSIZE__; ++ __stack_cpu0 = .; ++ __stack_end__ = .; ++ } > dram0_0_seg ++ ++ .stack_dummy (COPY): ++ { ++ . = ALIGN(8); ++ __HEAPSIZE__ = 40960; ++ __heap_start__ = .; ++ . += __STACKSIZE__; ++ __heap_end__ = .; ++ } > dram0_0_seg + /* Shared RAM */ + .dram0.bss (NOLOAD) : + { +diff --git a/components/freertos/port/port_common.c b/components/freertos/port/port_common.c +index ffca3d5429..dd3cc46f16 100644 +--- a/components/freertos/port/port_common.c ++++ b/components/freertos/port/port_common.c +@@ -74,11 +74,12 @@ void esp_startup_start_app_common(void) + esp_gdbstub_init(); + #endif // CONFIG_ESP_SYSTEM_GDBSTUB_RUNTIME + +- portBASE_TYPE res = xTaskCreatePinnedToCore(&main_task, "main", +- ESP_TASK_MAIN_STACK, NULL, +- ESP_TASK_MAIN_PRIO, NULL, ESP_TASK_MAIN_CORE); +- assert(res == pdTRUE); +- (void)res; ++ // portBASE_TYPE res = xTaskCreatePinnedToCore(&main_task, "main", ++ // ESP_TASK_MAIN_STACK, NULL, ++ // ESP_TASK_MAIN_PRIO, NULL, ESP_TASK_MAIN_CORE); ++ ///assert(res == pdTRUE); ++ app_main(); ++ //(void)res; + } + + static void main_task(void* args) +diff --git a/components/freertos/port/port_systick.c b/components/freertos/port/port_systick.c +index 0c14a155a1..cf525f9383 100644 +--- a/components/freertos/port/port_systick.c ++++ b/components/freertos/port/port_systick.c +@@ -116,34 +116,34 @@ void vPortSetupTimer(void) + */ + IRAM_ATTR void SysTickIsrHandler(void *arg) + { +- uint32_t cpuid = xPortGetCoreID(); +- systimer_hal_context_t *systimer_hal = (systimer_hal_context_t *)arg; +-#ifdef CONFIG_PM_TRACE +- ESP_PM_TRACE_ENTER(TICK, cpuid); +-#endif +- +- uint32_t alarm_id = SYSTIMER_LL_ALARM_OS_TICK_CORE0 + cpuid; +- do { +- systimer_ll_clear_alarm_int(systimer_hal->dev, alarm_id); +- +- uint32_t diff = systimer_hal_get_counter_value(systimer_hal, SYSTIMER_LL_COUNTER_OS_TICK) / systimer_ll_get_alarm_period(systimer_hal->dev, alarm_id) - s_handled_systicks[cpuid]; +- if (diff > 0) { +- if (s_handled_systicks[cpuid] == 0) { +- s_handled_systicks[cpuid] = diff; +- diff = 1; +- } else { +- s_handled_systicks[cpuid] += diff; +- } +- +- do { +- xPortSysTickHandler(); +- } while (--diff); +- } +- } while (systimer_ll_is_alarm_int_fired(systimer_hal->dev, alarm_id)); +- +-#ifdef CONFIG_PM_TRACE +- ESP_PM_TRACE_EXIT(TICK, cpuid); +-#endif ++// uint32_t cpuid = xPortGetCoreID(); ++// systimer_hal_context_t *systimer_hal = (systimer_hal_context_t *)arg; ++// #ifdef CONFIG_PM_TRACE ++// ESP_PM_TRACE_ENTER(TICK, cpuid); ++// #endif ++ ++// uint32_t alarm_id = SYSTIMER_LL_ALARM_OS_TICK_CORE0 + cpuid; ++// do { ++// systimer_ll_clear_alarm_int(systimer_hal->dev, alarm_id); ++ ++// uint32_t diff = systimer_hal_get_counter_value(systimer_hal, SYSTIMER_LL_COUNTER_OS_TICK) / systimer_ll_get_alarm_period(systimer_hal->dev, alarm_id) - s_handled_systicks[cpuid]; ++// if (diff > 0) { ++// if (s_handled_systicks[cpuid] == 0) { ++// s_handled_systicks[cpuid] = diff; ++// diff = 1; ++// } else { ++// s_handled_systicks[cpuid] += diff; ++// } ++ ++// do { ++// xPortSysTickHandler(); ++// } while (--diff); ++// } ++// } while (systimer_ll_is_alarm_int_fired(systimer_hal->dev, alarm_id)); ++ ++// #ifdef CONFIG_PM_TRACE ++// ESP_PM_TRACE_EXIT(TICK, cpuid); ++// #endif + } + + #endif // CONFIG_FREERTOS_SYSTICK_USES_CCOUNT +diff --git a/components/riscv/vectors.S b/components/riscv/vectors.S +index 1006d5bea5..91bb4aa39e 100644 +--- a/components/riscv/vectors.S ++++ b/components/riscv/vectors.S +@@ -17,6 +17,9 @@ + #include "soc/soc_caps.h" + #include "sdkconfig.h" + ++#define STORE sw ++#define LOAD lw ++#define REGBYTES 4 + + .equ SAVE_REGS, 32 + .equ CONTEXT_SIZE, (SAVE_REGS * 4) +@@ -218,25 +221,25 @@ _call_panic_handler: + */ + .global _interrupt_handler + .type _interrupt_handler, @function +-_interrupt_handler: ++_interrupt_handler1: + /* entry */ +- save_regs +- save_mepc ++ save_regs /* 保存寄存器 */ ++ save_mepc /* 保存MEPC */ + + /* Before doing anythig preserve the stack pointer */ + /* It will be saved in current TCB, if needed */ +- mv a0, sp ++ mv a0, sp /* 保存SP a0 = sp */ + call rtos_int_enter + + /* Before dispatch c handler, restore interrupt to enable nested intr */ +- csrr s1, mcause +- csrr s2, mstatus ++ csrr s1, mcause /* 保存mcause s1 = mcause */ ++ csrr s2, mstatus /* 保存mstatus s2 = mstatus */ + +- /* Save the interrupt threshold level */ +- la t0, INTERRUPT_CORE0_CPU_INT_THRESH_REG +- lw s3, 0(t0) ++ /* Save the interrupt threshold level 保存中断嵌套层数? */ ++ la t0, INTERRUPT_CORE0_CPU_INT_THRESH_REG /* 保存mstatus t0 = &INTERRUPT_CORE0_CPU_INT_THRESH_REG */ ++ lw s3, 0(t0) /* s3 = mstatus */ + +- /* Increase interrupt threshold level */ ++ /* Increase interrupt threshold level 增加中断嵌套层数*/ + li t2, 0x7fffffff + and t1, s1, t2 /* t1 = mcause & mask */ + slli t1, t1, 2 /* t1 = mcause * 4 */ +@@ -247,56 +250,219 @@ _interrupt_handler: + sw t2, 0(t0) /* INTERRUPT_CORE0_CPU_INT_THRESH_REG = t2 */ + fence + +- li t0, 0x8 +- csrrs t0, mstatus, t0 +- +- #ifdef CONFIG_PM_TRACE +- li a0, 0 /* = ESP_PM_TRACE_IDLE */ +- #if SOC_CPU_CORES_NUM == 1 +- li a1, 0 /* No need to check core ID on single core hardware */ +- #else +- csrr a1, mhartid +- #endif +- la t0, esp_pm_trace_exit +- jalr t0 /* absolute jump, avoid the 1 MiB range constraint */ +- #endif ++ li t0, 0x8 /* t0 = 8 */ ++ csrrs t0, mstatus, t0 /*设置状态MIE寄存器，开总中断*/ + +- #ifdef CONFIG_PM_ENABLE +- la t0, esp_pm_impl_isr_hook +- jalr t0 /* absolute jump, avoid the 1 MiB range constraint */ +- #endif + + /* call the C dispatcher */ + mv a0, sp /* argument 1, stack pointer */ + mv a1, s1 /* argument 2, interrupt number (mcause) */ +- /* mask off the interrupt flag of mcause */ ++ /* mask off the interrupt flag of mcause 屏幕异常中断*/ + li t0, 0x7fffffff + and a1, a1, t0 + jal _global_interrupt_handler + +- /* After dispatch c handler, disable interrupt to make freertos make context switch */ ++ /* After dispatch c handler, disable interrupt to make freertos make context switch ++ 在调用c函数之后，disable 中断让freertos能够做内容切换 ++ */ + + li t0, 0x8 +- csrrc t0, mstatus, t0 ++ csrrc t0, mstatus, t0 /*清状态MIE寄存器 关总中断*/ + +- /* restore the interrupt threshold level */ ++ ++ /* restore the interrupt threshold level 中断嵌套 */ + la t0, INTERRUPT_CORE0_CPU_INT_THRESH_REG + sw s3, 0(t0) + fence + + /* Yield to the next task is needed: */ +- mv a0, sp ++ mv a0, sp /* a0 = sp*/ + call rtos_int_exit + + /* The next (or current) stack pointer is returned in a0 */ +- mv sp, a0 ++ mv sp, a0 /* sp = a0*/ + + /* restore the rest of the registers */ +- csrw mcause, s1 +- csrw mstatus, s2 ++ csrw mcause, s1 /* mcause = s1 */ ++ csrw mstatus, s2 /* mstatus = s2 */ + restore_mepc + restore_regs + + /* exit, this will also re-enable the interrupts */ + mret ++ .size _interrupt_handler1, .