提交 7046e024 编写于 作者: K Kavya Srinet

Updated the design doc for distributed training architecture

上级 523e4a92
...@@ -2,106 +2,70 @@ ...@@ -2,106 +2,70 @@
## Abstract ## Abstract
PaddlePaddle v0.10.0 uses the "trainer-parameter server" PaddlePaddle version 0.10.0 uses the "trainer-parameter server" architecture. We run multiple instances of trainers (where each trainer runs the same model) and parameter servers for distributed training. This architecture serves well, but has few limitations:
architecture. We run multiple replicated instances of trainers (runs
the same code written by the user) and parameter servers for
distributed training. This architecture served us well, but has some
limitations:
1. Need to write special code to handle tasks which should only be run 1. There is a need to write special code that handles tasks which should only be run on a single trainer. E.g., initializing the model, saving the model etc.
by a single trainer. E.g., initializing model and saving model.
2. Model parallelism is hard: need to write if-else branches conditioned 2. Model parallelism is hard: It would need all the if-else branches conditioned on the trainer ID to partition the model onto the trainers, and eventually manually writing out the inter-model-shard communication code to communicate between different trainers.
on the trainer ID to partition model onto each trainer, and manually
write the inter-model-shard communication code.
3. The user can not directly specify the parameter update rule: need 3. The user can not directly specify the parameter update rule: This would need to modify the parameter server code and compile a new binary. This makes things more complicated for researchers: A lot of extra effort is required to make this work. Besides, the training job submission program may not allow running arbitrary binaries.
to modify the parameter server C++ code and compile a new
binary. This adds complication for researchers: A lot of extra
effort is required. Besides, the training job submission program
may not allow running arbitrary binaries.
This design doc discusses PaddlePaddle's new distributed training This design doc discusses PaddlePaddle's new distributed training architecture that addresses the above mentioned limitations.
architecture that addresses the above limitations.
## Analysis ## Analysis
We will assume the user writes the trainer program by Python, the same The assumption is that the user writes the trainer program in either Python or C++.
analysis holds if the trainer program is written in C++.
### Limitation 1 ### Limitation 1
If we look at the Python code that the user writes, there are two There are two basic functionalities in the trainer program:
kinds of functionalities:
- The training logic such as load / save model and print log. 1. The training logic such as loading / saving the model and printing out the logs.
- The neural network definition such as the definition of the data 2. The neural network definition such as the definition of the data layer, the fully connected layer, the cost function and the
layer, the fully connected layer, the cost function and the
optimizer. optimizer.
When we training with PaddlePaddle v0.10.0 distributedly, multiple When we train using PaddlePaddle v0.10.0 in a distributed fashion, multiple instances of the same Python code are run on different nodes, hence both: the
replicated Python instances are running on different nodes: both the training logic as well as the neural network computation logic, is replicated.
training logic and the neural network computation is replicated.
The tasks that should only run once all belong to the training logic, The tasks that only need to be run once belong to the training logic. Hence if we only replicate the neural network computation part, and do **not**
if we only replicate the neural network computation, but do **not** replicate the training logic, the limitation mentioned above can be avoided.
replicate the training logic, the limitation could be solved.
### Limitation 2 ### Limitation 2
Model parallelism means running a single model on multiple nodes by Model parallelism means that a single model is partitioned into different components and each node runs one of the component separately. This comes at the extra cost of managing the
partitioning the model onto different nodes and managing the inter-model-shard communication between nodes.
inter-model-shard communications.
PaddlePaddle should be able to modify the nerual network computation PaddlePaddle should ideally be able to modify the neural network computation and figure out the support for model parallelism automatically. However, the
definition to support model parallelism automatically. However, the computation is only specified in Python code which sits outside of PaddlePaddle, hence PaddlePaddle can not support the feature in this setup.
computation is only specified in Python code, and PaddlePaddle can not
modify Python code.
Just like compiler uses a intermediate representation (IR) so that Similar to how a compiler uses an intermediate representation (IR) so that the programmer does not need to manually optimize their code for most of the cases, we can have an intermediate representation in PaddlePaddle as well. The compiler optimizes the IR as follows:
programmer does not need to manually optimize their code in most of
the cases - the compiler will optimize the IR:
<img src="src/compiler.png"/> <img src="src/compiler.png"/>
We can have our own IR too: PaddlePaddle can support model parallel by PaddlePaddle can support model parallelism by converting the IR so that the user no longer needs to manually perform the computation and operations in the Python component:
converting the IR so the user no longer need to manually do it in
Python:
<img src="src/paddle-compile.png"/> <img src="src/paddle-compile.png"/>
The IR for PaddlePaddle after refactor is called `Block`, it specifies The IR for PaddlePaddle after refactoring is called a `Block`, it specifies the computation dependency graph and the variables used in the computation.
the computation dependency graph and the variables used in the
computation.
