Skip to content

R
rt-thread

2345VOR / rt-thread
与 Fork 源项目一致

Fork自 RT-Thread / rt-thread

通知 1
Star 0
Fork 0
R
rt-thread

体验新版 GitCode，发现更多精彩内容 >>

提交 6acf4a45 编写于 作者: B Bernard Xiong
浏览文件
操作

[BSP] Update UART and GPIO driver with framework in STM32F4

上级 1bb425e8
隐藏空白更改
内联 并排
Showing with 308 addition and 909 deletion
bsp/stm32f40x/drivers/board.c
浏览文件 @ 6acf4a45
......@@ -17,6 +17,8 @@
#include "stm32f4xx.h"
#include "board.h"
#include "usart.h"
#include "gpio.h"
/**
* @addtogroup STM32
......@@ -92,6 +94,8 @@ void rt_hw_board_init()
SysTick_Configuration();
rt_hw_usart_init();
stm32_hw_pin_init();
#ifdef RT_USING_CONSOLE
rt_console_set_device(CONSOLE_DEVICE);
#endif
......
bsp/stm32f40x/drivers/board.h
浏览文件 @ 6acf4a45
......@@ -40,11 +40,6 @@
#define STM32_SRAM_SIZE 128
#define STM32_SRAM_END (0x20000000 + STM32_SRAM_SIZE * 1024)
//#define RT_USING_UART1
#define RT_USING_UART2
//#define RT_USING_UART3
//#define RT_USING_UART6
// <o> Console on USART: <0=> no console <1=>USART 1 <2=>USART 2 <3=> USART 3
// <i>Default: 1
#define STM32_CONSOLE_USART 2
......@@ -63,11 +58,6 @@ void rt_hw_board_init(void);
#define FINSH_DEVICE_NAME CONSOLE_DEVICE
void rt_hw_usart_init(void);
/* SD Card init function */
void rt_hw_msd_init(void);
#endif
// <<< Use Configuration Wizard in Context Menu >>>
bsp/stm32f40x/drivers/serial.c 已删除 100644 → 0
浏览文件 @ 1bb425e8
/*
* File : serial.c
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2009, RT-Thread Development Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2009-02-05 Bernard first version
* 2009-10-25 Bernard fix rt_serial_read bug when there is no data
* in the buffer.
* 2010-03-29 Bernard cleanup code.
*/
#include "serial.h"
#include <stm32f4xx_dma.h>
#include <stm32f4xx_usart.h>
static void rt_serial_enable_dma(DMA_Stream_TypeDef* dma_channel,
rt_uint32_t address, rt_uint32_t size);
/**
* @addtogroup STM32
*/
/*@{*/
/* RT-Thread Device Interface */
static rt_err_t rt_serial_init (rt_device_t dev)
{
struct stm32_serial_device* uart = (struct stm32_serial_device*) dev->user_data;
if (!(dev->flag & RT_DEVICE_FLAG_ACTIVATED))
{
if (dev->flag & RT_DEVICE_FLAG_INT_RX)
{
rt_memset(uart->int_rx->rx_buffer, 0,
sizeof(uart->int_rx->rx_buffer));
uart->int_rx->read_index = 0;
uart->int_rx->save_index = 0;
}
if (dev->flag & RT_DEVICE_FLAG_DMA_TX)
{
RT_ASSERT(uart->dma_tx->dma_channel != RT_NULL);
uart->dma_tx->list_head = uart->dma_tx->list_tail = RT_NULL;
/* init data node memory pool */
rt_mp_init(&(uart->dma_tx->data_node_mp), "dn",
uart->dma_tx->data_node_mem_pool,
sizeof(uart->dma_tx->data_node_mem_pool),
sizeof(struct stm32_serial_data_node));
}
/* Enable USART */
USART_Cmd(uart->uart_device, ENABLE);
dev->flag |= RT_DEVICE_FLAG_ACTIVATED;
}
return RT_EOK;
}
static rt_err_t rt_serial_open(rt_device_t dev, rt_uint16_t oflag)
{
return RT_EOK;
}
static rt_err_t rt_serial_close(rt_device_t dev)
{
return RT_EOK;
}
static rt_size_t rt_serial_read (rt_device_t dev, rt_off_t pos, void* buffer, rt_size_t size)
{
rt_uint8_t* ptr;
rt_err_t err_code;
struct stm32_serial_device* uart;
ptr = buffer;
err_code = RT_EOK;
uart = (struct stm32_serial_device*)dev->user_data;
if (dev->flag & RT_DEVICE_FLAG_INT_RX)
{
/* interrupt mode Rx */
while (size)
{
rt_base_t level;
/* disable interrupt */
level = rt_hw_interrupt_disable();
if (uart->int_rx->read_index != uart->int_rx->save_index)
{
/* read a character */
*ptr++ = uart->int_rx->rx_buffer[uart->int_rx->read_index];
size--;
/* move to next position */
uart->int_rx->read_index ++;
if (uart->int_rx->read_index >= UART_RX_BUFFER_SIZE)
uart->int_rx->read_index = 0;
}
else
{
/* set error code */
err_code = -RT_EEMPTY;
/* enable interrupt */
rt_hw_interrupt_enable(level);
break;
}
/* enable interrupt */
rt_hw_interrupt_enable(level);
}
}
else
{
/* polling mode */
while ((rt_uint32_t)ptr - (rt_uint32_t)buffer < size)
{
while (uart->uart_device->SR & USART_FLAG_RXNE)
{
*ptr = uart->uart_device->DR & 0xff;
ptr ++;
}
}
}
/* set error code */
rt_set_errno(err_code);
return (rt_uint32_t)ptr - (rt_uint32_t)buffer;
}
static void rt_serial_enable_dma(DMA_Stream_TypeDef* dma_channel,
rt_uint32_t address, rt_uint32_t size)
{
RT_ASSERT(dma_channel != RT_NULL);
/* disable DMA */
DMA_Cmd(dma_channel, DISABLE);
/* set buffer address */
dma_channel->M0AR = address;
/* set size */
dma_channel->NDTR = size;
/* enable DMA */
DMA_Cmd(dma_channel, ENABLE);
}
