# Copyright (c) 2018 PaddlePaddle Authors. All Rights Reserved. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. from __future__ import division import unittest import numpy as np from scipy.special import logit from scipy.special import expit from op_test import OpTest from paddle.fluid import core def l1loss(x, y, weight): n = x.shape[0] x = x.reshape((n, -1)) y = y.reshape((n, -1)) weight = weight.reshape((n, -1)) return (np.abs(y - x) * weight).sum(axis=1) def mse(x, y, weight): n = x.shape[0] x = x.reshape((n, -1)) y = y.reshape((n, -1)) weight = weight.reshape((n, -1)) return ((y - x)**2 * weight).sum(axis=1) def sce(x, label, weight): n = x.shape[0] x = x.reshape((n, -1)) label = label.reshape((n, -1)) weight = weight.reshape((n, -1)) sigmoid_x = expit(x) term1 = label * np.log(sigmoid_x) term2 = (1.0 - label) * np.log(1.0 - sigmoid_x) return ((-term1 - term2) * weight).sum(axis=1) def box_iou(box1, box2): b1_x1 = box1[0] - box1[2] / 2 b1_x2 = box1[0] + box1[2] / 2 b1_y1 = box1[1] - box1[3] / 2 b1_y2 = box1[1] + box1[3] / 2 b2_x1 = box2[0] - box2[2] / 2 b2_x2 = box2[0] + box2[2] / 2 b2_y1 = box2[1] - box2[3] / 2 b2_y2 = box2[1] + box2[3] / 2 b1_area = (b1_x2 - b1_x1) * (b1_y2 - b1_y1) b2_area = (b2_x2 - b2_x1) * (b2_y2 - b2_y1) inter_rect_x1 = max(b1_x1, b2_x1) inter_rect_y1 = max(b1_y1, b2_y1) inter_rect_x2 = min(b1_x2, b2_x2) inter_rect_y2 = min(b1_y2, b2_y2) inter_area = max(inter_rect_x2 - inter_rect_x1, 0) * max( inter_rect_y2 - inter_rect_y1, 0) return inter_area / (b1_area + b2_area + inter_area) def build_target(gtboxes, gtlabel, attrs, grid_size): n, b, _ = gtboxes.shape ignore_thresh = attrs["ignore_thresh"] anchors = attrs["anchors"] class_num = attrs["class_num"] input_size = attrs["input_size"] an_num = len(anchors) // 2 conf_mask = np.ones((n, an_num, grid_size, grid_size)).astype('float32') obj_mask = np.zeros((n, an_num, grid_size, grid_size)).astype('float32') tx = np.zeros((n, an_num, grid_size, grid_size)).astype('float32') ty = np.zeros((n, an_num, grid_size, grid_size)).astype('float32') tw = np.zeros((n, an_num, grid_size, grid_size)).astype('float32') th = np.zeros((n, an_num, grid_size, grid_size)).astype('float32') tweight = np.zeros((n, an_num, grid_size, grid_size)).astype('float32') tconf = np.zeros((n, an_num, grid_size, grid_size)).astype('float32') tcls = np.zeros( (n, an_num, grid_size, grid_size, class_num)).astype('float32') for i in range(n): for j in range(b): if gtboxes[i, j, :].sum() == 0: continue gt_label = gtlabel[i, j] gx = gtboxes[i, j, 0] * grid_size gy = gtboxes[i, j, 1] * grid_size gw = gtboxes[i, j, 2] * input_size gh = gtboxes[i, j, 3] * input_size gi = int(gx) gj = int(gy) gtbox = [0, 0, gw, gh] max_iou = 0 for k in range(an_num): anchor_box = [0, 0, anchors[2 * k], anchors[2 * k + 1]] iou = box_iou(gtbox, anchor_box) if iou > max_iou: max_iou = iou best_an_index = k if iou > ignore_thresh: conf_mask[i, best_an_index, gj, gi] = 0 conf_mask[i, best_an_index, gj, gi] = 1 obj_mask[i, best_an_index, gj, gi] = 1 tx[i, best_an_index, gj, gi] = gx - gi ty[i, best_an_index, gj, gi] = gy - gj tw[i, best_an_index, gj, gi] = np.log(gw / anchors[2 * best_an_index]) th[i, best_an_index, gj, gi] = np.log( gh / anchors[2 * best_an_index + 1]) tweight[i, best_an_index, gj, gi] = 2.0 - gtboxes[ i, j, 2] * gtboxes[i, j, 3] tconf[i, best_an_index, gj, gi] = 1 tcls[i, best_an_index, gj, gi, gt_label] = 1 return (tx, ty, tw, th, tweight, tconf, tcls, conf_mask, obj_mask) def YoloV3Loss(x, gtbox, gtlabel, attrs): n, c, h, w = x.shape an_num = len(attrs['anchors']) // 2 class_num = attrs["class_num"] x = x.reshape((n, an_num, 5 + class_num, h, w)).transpose((0, 1, 3, 4, 2)) pred_x = x[:, :, :, :, 0] pred_y = x[:, :, :, :, 1] pred_w = x[:, :, :, :, 2] pred_h = x[:, :, :, :, 3] pred_conf = x[:, :, :, :, 4] pred_cls = x[:, :, :, :, 5:] tx, ty, tw, th, tweight, tconf, tcls, conf_mask, obj_mask = build_target( gtbox, gtlabel, attrs, x.shape[2]) obj_weight = obj_mask * tweight obj_mask_expand = np.tile( np.expand_dims(obj_mask, 4), (1, 1, 1, 1, int(attrs['class_num']))) loss_x = sce(pred_x, tx, obj_weight) loss_y = sce(pred_y, ty, obj_weight) loss_w = l1loss(pred_w, tw, obj_weight) loss_h = l1loss(pred_h, th, obj_weight) loss_obj = sce(pred_conf, tconf, conf_mask) loss_class = sce(pred_cls, tcls, obj_mask_expand) # print("python loss_xy: ", loss_x + loss_y) # print("python loss_wh: ", loss_w + loss_h) # print("python loss_obj: ", loss_obj) # print("python loss_class: ", loss_class) return loss_x + loss_y + loss_w + loss_h + loss_obj + loss_class class TestYolov3LossOp(OpTest): def setUp(self): self.initTestCase() self.op_type = 'yolov3_loss' x = logit(np.random.uniform(0, 1, self.x_shape).astype('float32')) gtbox = np.random.random(size=self.gtbox_shape).astype('float32') gtlabel = np.random.randint(0, self.class_num, self.gtbox_shape[:2]).astype('int32') self.attrs = { "anchors": self.anchors, "class_num": self.class_num, "ignore_thresh": self.ignore_thresh, "input_size": self.input_size, } self.inputs = {'X': x, 'GTBox': gtbox, 'GTLabel': gtlabel} self.outputs = {'Loss': YoloV3Loss(x, gtbox, gtlabel, self.attrs)} def test_check_output(self): place = core.CPUPlace() self.check_output_with_place(place, atol=1e-3) def test_check_grad_ignore_gtbox(self): place = core.CPUPlace() self.check_grad_with_place( place, ['X'], 'Loss', no_grad_set=set(["GTBox", "GTLabel"]), max_relative_error=0.31) def initTestCase(self): self.anchors = [12, 12] self.class_num = 5 self.ignore_thresh = 0.5 self.input_size = 416 self.x_shape = (1, len(self.anchors) // 2 * (5 + self.class_num), 3, 3) self.gtbox_shape = (1, 5, 4) if __name__ == "__main__": unittest.main()