### Limitation 3 ### Limitation 3
The user can not directly specify the parameter update rule for the The user can not directly specify the parameter update rule for the parameter server in the Python module, since the parameter server does not use the same computation definition as the trainer. Instead, the update rule is baked inside the parameter server. The user can not specify the update rule explicitly.
parameter server because the parameter server does not use the same
computation definition as the trainer. Instead, the update rule is
baked in the parameter server. The user can not specify the update
rule in the same way of specifying the trainer computation.
This could be fixed by making the parameter server run the same This could be fixed by making the parameter server run the same computation definition as the trainer (the user's Python module). For a detailed explanation, refer to this document -
computation definition as the trainer. For a detailed explanation,
please
see
[Design Doc: Operation Graph Based Parameter Server](./dist_train.md) [Design Doc: Operation Graph Based Parameter Server](./dist_train.md)
## Distributed Training Architecture ## Distributed Training Architecture
The new distributed training architecture can address the above The revamped distributed training architecture can address the above discussed limitations. Below is the illustration of how it does so:
limitations. Below is the illustration:
<img src="src/distributed_architecture.png"/> <img src="src/distributed_architecture.png"/>
The architecture includes major components: *PaddlePaddle Python*, The major components in the architecture are: *PaddlePaddle Python*, *PaddlePaddle converter* and *PaddlePaddle runtime*.
*PaddlePaddle converter* and *PaddlePaddle runtime*:
### PaddlePaddle Python ### PaddlePaddle Python
PaddlePaddle Python is the Python library that user's Python trainer PaddlePaddle Python is the Python library that user's Python code invokes, to read the data. build the neural network topology, start training, etc.
invoke to build the neural network topology, start training, etc.
```Python ```Python
paddle.init() paddle.init()
...@@ -117,102 +81,60 @@ for i in range(1000): ...@@ -117,102 +81,60 @@ for i in range(1000):
print cost_val print cost_val
``` ```
The code above is a typical Python trainer code, the neural network The above code is what a typical Python trainer code is, the neural network topology is built using the helper functions such as `paddle.layer.fc`. Training is done by calling `session.eval` iteratively.
topology is built using helper functions such as
`paddle.layer.fc`. The training is done by calling `session.eval`
iteratively.
#### session.eval #### session.eval
As shown in the graph, `session.eval` sends the IR and the evaluation As shown in the graph, `session.eval` sends the IR and the evaluation inputs or targets to the PaddlePaddle cluster for evaluation.
inputs/targets to the PaddlePaddle cluster for evaluation. The The targets can be any variable in the computation graph. When the target is say, the `optimizer` variable, the neural network will be optimized once. When the target is the `cost` variable, `session.eval` returns the cost value. Based on what the target is, an appropriate action is taken.
targets can be any variable in the computation graph. When the target
is the `optimizer` variable, the neural network will be optimized
once. When the target is the `cost` variable, `session.eval` returns
the cost value.
The Python `session` is a wrapper of the C++ `Session` class. For more The Python `session` is a wrapper of the C++ `Session` class. For more information about `Session`, refer to this document - [Design Doc: Session](./session.md).
information about `Session`, please
see [Design Doc: Session](./session.md).
### PaddlePaddle Converter ### PaddlePaddle Converter
PaddlePaddle converter automatically converts the IR in the request The PaddlePaddle converter automatically converts the IR in the request (IR and evaluation inputs/targets) from PaddlePaddle Python to partitioned IRs and dispatches the new IRs and evaluation inputs/targets to different PaddlePaddle runtimes. Below are the steps that are followed :
(IR and evaluation inputs/targets) from PaddlePaddle Python to new
partitioned IRs and dispatch the new IRs and evaluation inputs/targets
to different PaddlePaddle runtimes. Below are the steps:
1. Add `feed` OP that feeds the eval inputs, and `fetch` OP that 1. Add a `feed` OP that feeds the eval inputs, and a `fetch` OP that fetches the eval targets to the IR.
fetches the eval targets to the IR.