static rt_size_t rt_serial_write (rt_device_t dev, rt_off_t pos, const void* buffer, rt_size_t size)
{
rt_uint8_t* ptr;
rt_err_t err_code;
struct stm32_serial_device* uart;
err_code = RT_EOK;
ptr = (rt_uint8_t*)buffer;
uart = (struct stm32_serial_device*)dev->user_data;
if (dev->flag & RT_DEVICE_FLAG_INT_TX)
{
/* interrupt mode Tx, does not support */
RT_ASSERT(0);
}
else if (dev->flag & RT_DEVICE_FLAG_DMA_TX)
{
/* DMA mode Tx */
/* allocate a data node */
struct stm32_serial_data_node* data_node = (struct stm32_serial_data_node*)
rt_mp_alloc (&(uart->dma_tx->data_node_mp), RT_WAITING_FOREVER);
if (data_node == RT_NULL)
{
/* set error code */
err_code = -RT_ENOMEM;
}
else
{
rt_uint32_t level;
/* fill data node */
data_node->data_ptr = ptr;
data_node->data_size = size;
/* insert to data link */
data_node->next = RT_NULL;
/* disable interrupt */
level = rt_hw_interrupt_disable();
data_node->prev = uart->dma_tx->list_tail;
if (uart->dma_tx->list_tail != RT_NULL)
uart->dma_tx->list_tail->next = data_node;
uart->dma_tx->list_tail = data_node;
if (uart->dma_tx->list_head == RT_NULL)
{
/* start DMA to transmit data */
uart->dma_tx->list_head = data_node;
/* Enable DMA Channel */
rt_serial_enable_dma(uart->dma_tx->dma_channel,
(rt_uint32_t)uart->dma_tx->list_head->data_ptr,
uart->dma_tx->list_head->data_size);
}
/* enable interrupt */
rt_hw_interrupt_enable(level);
}
}
else
{
/* polling mode */
if (dev->flag & RT_DEVICE_FLAG_STREAM)
{
/* stream mode */
while (size)
{
if (*ptr == '\n')
{
while (!(uart->uart_device->SR & USART_FLAG_TXE));
uart->uart_device->DR = '\r';
}
while (!(uart->uart_device->SR & USART_FLAG_TXE));
uart->uart_device->DR = (*ptr & 0x1FF);
++ptr; --size;
}
}
else
{
/* write data directly */
while (size)
{
while (!(uart->uart_device->SR & USART_FLAG_TXE));
uart->uart_device->DR = (*ptr & 0x1FF);
++ptr; --size;
}
}
}
/* set error code */
rt_set_errno(err_code);
return (rt_uint32_t)ptr - (rt_uint32_t)buffer;
}
static rt_err_t rt_serial_control (rt_device_t dev, rt_uint8_t cmd, void *args)
{
struct stm32_serial_device* uart;
RT_ASSERT(dev != RT_NULL);
uart = (struct stm32_serial_device*)dev->user_data;
switch (cmd)
{
case RT_DEVICE_CTRL_SUSPEND:
/* suspend device */
dev->flag |= RT_DEVICE_FLAG_SUSPENDED;
USART_Cmd(uart->uart_device, DISABLE);
break;
case RT_DEVICE_CTRL_RESUME:
/* resume device */
dev->flag &= ~RT_DEVICE_FLAG_SUSPENDED;
USART_Cmd(uart->uart_device, ENABLE);
break;
}
return RT_EOK;
}
/*
* serial register for STM32
* support STM32F103VB and STM32F103ZE
*/
rt_err_t rt_hw_serial_register(rt_device_t device, const char* name, rt_uint32_t flag, struct stm32_serial_device *serial)
{
RT_ASSERT(device != RT_NULL);
if ((flag & RT_DEVICE_FLAG_DMA_RX) ||
(flag & RT_DEVICE_FLAG_INT_TX))
{
RT_ASSERT(0);
}
device->type = RT_Device_Class_Char;
device->rx_indicate = RT_NULL;
device->tx_complete = RT_NULL;
device->init = rt_serial_init;
device->open = rt_serial_open;
device->close = rt_serial_close;
device->read = rt_serial_read;
device->write = rt_serial_write;
device->control = rt_serial_control;
device->user_data = serial;
/* register a character device */
return rt_device_register(device, name, RT_DEVICE_FLAG_RDWR | flag);
}
/* ISR for serial interrupt */
void rt_hw_serial_isr(rt_device_t device)
{
struct stm32_serial_device* uart = (struct stm32_serial_device*) device->user_data;
if(USART_GetITStatus(uart->uart_device, USART_IT_RXNE) != RESET)
{
/* interrupt mode receive */
RT_ASSERT(device->flag & RT_DEVICE_FLAG_INT_RX);
/* save on rx buffer */
while (uart->uart_device->SR & USART_FLAG_RXNE)
{
rt_base_t level;
/* disable interrupt */
level = rt_hw_interrupt_disable();
/* save character */
uart->int_rx->rx_buffer[uart->int_rx->save_index] = uart->uart_device->DR & 0xff;
uart->int_rx->save_index ++;
if (uart->int_rx->save_index >= UART_RX_BUFFER_SIZE)
uart->int_rx->save_index = 0;
/* if the next position is read index, discard this 'read char' */
if (uart->int_rx->save_index == uart->int_rx->read_index)
{
uart->int_rx->read_index ++;
if (uart->int_rx->read_index >= UART_RX_BUFFER_SIZE)
uart->int_rx->read_index = 0;
}
/* enable interrupt */
rt_hw_interrupt_enable(level);
}
/* clear interrupt */
USART_ClearITPendingBit(uart->uart_device, USART_IT_RXNE);
/* invoke callback */
if (device->rx_indicate != RT_NULL)
{
rt_size_t rx_length;
/* get rx length */
rx_length = uart->int_rx->read_index > uart->int_rx->save_index ?