-_interrupt_handler1 ++ ++ ++ ++_interrupt_handler: ++ /* 此时CPU的sp = from_thread->sp */ ++ /* 注意： 在这里，并没有将mepc的值赋值为from_thread栈中的epc，但后面会赋值 */ ++ addi sp, sp, -32 * REGBYTES /* sp = sp - 32 * 4 栈指针向下偏移32个寄存器长度，用来将CPU的寄存器保存到from_thread的栈中*/ ++ STORE x1, 1 * REGBYTES(sp) /* 将CPU的x1寄存器，即ra寄存器，保存到from_thread->栈中 */ ++ ++ li t0, 0x80 /* t0 = 0x80 */ ++ STORE t0, 2 * REGBYTES(sp) /* mstatus = t0, 即关闭全局中断 */ ++ ++ /* 将 CPU 的其他寄存器的值，保存到from_thread的任务栈中 */ ++ STORE x4, 4 * REGBYTES(sp) ++ STORE x5, 5 * REGBYTES(sp) ++ STORE x6, 6 * REGBYTES(sp) ++ STORE x7, 7 * REGBYTES(sp) ++ STORE x8, 8 * REGBYTES(sp) ++ STORE x9, 9 * REGBYTES(sp) ++ STORE x10, 10 * REGBYTES(sp) ++ STORE x11, 11 * REGBYTES(sp) ++ STORE x12, 12 * REGBYTES(sp) ++ STORE x13, 13 * REGBYTES(sp) ++ STORE x14, 14 * REGBYTES(sp) ++ STORE x15, 15 * REGBYTES(sp) ++ STORE x16, 16 * REGBYTES(sp) ++ STORE x17, 17 * REGBYTES(sp) ++ STORE x18, 18 * REGBYTES(sp) ++ STORE x19, 19 * REGBYTES(sp) ++ STORE x20, 20 * REGBYTES(sp) ++ STORE x21, 21 * REGBYTES(sp) ++ STORE x22, 22 * REGBYTES(sp) ++ STORE x23, 23 * REGBYTES(sp) ++ STORE x24, 24 * REGBYTES(sp) ++ STORE x25, 25 * REGBYTES(sp) ++ STORE x26, 26 * REGBYTES(sp) ++ STORE x27, 27 * REGBYTES(sp) ++ STORE x28, 28 * REGBYTES(sp) ++ STORE x29, 29 * REGBYTES(sp) ++ STORE x30, 30 * REGBYTES(sp) ++ STORE x31, 31 * REGBYTES(sp) ++ ++ /* 备份 CPU 的 sp (这时，CPU的sp其实就是from thread的sp指针) 寄存器的值到 s0 寄存器中，下面会使用s0，恢复 CPU 的寄存器 */ ++ move s0, sp /* s0 = sp */ ++ ++ /* 在中断函数中，中断函数中调用的C函数，需要使用 sp， 这里，在中断函数中，使用的 sp 为，系统的栈资源 */ ++ /* switch to interrupt stack */ ++ la sp, __stack_end__ /* sp = _sp */ ++ ++ /* interrupt handle */ ++ /* 注意： 在调用C函数之前,比如sp的值为0x30001000, 在执行完C函数后，sp的值还是会变成 0x30001000 */ ++ call rt_interrupt_enter /* 执行所有的中断函数前，调用该函数 */ ++ ++ csrr s1, mcause ++ csrr s2, mstatus ++ ++ /* Save the interrupt threshold level */ ++ la t0, INTERRUPT_CORE0_CPU_INT_THRESH_REG ++ lw s3, 0(t0) ++ ++ li t2, 0x7fffffff ++ and t1, s1, t2 /* t1 = mcause & mask */ ++ slli t1, t1, 2 /* t1 = mcause * 4 */ ++ la t2, INTC_INT_PRIO_REG(0) ++ add t1, t2, t1 /* t1 = INTC_INT_PRIO_REG + 4 * mcause */ ++ lw t2, 0(t1) /* t2 = INTC_INT_PRIO_REG[mcause] */ ++ addi t2, t2, 1 /* t2 = t2 +1 */ ++ sw t2, 0(t0) /* INTERRUPT_CORE0_CPU_INT_THRESH_REG = t2 */ ++ fence ++ ++ li t0, 0x8 ++ csrrs t0, mstatus, t0 ++ ++ /* call the C dispatcher */ ++ mv a0, sp /* argument 1, stack pointer */ ++ mv a1, s1 /* argument 2, interrupt number (mcause) */ ++ /* mask off the interrupt flag of mcause */ ++ li t0, 0x7fffffff ++ and a1, a1, t0 ++ jal _global_interrupt_handler ++ ++ li t0, 0x8 ++ csrrc t0, mstatus, t0 ++ ++ /* restore the interrupt threshold level */ ++ la t0, INTERRUPT_CORE0_CPU_INT_THRESH_REG ++ sw s3, 0(t0) ++ fence ++ ++ call rt_interrupt_leave /* 执行所有的中断函数后，调用该函数 */ ++ ++ /* 上面，将保存执行中断服务函数之前的CPU的sp寄存器到了s0所指向的位置处，当执行完中断服务函数，需要将之前的CPU寄存器，恢复一下,此时sp又变成了from thread的sp了 */ ++ move sp, s0 /* sp = s0 */ ++ ++ /* 下面两句话，相当于将 rt_thread_switch_interrupt_flag 值，赋值给了s2 */ ++ /* 将 rt_thread_switch_interrupt_flag 的地址值，赋值给 s0 寄存器*/ ++ la s0, rt_thread_switch_interrupt_flag /* s0 = &rt_thread_switch_interrupt_flag */ ++ /* 将 s0 所指向的地址处的内容，取出来，赋值给 s2 寄存器，其实就是将 rt_thread_switch_interrupt_flag 的值，赋值给了 s2 寄存器*/ ++ lw s2, 0(s0) /* s2 = *s0 = rt_thread_switch_interrupt_flag */ ++ ++ /* 如果 s2的值，即 rt_thread_switch_interrupt_flag 值，如果不为0，则需要继续执行下一条指令，如果为0，则需要跳转到 spurious_interrupt 标号处 执行 */ ++ /* 如果 s2的值等于0，rt_thread_switch_interrupt_flag等于0， 则不需要在中断处理函数中，进行上下文切换，反之则需要 */ ++ /* 如果不需要上下文切换， */ ++ ++ /* 在这里，跳转到 spurious_interrupt的话，是不会进行上下文切换的，因为，此时CPU的sp指针还是from线程的*/ ++ beqz s2, spurious_interrupt /* if (s2 == 0) goto spurious_interrupt; else 执行下一条语句*/ ++ ++ /* 需要上下文切换： 主要目的是将CPU的sp指针，赋值为to_thread的sp */ ++ ++ /* 将 s0 所执向的地址的内容设置为0， 也就是，将变量 rt_thread_switch_interrupt_flag 赋值为了 0 */ ++ /* s0存放的值是 rt_thread_switch_interrupt_flag 变量的地址*/ ++ sw zero, 0(s0) /* *s0 = 0; 也就是 rt_thread_switch_interrupt_flag = 0 */ ++ /* 将 mepc 的值，赋值给 a0 寄存器，mepc 的值是，跳转到中断函数执行之前的 PC 指针 */ ++ /* 这时的mpec其实，还是from线程，在跳转到中断执行前的一个PC地址 */ ++ csrr a0, mepc /* a0 = mepc */ ++ ++ /* 将 mpec 的值写回到freom thread任务栈中的 epc 中,待后续，恢复from线程时，使用 */ ++ STORE a0, 0 * REGBYTES(sp) /* from_thread->sp->epc = a0 ，中断入口处*/ ++ ++ /* 将from_thread的sp指针，赋值为CPU的sp指针 */ ++ la s0, rt_interrupt_from_thread /* s0 = &rt_interrupt_from_thread 注意： rt_interrupt_from_thread = &(from_thread->sp) */ ++ LOAD s1, 0(s0) /* s1 = rt_interrupt_from_thread，也就是s1 = &(from_thread->sp) */ ++ STORE sp, 0(s1) /* from_thread->sp = sp*/ ++ ++ /* 接下来，需要开始恢复CPU的sp为to_thread的sp了 */ ++ la s0, rt_interrupt_to_thread /* s0 = &rt_interrupt_to_thread 注意： rt_interrupt_to_thread = &(to_thred->sp)*/ ++ LOAD s1, 0(s0) /* s1 = rt_interrupt_to_thread, 也就是s1 = &(to_thred->sp) */ ++ LOAD sp, 0(s1) /* sp = (to_thred->sp)*/ ++ ++ /* 将CPU的 mepc设置为to_thred的mepc，待中断退出，执行mret指令后，将从该地址开始执行 */ ++ LOAD a0, 0 * REGBYTES(sp) /* a0 = to_thread的mepc的值*/ ++ csrw mepc, a0 /* mepc = a0 */ ++ ++ ++spurious_interrupt: ++ LOAD x1, 1 * REGBYTES(sp) ++ ++ /* Remain in M-mode after mret */ ++ li t0, 0x00001800 ++ csrs mstatus, t0 ++ LOAD t0, 2 * REGBYTES(sp) ++ csrs mstatus, t0 ++ ++ LOAD x4, 4 * REGBYTES(sp) ++ LOAD x5, 5 * REGBYTES(sp) ++ LOAD x6, 6 * REGBYTES(sp) ++ LOAD x7, 7 * REGBYTES(sp) ++ LOAD x8, 8 * REGBYTES(sp) ++ LOAD x9, 9 * REGBYTES(sp) ++ LOAD x10, 10 * REGBYTES(sp) ++ LOAD x11, 11 * REGBYTES(sp) ++ LOAD x12, 12 * REGBYTES(sp) ++ LOAD x13, 13 * REGBYTES(sp) ++ LOAD x14, 14 * REGBYTES(sp) ++ LOAD x15, 15 * REGBYTES(sp) ++ LOAD x16, 16 * REGBYTES(sp) ++ LOAD x17, 17 * REGBYTES(sp) ++ LOAD x18, 18 * REGBYTES(sp) ++ LOAD x19, 19 * REGBYTES(sp) ++ LOAD x20, 20 * REGBYTES(sp) ++ LOAD x21, 21 * REGBYTES(sp) ++ LOAD x22, 22 * REGBYTES(sp) ++ LOAD x23, 23 * REGBYTES(sp) ++ LOAD x24, 24 * REGBYTES(sp) ++ LOAD x25, 25 * REGBYTES(sp) ++ LOAD x26, 26 * REGBYTES(sp) ++ LOAD x27, 27 * REGBYTES(sp) ++ LOAD x28, 28 * REGBYTES(sp) ++ LOAD x29, 29 * REGBYTES(sp) ++ LOAD x30, 30 * REGBYTES(sp) ++ LOAD x31, 31 * REGBYTES(sp) ++ ++ addi sp, sp, 32 * REGBYTES ++ mret + .size _interrupt_handler, .-_interrupt_handler +-- +2.35.1.windows.2 + diff --git a/bsp/ESP32_C3/CMakeLists.txt b/bsp/ESP32_C3/CMakeLists.txt new file mode 100644 index 0000000000000000000000000000000000000000..0c4ba04a556cc7dad244ec9d836ec814f613d1d6 --- /dev/null +++ b/bsp/ESP32_C3/CMakeLists.txt @@ -0,0 +1,6 @@ +# The following lines of boilerplate have to be in your project's +# CMakeLists in this exact order for cmake to work correctly +cmake_minimum_required(VERSION 3.5) + +include($ENV{IDF_PATH}/tools/cmake/project.cmake) +project(rtthread) diff --git a/bsp/ESP32_C3/Makefile b/bsp/ESP32_C3/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..fdb56fa3951db52efef5b8039b2acabe530679b0 --- /dev/null +++ b/bsp/ESP32_C3/Makefile @@ -0,0 +1,8 @@ +# +# This is a project Makefile. It is assumed the directory this Makefile resides in is a +# project subdirectory. +# + +PROJECT_NAME := rtthread + +include $(IDF_PATH)/make/project.mk diff --git a/bsp/ESP32_C3/README.md b/bsp/ESP32_C3/README.md new file mode 100644 index 0000000000000000000000000000000000000000..011b3a2655d5d7f9a048513d6e7b8873cf8b815f --- /dev/null +++ b/bsp/ESP32_C3/README.md @@ -0,0 +1,89 @@ + +# ESP32-C3 BSP 说明 + +## 简介 + +本文档为 乐鑫ESP32-C3 开发板的[ESP32C3](http://luatos.com/t/esp32c3) BSP (板级支持包) 说明。 + +主要内容如下： + +- 开发板资源介绍 +- BSP 快速上手 + +通过阅读快速上手章节开发者可以快速地上手该 BSP，将 RT-Thread 运行在开发板上。 + +## 开发板介绍 + +目前测试了两款开发板，运行都正常，由于两款开发板LED小灯引脚不同，请根据自己开发板修改GPIO引脚，目前默认使用的开发板是LUATOS_ESP32C3。已测开发板外观如下图所示： + +- [LUATOS_ESP32C3](https://wiki.luatos.com/chips/esp32c3/board.html) + +![LUATOS_ESP32C3](images/luatos_esp32c3.png) + +- [HX-DK-商](https://docs.wireless-tech.cn/doc/7/) + +![hongxu](images/hx_shang.png) + + + +该LUATOS_ESP32C3开发板常用 **板载资源** 如下： + +- MCU：[esp32-c3](https://www.espressif.com/sites/default/files/documentation/esp32-c3_datasheet_en.pdf)，主频 160MHz， 407.22 CoreMark; 2.55 CoreMark/MHz +- 芯片内置：384KB ROM, 400KB SRAM, +- 常用外设 + - 红色LED：2个，D4 (IO12), D5（IO13） + - 按键：2个，K1（BOOT） K2(RST) + - SPI FLASH: 2M +- 常用接口：USB UART等 + +开发板更多详细信息请参考 [ESP32-C3开发板介绍](https://wiki.luatos.com/chips/esp32c3/board.html)。 + +## 外设支持 + +本 BSP 目前对外设的支持情况如下： + +| **片上外设** | **支持情况** | **备注** | +| :----------------- | :----------: | :------------------------------------- | +| GPIO | 待支持 | | +| UART | 待支持 | | + +## 使用说明 + +### 快速上手 + +说先要搭建IDE开发环境，乐鑫官方推荐使用IDF开发。 + +IDF的搭建方法有很多种，尝试了很多种方法之后，总结了一个最快速的方法，并且可以使用vscode跨平台安装，非常简单方便，具体方法见链接[ESP-IDF 一键式搭建环境基于VSCODE](https://blog.csdn.net/lt6210925/article/details/123699249)。 安装的时候IDF版本请选择IDF 4.4版本。如果你对官方IDF命令行的方式熟悉的话，你也可以使用命令行的方式，这边已经测试过，是可以使用的。 + +### IDF patch加载 + +由于IDF使用的是FREERTOS需要修改一些文件，将`0001-add-fixed-of-rtthread.patch` 这个文件拷贝到安装的时候的IDF的代码目录，执行命令 `git apply 0001-add-fixed-of-rtthread.patch` 打上patch + +#### 编译下载 + +编译选择最下面的按钮： + +![build](images/build.png) + +这边通常采用串口下载，需要根据你自己开发板选择对应的串口（如果有JTAG的，也可以用JTAG下载和调试） + +![burn](images/burn.png) + +#### 运行结果 + +下载程序成功之后，系统会运行，红色的 D4以 1S 周期闪烁。 +刚接触ESP32, 目前仅实现LED小灯闪烁，可以print打印，后续计划将pin设备和console对接上去，也欢迎大家一起来贡献，感兴趣的可以通过公众号`Thomas的小火车`来联系 + +## 注意事项 + +- 目前RTTHREAD支持起来了，后续会需要继续完善一些其他功能，刚开始使用ESP32，欢迎小伙伴一起来讨论和贡献。 + +## 联系人信息 + +维护人: + +- [supperthomas](https://github.com/supperthomas) 邮箱：<78900636@qq.com> + +## 特别感谢 + +- 感谢[chenyingchun0312](https://github.com/chenyingchun0312) 提供了RISCV的强力支持 diff --git a/bsp/ESP32_C3/images/build.png b/bsp/ESP32_C3/images/build.png new file mode 100644 index 0000000000000000000000000000000000000000..252b1129c455281af690ad8cc667e80bb0ce6166 Binary files /dev/null and b/bsp/ESP32_C3/images/build.png differ diff --git a/bsp/ESP32_C3/images/burn.png b/bsp/ESP32_C3/images/burn.png new file mode 100644 index 0000000000000000000000000000000000000000..8d23cc39eab3fc7e2b8403e20fab8503796f28a4 Binary files /dev/null and b/bsp/ESP32_C3/images/burn.png differ diff --git a/bsp/ESP32_C3/images/hx_shang.png b/bsp/ESP32_C3/images/hx_shang.png new file mode 100644 index 0000000000000000000000000000000000000000..736923aa831a7ccbaf887fdf9b0ecb5f0ec97ade Binary files /dev/null and b/bsp/ESP32_C3/images/hx_shang.png differ diff --git a/bsp/ESP32_C3/images/luatos_esp32c3.png b/bsp/ESP32_C3/images/luatos_esp32c3.png new file mode 100644 index 0000000000000000000000000000000000000000..5503af8690a4d69cf50f5ad7745e7e223843da92 Binary files /dev/null and b/bsp/ESP32_C3/images/luatos_esp32c3.png differ diff --git a/bsp/ESP32_C3/main/CMakeLists.txt b/bsp/ESP32_C3/main/CMakeLists.txt new file mode 100644 index 0000000000000000000000000000000000000000..3c62d55bde413aa687e9a6b8329d6105d2b411db --- /dev/null +++ b/bsp/ESP32_C3/main/CMakeLists.txt @@ -0,0 +1,23 @@ +idf_component_register(SRCS "main.c" + "../../../libcpu/risc-v/common/cpuport.c" + "../../../libcpu/risc-v/common/context_gcc.S" + "../../../src/components.c" + "../../../src/scheduler.c" + "../../../src/device.c" + "../../../src/clock.c" + "../../../src/irq.c" + "../../../src/thread.c" + "../../../src/mempool.c" + "../../../src/ipc.c" + "../../../src/mem.c" + "../../../src/object.c" + "../../../src/idle.c" + "../../../src/timer.c" + "../../../src/kservice.c" + INCLUDE_DIRS + "../../../include" + "../../../libcpu/risc-v/common" + "../") +ADD_DEFINITIONS( + -D__RTTHREAD__ +) \ No newline at end of file diff --git a/bsp/ESP32_C3/main/main.c b/bsp/ESP32_C3/main/main.c new file mode 100644 index 0000000000000000000000000000000000000000..56fc9ee2c2f7b2330143238e58260c2d654ef976 --- /dev/null +++ b/bsp/ESP32_C3/main/main.c @@ -0,0 +1,133 @@ +/* + * Copyright (c) 2021-2021, RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2022-04-24 supperthomas first version + */ +#include +#include "driver/gpio.h" + + +#include "esp_private/panic_internal.h" +#include "hal/uart_hal.h" +#include "driver/timer.h" +#include "soc/periph_defs.h" +#include "hal/systimer_hal.h" +#include "hal/systimer_ll.h" +#include "esp_intr_alloc.h" + +#include "rtthread.h" +#include "rthw.h" + + +void main_thread_entry(void *parameter) +{ +#define BLINK_GPIO 12 + gpio_reset_pin(BLINK_GPIO); + gpio_set_direction(BLINK_GPIO, GPIO_MODE_OUTPUT); + while (1) + { + gpio_set_level(BLINK_GPIO, 1); + rt_thread_mdelay(1000); + gpio_set_level(BLINK_GPIO, 0); + rt_thread_mdelay(1000); + } +} +void rt_application_init(void) +{ + rt_thread_t tid; + +#define RT_MAIN_THREAD_STACK_SIZE 2048 +#define RT_MAIN_THREAD_PRIORITY 10 + + tid = rt_thread_create("main", main_thread_entry, RT_NULL, + RT_MAIN_THREAD_STACK_SIZE, RT_MAIN_THREAD_PRIORITY, 20); + RT_ASSERT(tid != RT_NULL); + + rt_thread_startup(tid); +} + +//component +static uint32_t uwTick = 0; +static systimer_hal_context_t systimer_hal; +IRAM_ATTR void rt_SysTickIsrHandler(void *arg) +{ + systimer_ll_clear_alarm_int(systimer_hal.dev, 1); + rt_interrupt_enter(); + + rt_tick_increase(); + uwTick++; + /* leave interrupt */ + rt_interrupt_leave(); + systimer_ll_is_alarm_int_fired(systimer_hal.dev, 1); +} +void rt_hw_systick_init(void) +{ + uint8_t system_timer_counter=1; + + //rt_hw_interrupt_enable(0); + esp_intr_alloc(ETS_SYSTIMER_TARGET1_EDGE_INTR_SOURCE, ESP_INTR_FLAG_IRAM | ESP_INTR_FLAG_LEVEL1, rt_SysTickIsrHandler, &systimer_hal, NULL); + systimer_hal_init(&systimer_hal); + systimer_ll_set_counter_value(systimer_hal.dev, system_timer_counter, 0); + systimer_ll_apply_counter_value(systimer_hal.dev, system_timer_counter); + uint32_t alarm_id = 1 ; + systimer_hal_connect_alarm_counter(&systimer_hal, alarm_id, system_timer_counter); + systimer_hal_set_alarm_period(&systimer_hal, alarm_id, 1000000UL / 1000); + systimer_hal_select_alarm_mode(&systimer_hal, alarm_id, SYSTIMER_ALARM_MODE_PERIOD); + systimer_hal_counter_can_stall_by_cpu(&systimer_hal, 1, 0, true); + systimer_hal_enable_alarm_int(&systimer_hal, alarm_id); + + systimer_hal_enable_counter(&systimer_hal, SYSTIMER_LL_COUNTER_OS_TICK); +} +void rt_hw_board_init(void) +{ + rt_hw_systick_init(); + + extern int __heap_start__; + extern int __heap_end__; + printf("%s:%d__heap_start__:%p,__heap_end__:%p\n",__func__,__LINE__,&__heap_start__,&__heap_end__); + rt_system_heap_init((void *)&__heap_start__, (void *)&__heap_end__); + +} + +static void rtthread_startup(void) +{ + rt_hw_interrupt_disable(); + /* init board */ + rt_hw_board_init(); + /* show RT-Thread version */ + rt_show_version(); + + /* timer system initialization */ + rt_system_timer_init(); + + /* scheduler system initialization */ + rt_system_scheduler_init(); + + /* create init_thread */ + rt_application_init(); + + /* timer thread initialization */ + rt_system_timer_thread_init(); + + /* idle thread initialization */ + rt_thread_idle_init(); + + /* start scheduler */ + rt_system_scheduler_start(); + /* init scheduler system */ + + /* never reach here */ + return ; +} + +void app_main(void) +{ + /* startup RT-Thread RTOS */ + rtthread_startup(); + return; + +} diff --git a/bsp/ESP32_C3/rtconfig.h b/bsp/ESP32_C3/rtconfig.h new file mode 100644 index 0000000000000000000000000000000000000000..d09d71a2418a8bfdecfc8e32c56a13a345adfadc --- /dev/null +++ b/bsp/ESP32_C3/rtconfig.h @@ -0,0 +1,151 @@ +#ifndef RT_CONFIG_H__ +#define RT_CONFIG_H__ + +/* Automatically generated file; DO NOT EDIT. */ +/* RT-Thread Configuration */ + +/* RT-Thread Kernel */ + +#define RT_NAME_MAX 8 +#define RT_ALIGN_SIZE 4 +#define RT_THREAD_PRIORITY_32 +#define RT_THREAD_PRIORITY_MAX 32 +#define RT_TICK_PER_SECOND 1000 +#define IDLE_THREAD_STACK_SIZE 256 + +/* kservice optimization */ + + +/* Inter-Thread communication */ + +#define RT_USING_SEMAPHORE + +/* Memory Management */ + +#define RT_USING_MEMPOOL +#define RT_USING_SMALL_MEM +#define RT_USING_SMALL_MEM_AS_HEAP +#define RT_USING_HEAP + +/* Kernel Device Object */ + +#define RT_VER_NUM 0x40004 + + +/* RT-Thread Components */ + +/* C++ features */ + + +/* Command shell */ + + +/* Device virtual file system */ + + +/* Device Drivers */ + + +/* Using USB */ + + +/* POSIX layer and C standard library */ + + +/* Network */ + +/* Socket abstraction layer */ + + +/* Network interface device */ + + +/* light weight TCP/IP stack */ + + +/* AT commands */ + + +/* VBUS(Virtual Software BUS) */ + + +/* Utilities */ + + +/* RT-Thread Utestcases */ + + +/* RT-Thread online packages */ + +/* IoT - internet of things */ + + +/* Wi-Fi */ + +/* Marvell WiFi */ + + +/* Wiced WiFi */ + + +/* IoT Cloud */ + + +/* security packages */ + + +/* language packages */ + +/* JSON: JavaScript Object Notation, a lightweight data-interchange format */ + + +/* XML: Extensible Markup Language */ + + +/* multimedia packages */ + +/* LVGL: powerful and easy-to-use embedded GUI library */ + + +/* u8g2: a monochrome graphic library */ + + +/* PainterEngine: A cross-platform graphics application framework written in C language */ + + +/* tools packages */ + + +/* system packages */ + +/* enhanced kernel services */ + + +/* POSIX extension functions */ + + +/* acceleration: Assembly language or algorithmic acceleration packages */ + + +/* CMSIS: ARM Cortex-M Microcontroller Software Interface