1. Extract a new computation (sub)graph with `feed` and `fetch` OP as 2. Extract a new computation (sub)graph with the `feed` and `fetch` OPs as the boundary. The runtime does not need to run the OP that is not dependent on the `fetch` OP.
the boundary. The runtime does not need to run the OP that is not
dependent by the `fetch` OP.
1. Optimizes the computation graph. 3. Optimize the computation graph.
1. Place the OPs in the graph onto different devices on different 4. Place the OPs in the graph onto different devices on different PaddlePaddle runtime according to a placement algorithm and the device constraints specified by the user.
PaddlePaddle runtime according to a placement algorithm and device
constraint specified by the user.
1. Partition the graph according to runtime boundaries and add `send` / 5. Partition the graph according to runtime boundaries and add `send` / `recv` OP pair on the runtime boundaries.
`recv` OP pair on the runtime boundaries.
1. Dispatch the partitioned graph to different PaddlePaddle runtimes. 6. Dispatch the partitioned graph to different PaddlePaddle runtimes.
1. PaddlePaddle runtimes with the `fetch` OP reports evaluation 7. PaddlePaddle runtimes with the `fetch` OP reports evaluation results back to the converter, the converter reports the evaluation results back to the PaddlePaddle Python.
results back to the converter, the convert reports the evaluation
results back to the PaddlePaddle Python.
The output IRs will be cached to optimize the conversion latency. The output IRs will be cached to optimize the conversion latency.
#### Placement Algorithm #### Placement Algorithm
Our first implementation will only support "trainer-parameter server" Our first implementation will only support "trainer-parameter server" placement: the parameters, initializers, and optimizers are all placed on the PaddlePaddle runtimes with the parameter server role. Everything else will be placed on the PaddlePaddle runtimes with the trainer role. This has the same functionality as the "trainer-parameter server" architecture of PaddlePaddle v0.10.0, but is more generic and flexible.
placement: the parameters, initializers, and optimizers are placed on
the PaddlePaddle runtimes with the parameter server role. And
everything else will be placed on the PaddlePaddle runtimes with the
trainer role. This has the same functionality of our
"trainer-parameter server" architecture of PaddlePaddle v0.10.0, but
is more general and flexible.
In the future, we will implement the general placement algorithm, In the future, a more general placement algorithm should be implemented, which makes placements according to the input IR, and a model of device computation time and device communication time. Model parallelism requires the generic placement algorithm.
which makes placements according to the input IR, and a model of
device computation time and device communication time. Model
parallelism requires the general placement algorithm.
### PaddlePaddle Runtime ### PaddlePaddle Runtime
The PaddlePaddle runtime owns multiple devices (e.g., CPUs, GPUs) and The PaddlePaddle runtime owns multiple devices (e.g., CPUs, GPUs) and runs the IR. The runtime does not need to do OP placement since it is already done by the converter.
runs the IR. The runtime does not need to do OP placement since it's
already done by the converter.
### Local Training Architecture ### Local Training Architecture
The local training architecture will be the same as the distributed The local training architecture will be the same as the distributed training architecture, the difference is that everything runs locally, and there is just one PaddlePaddle runtime:
training architecture, the differences are everything runs locally,
and there is just one PaddlePaddle runtime:
<img src="src/local_architecture.png"/> <img src="src/local_architecture.png"/>
### Training Data ### Training Data
In PaddlePaddle v0.10.0, training data is typically read In PaddlePaddle v0.10.0, training data is typically read with a [data reader](../reader/README.md) from Python. This approach is no longer efficient when training in a distributed fashion since the Python process no longer runs on the same node with the trainer processes. The Python reader will need to read from the distributed filesystem (assuming it has the required access) and send to the trainers, doubling the network traffic.
with [data reader](../reader/README.md) from Python. This approach is
no longer efficient when training distributedly since the Python When doing distributed training, the user can still use Python data reader: the training data are sent with `session.eval`. However this should be used for debugging purpose only. The users are encouraged to use the read data OPs.
process no longer runs on the same node with the trainer processes,
the Python reader will need to read from the distributed filesystem
(assuming it has the access) and send to the trainers, doubling the
network traffic.
When doing distributed training, the user can still use Python data
reader: the training data are sent with `session.eval`. However should
be used for debugging purpose only. The users are encouraged to use
the read data OPs.
## References: ## References:
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册