UART_RX_BUFFER_SIZE - uart->int_rx->read_index + uart->int_rx->save_index :
uart->int_rx->save_index - uart->int_rx->read_index;
device->rx_indicate(device, rx_length);
}
}
if (USART_GetITStatus(uart->uart_device, USART_IT_TC) != RESET)
{
/* clear interrupt */
USART_ClearITPendingBit(uart->uart_device, USART_IT_TC);
}
}
/*
* ISR for DMA mode Tx
*/
void rt_hw_serial_dma_tx_isr(rt_device_t device)
{
rt_uint32_t level;
struct stm32_serial_data_node* data_node;
struct stm32_serial_device* uart = (struct stm32_serial_device*) device->user_data;
/* DMA mode receive */
RT_ASSERT(device->flag & RT_DEVICE_FLAG_DMA_TX);
/* get the first data node */
data_node = uart->dma_tx->list_head;
RT_ASSERT(data_node != RT_NULL);
/* invoke call to notify tx complete */
if (device->tx_complete != RT_NULL)
device->tx_complete(device, data_node->data_ptr);
/* disable interrupt */
level = rt_hw_interrupt_disable();
/* remove list head */
uart->dma_tx->list_head = data_node->next;
if (uart->dma_tx->list_head == RT_NULL) /* data link empty */
uart->dma_tx->list_tail = RT_NULL;
/* enable interrupt */
rt_hw_interrupt_enable(level);
/* release data node memory */
rt_mp_free(data_node);
if (uart->dma_tx->list_head != RT_NULL)
{
/* transmit next data node */
rt_serial_enable_dma(uart->dma_tx->dma_channel,
(rt_uint32_t)uart->dma_tx->list_head->data_ptr,
uart->dma_tx->list_head->data_size);
}
else
{
/* no data to be transmitted, disable DMA */
DMA_Cmd(uart->dma_tx->dma_channel, DISABLE);
}
}
/*@}*/
bsp/stm32f40x/drivers/serial.h 已删除 100644 → 0
浏览文件 @ 1bb425e8
/*
* File : serial.h
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2009 - 2010, RT-Thread Development Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2009-01-05 Bernard first version
* 2010-03-29 Bernard remove interrupt tx and DMA rx mode.
*/
#ifndef __RT_HW_SERIAL_H__
#define __RT_HW_SERIAL_H__
#include <rthw.h>
#include <rtthread.h>
/* STM32F40x library definitions */
#include <stm32f4xx.h>
#define UART_RX_BUFFER_SIZE 64
#define UART_TX_DMA_NODE_SIZE 4
/* data node for Tx Mode */
struct stm32_serial_data_node
{
rt_uint8_t *data_ptr;
rt_size_t data_size;
struct stm32_serial_data_node *next, *prev;
};
struct stm32_serial_dma_tx
{
/* DMA Channel */
DMA_Stream_TypeDef* dma_channel;
/* data list head and tail */
struct stm32_serial_data_node *list_head, *list_tail;
/* data node memory pool */
struct rt_mempool data_node_mp;
rt_uint8_t data_node_mem_pool[UART_TX_DMA_NODE_SIZE *
(sizeof(struct stm32_serial_data_node) + sizeof(void*))];
};
struct stm32_serial_int_rx
{
rt_uint8_t rx_buffer[UART_RX_BUFFER_SIZE];
rt_uint32_t read_index, save_index;
};
struct stm32_serial_device
{
USART_TypeDef* uart_device;
/* rx structure */
struct stm32_serial_int_rx* int_rx;
/* tx structure */
struct stm32_serial_dma_tx* dma_tx;
};
rt_err_t rt_hw_serial_register(rt_device_t device, const char* name, rt_uint32_t flag, struct stm32_serial_device *serial);
void rt_hw_serial_isr(rt_device_t device);
void rt_hw_serial_dma_tx_isr(rt_device_t device);
#endif
bsp/stm32f40x/drivers/stm32f4xx_it.c
浏览文件 @ 6acf4a45
......@@ -54,16 +54,6 @@ void NMI_Handler(void)
{
}
/**
* @brief This function handles Hard Fault exception.
* @param None
* @retval None
*/
//void HardFault_Handler(void)
//{
// // definition in libcpu/arm/cortex-m4/context_*.S
//}
/**
* @brief This function handles Memory Manage exception.
* @param None
......@@ -112,100 +102,6 @@ void SVC_Handler(void)
{
}
/**
* @brief This function handles Debug Monitor exception.
* @param None
* @retval None
*/
//void DebugMon_Handler(void)
//{
// defined in gdb/libcpu/cortexm/gdb_gcc.S
//}
/**
* @brief This function handles PendSVC exception.
* @param None
* @retval None
*/
//void PendSV_Handler(void)
//{
// // defined in libcpu/arm/cortex-m4/context_*.S
//}
/**
* @brief This function handles SysTick Handler.
* @param None
* @retval None
*/
//void SysTick_Handler(void)
//{
// // defined in boarc.c
//}
/******************************************************************************/
/* STM32F4xx Peripherals Interrupt Handlers */
/* Add here the Interrupt Handler for the used peripheral(s) (PPP), for the */
/* available peripheral interrupt handler's name please refer to the startup */
/* file (startup_stm32f4xx.s). */
/******************************************************************************/
/**
* @brief This function handles PPP interrupt request.