Standard */ + + +/* Micrium: Micrium software products porting for RT-Thread */ + + +/* peripheral libraries and drivers */ + + +/* AI packages */ + + +/* miscellaneous packages */ + +/* project laboratory */ + +/* samples: kernel and components samples */ + + +/* entertainment: terminal games and other interesting software packages */ + +#endif diff --git a/bsp/ESP32_C3/sdkconfig b/bsp/ESP32_C3/sdkconfig new file mode 100644 index 0000000000000000000000000000000000000000..6fceeb0e6d5e3643a13477d000634291c87b55aa --- /dev/null +++ b/bsp/ESP32_C3/sdkconfig @@ -0,0 +1,1297 @@ +# +# Automatically generated file. DO NOT EDIT. +# Espressif IoT Development Framework (ESP-IDF) Project Configuration +# +CONFIG_IDF_CMAKE=y +CONFIG_IDF_TARGET_ARCH_RISCV=y +CONFIG_IDF_TARGET="esp32c3" +CONFIG_IDF_TARGET_ESP32C3=y +CONFIG_IDF_FIRMWARE_CHIP_ID=0x0005 + +# +# SDK tool configuration +# +CONFIG_SDK_TOOLPREFIX="riscv32-esp-elf-" +# CONFIG_SDK_TOOLCHAIN_SUPPORTS_TIME_WIDE_64_BITS is not set +# end of SDK tool configuration + +# +# Build type +# +CONFIG_APP_BUILD_TYPE_APP_2NDBOOT=y +# CONFIG_APP_BUILD_TYPE_ELF_RAM is not set +CONFIG_APP_BUILD_GENERATE_BINARIES=y +CONFIG_APP_BUILD_BOOTLOADER=y +CONFIG_APP_BUILD_USE_FLASH_SECTIONS=y +# end of Build type + +# +# Application manager +# +CONFIG_APP_COMPILE_TIME_DATE=y +# CONFIG_APP_EXCLUDE_PROJECT_VER_VAR is not set +# CONFIG_APP_EXCLUDE_PROJECT_NAME_VAR is not set +# CONFIG_APP_PROJECT_VER_FROM_CONFIG is not set +CONFIG_APP_RETRIEVE_LEN_ELF_SHA=16 +# end of Application manager + +# +# Bootloader config +# +CONFIG_BOOTLOADER_OFFSET_IN_FLASH=0x0 +CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_SIZE=y +# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_DEBUG is not set +# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_PERF is not set +# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_NONE is not set +# CONFIG_BOOTLOADER_LOG_LEVEL_NONE is not set +# CONFIG_BOOTLOADER_LOG_LEVEL_ERROR is not set +# CONFIG_BOOTLOADER_LOG_LEVEL_WARN is not set +CONFIG_BOOTLOADER_LOG_LEVEL_INFO=y +# CONFIG_BOOTLOADER_LOG_LEVEL_DEBUG is not set +# CONFIG_BOOTLOADER_LOG_LEVEL_VERBOSE is not set +CONFIG_BOOTLOADER_LOG_LEVEL=3 +CONFIG_BOOTLOADER_VDDSDIO_BOOST_1_9V=y +# CONFIG_BOOTLOADER_FACTORY_RESET is not set +# CONFIG_BOOTLOADER_APP_TEST is not set +CONFIG_BOOTLOADER_WDT_ENABLE=y +# CONFIG_BOOTLOADER_WDT_DISABLE_IN_USER_CODE is not set +CONFIG_BOOTLOADER_WDT_TIME_MS=9000 +# CONFIG_BOOTLOADER_APP_ROLLBACK_ENABLE is not set +# CONFIG_BOOTLOADER_SKIP_VALIDATE_IN_DEEP_SLEEP is not set +# CONFIG_BOOTLOADER_SKIP_VALIDATE_ON_POWER_ON is not set +# CONFIG_BOOTLOADER_SKIP_VALIDATE_ALWAYS is not set +CONFIG_BOOTLOADER_RESERVE_RTC_SIZE=0 +# CONFIG_BOOTLOADER_CUSTOM_RESERVE_RTC is not set +CONFIG_BOOTLOADER_FLASH_XMC_SUPPORT=y +# end of Bootloader config + +# +# Security features +# +CONFIG_SECURE_BOOT_SUPPORTS_RSA=y +CONFIG_SECURE_TARGET_HAS_SECURE_ROM_DL_MODE=y +# CONFIG_SECURE_SIGNED_APPS_NO_SECURE_BOOT is not set +# CONFIG_SECURE_BOOT is not set +# CONFIG_SECURE_FLASH_ENC_ENABLED is not set +# end of Security features + +# +# Boot ROM Behavior +# +CONFIG_BOOT_ROM_LOG_ALWAYS_ON=y +# CONFIG_BOOT_ROM_LOG_ALWAYS_OFF is not set +# CONFIG_BOOT_ROM_LOG_ON_GPIO_HIGH is not set +# CONFIG_BOOT_ROM_LOG_ON_GPIO_LOW is not set +# end of Boot ROM Behavior + +# +# Serial flasher config +# +CONFIG_ESPTOOLPY_BAUD_OTHER_VAL=115200 +# CONFIG_ESPTOOLPY_NO_STUB is not set +# CONFIG_ESPTOOLPY_FLASHMODE_QIO is not set +# CONFIG_ESPTOOLPY_FLASHMODE_QOUT is not set +CONFIG_ESPTOOLPY_FLASHMODE_DIO=y +# CONFIG_ESPTOOLPY_FLASHMODE_DOUT is not set +CONFIG_ESPTOOLPY_FLASH_SAMPLE_MODE_STR=y +CONFIG_ESPTOOLPY_FLASHMODE="dio" +CONFIG_ESPTOOLPY_FLASHFREQ_80M=y +# CONFIG_ESPTOOLPY_FLASHFREQ_40M is not set +# CONFIG_ESPTOOLPY_FLASHFREQ_26M is not set +# CONFIG_ESPTOOLPY_FLASHFREQ_20M is not set +CONFIG_ESPTOOLPY_FLASHFREQ="80m" +# CONFIG_ESPTOOLPY_FLASHSIZE_1MB is not set +CONFIG_ESPTOOLPY_FLASHSIZE_2MB=y +# CONFIG_ESPTOOLPY_FLASHSIZE_4MB is not set +# CONFIG_ESPTOOLPY_FLASHSIZE_8MB is not set +# CONFIG_ESPTOOLPY_FLASHSIZE_16MB is not set +CONFIG_ESPTOOLPY_FLASHSIZE="2MB" +CONFIG_ESPTOOLPY_FLASHSIZE_DETECT=y +CONFIG_ESPTOOLPY_BEFORE_RESET=y +# CONFIG_ESPTOOLPY_BEFORE_NORESET is not set +CONFIG_ESPTOOLPY_BEFORE="default_reset" +CONFIG_ESPTOOLPY_AFTER_RESET=y +# CONFIG_ESPTOOLPY_AFTER_NORESET is not set +CONFIG_ESPTOOLPY_AFTER="hard_reset" +# CONFIG_ESPTOOLPY_MONITOR_BAUD_CONSOLE is not set +# CONFIG_ESPTOOLPY_MONITOR_BAUD_9600B is not set +# CONFIG_ESPTOOLPY_MONITOR_BAUD_57600B is not set +CONFIG_ESPTOOLPY_MONITOR_BAUD_115200B=y +# CONFIG_ESPTOOLPY_MONITOR_BAUD_230400B is not set +# CONFIG_ESPTOOLPY_MONITOR_BAUD_921600B is not set +# CONFIG_ESPTOOLPY_MONITOR_BAUD_2MB is not set +# CONFIG_ESPTOOLPY_MONITOR_BAUD_OTHER is not set +CONFIG_ESPTOOLPY_MONITOR_BAUD_OTHER_VAL=115200 +CONFIG_ESPTOOLPY_MONITOR_BAUD=115200 +# end of Serial flasher config + +# +# Partition Table +# +CONFIG_PARTITION_TABLE_SINGLE_APP=y +# CONFIG_PARTITION_TABLE_SINGLE_APP_LARGE is not set +# CONFIG_PARTITION_TABLE_TWO_OTA is not set +# CONFIG_PARTITION_TABLE_CUSTOM is not set +CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions.csv" +CONFIG_PARTITION_TABLE_FILENAME="partitions_singleapp.csv" +CONFIG_PARTITION_TABLE_OFFSET=0x8000 +CONFIG_PARTITION_TABLE_MD5=y +# end of Partition Table + +# +# Compiler options +# +CONFIG_COMPILER_OPTIMIZATION_DEFAULT=y +# CONFIG_COMPILER_OPTIMIZATION_SIZE is not set +# CONFIG_COMPILER_OPTIMIZATION_PERF is not set +# CONFIG_COMPILER_OPTIMIZATION_NONE is not set +CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_ENABLE=y +# CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_SILENT is not set +# CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_DISABLE is not set +CONFIG_COMPILER_OPTIMIZATION_ASSERTION_LEVEL=2 +# CONFIG_COMPILER_OPTIMIZATION_CHECKS_SILENT is not set +CONFIG_COMPILER_HIDE_PATHS_MACROS=y +# CONFIG_COMPILER_CXX_EXCEPTIONS is not set +# CONFIG_COMPILER_CXX_RTTI is not set +CONFIG_COMPILER_STACK_CHECK_MODE_NONE=y +# CONFIG_COMPILER_STACK_CHECK_MODE_NORM is not set +# CONFIG_COMPILER_STACK_CHECK_MODE_STRONG is not set +# CONFIG_COMPILER_STACK_CHECK_MODE_ALL is not set +# CONFIG_COMPILER_WARN_WRITE_STRINGS is not set +# CONFIG_COMPILER_SAVE_RESTORE_LIBCALLS is not set +# CONFIG_COMPILER_DISABLE_GCC8_WARNINGS is not set +# CONFIG_COMPILER_DUMP_RTL_FILES is not set +# end of Compiler options + +# +# Component config +# + +# +# Application Level Tracing +# +# CONFIG_APPTRACE_DEST_JTAG is not set +CONFIG_APPTRACE_DEST_NONE=y +CONFIG_APPTRACE_LOCK_ENABLE=y +# end of Application Level Tracing + +# +# ESP-ASIO +# +# CONFIG_ASIO_SSL_SUPPORT is not set +# end of ESP-ASIO + +# +# Bluetooth +# +# CONFIG_BT_ENABLED is not set +# end of Bluetooth + +# +# CoAP Configuration +# +CONFIG_COAP_MBEDTLS_PSK=y +# CONFIG_COAP_MBEDTLS_PKI is not set +# CONFIG_COAP_MBEDTLS_DEBUG is not set +CONFIG_COAP_LOG_DEFAULT_LEVEL=0 +# end of CoAP Configuration + +# +# Driver configurations +# + +# +# ADC configuration +# +# CONFIG_ADC_FORCE_XPD_FSM is not set +CONFIG_ADC_DISABLE_DAC=y +# end of ADC configuration + +# +# MCPWM configuration +# +# CONFIG_MCPWM_ISR_IN_IRAM is not set +# end of MCPWM configuration + +# +# SPI configuration +# +# CONFIG_SPI_MASTER_IN_IRAM is not set +CONFIG_SPI_MASTER_ISR_IN_IRAM=y +# CONFIG_SPI_SLAVE_IN_IRAM is not set +CONFIG_SPI_SLAVE_ISR_IN_IRAM=y +# end of SPI configuration + +# +# TWAI configuration +# +# CONFIG_TWAI_ISR_IN_IRAM is not set +# end of TWAI configuration + +# +# UART configuration +# +# CONFIG_UART_ISR_IN_IRAM is not set +# end of UART configuration + +# +# GDMA Configuration +# +# CONFIG_GDMA_CTRL_FUNC_IN_IRAM is not set +# CONFIG_GDMA_ISR_IRAM_SAFE is not set +# end of GDMA Configuration +# end of Driver configurations + +# +# eFuse Bit Manager +# +# CONFIG_EFUSE_CUSTOM_TABLE