// Copyright (c) 2018 PaddlePaddle Authors. All Rights Reserved. // // Licensed under the Apache License, Version 2.0 (the "License"); // you may not use this file except in compliance with the License. // You may obtain a copy of the License at // // http://www.apache.org/licenses/LICENSE-2.0 // // Unless required by applicable law or agreed to in writing, software // distributed under the License is distributed on an "AS IS" BASIS, // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. // See the License for the specific language governing permissions and // limitations under the License. #pragma once #include #include "paddle/fluid/framework/op_registry.h" #include "paddle/fluid/platform/for_range.h" #ifdef __NVCC__ #include #include "paddle/fluid/framework/array.h" #endif namespace paddle { namespace operators { class StackOp : public framework::OperatorWithKernel { public: using framework::OperatorWithKernel::OperatorWithKernel; void InferShape(framework::InferShapeContext *ctx) const override { PADDLE_ENFORCE_GT(ctx->Inputs("X").size(), 0, "Number of Inputs(X) must be larger than 0"); PADDLE_ENFORCE(ctx->HasOutput("Y"), "Output(Y) must exist."); auto input_dims = ctx->GetInputsDim("X"); for (size_t i = 1; i < input_dims.size(); ++i) { PADDLE_ENFORCE_EQ(input_dims[i], input_dims[0], "Dims of all Inputs(X) must be the same"); } // Only lod of X[0] would be shared with Y ctx->ShareLoD("X", /*->*/ "Y"); int axis = ctx->Attrs().Get("axis"); int rank = input_dims[0].size(); PADDLE_ENFORCE( axis >= -(rank + 1) && axis < rank + 1, "Attr(axis) must be inside [-(rank+1), rank+1), where rank = %d", rank); if (axis < 0) axis += (rank + 1); auto vec = framework::vectorize(input_dims[0]); vec.insert(vec.begin() + axis, input_dims.size()); ctx->SetOutputDim("Y", framework::make_ddim(vec)); } }; class StackOpMaker : public framework::OpProtoAndCheckerMaker { public: void Make() override { AddInput("X", "The input of stack op.").AsDuplicable(); AddOutput("Y", "The output of stack op."); AddAttr("axis", "The axis along which all of the Inputs(X) should be stacked.") .SetDefault(0); AddComment(R"DOC( Stack Operator. Stack all of the Inputs(X) into one tensor along Attr(axis). The dims of all Inputs(X) must be the same. )DOC"); } }; template struct StackFunctor { HOSTDEVICE StackFunctor(const VecXType &x, T *y, int n, int post) : x_(x), y_(y), n_(n), post_(post) {} HOSTDEVICE void operator()(int idx) { int i = idx / (n_ * post_); int which_x = idx / post_ - i * n_; int x_index = i * post_ + idx % post_; y_[idx] = x_[which_x][x_index]; } private: VecXType x_; T *y_; int n_; int post_; }; template struct StackGradFunctor { HOSTDEVICE StackGradFunctor(const VecDxType &dx, const T *dy, int n, int post) : dx_(dx), dy_(dy), n_(n), post_(post) {} HOSTDEVICE void operator()(int idx) { int i = idx / (n_ * post_); int which_x = idx / post_ - i * n_; int x_index = i * post_ + idx % post_; dx_[which_x][x_index] = dy_[idx]; } private: VecDxType dx_; const T *dy_; int n_; int post_; }; template static inline void StackFunctorForRange(const DeviceContext &ctx, const VecXType &x, T *y, int total_num, int n, int post) { platform::ForRange for_range(ctx, total_num); for_range(StackFunctor(x, y, n, post)); } template static inline void StackGradFunctorForRange(const DeviceContext &ctx, const VecDxType &dx, const T *dy, int total_num, int n, int post) { platform::ForRange for_range(ctx, total_num); for_range(StackGradFunctor(dx, dy, n, post)); } template class StackKernel : public framework::OpKernel { using Tensor = framework::LoDTensor; public: void Compute(const framework::ExecutionContext &ctx) const override { auto x = ctx.MultiInput("X"); auto *y = ctx.Output("Y"); int axis = ctx.Attr("axis"); if (axis < 0) axis += (x[0]->dims().size() + 1); int n = static_cast(x.size()); auto *y_data = y->mutable_data(ctx.GetPlace()); std::vector x_datas(n); for (int i = 0; i < n; i++) x_datas[i] = x[i]->data(); int pre = 1, post = 1; auto &dim = x[0]->dims(); for (auto i = 0; i < axis; ++i) pre *= dim[i]; for (auto i = axis; i < dim.size(); ++i) post *= dim[i]; #ifdef __NVCC__ int total_num = pre * n * post; auto &dev_ctx = ctx.template device_context(); thrust::device_vector device_x_vec(x_datas); auto x_data_arr = device_x_vec.data().get(); StackFunctorForRange(dev_ctx, x_data_arr, y_data, total_num, n, post); // Wait() must be called because device_x_vec may be destructed before // kernel ends dev_ctx.Wait(); #else auto x_data_arr = x_datas.data(); size_t x_offset = 0; size_t y_offset = 0; for (int i = 0; i < pre; i++) { for (int j = 0; j < n; j++) { std::memcpy(y_data + y_offset, x_data_arr[j] + x_offset, post * sizeof(T)); y_offset += post; } x_offset += post; } #endif } }; class StackOpGrad : public framework::OperatorWithKernel { public: using framework::OperatorWithKernel::OperatorWithKernel; void InferShape(framework::InferShapeContext *ctx) const override { PADDLE_ENFORCE(ctx->HasInput(framework::GradVarName("Y")), "Input(Y@Grad) must exist."); int axis = ctx->Attrs().Get("axis"); auto dy_dim = ctx->GetInputDim(framework::GradVarName("Y")); int rank = dy_dim.size(); PADDLE_ENFORCE(axis >= -rank && axis < rank, "Attr(axis) must be inside [-rank, rank), where rank = %d", rank); if (axis < 0) axis += rank; PADDLE_ENFORCE_EQ(ctx->Outputs(framework::GradVarName("X")).size(), static_cast(dy_dim[axis]), "Number of Outputs(X@Grad) is wrong"); auto vec = framework::vectorize(dy_dim); vec.erase(vec.begin() + axis); ctx->SetOutputsDim( framework::GradVarName("X"), std::vector(dy_dim[axis], framework::make_ddim(vec))); } }; class StackGradOpDescMaker : public framework::SingleGradOpDescMaker { public: using framework::SingleGradOpDescMaker::SingleGradOpDescMaker; protected: std::unique_ptr Apply() const override { std::unique_ptr op(new framework::OpDesc()); op->SetType("stack_grad"); op->SetInput(framework::GradVarName("Y"), OutputGrad("Y")); op->SetOutput(framework::GradVarName("X"), InputGrad("X", false)); op->SetAttrMap(Attrs()); return op; } }; template class StackGradKernel : public framework::OpKernel { using Tensor = framework::LoDTensor; public: void Compute(const framework::ExecutionContext &ctx) const override { auto *dy = ctx.Input(framework::GradVarName("Y")); auto dx = ctx.MultiOutput(framework::GradVarName("X")); int axis = ctx.Attr("axis"); if (axis < 0) axis += dy->dims().size(); int n = dy->dims()[axis]; std::vector dx_datas(n); // NOLINT for (int i = 0; i < n; i++) { dx_datas[i] = dx[i]->mutable_data(ctx.GetPlace()); } auto dy_data = dy->data(); int pre = 1; for (int i = 0; i < axis; ++i) pre *= dy->dims()[i]; int total_num = dy->numel(); int post = total_num / (n * pre); auto &dev_ctx = ctx.template device_context(); #ifdef __NVCC__ thrust::device_vector device_dx_vec(dx_datas); auto dx_data_arr = device_dx_vec.data().get(); #else auto dx_data_arr = dx_datas.data(); #endif StackGradFunctorForRange(dev_ctx, dx_data_arr, dy_data, total_num, n, post); #ifdef __NVCC__ // Wait() must be called because device_dx_vec may be destructed before // kernel ends dev_ctx.Wait(); #endif } }; } // namespace operators } // namespace paddle