* @param None
* @retval None
*/
/*void PPP_IRQHandler(void)
{
}*/
void USART1_IRQHandler(void)
{
#ifdef RT_USING_UART1
extern struct rt_device uart1_device;
extern void rt_hw_serial_isr(struct rt_device *device);
/* enter interrupt */
rt_interrupt_enter();
rt_hw_serial_isr(&uart1_device);
/* leave interrupt */
rt_interrupt_leave();
#endif
}
void USART2_IRQHandler(void)
{
#ifdef RT_USING_UART2
extern struct rt_device uart2_device;
extern void rt_hw_serial_isr(struct rt_device *device);
/* enter interrupt */
rt_interrupt_enter();
rt_hw_serial_isr(&uart2_device);
/* leave interrupt */
rt_interrupt_leave();
#endif
}
void USART3_IRQHandler(void)
{
#ifdef RT_USING_UART3
extern struct rt_device uart3_device;
extern void rt_hw_serial_isr(struct rt_device *device);
/* enter interrupt */
rt_interrupt_enter();
rt_hw_serial_isr(&uart3_device);
/* leave interrupt */
rt_interrupt_leave();
#endif
}
/**
* @}
*/
......
bsp/stm32f40x/drivers/usart.c
浏览文件 @ 6acf4a45
......@@ -12,148 +12,273 @@
* 2009-01-05 Bernard the first version
* 2010-03-29 Bernard remove interrupt Tx and DMA Rx mode
* 2012-02-08 aozima update for F4.
* 2012-07-28 aozima update for ART board.
*/
#include "stm32f4xx.h"
#include "usart.h"
#include "board.h"
#include <serial.h>
/*
* Use UART1 as console output and finsh input
* interrupt Rx and poll Tx (stream mode)
*
* Use UART2 with interrupt Rx and poll Tx
* Use UART3 with DMA Tx and interrupt Rx -- DMA channel 2
*
* USART DMA setting on STM32
* USART1 Tx --> DMA Channel 4
* USART1 Rx --> DMA Channel 5
* USART2 Tx --> DMA Channel 7
* USART2 Rx --> DMA Channel 6
* USART3 Tx --> DMA Channel 2
* USART3 Rx --> DMA Channel 3
*/
#include <rtdevice.h>
#ifdef RT_USING_UART1
struct stm32_serial_int_rx uart1_int_rx;
struct stm32_serial_device uart1 =
/* UART GPIO define. */
#define UART1_GPIO_TX GPIO_Pin_6
#define UART1_TX_PIN_SOURCE GPIO_PinSource6
#define UART1_GPIO_RX GPIO_Pin_7
#define UART1_RX_PIN_SOURCE GPIO_PinSource7
#define UART1_GPIO GPIOB
#define UART1_GPIO_RCC RCC_AHB1Periph_GPIOB
#define RCC_APBPeriph_UART1 RCC_APB2Periph_USART1
#define UART1_TX_DMA DMA1_Channel4
#define UART1_RX_DMA DMA1_Channel5
#define UART2_GPIO_TX GPIO_Pin_2
#define UART2_TX_PIN_SOURCE GPIO_PinSource2
#define UART2_GPIO_RX GPIO_Pin_3
#define UART2_RX_PIN_SOURCE GPIO_PinSource3
#define UART2_GPIO GPIOA
#define UART2_GPIO_RCC RCC_AHB1Periph_GPIOA
#define RCC_APBPeriph_UART2 RCC_APB1Periph_USART2
#define UART2_TX_DMA DMA1_Channel4
#define UART2_RX_DMA DMA1_Channel5
#define UART3_GPIO_TX GPIO_Pin_8
#define UART3_TX_PIN_SOURCE GPIO_PinSource8
#define UART3_GPIO_RX GPIO_Pin_9
#define UART3_RX_PIN_SOURCE GPIO_PinSource9
#define UART3_GPIO GPIOD
#define UART3_GPIO_RCC RCC_AHB1Periph_GPIOD
#define RCC_APBPeriph_UART3 RCC_APB1Periph_USART3
#define UART3_TX_DMA DMA1_Stream1
#define UART3_RX_DMA DMA1_Stream3
/* STM32 uart driver */
struct stm32_uart
{
USART_TypeDef* uart_device;
IRQn_Type irq;
};
static rt_err_t stm32_configure(struct rt_serial_device *serial, struct serial_configure *cfg)
{
struct stm32_uart* uart;
USART_InitTypeDef USART_InitStructure;
RT_ASSERT(serial != RT_NULL);
RT_ASSERT(cfg != RT_NULL);
uart = (struct stm32_uart *)serial->parent.user_data;
if (cfg->baud_rate == BAUD_RATE_9600)
USART_InitStructure.USART_BaudRate = 9600;
else if (cfg->baud_rate == BAUD_RATE_115200)
USART_InitStructure.USART_BaudRate = 115200;
if (cfg->data_bits == DATA_BITS_8)
USART_InitStructure.USART_WordLength = USART_WordLength_8b;
if (cfg->stop_bits == STOP_BITS_1)
USART_InitStructure.USART_StopBits = USART_StopBits_1;
else if (cfg->stop_bits == STOP_BITS_2)
USART_InitStructure.USART_StopBits = USART_StopBits_2;
USART_InitStructure.USART_Parity = USART_Parity_No;
USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
USART_Init(uart->uart_device, &USART_InitStructure);
/* Enable USART */
USART_Cmd(uart->uart_device, ENABLE);
/* enable interrupt */
USART_ITConfig(uart->uart_device, USART_IT_RXNE, ENABLE);
return RT_EOK;
}
static rt_err_t stm32_control(struct rt_serial_device *serial, int cmd, void *arg)
{
struct stm32_uart* uart;
RT_ASSERT(serial != RT_NULL);
uart = (struct stm32_uart *)serial->parent.user_data;
switch (cmd)
{
case RT_DEVICE_CTRL_CLR_INT:
/* disable rx irq */
UART_DISABLE_IRQ(uart->irq);
break;
case RT_DEVICE_CTRL_SET_INT:
/* enable rx irq */
UART_ENABLE_IRQ(uart->irq);
break;
}