is not set +# CONFIG_EFUSE_VIRTUAL is not set +CONFIG_EFUSE_MAX_BLK_LEN=256 +# end of eFuse Bit Manager + +# +# ESP-TLS +# +CONFIG_ESP_TLS_USING_MBEDTLS=y +CONFIG_ESP_TLS_USE_DS_PERIPHERAL=y +# CONFIG_ESP_TLS_SERVER is not set +# CONFIG_ESP_TLS_CLIENT_SESSION_TICKETS is not set +# CONFIG_ESP_TLS_PSK_VERIFICATION is not set +# CONFIG_ESP_TLS_INSECURE is not set +# end of ESP-TLS + +# +# ESP32C3-Specific +# +# CONFIG_ESP32C3_DEFAULT_CPU_FREQ_80 is not set +CONFIG_ESP32C3_DEFAULT_CPU_FREQ_160=y +CONFIG_ESP32C3_DEFAULT_CPU_FREQ_MHZ=160 +# CONFIG_ESP32C3_REV_MIN_0 is not set +# CONFIG_ESP32C3_REV_MIN_1 is not set +# CONFIG_ESP32C3_REV_MIN_2 is not set +CONFIG_ESP32C3_REV_MIN_3=y +CONFIG_ESP32C3_REV_MIN=3 +CONFIG_ESP32C3_DEBUG_OCDAWARE=y +# CONFIG_ESP32C3_DEBUG_STUBS_ENABLE is not set +CONFIG_ESP32C3_BROWNOUT_DET=y +CONFIG_ESP32C3_BROWNOUT_DET_LVL_SEL_7=y +# CONFIG_ESP32C3_BROWNOUT_DET_LVL_SEL_6 is not set +# CONFIG_ESP32C3_BROWNOUT_DET_LVL_SEL_5 is not set +# CONFIG_ESP32C3_BROWNOUT_DET_LVL_SEL_4 is not set +# CONFIG_ESP32C3_BROWNOUT_DET_LVL_SEL_3 is not set +# CONFIG_ESP32C3_BROWNOUT_DET_LVL_SEL_2 is not set +CONFIG_ESP32C3_BROWNOUT_DET_LVL=7 +CONFIG_ESP32C3_TIME_SYSCALL_USE_RTC_SYSTIMER=y +# CONFIG_ESP32C3_TIME_SYSCALL_USE_RTC is not set +# CONFIG_ESP32C3_TIME_SYSCALL_USE_SYSTIMER is not set +# CONFIG_ESP32C3_TIME_SYSCALL_USE_NONE is not set +CONFIG_ESP32C3_RTC_CLK_SRC_INT_RC=y +# CONFIG_ESP32C3_RTC_CLK_SRC_EXT_CRYS is not set +# CONFIG_ESP32C3_RTC_CLK_SRC_EXT_OSC is not set +# CONFIG_ESP32C3_RTC_CLK_SRC_INT_8MD256 is not set +CONFIG_ESP32C3_RTC_CLK_CAL_CYCLES=1024 +# CONFIG_ESP32C3_NO_BLOBS is not set +# end of ESP32C3-Specific + +# +# ADC-Calibration +# +# end of ADC-Calibration + +# +# Common ESP-related +# +CONFIG_ESP_ERR_TO_NAME_LOOKUP=y +# end of Common ESP-related + +# +# Ethernet +# +CONFIG_ETH_ENABLED=y +CONFIG_ETH_USE_SPI_ETHERNET=y +# CONFIG_ETH_SPI_ETHERNET_DM9051 is not set +# CONFIG_ETH_SPI_ETHERNET_W5500 is not set +# CONFIG_ETH_SPI_ETHERNET_KSZ8851SNL is not set +# CONFIG_ETH_USE_OPENETH is not set +# end of Ethernet + +# +# Event Loop Library +# +# CONFIG_ESP_EVENT_LOOP_PROFILING is not set +CONFIG_ESP_EVENT_POST_FROM_ISR=y +CONFIG_ESP_EVENT_POST_FROM_IRAM_ISR=y +# end of Event Loop Library + +# +# GDB Stub +# +# end of GDB Stub + +# +# ESP HTTP client +# +CONFIG_ESP_HTTP_CLIENT_ENABLE_HTTPS=y +# CONFIG_ESP_HTTP_CLIENT_ENABLE_BASIC_AUTH is not set +CONFIG_ESP_HTTP_CLIENT_ENABLE_DIGEST_AUTH=y +# end of ESP HTTP client + +# +# HTTP Server +# +CONFIG_HTTPD_MAX_REQ_HDR_LEN=512 +CONFIG_HTTPD_MAX_URI_LEN=512 +CONFIG_HTTPD_ERR_RESP_NO_DELAY=y +CONFIG_HTTPD_PURGE_BUF_LEN=32 +# CONFIG_HTTPD_LOG_PURGE_DATA is not set +# CONFIG_HTTPD_WS_SUPPORT is not set +# end of HTTP Server + +# +# ESP HTTPS OTA +# +# CONFIG_OTA_ALLOW_HTTP is not set +# end of ESP HTTPS OTA + +# +# ESP HTTPS server +# +# CONFIG_ESP_HTTPS_SERVER_ENABLE is not set +# end of ESP HTTPS server + +# +# Hardware Settings +# + +# +# MAC Config +# +CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_STA=y +CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_AP=y +CONFIG_ESP_MAC_ADDR_UNIVERSE_BT=y +CONFIG_ESP_MAC_ADDR_UNIVERSE_ETH=y +# CONFIG_ESP32C3_UNIVERSAL_MAC_ADDRESSES_TWO is not set +CONFIG_ESP32C3_UNIVERSAL_MAC_ADDRESSES_FOUR=y +CONFIG_ESP32C3_UNIVERSAL_MAC_ADDRESSES=4 +# end of MAC Config + +# +# Sleep Config +# +CONFIG_ESP_SLEEP_POWER_DOWN_FLASH=y +CONFIG_ESP_SLEEP_GPIO_RESET_WORKAROUND=y +# CONFIG_ESP_SLEEP_FLASH_LEAKAGE_WORKAROUND is not set +# end of Sleep Config +# end of Hardware Settings + +# +# IPC (Inter-Processor Call) +# +CONFIG_ESP_IPC_TASK_STACK_SIZE=1536 +# end of IPC (Inter-Processor Call) + +# +# LCD and Touch Panel +# + +# +# LCD Peripheral Configuration +# +CONFIG_LCD_PANEL_IO_FORMAT_BUF_SIZE=32 +# end of LCD Peripheral Configuration +# end of LCD and Touch Panel + +# +# ESP NETIF Adapter +# +CONFIG_ESP_NETIF_IP_LOST_TIMER_INTERVAL=120 +CONFIG_ESP_NETIF_TCPIP_LWIP=y +# CONFIG_ESP_NETIF_LOOPBACK is not set +CONFIG_ESP_NETIF_TCPIP_ADAPTER_COMPATIBLE_LAYER=y +# end of ESP NETIF Adapter + +# +# PHY +# +CONFIG_ESP_PHY_CALIBRATION_AND_DATA_STORAGE=y +# CONFIG_ESP_PHY_INIT_DATA_IN_PARTITION is not set +CONFIG_ESP_PHY_MAX_WIFI_TX_POWER=20 +CONFIG_ESP_PHY_MAX_TX_POWER=20 +# end of PHY + +# +# Power Management +# +# CONFIG_PM_ENABLE is not set +CONFIG_PM_POWER_DOWN_CPU_IN_LIGHT_SLEEP=y +# end of Power Management + +# +# ESP System Settings +# +# CONFIG_ESP_SYSTEM_PANIC_PRINT_HALT is not set +CONFIG_ESP_SYSTEM_PANIC_PRINT_REBOOT=y +# CONFIG_ESP_SYSTEM_PANIC_SILENT_REBOOT is not set +# CONFIG_ESP_SYSTEM_PANIC_GDBSTUB is not set +# CONFIG_ESP_SYSTEM_GDBSTUB_RUNTIME is not set +CONFIG_ESP_SYSTEM_SINGLE_CORE_MODE=y +CONFIG_ESP_SYSTEM_RTC_FAST_MEM_AS_HEAP_DEPCHECK=y +CONFIG_ESP_SYSTEM_ALLOW_RTC_FAST_MEM_AS_HEAP=y +# CONFIG_ESP_SYSTEM_USE_EH_FRAME is not set + +# +# Memory protection +# +CONFIG_ESP_SYSTEM_MEMPROT_DEPCHECK=y +CONFIG_ESP_SYSTEM_MEMPROT_FEATURE=y +CONFIG_ESP_SYSTEM_MEMPROT_FEATURE_LOCK=y +CONFIG_ESP_SYSTEM_MEMPROT_CPU_PREFETCH_PAD_SIZE=16 +CONFIG_ESP_SYSTEM_MEMPROT_MEM_ALIGN_SIZE=512 +# end of Memory protection + +CONFIG_ESP_SYSTEM_EVENT_QUEUE_SIZE=32 +CONFIG_ESP_SYSTEM_EVENT_TASK_STACK_SIZE=2304 +CONFIG_ESP_MAIN_TASK_STACK_SIZE=3584 +CONFIG_ESP_MAIN_TASK_AFFINITY_CPU0=y +# CONFIG_ESP_MAIN_TASK_AFFINITY_NO_AFFINITY is not set +CONFIG_ESP_MAIN_TASK_AFFINITY=0x0 +CONFIG_ESP_MINIMAL_SHARED_STACK_SIZE=2048 +CONFIG_ESP_CONSOLE_UART_DEFAULT=y +# CONFIG_ESP_CONSOLE_USB_SERIAL_JTAG is not set +# CONFIG_ESP_CONSOLE_UART_CUSTOM is not set +# CONFIG_ESP_CONSOLE_NONE is not set +# CONFIG_ESP_CONSOLE_SECONDARY_NONE is not set +CONFIG_ESP_CONSOLE_SECONDARY_USB_SERIAL_JTAG=y +CONFIG_ESP_CONSOLE_UART=y +CONFIG_ESP_CONSOLE_UART_NUM=0 +CONFIG_ESP_CONSOLE_UART_BAUDRATE=115200 +# CONFIG_ESP_INT_WDT is not set +# CONFIG_ESP_TASK_WDT is not set +# CONFIG_ESP_PANIC_HANDLER_IRAM is not set +CONFIG_ESP_SYSTEM_CHECK_INT_LEVEL_4=y +# end of ESP System Settings + +# +# High resolution timer (esp_timer) +# +# CONFIG_ESP_TIMER_PROFILING is not set +CONFIG_ESP_TIME_FUNCS_USE_RTC_TIMER=y +CONFIG_ESP_TIME_FUNCS_USE_ESP_TIMER=y +CONFIG_ESP_TIMER_TASK_STACK_SIZE=3584 +CONFIG_ESP_TIMER_INTERRUPT_LEVEL=1 +# CONFIG_ESP_TIMER_SUPPORTS_ISR_DISPATCH_METHOD is not set +CONFIG_ESP_TIMER_IMPL_SYSTIMER=y +# end of High resolution timer (esp_timer) + +# +# Wi-Fi +# +CONFIG_ESP32_WIFI_ENABLED=y +CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM=10 +CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM=32 +# CONFIG_ESP32_WIFI_STATIC_TX_BUFFER is not set +CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER=y +CONFIG_ESP32_WIFI_TX_BUFFER_TYPE=1 +CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER_NUM=32 +# CONFIG_ESP32_WIFI_CSI_ENABLED is not set +CONFIG_ESP32_WIFI_AMPDU_TX_ENABLED=y +CONFIG_ESP32_WIFI_TX_BA_WIN=6 +CONFIG_ESP32_WIFI_AMPDU_RX_ENABLED=y +CONFIG_ESP32_WIFI_RX_BA_WIN=6 +CONFIG_ESP32_WIFI_NVS_ENABLED=y +CONFIG_ESP32_WIFI_SOFTAP_BEACON_MAX_LEN=752 +CONFIG_ESP32_WIFI_MGMT_SBUF_NUM=32 +CONFIG_ESP32_WIFI_IRAM_OPT=y +CONFIG_ESP32_WIFI_RX_IRAM_OPT=y +CONFIG_ESP32_WIFI_ENABLE_WPA3_SAE=y +# CONFIG_ESP_WIFI_SLP_IRAM_OPT is not set +# CONFIG_ESP_WIFI_FTM_ENABLE is not set +# CONFIG_ESP_WIFI_STA_DISCONNECTED_PM_ENABLE is not set +# CONFIG_ESP_WIFI_EXTERNAL_COEXIST_ENABLE is not set +# CONFIG_ESP_WIFI_GCMP_SUPPORT is not set +# CONFIG_ESP_WIFI_GMAC_SUPPORT is not set +CONFIG_ESP_WIFI_SOFTAP_SUPPORT=y +# end of Wi-Fi + +# +# Core dump +# +# CONFIG_ESP_COREDUMP_ENABLE_TO_FLASH is not set +# CONFIG_ESP_COREDUMP_ENABLE_TO_UART is not set +CONFIG_ESP_COREDUMP_ENABLE_TO_NONE=y +# end of Core dump + +# +# FAT Filesystem support +# +# CONFIG_FATFS_CODEPAGE_DYNAMIC is not set +CONFIG_FATFS_CODEPAGE_437=y +# CONFIG_FATFS_CODEPAGE_720 is not set +# CONFIG_FATFS_CODEPAGE_737 is not set +# CONFIG_FATFS_CODEPAGE_771 is not set +# CONFIG_FATFS_CODEPAGE_775 is