return RT_EOK;
}
static int stm32_putc(struct rt_serial_device *serial, char c)
{
struct stm32_uart* uart;
RT_ASSERT(serial != RT_NULL);
uart = (struct stm32_uart *)serial->parent.user_data;
while (!(uart->uart_device->SR & USART_FLAG_TXE));
uart->uart_device->DR = c;
return 1;
}
static int stm32_getc(struct rt_serial_device *serial)
{
int ch;
struct stm32_uart* uart;
RT_ASSERT(serial != RT_NULL);
uart = (struct stm32_uart *)serial->parent.user_data;
ch = -1;
if (uart->uart_device->SR & USART_FLAG_RXNE)
{
ch = uart->uart_device->DR & 0xff;
}
return ch;
}
static const struct rt_uart_ops stm32_uart_ops =
{
stm32_configure,
stm32_control,
stm32_putc,
stm32_getc,
};
#if defined(RT_USING_UART1)
/* UART1 device driver structure */
struct stm32_uart uart1 =
{
USART1,
&uart1_int_rx,
RT_NULL
USART1_IRQn,
};
struct rt_device uart1_device;
#endif
struct rt_serial_device serial1;
#ifdef RT_USING_UART2
struct stm32_serial_int_rx uart2_int_rx;
struct stm32_serial_device uart2 =
void USART1_IRQHandler(void)
{
struct stm32_uart* uart;
uart = &uart1;
/* enter interrupt */
rt_interrupt_enter();
if(USART_GetITStatus(uart->uart_device, USART_IT_RXNE) != RESET)
{
rt_hw_serial_isr(&serial1, RT_SERIAL_EVENT_RX_IND);
/* clear interrupt */
USART_ClearITPendingBit(uart->uart_device, USART_IT_RXNE);
}
if (USART_GetITStatus(uart->uart_device, USART_IT_TC) != RESET)
{
/* clear interrupt */
USART_ClearITPendingBit(uart->uart_device, USART_IT_TC);
}
/* leave interrupt */
rt_interrupt_leave();
}
#endif /* RT_USING_UART1 */
#if defined(RT_USING_UART2)
/* UART2 device driver structure */
struct stm32_uart uart2 =
{
USART2,
&uart2_int_rx,
RT_NULL
USART2_IRQn,
};
struct rt_device uart2_device;
#endif
struct rt_serial_device serial2;
#ifdef RT_USING_UART3
struct stm32_serial_int_rx uart3_int_rx;
struct stm32_serial_dma_tx uart3_dma_tx;
struct stm32_serial_device uart3 =
void USART2_IRQHandler(void)
{
USART3,
&uart3_int_rx,
&uart3_dma_tx
};
struct rt_device uart3_device;
#endif
struct stm32_uart* uart;
uart = &uart2;
/* enter interrupt */
rt_interrupt_enter();
if(USART_GetITStatus(uart->uart_device, USART_IT_RXNE) != RESET)
{
rt_hw_serial_isr(&serial2, RT_SERIAL_EVENT_RX_IND);
/* clear interrupt */
USART_ClearITPendingBit(uart->uart_device, USART_IT_RXNE);
}
if (USART_GetITStatus(uart->uart_device, USART_IT_TC) != RESET)
{
/* clear interrupt */
USART_ClearITPendingBit(uart->uart_device, USART_IT_TC);
}
/* leave interrupt */
rt_interrupt_leave();
}
#endif /* RT_USING_UART2 */
#ifdef RT_USING_UART6
struct stm32_serial_int_rx uart6_int_rx;
struct stm32_serial_device uart6 =
#if defined(RT_USING_UART3)
/* UART3 device driver structure */
struct stm32_uart uart3 =
{
USART6,
&uart6_int_rx,
RT_NULL
USART3,
USART3_IRQn,
};
struct rt_device uart6_device;
#endif
//#define USART1_DR_Base 0x40013804
//#define USART2_DR_Base 0x40004404
//#define USART3_DR_Base 0x40004804
/* USART1_REMAP = 0 */
#define UART1_GPIO_TX GPIO_Pin_9
#define UART1_TX_PIN_SOURCE GPIO_PinSource9
#define UART1_GPIO_RX GPIO_Pin_10
#define UART1_RX_PIN_SOURCE GPIO_PinSource10
#define UART1_GPIO GPIOA
#define UART1_GPIO_RCC RCC_AHB1Periph_GPIOA
#define RCC_APBPeriph_UART1 RCC_APB2Periph_USART1
#define UART1_TX_DMA DMA1_Channel4
#define UART1_RX_DMA DMA1_Channel5
#define UART2_GPIO_TX GPIO_Pin_2
#define UART2_TX_PIN_SOURCE GPIO_PinSource2
#define UART2_GPIO_RX GPIO_Pin_3
#define UART2_RX_PIN_SOURCE GPIO_PinSource3
#define UART2_GPIO GPIOA
#define UART2_GPIO_RCC RCC_AHB1Periph_GPIOA
#define RCC_APBPeriph_UART2 RCC_APB1Periph_USART2
/* USART3_REMAP[1:0] = 00 */
#define UART3_GPIO_TX GPIO_Pin_10
#define UART3_TX_PIN_SOURCE GPIO_PinSource10
#define UART3_GPIO_RX GPIO_Pin_11
#define UART3_RX_PIN_SOURCE GPIO_PinSource11
#define UART3_GPIO GPIOB
#define UART3_GPIO_RCC RCC_AHB1Periph_GPIOB
#define RCC_APBPeriph_UART3 RCC_APB1Periph_USART3
#define UART3_TX_DMA DMA1_Stream1
#define UART3_RX_DMA DMA1_Stream3
struct rt_serial_device serial3;
#define UART6_GPIO_TX GPIO_Pin_6
#define UART6_TX_PIN_SOURCE GPIO_PinSource6
#define UART6_GPIO_RX GPIO_Pin_7
#define UART6_RX_PIN_SOURCE GPIO_PinSource7
#define UART6_GPIO GPIOC
#define UART6_GPIO_RCC RCC_AHB1Periph_GPIOC
#define RCC_APBPeriph_UART6 RCC_APB2Periph_USART6
void USART3_IRQHandler(void)
{
struct stm32_uart* uart;
uart = &uart3;
/* enter interrupt */
rt_interrupt_enter();
if(USART_GetITStatus(uart->uart_device, USART_IT_RXNE) != RESET)
{
rt_hw_serial_isr(&serial3, RT_SERIAL_EVENT_RX_IND);
/* clear interrupt */
USART_ClearITPendingBit(uart->uart_device, USART_IT_RXNE);
}
if (USART_GetITStatus(uart->uart_device, USART_IT_TC) != RESET)
{
/* clear interrupt */
USART_ClearITPendingBit(uart->uart_device, USART_IT_TC);
}
/* leave interrupt */
rt_interrupt_leave();
}
#endif /* RT_USING_UART3 */
static void RCC_Configuration(void)
{
#ifdef RT_USING_UART1
/* Enable USART2 GPIO clocks */
/* Enable UART1 GPIO clocks */
RCC_AHB1PeriphClockCmd(UART1_GPIO_RCC, ENABLE);
/* Enable USART2 clock */
/* Enable UART1 clock */
RCC_APB2PeriphClockCmd(RCC_APBPeriph_UART1, ENABLE);
#endif
#endif /* RT_USING_UART1 */
#ifdef RT_USING_UART2
/* Enable USART2 GPIO clocks */
/* Enable UART2 GPIO clocks */
RCC_AHB1PeriphClockCmd(UART2_GPIO_RCC, ENABLE);
/* Enable USART2 clock */
/* Enable UART2 clock */
RCC_APB1PeriphClockCmd(RCC_APBPeriph_UART2, ENABLE);
#endif
#endif /* RT_USING_UART1 */
#ifdef RT_USING_UART3
/* Enable USART3 GPIO clocks */
/* Enable UART3 GPIO clocks */
RCC_AHB1PeriphClockCmd(UART3_GPIO_RCC, ENABLE);
/* Enable USART3 clock */
/* Enable UART3 clock */
RCC_APB1PeriphClockCmd(RCC_APBPeriph_UART3, ENABLE);
/* DMA clock enable */
RCC_APB1PeriphClockCmd(RCC_AHB1Periph_DMA1, ENABLE);
#endif
#ifdef RT_USING_UART6
/* Enable USART6 GPIO clocks */
RCC_AHB1PeriphClockCmd(UART6_GPIO_RCC, ENABLE);
/* Enable USART6 clock */
RCC_APB2PeriphClockCmd(RCC_APBPeriph_UART6, ENABLE);
#endif
#endif /* RT_USING_UART3 */
}
static void GPIO_Configuration(void)
......@@ -173,17 +298,17 @@ static void GPIO_Configuration(void)
/* Connect alternate function */
GPIO_PinAFConfig(UART1_GPIO, UART1_TX_PIN_SOURCE, GPIO_AF_USART1);
GPIO_PinAFConfig(UART1_GPIO, UART1_RX_PIN_SOURCE, GPIO_AF_USART1);
#endif
#endif /* RT_USING_UART1 */
#ifdef RT_USING_UART2
/* Configure USART2 Rx/tx PIN */
GPIO_InitStructure.GPIO_Pin = UART2_GPIO_TX | UART2_GPIO_RX;
GPIO_InitStructure.GPIO_Pin = UART2_GPIO_RX | UART2_GPIO_TX;
GPIO_Init(UART2_GPIO, &GPIO_InitStructure);
/* Connect alternate function */
GPIO_PinAFConfig(UART2_GPIO, UART2_TX_PIN_SOURCE, GPIO_AF_USART2);
GPIO_PinAFConfig(UART2_GPIO, UART2_RX_PIN_SOURCE, GPIO_AF_USART2);
#endif
#endif /* RT_USING_UART2 */
#ifdef RT_USING_UART3
/* Configure USART3 Rx/tx PIN */
......@@ -193,217 +318,74 @@ static void GPIO_Configuration(void)
/* Connect alternate function */
GPIO_PinAFConfig(UART3_GPIO, UART3_TX_PIN_SOURCE, GPIO_AF_USART3);
GPIO_PinAFConfig(UART3_GPIO, UART3_RX_PIN_SOURCE, GPIO_AF_USART3);
#endif
#ifdef RT_USING_UART6
/* Configure USART6 Rx/tx PIN */
GPIO_InitStructure.GPIO_Pin = UART6_GPIO_TX | UART6_GPIO_RX;
GPIO_Init(UART6_GPIO, &GPIO_InitStructure);
/* Connect alternate function */
GPIO_PinAFConfig(UART6_GPIO, UART6_TX_PIN_SOURCE, GPIO_AF_USART6);
GPIO_PinAFConfig(UART6_GPIO, UART6_RX_PIN_SOURCE, GPIO_AF_USART6);
#endif
#endif /* RT_USING_UART3 */
}
static void NVIC_Configuration(void)
static void NVIC_Configuration(struct stm32_uart* uart)
{
NVIC_InitTypeDef NVIC_InitStructure;
#ifdef RT_USING_UART1
/* Enable the USART1 Interrupt */
NVIC_InitStructure.NVIC_IRQChannel = USART1_IRQn;
NVIC_InitStructure.NVIC_IRQChannel = uart->irq;
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 3;
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
NVIC_Init(&NVIC_InitStructure);
#endif
#ifdef RT_USING_UART2
/* Enable the USART2 Interrupt */
NVIC_InitStructure.NVIC_IRQChannel = USART2_IRQn;
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1;
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 1;
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
NVIC_Init(&NVIC_InitStructure);
#endif
#ifdef RT_USING_UART3
/* Enable the USART3 Interrupt */
NVIC_InitStructure.NVIC_IRQChannel = USART3_IRQn;
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 1;
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
NVIC_Init(&NVIC_InitStructure);
/* Enable the DMA1 Channel2 Interrupt */
NVIC_InitStructure.NVIC_IRQChannel = DMA1_Stream1_IRQn;
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 1;
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
NVIC_Init(&NVIC_InitStructure);
#endif
#ifdef RT_USING_UART6
/* Enable the USART6 Interrupt */
NVIC_InitStructure.NVIC_IRQChannel = USART6_IRQn;
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1;
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 1;