not set +# CONFIG_FATFS_CODEPAGE_850 is not set +# CONFIG_FATFS_CODEPAGE_852 is not set +# CONFIG_FATFS_CODEPAGE_855 is not set +# CONFIG_FATFS_CODEPAGE_857 is not set +# CONFIG_FATFS_CODEPAGE_860 is not set +# CONFIG_FATFS_CODEPAGE_861 is not set +# CONFIG_FATFS_CODEPAGE_862 is not set +# CONFIG_FATFS_CODEPAGE_863 is not set +# CONFIG_FATFS_CODEPAGE_864 is not set +# CONFIG_FATFS_CODEPAGE_865 is not set +# CONFIG_FATFS_CODEPAGE_866 is not set +# CONFIG_FATFS_CODEPAGE_869 is not set +# CONFIG_FATFS_CODEPAGE_932 is not set +# CONFIG_FATFS_CODEPAGE_936 is not set +# CONFIG_FATFS_CODEPAGE_949 is not set +# CONFIG_FATFS_CODEPAGE_950 is not set +CONFIG_FATFS_CODEPAGE=437 +CONFIG_FATFS_LFN_NONE=y +# CONFIG_FATFS_LFN_HEAP is not set +# CONFIG_FATFS_LFN_STACK is not set +CONFIG_FATFS_FS_LOCK=0 +CONFIG_FATFS_TIMEOUT_MS=10000 +CONFIG_FATFS_PER_FILE_CACHE=y +# CONFIG_FATFS_USE_FASTSEEK is not set +# end of FAT Filesystem support + +# +# Modbus configuration +# +CONFIG_FMB_COMM_MODE_TCP_EN=y +CONFIG_FMB_TCP_PORT_DEFAULT=502 +CONFIG_FMB_TCP_PORT_MAX_CONN=5 +CONFIG_FMB_TCP_CONNECTION_TOUT_SEC=20 +CONFIG_FMB_COMM_MODE_RTU_EN=y +CONFIG_FMB_COMM_MODE_ASCII_EN=y +CONFIG_FMB_MASTER_TIMEOUT_MS_RESPOND=150 +CONFIG_FMB_MASTER_DELAY_MS_CONVERT=200 +CONFIG_FMB_QUEUE_LENGTH=20 +CONFIG_FMB_PORT_TASK_STACK_SIZE=4096 +CONFIG_FMB_SERIAL_BUF_SIZE=256 +CONFIG_FMB_SERIAL_ASCII_BITS_PER_SYMB=8 +CONFIG_FMB_SERIAL_ASCII_TIMEOUT_RESPOND_MS=1000 +CONFIG_FMB_PORT_TASK_PRIO=10 +CONFIG_FMB_PORT_TASK_AFFINITY=0x7FFFFFFF +CONFIG_FMB_CONTROLLER_SLAVE_ID_SUPPORT=y +CONFIG_FMB_CONTROLLER_SLAVE_ID=0x00112233 +CONFIG_FMB_CONTROLLER_NOTIFY_TIMEOUT=20 +CONFIG_FMB_CONTROLLER_NOTIFY_QUEUE_SIZE=20 +CONFIG_FMB_CONTROLLER_STACK_SIZE=4096 +CONFIG_FMB_EVENT_QUEUE_TIMEOUT=20 +# CONFIG_FMB_TIMER_PORT_ENABLED is not set +CONFIG_FMB_TIMER_GROUP=0 +CONFIG_FMB_TIMER_INDEX=0 +CONFIG_FMB_MASTER_TIMER_GROUP=0 +CONFIG_FMB_MASTER_TIMER_INDEX=0 +# CONFIG_FMB_TIMER_ISR_IN_IRAM is not set +# end of Modbus configuration + +# +# FreeRTOS +# +CONFIG_FREERTOS_UNICORE=y +CONFIG_FREERTOS_NO_AFFINITY=0x7FFFFFFF +CONFIG_FREERTOS_TICK_SUPPORT_SYSTIMER=y +CONFIG_FREERTOS_CORETIMER_SYSTIMER_LVL1=y +# CONFIG_FREERTOS_CORETIMER_SYSTIMER_LVL3 is not set +CONFIG_FREERTOS_SYSTICK_USES_SYSTIMER=y +CONFIG_FREERTOS_OPTIMIZED_SCHEDULER=y +CONFIG_FREERTOS_HZ=100 +CONFIG_FREERTOS_ASSERT_ON_UNTESTED_FUNCTION=y +# CONFIG_FREERTOS_CHECK_STACKOVERFLOW_NONE is not set +# CONFIG_FREERTOS_CHECK_STACKOVERFLOW_PTRVAL is not set +CONFIG_FREERTOS_CHECK_STACKOVERFLOW_CANARY=y +# CONFIG_FREERTOS_WATCHPOINT_END_OF_STACK is not set +CONFIG_FREERTOS_INTERRUPT_BACKTRACE=y +CONFIG_FREERTOS_THREAD_LOCAL_STORAGE_POINTERS=1 +CONFIG_FREERTOS_ASSERT_FAIL_ABORT=y +# CONFIG_FREERTOS_ASSERT_FAIL_PRINT_CONTINUE is not set +# CONFIG_FREERTOS_ASSERT_DISABLE is not set +CONFIG_FREERTOS_IDLE_TASK_STACKSIZE=1536 +CONFIG_FREERTOS_ISR_STACKSIZE=1536 +# CONFIG_FREERTOS_LEGACY_HOOKS is not set +CONFIG_FREERTOS_MAX_TASK_NAME_LEN=16 +CONFIG_FREERTOS_SUPPORT_STATIC_ALLOCATION=y +# CONFIG_FREERTOS_ENABLE_STATIC_TASK_CLEAN_UP is not set +CONFIG_FREERTOS_TIMER_TASK_PRIORITY=1 +CONFIG_FREERTOS_TIMER_TASK_STACK_DEPTH=2048 +CONFIG_FREERTOS_TIMER_QUEUE_LENGTH=10 +CONFIG_FREERTOS_QUEUE_REGISTRY_SIZE=0 +# CONFIG_FREERTOS_USE_TRACE_FACILITY is not set +# CONFIG_FREERTOS_GENERATE_RUN_TIME_STATS is not set +CONFIG_FREERTOS_TASK_FUNCTION_WRAPPER=y +CONFIG_FREERTOS_CHECK_MUTEX_GIVEN_BY_OWNER=y +# CONFIG_FREERTOS_CHECK_PORT_CRITICAL_COMPLIANCE is not set +# CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH is not set +CONFIG_FREERTOS_DEBUG_OCDAWARE=y +CONFIG_FREERTOS_ENABLE_TASK_SNAPSHOT=y +# CONFIG_FREERTOS_PLACE_SNAPSHOT_FUNS_INTO_FLASH is not set +# end of FreeRTOS + +# +# Hardware Abstraction Layer (HAL) and Low Level (LL) +# +CONFIG_HAL_ASSERTION_EQUALS_SYSTEM=y +# CONFIG_HAL_ASSERTION_DISABLE is not set +# CONFIG_HAL_ASSERTION_SILIENT is not set +# CONFIG_HAL_ASSERTION_ENABLE is not set +CONFIG_HAL_DEFAULT_ASSERTION_LEVEL=2 +# end of Hardware Abstraction Layer (HAL) and Low Level (LL) + +# +# Heap memory debugging +# +CONFIG_HEAP_POISONING_DISABLED=y +# CONFIG_HEAP_POISONING_LIGHT is not set +# CONFIG_HEAP_POISONING_COMPREHENSIVE is not set +CONFIG_HEAP_TRACING_OFF=y +# CONFIG_HEAP_TRACING_STANDALONE is not set +# CONFIG_HEAP_TRACING_TOHOST is not set +# CONFIG_HEAP_ABORT_WHEN_ALLOCATION_FAILS is not set +# end of Heap memory debugging + +# +# jsmn +# +# CONFIG_JSMN_PARENT_LINKS is not set +# CONFIG_JSMN_STRICT is not set +# end of jsmn + +# +# libsodium +# +# end of libsodium + +# +# Log output +# +# CONFIG_LOG_DEFAULT_LEVEL_NONE is not set +# CONFIG_LOG_DEFAULT_LEVEL_ERROR is not set +# CONFIG_LOG_DEFAULT_LEVEL_WARN is not set +CONFIG_LOG_DEFAULT_LEVEL_INFO=y +# CONFIG_LOG_DEFAULT_LEVEL_DEBUG is not set +# CONFIG_LOG_DEFAULT_LEVEL_VERBOSE is not set +CONFIG_LOG_DEFAULT_LEVEL=3 +CONFIG_LOG_MAXIMUM_EQUALS_DEFAULT=y +# CONFIG_LOG_MAXIMUM_LEVEL_DEBUG is not set +# CONFIG_LOG_MAXIMUM_LEVEL_VERBOSE is not set +CONFIG_LOG_MAXIMUM_LEVEL=3 +CONFIG_LOG_COLORS=y +CONFIG_LOG_TIMESTAMP_SOURCE_RTOS=y +# CONFIG_LOG_TIMESTAMP_SOURCE_SYSTEM is not set +# end of Log output + +# +# LWIP +# +CONFIG_LWIP_LOCAL_HOSTNAME="espressif" +# CONFIG_LWIP_NETIF_API is not set +# CONFIG_LWIP_TCPIP_CORE_LOCKING is not set +CONFIG_LWIP_DNS_SUPPORT_MDNS_QUERIES=y +# CONFIG_LWIP_L2_TO_L3_COPY is not set +# CONFIG_LWIP_IRAM_OPTIMIZATION is not set +CONFIG_LWIP_TIMERS_ONDEMAND=y +CONFIG_LWIP_MAX_SOCKETS=10 +# CONFIG_LWIP_USE_ONLY_LWIP_SELECT is not set +# CONFIG_LWIP_SO_LINGER is not set +CONFIG_LWIP_SO_REUSE=y +CONFIG_LWIP_SO_REUSE_RXTOALL=y +# CONFIG_LWIP_SO_RCVBUF is not set +# CONFIG_LWIP_NETBUF_RECVINFO is not set +CONFIG_LWIP_IP4_FRAG=y +CONFIG_LWIP_IP6_FRAG=y +# CONFIG_LWIP_IP4_REASSEMBLY is not set +# CONFIG_LWIP_IP6_REASSEMBLY is not set +# CONFIG_LWIP_IP_FORWARD is not set +# CONFIG_LWIP_STATS is not set +# CONFIG_LWIP_ETHARP_TRUST_IP_MAC is not set +CONFIG_LWIP_ESP_GRATUITOUS_ARP=y +CONFIG_LWIP_GARP_TMR_INTERVAL=60 +CONFIG_LWIP_TCPIP_RECVMBOX_SIZE=32 +CONFIG_LWIP_DHCP_DOES_ARP_CHECK=y +# CONFIG_LWIP_DHCP_DISABLE_CLIENT_ID is not set +CONFIG_LWIP_DHCP_DISABLE_VENDOR_CLASS_ID=y +# CONFIG_LWIP_DHCP_RESTORE_LAST_IP is not set +CONFIG_LWIP_DHCP_OPTIONS_LEN=68 + +# +# DHCP server +# +CONFIG_LWIP_DHCPS=y +CONFIG_LWIP_DHCPS_LEASE_UNIT=60 +CONFIG_LWIP_DHCPS_MAX_STATION_NUM=8 +# end of DHCP server + +# CONFIG_LWIP_AUTOIP is not set +CONFIG_LWIP_IPV6=y +# CONFIG_LWIP_IPV6_AUTOCONFIG is not set +CONFIG_LWIP_IPV6_NUM_ADDRESSES=3 +# CONFIG_LWIP_IPV6_FORWARD is not set +# CONFIG_LWIP_NETIF_STATUS_CALLBACK is not set +CONFIG_LWIP_NETIF_LOOPBACK=y +CONFIG_LWIP_LOOPBACK_MAX_PBUFS=8 + +# +# TCP +# +CONFIG_LWIP_MAX_ACTIVE_TCP=16 +CONFIG_LWIP_MAX_LISTENING_TCP=16 +CONFIG_LWIP_TCP_HIGH_SPEED_RETRANSMISSION=y +CONFIG_LWIP_TCP_MAXRTX=12 +CONFIG_LWIP_TCP_SYNMAXRTX=12 +CONFIG_LWIP_TCP_MSS=1440 +CONFIG_LWIP_TCP_TMR_INTERVAL=250 +CONFIG_LWIP_TCP_MSL=60000 +CONFIG_LWIP_TCP_SND_BUF_DEFAULT=5744 +CONFIG_LWIP_TCP_WND_DEFAULT=5744 +CONFIG_LWIP_TCP_RECVMBOX_SIZE=6 +CONFIG_LWIP_TCP_QUEUE_OOSEQ=y +# CONFIG_LWIP_TCP_SACK_OUT is not set +# CONFIG_LWIP_TCP_KEEP_CONNECTION_WHEN_IP_CHANGES is not set +CONFIG_LWIP_TCP_OVERSIZE_MSS=y +# CONFIG_LWIP_TCP_OVERSIZE_QUARTER_MSS is not set +# CONFIG_LWIP_TCP_OVERSIZE_DISABLE is not set +CONFIG_LWIP_TCP_RTO_TIME=1500 +# end of TCP + +# +# UDP +# +CONFIG_LWIP_MAX_UDP_PCBS=16 +CONFIG_LWIP_UDP_RECVMBOX_SIZE=6 +# end of UDP + +# +# Checksums +# +# CONFIG_LWIP_CHECKSUM_CHECK_IP is not set +# CONFIG_LWIP_CHECKSUM_CHECK_UDP is not set +CONFIG_LWIP_CHECKSUM_CHECK_ICMP=y +# end of Checksums + +CONFIG_LWIP_TCPIP_TASK_STACK_SIZE=3072 +CONFIG_LWIP_TCPIP_TASK_AFFINITY_NO_AFFINITY=y +# CONFIG_LWIP_TCPIP_TASK_AFFINITY_CPU0 is not set +CONFIG_LWIP_TCPIP_TASK_AFFINITY=0x7FFFFFFF +# CONFIG_LWIP_PPP_SUPPORT is not set +CONFIG_LWIP_IPV6_MEMP_NUM_ND6_QUEUE=3 +CONFIG_LWIP_IPV6_ND6_NUM_NEIGHBORS=5 +# CONFIG_LWIP_SLIP_SUPPORT is not set + +# +# ICMP +# +CONFIG_LWIP_ICMP=y +# CONFIG_LWIP_MULTICAST_PING is not set +# CONFIG_LWIP_BROADCAST_PING is not set +# end of ICMP + +# +# LWIP RAW API +# +CONFIG_LWIP_MAX_RAW_PCBS=16 +# end of LWIP RAW API + +# +# SNTP +# +CONFIG_LWIP_SNTP_MAX_SERVERS=1 +# CONFIG_LWIP_DHCP_GET_NTP_SRV is not set +CONFIG_LWIP_SNTP_UPDATE_DELAY=3600000 +# end of SNTP + +CONFIG_LWIP_ESP_LWIP_ASSERT=y + +# +# Hooks +# +# CONFIG_LWIP_HOOK_TCP_ISN_NONE is not set +CONFIG_LWIP_HOOK_TCP_ISN_DEFAULT=y +# CONFIG_LWIP_HOOK_TCP_ISN_CUSTOM is not set +CONFIG_LWIP_HOOK_IP6_ROUTE_NONE=y +# CONFIG_LWIP_HOOK_IP6_ROUTE_DEFAULT is not set +# CONFIG_LWIP_HOOK_IP6_ROUTE_CUSTOM is not set +CONFIG_LWIP_HOOK_ND6_GET_GW_NONE=y +# CONFIG_LWIP_HOOK_ND6_GET_GW_DEFAULT is not set +# CONFIG_LWIP_HOOK_ND6_GET_GW_CUSTOM is not set +CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_NONE=y +# CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_DEFAULT is not set +# CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_CUSTOM is not set +# end of Hooks + +# CONFIG_LWIP_DEBUG is not set +# end of LWIP + +# +# mbedTLS +# +CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y +# CONFIG_MBEDTLS_DEFAULT_MEM_ALLOC is not set +# CONFIG_MBEDTLS_CUSTOM_MEM_ALLOC is not set +CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN=y +CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN=16384 +CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096 +# CONFIG_MBEDTLS_DYNAMIC_BUFFER is not set +# CONFIG_MBEDTLS_DEBUG is not set + +# +# Certificate Bundle +# +CONFIG_MBEDTLS_CERTIFICATE_BUNDLE=y +CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_FULL=y +# CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_CMN is not set +# CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_NONE is not set +# CONFIG_MBEDTLS_CUSTOM_CERTIFICATE_BUNDLE is not set +# end of Certificate Bundle + +# CONFIG_MBEDTLS_ECP_RESTARTABLE is not set +# CONFIG_MBEDTLS_CMAC_C is not set +CONFIG_MBEDTLS_HARDWARE_AES=y +CONFIG_MBEDTLS_AES_USE_INTERRUPT=y +CONFIG_MBEDTLS_HARDWARE_MPI=y +CONFIG_MBEDTLS_HARDWARE_SHA=y +CONFIG_MBEDTLS_ROM_MD5=y +# CONFIG_MBEDTLS_ATCA_HW_ECDSA_SIGN is not set +# CONFIG_MBEDTLS_ATCA_HW_ECDSA_VERIFY is not set +CONFIG_MBEDTLS_HAVE_TIME=y +# CONFIG_MBEDTLS_HAVE_TIME_DATE is not set +CONFIG_MBEDTLS_ECDSA_DETERMINISTIC=y +CONFIG_MBEDTLS_SHA512_C=y +CONFIG_MBEDTLS_TLS_SERVER_AND_CLIENT=y +# CONFIG_MBEDTLS_TLS_SERVER_ONLY is not set +# CONFIG_MBEDTLS_TLS_CLIENT_ONLY is not set +# CONFIG_MBEDTLS_TLS_DISABLED is not set +CONFIG_MBEDTLS_TLS_SERVER=y +CONFIG_MBEDTLS_TLS_CLIENT=y +CONFIG_MBEDTLS_TLS_ENABLED=y + +# +# TLS Key Exchange Methods +# +# CONFIG_MBEDTLS_PSK_MODES is not set +CONFIG_MBEDTLS_KEY_EXCHANGE_RSA=y +CONFIG_MBEDTLS_KEY_EXCHANGE_DHE_RSA=y +CONFIG_MBEDTLS_KEY_EXCHANGE_ELLIPTIC_CURVE=y +CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_RSA=y +CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA=y +CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA=y +CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_RSA=y +# end of TLS Key Exchange Methods + +CONFIG_MBEDTLS_SSL_RENEGOTIATION=y +# CONFIG_MBEDTLS_SSL_PROTO_SSL3 is not set +CONFIG_MBEDTLS_SSL_PROTO_TLS1=y +CONFIG_MBEDTLS_SSL_PROTO_TLS1_1=y +CONFIG_MBEDTLS_SSL_PROTO_TLS1_2=y +# CONFIG_MBEDTLS_SSL_PROTO_GMTSSL1_1 is not set +# CONFIG_MBEDTLS_SSL_PROTO_DTLS is not set +CONFIG_MBEDTLS_SSL_ALPN=y +CONFIG_MBEDTLS_CLIENT_SSL_SESSION_TICKETS=y +CONFIG_MBEDTLS_X509_CHECK_KEY_USAGE=y +CONFIG_MBEDTLS_X509_CHECK_EXTENDED_KEY_USAGE=y +CONFIG_MBEDTLS_SERVER_SSL_SESSION_TICKETS=y + +# +# Symmetric Ciphers +# +CONFIG_MBEDTLS_AES_C=y +# CONFIG_MBEDTLS_CAMELLIA_C is not set +# CONFIG_MBEDTLS_DES_C is not set +CONFIG_MBEDTLS_RC4_DISABLED=y +# CONFIG_MBEDTLS_RC4_ENABLED_NO_DEFAULT is not set +# CONFIG_MBEDTLS_RC4_ENABLED is not set +# CONFIG_MBEDTLS_BLOWFISH_C is not set +# CONFIG_MBEDTLS_XTEA_C is not set +CONFIG_MBEDTLS_CCM_C=y +CONFIG_MBEDTLS_GCM_C=y +# CONFIG_MBEDTLS_NIST_KW_C is not set +# end of Symmetric Ciphers + +# CONFIG_MBEDTLS_RIPEMD160_C is not set + +# +# Certificates +# +CONFIG_MBEDTLS_PEM_PARSE_C=y +CONFIG_MBEDTLS_PEM_WRITE_C=y +CONFIG_MBEDTLS_X509_CRL_PARSE_C=y +CONFIG_MBEDTLS_X509_CSR_PARSE_C=y +# end of Certificates + +CONFIG_MBEDTLS_ECP_C=y +CONFIG_MBEDTLS_ECDH_C=y +CONFIG_MBEDTLS_ECDSA_C=y +# CONFIG_MBEDTLS_ECJPAKE_C is not set +CONFIG_MBEDTLS_ECP_DP_SECP192R1_ENABLED=y +CONFIG_MBEDTLS_ECP_DP_SECP224R1_ENABLED=y +CONFIG_MBEDTLS_ECP_DP_SECP256R1_ENABLED=y +CONFIG_MBEDTLS_ECP_DP_SECP384R1_ENABLED=y +CONFIG_MBEDTLS_ECP_DP_SECP521R1_ENABLED=y +CONFIG_MBEDTLS_ECP_DP_SECP192K1_ENABLED=y +CONFIG_MBEDTLS_ECP_DP_SECP224K1_ENABLED=y +CONFIG_MBEDTLS_ECP_DP_SECP256K1_ENABLED=y +CONFIG_MBEDTLS_ECP_DP_BP256R1_ENABLED=y +CONFIG_MBEDTLS_ECP_DP_BP384R1_ENABLED=y +CONFIG_MBEDTLS_ECP_DP_BP512R1_ENABLED=y +CONFIG_MBEDTLS_ECP_DP_CURVE25519_ENABLED=y +CONFIG_MBEDTLS_ECP_NIST_OPTIM=y +# CONFIG_MBEDTLS_POLY1305_C is not set +# CONFIG_MBEDTLS_CHACHA20_C is not set +# CONFIG_MBEDTLS_HKDF_C is not set +# CONFIG_MBEDTLS_THREADING_C is not set +CONFIG_MBEDTLS_LARGE_KEY_SOFTWARE_MPI=y +# CONFIG_MBEDTLS_SECURITY_RISKS is not set +# end of mbedTLS + +# +# mDNS +# +CONFIG_MDNS_MAX_SERVICES=10 +CONFIG_MDNS_TASK_PRIORITY=1 +CONFIG_MDNS_TASK_STACK_SIZE=4096 +# CONFIG_MDNS_TASK_AFFINITY_NO_AFFINITY is not set +CONFIG_MDNS_TASK_AFFINITY_CPU0=y +CONFIG_MDNS_TASK_AFFINITY=0x0 +CONFIG_MDNS_SERVICE_ADD_TIMEOUT_MS=2000 +# CONFIG_MDNS_STRICT_MODE is not set +CONFIG_MDNS_TIMER_PERIOD_MS=100 +# CONFIG_MDNS_NETWORKING_SOCKET is not set +CONFIG_MDNS_MULTIPLE_INSTANCE=y +# end of mDNS + +# +# ESP-MQTT Configurations +# +CONFIG_MQTT_PROTOCOL_311=y +CONFIG_MQTT_TRANSPORT_SSL=y +CONFIG_MQTT_TRANSPORT_WEBSOCKET=y +CONFIG_MQTT_TRANSPORT_WEBSOCKET_SECURE=y +# CONFIG_MQTT_MSG_ID_INCREMENTAL is not set +# CONFIG_MQTT_SKIP_PUBLISH_IF_DISCONNECTED is not set +# CONFIG_MQTT_REPORT_DELETED_MESSAGES is not set +# CONFIG_MQTT_USE_CUSTOM_CONFIG is not set +# CONFIG_MQTT_TASK_CORE_SELECTION_ENABLED is not set +# CONFIG_MQTT_CUSTOM_OUTBOX is not set +# end of ESP-MQTT Configurations + +# +# Newlib +# +CONFIG_NEWLIB_STDOUT_LINE_ENDING_CRLF=y +# CONFIG_NEWLIB_STDOUT_LINE_ENDING_LF is not set +# CONFIG_NEWLIB_STDOUT_LINE_ENDING_CR is not set +# CONFIG_NEWLIB_STDIN_LINE_ENDING_CRLF is not set +# CONFIG_NEWLIB_STDIN_LINE_ENDING_LF is not set +CONFIG_NEWLIB_STDIN_LINE_ENDING_CR=y +# CONFIG_NEWLIB_NANO_FORMAT is not set +# end of Newlib + +# +# NVS +# +# end of NVS + +# +# OpenSSL +# +# CONFIG_OPENSSL_DEBUG is not set +CONFIG_OPENSSL_ERROR_STACK=y +# CONFIG_OPENSSL_ASSERT_DO_NOTHING is not set +CONFIG_OPENSSL_ASSERT_EXIT=y +# end of OpenSSL + +# +# OpenThread +# +# CONFIG_OPENTHREAD_ENABLED is not set +# end of OpenThread + +# +# PThreads +# +CONFIG_PTHREAD_TASK_PRIO_DEFAULT=5 +CONFIG_PTHREAD_TASK_STACK_SIZE_DEFAULT=3072 +CONFIG_PTHREAD_STACK_MIN=768 +CONFIG_PTHREAD_TASK_CORE_DEFAULT=-1 +CONFIG_PTHREAD_TASK_NAME_DEFAULT="pthread" +# end of PThreads + +# +# SPI Flash driver +# +# CONFIG_SPI_FLASH_VERIFY_WRITE is not set +# CONFIG_SPI_FLASH_ENABLE_COUNTERS is not set +CONFIG_SPI_FLASH_ROM_DRIVER_PATCH=y +# CONFIG_SPI_FLASH_ROM_IMPL is not set +CONFIG_SPI_FLASH_DANGEROUS_WRITE_ABORTS=y +# CONFIG_SPI_FLASH_DANGEROUS_WRITE_FAILS is not set +# CONFIG_SPI_FLASH_DANGEROUS_WRITE_ALLOWED is not set +# CONFIG_SPI_FLASH_USE_LEGACY_IMPL is not set +# CONFIG_SPI_FLASH_SHARE_SPI1_BUS is not set +# CONFIG_SPI_FLASH_BYPASS_BLOCK_ERASE is not set +CONFIG_SPI_FLASH_YIELD_DURING_ERASE=y +CONFIG_SPI_FLASH_ERASE_YIELD_DURATION_MS=20 +CONFIG_SPI_FLASH_ERASE_YIELD_TICKS=1 +# CONFIG_SPI_FLASH_AUTO_SUSPEND is not set +CONFIG_SPI_FLASH_WRITE_CHUNK_SIZE=8192 +# CONFIG_SPI_FLASH_SIZE_OVERRIDE is not set +# CONFIG_SPI_FLASH_CHECK_ERASE_TIMEOUT_DISABLED is not set +# CONFIG_SPI_FLASH_OVERRIDE_CHIP_DRIVER_LIST is not set + +# +# Auto-detect flash chips +# +CONFIG_SPI_FLASH_SUPPORT_ISSI_CHIP=y +CONFIG_SPI_FLASH_SUPPORT_MXIC_CHIP=y +CONFIG_SPI_FLASH_SUPPORT_GD_CHIP=y +CONFIG_SPI_FLASH_SUPPORT_WINBOND_CHIP=y +CONFIG_SPI_FLASH_SUPPORT_BOYA_CHIP=y +# end of Auto-detect flash chips + +CONFIG_SPI_FLASH_ENABLE_ENCRYPTED_READ_WRITE=y +# end of SPI Flash driver + +# +# SPIFFS Configuration +# +CONFIG_SPIFFS_MAX_PARTITIONS=3 + +# +# SPIFFS Cache Configuration +# +CONFIG_SPIFFS_CACHE=y +CONFIG_SPIFFS_CACHE_WR=y +# CONFIG_SPIFFS_CACHE_STATS is not set +# end of SPIFFS Cache Configuration + +CONFIG_SPIFFS_PAGE_CHECK=y +CONFIG_SPIFFS_GC_MAX_RUNS=10 +# CONFIG_SPIFFS_GC_STATS is not set +CONFIG_SPIFFS_PAGE_SIZE=256 +CONFIG_SPIFFS_OBJ_NAME_LEN=32 +# CONFIG_SPIFFS_FOLLOW_SYMLINKS is not set +CONFIG_SPIFFS_USE_MAGIC=y +CONFIG_SPIFFS_USE_MAGIC_LENGTH=y +CONFIG_SPIFFS_META_LENGTH=4 +CONFIG_SPIFFS_USE_MTIME=y + +# +# Debug Configuration +# +# CONFIG_SPIFFS_DBG is not set +# CONFIG_SPIFFS_API_DBG is not set +# CONFIG_SPIFFS_GC_DBG is not set +# CONFIG_SPIFFS_CACHE_DBG is not set +# CONFIG_SPIFFS_CHECK_DBG is not set +# CONFIG_SPIFFS_TEST_VISUALISATION is not set +# end of Debug Configuration +# end of SPIFFS Configuration + +# +# TCP Transport +# + +# +# Websocket +# +CONFIG_WS_TRANSPORT=y +CONFIG_WS_BUFFER_SIZE=1024 +# end of Websocket +# end of TCP Transport + +# +# Unity unit testing library +# +CONFIG_UNITY_ENABLE_FLOAT=y +CONFIG_UNITY_ENABLE_DOUBLE=y +# CONFIG_UNITY_ENABLE_64BIT is not set +# CONFIG_UNITY_ENABLE_COLOR is not set +CONFIG_UNITY_ENABLE_IDF_TEST_RUNNER=y +# CONFIG_UNITY_ENABLE_FIXTURE is not set +# CONFIG_UNITY_ENABLE_BACKTRACE_ON_FAIL is not set +# end of Unity unit testing library + +# +# Virtual file system +# +CONFIG_VFS_SUPPORT_IO=y +CONFIG_VFS_SUPPORT_DIR=y +CONFIG_VFS_SUPPORT_SELECT=y +CONFIG_VFS_SUPPRESS_SELECT_DEBUG_OUTPUT=y +CONFIG_VFS_SUPPORT_TERMIOS=y + +# +# Host File System I/O (Semihosting) +# +CONFIG_VFS_SEMIHOSTFS_MAX_MOUNT_POINTS=1 +CONFIG_VFS_SEMIHOSTFS_HOST_PATH_MAX_LEN=128 +# end of Host File System I/O (Semihosting) +# end of Virtual file system + +# +# Wear Levelling +# +# CONFIG_WL_SECTOR_SIZE_512 is not set +CONFIG_WL_SECTOR_SIZE_4096=y +CONFIG_WL_SECTOR_SIZE=4096 +# end of Wear Levelling + +# +# Wi-Fi Provisioning Manager +# +CONFIG_WIFI_PROV_SCAN_MAX_ENTRIES=16 +CONFIG_WIFI_PROV_AUTOSTOP_TIMEOUT=30 +# end of Wi-Fi Provisioning Manager + +# +# Supplicant +# +CONFIG_WPA_MBEDTLS_CRYPTO=y +# CONFIG_WPA_WAPI_PSK is not set +# CONFIG_WPA_SUITE_B_192 is not set +# CONFIG_WPA_DEBUG_PRINT is not set +# CONFIG_WPA_TESTING_OPTIONS is not set +# CONFIG_WPA_WPS_STRICT is not set +# CONFIG_WPA_11KV_SUPPORT is not set +# end of Supplicant +# end of Component config + +# +# Compatibility options +# +# CONFIG_LEGACY_INCLUDE_COMMON_HEADERS is not set +# end of Compatibility options + +# Deprecated options for backward compatibility +CONFIG_TOOLPREFIX="riscv32-esp-elf-" +# CONFIG_LOG_BOOTLOADER_LEVEL_NONE is not set +# CONFIG_LOG_BOOTLOADER_LEVEL_ERROR is not set +# CONFIG_LOG_BOOTLOADER_LEVEL_WARN is not set +CONFIG_LOG_BOOTLOADER_LEVEL_INFO=y +# CONFIG_LOG_BOOTLOADER_LEVEL_DEBUG is not set +# CONFIG_LOG_BOOTLOADER_LEVEL_VERBOSE is not set +CONFIG_LOG_BOOTLOADER_LEVEL=3 +# CONFIG_APP_ROLLBACK_ENABLE is not set +# CONFIG_FLASH_ENCRYPTION_ENABLED is not set +# CONFIG_FLASHMODE_QIO is not set +# CONFIG_FLASHMODE_QOUT is not set +CONFIG_FLASHMODE_DIO=y +# CONFIG_FLASHMODE_DOUT is not set +# CONFIG_MONITOR_BAUD_9600B is not set +# CONFIG_MONITOR_BAUD_57600B is not set +CONFIG_MONITOR_BAUD_115200B=y +# CONFIG_MONITOR_BAUD_230400B is not set +# CONFIG_MONITOR_BAUD_921600B is not set +# CONFIG_MONITOR_BAUD_2MB is not set +# CONFIG_MONITOR_BAUD_OTHER is not set +CONFIG_MONITOR_BAUD_OTHER_VAL=115200 +CONFIG_MONITOR_BAUD=115200 +CONFIG_COMPILER_OPTIMIZATION_LEVEL_DEBUG=y +# CONFIG_COMPILER_OPTIMIZATION_LEVEL_RELEASE is not set +CONFIG_OPTIMIZATION_ASSERTIONS_ENABLED=y +# CONFIG_OPTIMIZATION_ASSERTIONS_SILENT is not set +# CONFIG_OPTIMIZATION_ASSERTIONS_DISABLED is not set +CONFIG_OPTIMIZATION_ASSERTION_LEVEL=2 +# CONFIG_CXX_EXCEPTIONS is not set +CONFIG_STACK_CHECK_NONE=y +# CONFIG_STACK_CHECK_NORM is not set +# CONFIG_STACK_CHECK_STRONG is not set +# CONFIG_STACK_CHECK_ALL is not set +# CONFIG_WARN_WRITE_STRINGS is not set +# CONFIG_DISABLE_GCC8_WARNINGS is not set +# CONFIG_ESP32_APPTRACE_DEST_TRAX is not set +CONFIG_ESP32_APPTRACE_DEST_NONE=y +CONFIG_ESP32_APPTRACE_LOCK_ENABLE=y +CONFIG_ADC2_DISABLE_DAC=y +# CONFIG_EVENT_LOOP_PROFILING is not set +CONFIG_POST_EVENTS_FROM_ISR=y +CONFIG_POST_EVENTS_FROM_IRAM_ISR=y +CONFIG_ESP_SYSTEM_PD_FLASH=y +CONFIG_ESP32C3_LIGHTSLEEP_GPIO_RESET_WORKAROUND=y +CONFIG_IPC_TASK_STACK_SIZE=1536 +CONFIG_ESP32_PHY_CALIBRATION_AND_DATA_STORAGE=y +# CONFIG_ESP32_PHY_INIT_DATA_IN_PARTITION is not set +CONFIG_ESP32_PHY_MAX_WIFI_TX_POWER=20 +CONFIG_ESP32_PHY_MAX_TX_POWER=20 +CONFIG_ESP_SYSTEM_PM_POWER_DOWN_CPU=y +# CONFIG_ESP32S2_PANIC_PRINT_HALT is not set +CONFIG_ESP32S2_PANIC_PRINT_REBOOT=y +# CONFIG_ESP32S2_PANIC_SILENT_REBOOT is not set +# CONFIG_ESP32S2_PANIC_GDBSTUB is not set +CONFIG_ESP32S2_ALLOW_RTC_FAST_MEM_AS_HEAP=y +CONFIG_ESP32H2_MEMPROT_FEATURE=y +CONFIG_ESP32H2_MEMPROT_FEATURE_LOCK=y +CONFIG_SYSTEM_EVENT_QUEUE_SIZE=32 +CONFIG_SYSTEM_EVENT_TASK_STACK_SIZE=2304 +CONFIG_MAIN_TASK_STACK_SIZE=3584 +CONFIG_CONSOLE_UART_DEFAULT=y +# CONFIG_CONSOLE_UART_CUSTOM is not set +# CONFIG_ESP_CONSOLE_UART_NONE is not set +CONFIG_CONSOLE_UART=y +CONFIG_CONSOLE_UART_NUM=0 +CONFIG_CONSOLE_UART_BAUDRATE=115200 +# CONFIG_INT_WDT is not set +# CONFIG_TASK_WDT is not set +CONFIG_TIMER_TASK_STACK_SIZE=3584 +# CONFIG_EXTERNAL_COEX_ENABLE is not set +# CONFIG_ESP32_ENABLE_COREDUMP_TO_FLASH is not set +# CONFIG_ESP32_ENABLE_COREDUMP_TO_UART is not set +CONFIG_ESP32_ENABLE_COREDUMP_TO_NONE=y +CONFIG_MB_MASTER_TIMEOUT_MS_RESPOND=150 +CONFIG_MB_MASTER_DELAY_MS_CONVERT=200 +CONFIG_MB_QUEUE_LENGTH=20 +CONFIG_MB_SERIAL_TASK_STACK_SIZE=4096 +CONFIG_MB_SERIAL_BUF_SIZE=256 +CONFIG_MB_SERIAL_TASK_PRIO=10 +CONFIG_MB_CONTROLLER_SLAVE_ID_SUPPORT=y +CONFIG_MB_CONTROLLER_SLAVE_ID=0x00112233 +CONFIG_MB_CONTROLLER_NOTIFY_TIMEOUT=20 +CONFIG_MB_CONTROLLER_NOTIFY_QUEUE_SIZE=20 +CONFIG_MB_CONTROLLER_STACK_SIZE=4096 +CONFIG_MB_EVENT_QUEUE_TIMEOUT=20 +# CONFIG_MB_TIMER_PORT_ENABLED is not set +CONFIG_MB_TIMER_GROUP=0 +CONFIG_MB_TIMER_INDEX=0 +# CONFIG_ENABLE_STATIC_TASK_CLEAN_UP_HOOK is not set +CONFIG_TIMER_TASK_PRIORITY=1 +CONFIG_TIMER_TASK_STACK_DEPTH=2048 +CONFIG_TIMER_QUEUE_LENGTH=10 +# CONFIG_L2_TO_L3_COPY is not set +# CONFIG_USE_ONLY_LWIP_SELECT is not set +CONFIG_ESP_GRATUITOUS_ARP=y +CONFIG_GARP_TMR_INTERVAL=60 +CONFIG_TCPIP_RECVMBOX_SIZE=32 +CONFIG_TCP_MAXRTX=12 +CONFIG_TCP_SYNMAXRTX=12 +CONFIG_TCP_MSS=1440 +CONFIG_TCP_MSL=60000 +CONFIG_TCP_SND_BUF_DEFAULT=5744 +CONFIG_TCP_WND_DEFAULT=5744 +CONFIG_TCP_RECVMBOX_SIZE=6 +CONFIG_TCP_QUEUE_OOSEQ=y +# CONFIG_ESP_TCP_KEEP_CONNECTION_WHEN_IP_CHANGES is not set +CONFIG_TCP_OVERSIZE_MSS=y +# CONFIG_TCP_OVERSIZE_QUARTER_MSS is not set +# CONFIG_TCP_OVERSIZE_DISABLE is not set +CONFIG_UDP_RECVMBOX_SIZE=6 +CONFIG_TCPIP_TASK_STACK_SIZE=3072 +CONFIG_TCPIP_TASK_AFFINITY_NO_AFFINITY=y +# CONFIG_TCPIP_TASK_AFFINITY_CPU0 is not set +CONFIG_TCPIP_TASK_AFFINITY=0x7FFFFFFF +# CONFIG_PPP_SUPPORT is not set +CONFIG_ESP32_PTHREAD_TASK_PRIO_DEFAULT=5 +CONFIG_ESP32_PTHREAD_TASK_STACK_SIZE_DEFAULT=3072 +CONFIG_ESP32_PTHREAD_STACK_MIN=768 +CONFIG_ESP32_PTHREAD_TASK_CORE_DEFAULT=-1 +CONFIG_ESP32_PTHREAD_TASK_NAME_DEFAULT="pthread" +CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ABORTS=y +# CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_FAILS is not set +# CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ALLOWED is not set +CONFIG_SUPPRESS_SELECT_DEBUG_OUTPUT=y +CONFIG_SUPPORT_TERMIOS=y +CONFIG_SEMIHOSTFS_MAX_MOUNT_POINTS=1 +CONFIG_SEMIHOSTFS_HOST_PATH_MAX_LEN=128 +# End of deprecated options