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
NVIC_Init(&NVIC_InitStructure);
#endif
}
static void DMA_Configuration(void)
int stm32_hw_usart_init(void)
{
#if defined (RT_USING_UART3)
DMA_InitTypeDef DMA_InitStructure;
// /* Configure DMA Stream */
// DMA_InitStructure.DMA_Channel = DMA_CHANNEL;
// DMA_InitStructure.DMA_PeripheralBaseAddr = (uint32_t)SRC_Const_Buffer;
// DMA_InitStructure.DMA_Memory0BaseAddr = (uint32_t)DST_Buffer;
// DMA_InitStructure.DMA_DIR = DMA_DIR_MemoryToMemory;
// DMA_InitStructure.DMA_BufferSize = (uint32_t)BUFFER_SIZE;
// DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Enable;
// DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Enable;
// DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Word;
// DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_Word;
// DMA_InitStructure.DMA_Mode = DMA_Mode_Normal;
// DMA_InitStructure.DMA_Priority = DMA_Priority_High;
// DMA_InitStructure.DMA_FIFOMode = DMA_FIFOMode_Disable;
// DMA_InitStructure.DMA_FIFOThreshold = DMA_FIFOThreshold_Full;
// DMA_InitStructure.DMA_MemoryBurst = DMA_MemoryBurst_Single;
// DMA_InitStructure.DMA_PeripheralBurst = DMA_PeripheralBurst_Single;
// DMA_Init(DMA_STREAM, &DMA_InitStructure);
/* Configure DMA Stream */
DMA_InitStructure.DMA_Channel = DMA_Channel_0;
DMA_InitStructure.DMA_PeripheralBaseAddr = (uint32_t)(&USART3->DR);
DMA_InitStructure.DMA_Memory0BaseAddr = (uint32_t)0;
DMA_InitStructure.DMA_DIR = DMA_DIR_MemoryToPeripheral;
DMA_InitStructure.DMA_BufferSize = (uint32_t)0;
DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable;
DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Enable;
DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Word;
DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte;
DMA_InitStructure.DMA_Mode = DMA_Mode_Normal;
DMA_InitStructure.DMA_Priority = DMA_Priority_High;
DMA_InitStructure.DMA_FIFOMode = DMA_FIFOMode_Disable;
DMA_InitStructure.DMA_FIFOThreshold = DMA_FIFOThreshold_Full;
DMA_InitStructure.DMA_MemoryBurst = DMA_MemoryBurst_Single;
DMA_InitStructure.DMA_PeripheralBurst = DMA_PeripheralBurst_Single;
DMA_DeInit(UART3_TX_DMA);
DMA_Init(UART3_TX_DMA, &DMA_InitStructure);
// /* fill init structure */
// DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable;
// DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Enable;
// DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte;
// DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte;
// DMA_InitStructure.DMA_Mode = DMA_Mode_Normal;
// DMA_InitStructure.DMA_Priority = DMA_Priority_VeryHigh;
// DMA_InitStructure.DMA_M2M = DMA_M2M_Disable;
//
// /* DMA1 Channel5 (triggered by USART3 Tx event) Config */
// DMA_DeInit(UART3_TX_DMA);
// DMA_InitStructure.DMA_PeripheralBaseAddr = USART3_DR_Base;
// DMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralDST;
// DMA_InitStructure.DMA_MemoryBaseAddr = (u32)0;
// DMA_InitStructure.DMA_BufferSize = 0;
// DMA_Init(UART3_TX_DMA, &DMA_InitStructure);
DMA_ITConfig(UART3_TX_DMA, DMA_IT_TC | DMA_IT_TE, ENABLE);
// DMA_ClearFlag(DMA1_FLAG_TC5);
#endif
}
volatile USART_TypeDef * uart2_debug = USART2;
/*
* Init all related hardware in here
* rt_hw_serial_init() will register all supported USART device
*/
void rt_hw_usart_init()
{
USART_InitTypeDef USART_InitStructure;
struct stm32_uart* uart;
struct serial_configure config = RT_SERIAL_CONFIG_DEFAULT;
RCC_Configuration();
GPIO_Configuration();
NVIC_Configuration();
DMA_Configuration();
/* uart init */
#ifdef RT_USING_UART1
USART_InitStructure.USART_BaudRate = 115200;
USART_InitStructure.USART_WordLength = USART_WordLength_8b;
USART_InitStructure.USART_StopBits = USART_StopBits_1;
USART_InitStructure.USART_Parity = USART_Parity_No;
USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
USART_Init(USART1, &USART_InitStructure);
uart = &uart1;
/* register uart1 */
rt_hw_serial_register(&uart1_device, "uart1",
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
&uart1);
serial1.ops = &stm32_uart_ops;
serial1.config = config;
/* enable interrupt */
USART_ITConfig(USART1, USART_IT_RXNE, ENABLE);
#endif
NVIC_Configuration(&uart1);
#ifdef RT_USING_UART2
USART_InitStructure.USART_BaudRate = 115200;
USART_InitStructure.USART_WordLength = USART_WordLength_8b;
USART_InitStructure.USART_StopBits = USART_StopBits_1;
USART_InitStructure.USART_Parity = USART_Parity_No;
USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
USART_Init(USART2, &USART_InitStructure);
/* register UART1 device */
rt_hw_serial_register(&serial1,
"uart1",
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
uart);
#endif /* RT_USING_UART1 */
/* register uart2 */
rt_hw_serial_register(&uart2_device, "uart2",
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
&uart2);
#ifdef RT_USING_UART2
uart = &uart2;
/* Enable USART2 DMA Rx request */
USART_ITConfig(USART2, USART_IT_RXNE, ENABLE);
#endif
serial2.ops = &stm32_uart_ops;
serial2.config = config;
#ifdef RT_USING_UART3
USART_InitStructure.USART_BaudRate = 115200;
USART_InitStructure.USART_WordLength = USART_WordLength_8b;
USART_InitStructure.USART_StopBits = USART_StopBits_1;
USART_InitStructure.USART_Parity = USART_Parity_No;
USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
USART_Init(USART3, &USART_InitStructure);
NVIC_Configuration(&uart2);
// uart3_dma_tx.dma_channel= UART3_TX_DMA;
/* register UART1 device */
rt_hw_serial_register(&serial2,
"uart2",
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
uart);
#endif /* RT_USING_UART2 */
/* register uart3 */
rt_hw_serial_register(&uart3_device, "uart3",
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_DMA_TX,
&uart3);
#ifdef RT_USING_UART3
uart = &uart3;
/* Enable USART3 DMA Tx request */
USART_DMACmd(USART3, USART_DMAReq_Tx , ENABLE);
serial3.ops = &stm32_uart_ops;
serial3.config = config;
/* enable interrupt */
USART_ITConfig(USART3, USART_IT_RXNE, ENABLE);
#endif
NVIC_Configuration(&uart3);
#ifdef RT_USING_UART6
USART_InitStructure.USART_BaudRate = 9600;
USART_InitStructure.USART_WordLength = USART_WordLength_8b;
USART_InitStructure.USART_StopBits = USART_StopBits_1;
USART_InitStructure.USART_Parity = USART_Parity_No;
USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
USART_Init(USART6, &USART_InitStructure);
/* register UART3 device */
rt_hw_serial_register(&serial3,
"uart3",
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
uart);
#endif /* RT_USING_UART3 */
/* register uart6 */
rt_hw_serial_register(&uart6_device, "uart6",
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
&uart6);
#endif
return 0;
}
INIT_BOARD_EXPORT(stm32_hw_usart_init);
bsp/stm32f40x/drivers/usart.h
浏览文件 @ 6acf4a45
......@@ -18,6 +18,9 @@
#include <rthw.h>
#include <rtthread.h>
void rt_hw_usart_init(void);
#define UART_ENABLE_IRQ(n) NVIC_EnableIRQ((n))
#define UART_DISABLE_IRQ(n) NVIC_DisableIRQ((n))
int stm32_hw_usart_init(void);
#endif
bsp/stm32f40x/rtconfig.h
浏览文件 @ 6acf4a45
......@@ -2,14 +2,11 @@
#ifndef __RTTHREAD_CFG_H__
#define __RTTHREAD_CFG_H__
/* RT_GDB_STUB */
//#define RT_USING_GDB
/* RT_NAME_MAX*/
#define RT_NAME_MAX 8
/* RT_ALIGN_SIZE*/
#define RT_ALIGN_SIZE 8
#define RT_ALIGN_SIZE 4
/* PRIORITY_MAX */
#define RT_THREAD_PRIORITY_MAX 32
......@@ -20,7 +17,6 @@
/* SECTION: RT_DEBUG */
/* Thread Debug */
#define RT_DEBUG
#define RT_USING_OVERFLOW_CHECK
/* Using Hook */
......@@ -62,6 +58,16 @@
/* SECTION: Device System */
/* Using Device System */
#define RT_USING_DEVICE
#define RT_USING_DEVICE_IPC
/* Using serial framework */
#define RT_USING_SERIAL
#define RT_USING_UART1
#define RT_USING_UART2
#define RT_USING_UART3
/* Using GPIO pin framework */
#define RT_USING_PIN
/* SECTION: Console options */
#define RT_USING_CONSOLE
......@@ -75,7 +81,14 @@
#define FINSH_USING_DESCRIPTION
/* SECTION: device filesystem */
/* Using Device file system */
/* #define RT_USING_DFS */
/* the max number of mounted filesystem */
#define DFS_FILESYSTEMS_MAX 2
/* the max number of opened files */
#define DFS_FD_MAX 4
/* Using ELM FATFS */
//#define RT_USING_DFS_ELMFAT
#define RT_DFS_ELM_WORD_ACCESS
/* Reentrancy (thread safe) of the FatFs module. */
......@@ -87,12 +100,8 @@
/* Maximum sector size to be handled. */
#define RT_DFS_ELM_MAX_SECTOR_SIZE 512
#define RT_USING_DFS_ROMFS
/* the max number of mounted filesystem */
#define DFS_FILESYSTEMS_MAX 2
/* the max number of opened files */
#define DFS_FD_MAX 4
/* Using ROM file system */
// #define RT_USING_DFS_ROMFS
/* SECTION: lwip, a lighwight TCP/IP protocol stack */
/* #define RT_USING_LWIP */
......@@ -151,4 +160,7 @@
#define CHECKSUM_GEN_IP 0
#define CHECKSUM_GEN_UDP 0
/* RT_GDB_STUB */
//#define RT_USING_GDB
#endif
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或